How Do I see components

I have a series of components that I assign various values (text) to.  We added a TabNavigator to reduce the vertical space that was being taken and now the components within it are null and won't accept the values that they did before the TabNavigator was added.
I"m assuming that with the TabNavigator comes a different visibility.  Within the mxml:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application
  xmlns:mx="http://www.adobe.com/2006/mxml"
  xmlns:DHSComp="components.*"
  initialize="setInitAccessible();"
  applicationComplete="setInitLanguage();"
  backgroundColor="#dedacf"
  layout="absolute"
  borderStyle="inset"
  borderThickness="2"
  paddingLeft="10"
  paddingRight="10"
  paddingTop="10"
  paddingBottom="10"
  height="100%"
  width="100%"
  verticalScrollPolicy="on">
I don't know of an event that is after "applicationComplete".  The call is to:
  <mx:Script>
    <![CDATA[
        public function setInitLanguage():void {
            resetEnglish();
        public function setInitAccessible():void {
            getXMLURL();
            accessibleSet();
    ]]>
  </mx:Script>
Within the reset:
public function resetEnglish():void {
    // all "get" are in DHSclasses/FSLangEnglish.as
    pageSNAPText = English.getPageSNAPText();
... // these work OK
    if (currentState != "Result") {
        resetEnglishBase();                        // scripts/FSLangEngBase.as
The problem comes up in the next call.  The prior one and the next one are both scripts included in the mxml file:
public function resetEnglishBase():void {
    // reset inputform (base) to English
    // all "get" are in DHSclasses/FSLangEnglish.as
    householdInformationPanel.title = English.getHouseholdInformationLabel();
    householdInformationPanel.toolTip = English.getHouseholdInformationTT();
The "householdInformationPanel.title" shows as a null when the TabNavigator is included and not when it is not.
The question becomes how do I get the title to work when a TabNavigator is included?

You, sir, are a gentleman and a scholar.  That worked - thanks!

Similar Messages

  • How to pass/share components between different JPanels/Container

    Dear Friends,
    I know here a lot Java Guru, I met a problem below.
    How can I pass components between different JPanels??
    here, ListPanelMain.java is main,
    When I click a tree node in splitPane, I can see all its children on the right splitpane, but I hope they can be seen on another Panel called "ListRightPane.java"
    How to do it??
    Why cannot pass??
    [1]. main Program:
    package swing.com.test.test;
    import javax.swing.JFrame;
    import java.awt.BorderLayout;
    import java.awt.event.WindowAdapter;
    import java.awt.event.WindowEvent;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    import javax.swing.JSplitPane;
    import javax.swing.JTextArea;
    import java.io.Serializable;
    import swing.com.test.test.ListPanel;
    import java.awt.GridLayout;
    public class ListPanelMain implements java.io.Serializable{
         private JFrame frame;
         * Launch the application
         * @param args
         public static void main(String args[]) {
              try {
                   ListPanelMain window = new ListPanelMain();
                   window.frame.setVisible(true);
              } catch (Exception e) {
                   e.printStackTrace();
         * Create the application
         public ListPanelMain() {
              initialize();
         * Initialize the contents of the frame
         private void initialize() {
              frame = new JFrame("FileTreePanelMain");
              frame.setBounds(100, 100, 900, 675);
         //     FieTreePanelComm      ftreecomm                = new      FieTreePanelComm();
              ListPanel                ftree                     = new      ListPanel("C:\\");
    //          ListAllFile           ftree                     = new      ListAllFile("C:\\");
         //     FileTreePanelText      fileTreePanelText      = new      FileTreePanelText(ftreecomm);
              frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
              final JPanel panel = new JPanel();
              panel.setLayout(new GridLayout(0, 2));
              frame.getContentPane().add(panel, BorderLayout.CENTER);
         //     final JSplitPane splitPane = new JSplitPane();
         //     frame.getContentPane().add(splitPane, BorderLayout.CENTER);
         //     splitPane.setLeftComponent(ftree);
              panel.add(ftree);
              final ListRightPanel listRightPanel = new ListRightPanel(ftree);
              //splitPane.setRightComponent(listRightPanel);
              panel.add(listRightPanel);
         frame.addWindowListener(new WindowAdapter() {
         public void windowClosing(WindowEvent e) {
         System.exit(0);
         frame.pack();
         frame.setVisible(true);
    [2]. Program 2:
    package swing.com.test.test;
    //File System Tree
    import java.awt.BorderLayout;
    import java.awt.Color;
    import java.awt.GridLayout;
    import java.io.File;
    import java.util.Iterator;
    import java.util.Vector;
    import javax.swing.JFrame;
    import javax.swing.JScrollPane;
    import javax.swing.JSplitPane;
    import javax.swing.JTextArea;
    import javax.swing.JTree;
    import javax.swing.JPanel;
    import javax.swing.event.TreeModelEvent;
    import javax.swing.event.TreeModelListener;
    import javax.swing.event.TreeSelectionEvent;
    import javax.swing.event.TreeSelectionListener;
    import javax.swing.tree.TreeModel;
    import javax.swing.tree.TreePath;
    import java.io.Serializable;
    public class ListPanel extends JPanel implements Serializable{
    protected JTree fileTree;
    private FileSystemModel fileSystemModel;
    private JTextArea ltextArea = new JTextArea();
    protected JTextArea fileDetailsTextArea = new JTextArea();
    private String str = "";
         public String getlTextArea() {
                   //textArea.getText();
                   return str;
         public String setlTextArea(String ta) {
                   ltextArea.setText(ta);
                   str = ta;
                   return str;
    public ListPanel(String directory) {
    //super("JTree FileSystem Viewer");
                   setLayout(new BorderLayout());
                   final JPanel panel = new JPanel();
                   panel.setLayout(new BorderLayout());
              add(panel, BorderLayout.CENTER);
    fileDetailsTextArea.setEditable(false);
    fileSystemModel = new FileSystemModel(new File(directory));
    fileTree = new JTree(fileSystemModel);
    fileTree.setEditable(true);
    fileTree.addTreeSelectionListener(new TreeSelectionListener() {
    public void valueChanged(TreeSelectionEvent event) {
    System.out.println("1. What we save is: getlTextArea() =" + getlTextArea() );
    File file = (File) fileTree.getLastSelectedPathComponent();
    fileDetailsTextArea.setText(getFileDetails(file));
    final ListRightPanel lrp = new ListRightPanel(this);
    lrp.textArea.setText(getFileDetails(file));
    setlTextArea(getFileDetails(file));
    System.out.println("2. What we save is: getlTextArea() =" + getlTextArea() );
              final JSplitPane splitPane = new JSplitPane();
              panel.add(splitPane, BorderLayout.CENTER);
              final JPanel panel_1 = new JPanel();
              splitPane.setLeftComponent(panel_1);
              panel_1.add(new JScrollPane(fileTree));
              final JPanel panel_2 = new JPanel();
              splitPane.setRightComponent(panel_2);
              panel_2.add(new JScrollPane(fileDetailsTextArea));
    setVisible(true);
    private String getFileDetails(File file) {
    if (file == null)
    return "";
    StringBuffer buffer = new StringBuffer();
    if (file.listFiles()!=null){
         for (int i=0; i< file.listFiles().length; i++){
         buffer.append(((file.listFiles())) + "\n");
         System.out.println("List all files");
    return buffer.toString();
    public static void main(String args[]) {
    new ListPanel("c:\\");
    class FileSystemModel implements TreeModel {
    private File root;
    private Vector listeners = new Vector();
    public FileSystemModel(File rootDirectory) {
    root = rootDirectory;
    public Object getRoot() {
    return root;
    public Object getChild(Object parent, int index) {
    File directory = (File) parent;
    String[] children = directory.list();
    return new TreeFile(directory, children[index]);
    public int getChildCount(Object parent) {
    File file = (File) parent;
    if (file.isDirectory()) {
    String[] fileList = file.list();
    if (fileList != null)
    return file.list().length;
    return 0;
    public boolean isLeaf(Object node) {
    File file = (File) node;
    return file.isFile();
    public int getIndexOfChild(Object parent, Object child) {
    File directory = (File) parent;
    File file = (File) child;
    String[] children = directory.list();
    for (int i = 0; i < children.length; i++) {
    if (file.getName().equals(children[i])) {
    return i;
    return -1;
    public void valueForPathChanged(TreePath path, Object value) {
    File oldFile = (File) path.getLastPathComponent();
    String fileParentPath = oldFile.getParent();
    String newFileName = (String) value;
    File targetFile = new File(fileParentPath, newFileName);
    oldFile.renameTo(targetFile);
    File parent = new File(fileParentPath);
    int[] changedChildrenIndices = { getIndexOfChild(parent, targetFile) };
    Object[] changedChildren = { targetFile };
    fireTreeNodesChanged(path.getParentPath(), changedChildrenIndices, changedChildren);
    private void fireTreeNodesChanged(TreePath parentPath, int[] indices, Object[] children) {
    TreeModelEvent event = new TreeModelEvent(this, parentPath, indices, children);
    Iterator iterator = listeners.iterator();
    TreeModelListener listener = null;
    while (iterator.hasNext()) {
    listener = (TreeModelListener) iterator.next();
    listener.treeNodesChanged(event);
    public void addTreeModelListener(TreeModelListener listener) {
    listeners.add(listener);
    public void removeTreeModelListener(TreeModelListener listener) {
    listeners.remove(listener);
    private class TreeFile extends File {
    public TreeFile(File parent, String child) {
    super(parent, child);
    public String toString() {
    return getName();
    [3]. Program 3:
    package swing.com.test.test;
    import java.awt.BorderLayout;
    import java.io.File;
    import javax.swing.JPanel;
    import javax.swing.JTextArea;
    import javax.swing.JTree;
    import javax.swing.event.TreeModelEvent;
    import javax.swing.event.TreeModelListener;
    import javax.swing.event.TreeSelectionEvent;
    import javax.swing.event.TreeSelectionListener;
    import javax.swing.tree.TreeModel;
    import javax.swing.tree.TreePath;
    import java.io.Serializable;
    public class ListRightPanel extends JPanel implements TreeSelectionListener, Serializable{
         protected JTextArea textArea;
    //     protected ListAllFile laf;
    private String str = "";
              public String getlTextArea() {
                        //textArea.getText();
                        return str;
              public String setlTextArea(String ta) {
                        str = ta;
                        return str;
         * Create the panel
         public ListRightPanel(ListPanel laff) {
              super();
              setLayout(new BorderLayout());
              final JPanel panel = new JPanel();
              panel.setLayout(new BorderLayout());
              add(panel, BorderLayout.CENTER);
              textArea = new JTextArea();
    final String st = laff.getlTextArea();
    System.out.println("####################################");
    System.out.println("st=" + st);
         laff.fileTree.addTreeSelectionListener(new TreeSelectionListener() {
         public void valueChanged(TreeSelectionEvent event) {
         //laff.textArea.setText(getFileDetails(file));
              textArea.setText(getlTextArea());
         System.out.println("ListRightPanel Was Invoked from ListPanel!!getlTextArea() =" + getlTextArea() );
         System.out.println("st=" + st);
              panel.add(textArea, BorderLayout.CENTER);
         public void valueChanged(TreeSelectionEvent e){};
    It is runnable program, just compile and run it in Console is ok,
    Regards
    Sunny

    Thnaks, code post again, see
    [1]. package swing.com.test.test;
    import javax.swing.JFrame;
    import java.awt.BorderLayout;
    import java.awt.event.WindowAdapter;
    import java.awt.event.WindowEvent;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    import javax.swing.JSplitPane;
    import javax.swing.JTextArea;
    import java.io.Serializable;
    import swing.com.test.test.ListPanel;
    import java.awt.GridLayout;
    public class ListPanelMain implements java.io.Serializable{
         private JFrame frame;
          * Launch the application
          * @param args
         public static void main(String args[]) {
              try {
                   ListPanelMain window = new ListPanelMain();
                   window.frame.setVisible(true);
              } catch (Exception e) {
                   e.printStackTrace();
          * Create the application
         public ListPanelMain() {
              initialize();
          * Initialize the contents of the frame
         private void initialize() {
              frame = new JFrame("FileTreePanelMain");
              frame.setBounds(100, 100, 900, 675);
         //     FieTreePanelComm      ftreecomm                = new       FieTreePanelComm();
              ListPanel                 ftree                     = new      ListPanel("C:\\");
    //          ListAllFile            ftree                     = new      ListAllFile("C:\\");
         //     FileTreePanelText      fileTreePanelText      = new      FileTreePanelText(ftreecomm);
              frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
              final JPanel panel = new JPanel();
              panel.setLayout(new GridLayout(0, 2));
              frame.getContentPane().add(panel, BorderLayout.CENTER);
         //     final JSplitPane splitPane = new JSplitPane();
         //     frame.getContentPane().add(splitPane, BorderLayout.CENTER);
         //     splitPane.setLeftComponent(ftree);
              panel.add(ftree);
              final ListRightPanel listRightPanel = new ListRightPanel(ftree);
              //splitPane.setRightComponent(listRightPanel);
              panel.add(listRightPanel);
                frame.addWindowListener(new WindowAdapter() {
                     public void windowClosing(WindowEvent e) {
                         System.exit(0);
                 frame.pack();
                 frame.setVisible(true);
    }[2] Program 2
    package swing.com.test.test;
    //File System Tree
    import java.awt.BorderLayout;
    import java.awt.Color;
    import java.awt.GridLayout;
    import java.io.File;
    import java.util.Iterator;
    import java.util.Vector;
    import javax.swing.JFrame;
    import javax.swing.JScrollPane;
    import javax.swing.JSplitPane;
    import javax.swing.JTextArea;
    import javax.swing.JTree;
    import javax.swing.JPanel;
    import javax.swing.event.TreeModelEvent;
    import javax.swing.event.TreeModelListener;
    import javax.swing.event.TreeSelectionEvent;
    import javax.swing.event.TreeSelectionListener;
    import javax.swing.tree.TreeModel;
    import javax.swing.tree.TreePath;
    import java.io.Serializable;
    public class ListPanel extends JPanel implements Serializable{
      protected JTree fileTree;
      private FileSystemModel fileSystemModel;
      private JTextArea ltextArea = new JTextArea();
      protected JTextArea fileDetailsTextArea = new JTextArea();
      private String str = "";
         public  String getlTextArea()  {
                   //textArea.getText();
                      return str;
         public  String setlTextArea(String ta)  {
                   ltextArea.setText(ta);
                   str = ta;
                      return str;
      public ListPanel(String directory) {
        //super("JTree FileSystem Viewer");
                   setLayout(new BorderLayout());
                   final JPanel panel = new JPanel();
                   panel.setLayout(new BorderLayout());
                  add(panel, BorderLayout.CENTER);
        fileDetailsTextArea.setEditable(false);
        fileSystemModel = new FileSystemModel(new File(directory));
        fileTree = new JTree(fileSystemModel);
        fileTree.setEditable(true);
        fileTree.addTreeSelectionListener(new TreeSelectionListener() {
          public void valueChanged(TreeSelectionEvent event) {
            System.out.println("1. What we save is: getlTextArea() =" + getlTextArea() );
            File file = (File) fileTree.getLastSelectedPathComponent();
            fileDetailsTextArea.setText(getFileDetails(file));
            final ListRightPanel lrp = new ListRightPanel(this);
            lrp.textArea.setText(getFileDetails(file));
            setlTextArea(getFileDetails(file));
            System.out.println("2. What we save is: getlTextArea() =" + getlTextArea() );
              final JSplitPane splitPane = new JSplitPane();
              panel.add(splitPane, BorderLayout.CENTER);
              final JPanel panel_1 = new JPanel();
              splitPane.setLeftComponent(panel_1);
              panel_1.add(new JScrollPane(fileTree));
              final JPanel panel_2 = new JPanel();
              splitPane.setRightComponent(panel_2);
              panel_2.add(new JScrollPane(fileDetailsTextArea));
        setVisible(true);
      private String getFileDetails(File file) {
        if (file == null)
          return "";
        StringBuffer buffer = new StringBuffer();
        if (file.listFiles()!=null){
             for (int i=0; i< file.listFiles().length; i++){
             buffer.append(((file.listFiles())) + "\n");
         System.out.println("List all files");
    return buffer.toString();
    public static void main(String args[]) {
    new ListPanel("c:\\");
    class FileSystemModel implements TreeModel {
    private File root;
    private Vector listeners = new Vector();
    public FileSystemModel(File rootDirectory) {
    root = rootDirectory;
    public Object getRoot() {
    return root;
    public Object getChild(Object parent, int index) {
    File directory = (File) parent;
    String[] children = directory.list();
    return new TreeFile(directory, children[index]);
    public int getChildCount(Object parent) {
    File file = (File) parent;
    if (file.isDirectory()) {
    String[] fileList = file.list();
    if (fileList != null)
    return file.list().length;
    return 0;
    public boolean isLeaf(Object node) {
    File file = (File) node;
    return file.isFile();
    public int getIndexOfChild(Object parent, Object child) {
    File directory = (File) parent;
    File file = (File) child;
    String[] children = directory.list();
    for (int i = 0; i < children.length; i++) {
    if (file.getName().equals(children[i])) {
    return i;
    return -1;
    public void valueForPathChanged(TreePath path, Object value) {
    File oldFile = (File) path.getLastPathComponent();
    String fileParentPath = oldFile.getParent();
    String newFileName = (String) value;
    File targetFile = new File(fileParentPath, newFileName);
    oldFile.renameTo(targetFile);
    File parent = new File(fileParentPath);
    int[] changedChildrenIndices = { getIndexOfChild(parent, targetFile) };
    Object[] changedChildren = { targetFile };
    fireTreeNodesChanged(path.getParentPath(), changedChildrenIndices, changedChildren);
    private void fireTreeNodesChanged(TreePath parentPath, int[] indices, Object[] children) {
    TreeModelEvent event = new TreeModelEvent(this, parentPath, indices, children);
    Iterator iterator = listeners.iterator();
    TreeModelListener listener = null;
    while (iterator.hasNext()) {
    listener = (TreeModelListener) iterator.next();
    listener.treeNodesChanged(event);
    public void addTreeModelListener(TreeModelListener listener) {
    listeners.add(listener);
    public void removeTreeModelListener(TreeModelListener listener) {
    listeners.remove(listener);
    private class TreeFile extends File {
    public TreeFile(File parent, String child) {
    super(parent, child);
    public String toString() {
    return getName();
    [3] Program 3:
    package swing.com.test.test;
    import java.awt.BorderLayout;
    import java.io.File;
    import javax.swing.JPanel;
    import javax.swing.JTextArea;
    import javax.swing.JTree;
    import javax.swing.event.TreeModelEvent;
    import javax.swing.event.TreeModelListener;
    import javax.swing.event.TreeSelectionEvent;
    import javax.swing.event.TreeSelectionListener;
    import javax.swing.tree.TreeModel;
    import javax.swing.tree.TreePath;
    import java.io.Serializable;
    public class ListRightPanel extends JPanel implements TreeSelectionListener, Serializable{
         protected JTextArea textArea;
    //     protected ListAllFile  laf;
        private String str = "";
              public  String getlTextArea()  {
                        //textArea.getText();
                           return str;
              public  String setlTextArea(String ta)  {
                        str = ta;
                           return str;
          * Create the panel
         public ListRightPanel(ListPanel  laff) {
              super();
              setLayout(new BorderLayout());
              final JPanel panel = new JPanel();
              panel.setLayout(new BorderLayout());
              add(panel, BorderLayout.CENTER);
              textArea = new JTextArea();
            final String st = laff.getlTextArea();
            System.out.println("####################################");
            System.out.println("st=" + st);
             laff.fileTree.addTreeSelectionListener(new TreeSelectionListener() {
                 public void valueChanged(TreeSelectionEvent event) {
                   //laff.textArea.setText(getFileDetails(file));
                      textArea.setText(getlTextArea());
                     System.out.println("ListRightPanel Was Invoked from ListPanel!!getlTextArea() =" + getlTextArea() );
                     System.out.println("st=" + st);
              panel.add(textArea, BorderLayout.CENTER);
           public void valueChanged(TreeSelectionEvent e){};
    }You can try this one, thanks again
    sunny

  • How we can see the abap memory data

    How we can see the abap-memory data
    fine the code below
    import lsind
             report_title
             table_name
             report_field
             change_display
             show_hide
             conversion_exits
             table_description
             form_program
             select_form
             update_form
             line_size
             line_count
             records[]
             fields[]
             header_fields[]
             select_fields[]
             xrep[]
             from memory id 'LZUT5U11'.
    Regards
    santhosh
    mail-id : [email protected]

    Dear Santosh,
    ABAP MEMORY:
    A logical memory model illustrates how the main memory is distributed from the view of executable programs. A distinction is made here between external sessions and internal sessions .
    An external session is usually linked to an R/3 window. You can create an external session by choosing System/Create session, or by entering /o in the command field. An external session is broken down further into internal sessions. Program data is only visible within an internal session. Each external session can include up to 20 internal sessions (stacks).
    Every program you start runs in an internal session.
    All "squares" with rounded "corners" displayed in the status diagram represent a set of data objects in the main memory.
    The data in the main memory is only visible to the program concerned.
    CALL TRANSACTION and SUBMIT AND RETURN open a new internal session that forms a new program context. The internal sessions in an external session form a memory stack. The new session is added to the top of the stack.
    When a program has finished running, the top internal session in the stack is removed, and the calling program resumes processing.
    The same occurs when the system processes a LEAVE PROGRAM statement.
    LEAVE TO TRANSACTION removes all internal sessions from the stack and opens a new one containing the program context of the calling program.
    The ABAP memory is initialized after the program is called. In other words, you cannot transfer any data to a program called with LEAVE TO TRANSACTION via the ABAP memory.
    SUBMIT replaces the internal session of the program performing the call with the internal session of the program that has been called. The new internal session contains the program context of the called program with which it is performed.
    When a function module is called, the following steps are executed:
    A check is made to establish whether your program has called a function module of the same function group previously.
    If this is not the case, the system loads the associated function group to the internal session of the calling program as an additional program group. This initializes its global data.
    If your program used a function module of the same function group before the current call, the function module that you have called up at present can access the global data of the function group. The function group is not reloaded.
    Within the internal session, all of the function modules that you call from the same group access the global data of that group.
    If, in a new internal session, you call a function module from the same function group as in internal session 1, a new set of global data is initialized for the second internal session. This means that the data accessed by function modules called in session 2 may be different from that accessed by the function modules in session 1.
    You can call function modules asynchronously as well as synchronously. To do so, you must extend the function module call using the addition STARTING NEW TASK ''. Here, '' is a symbolic name in the calling program that identifies the external session, in which the called program is executed.
    Function modules that you call using the addition STARTING NEW TASK '' are executed independently of the calling program. The calling program is not interrupted.
    To make function modules available for local asynchronous calls, you must identify them as executable remotely (processing type: Remote-enabled module).
    There are various ways of transferring data between programs that are running in different program contexts (internal sessions). You can use:
    (1) The interface of the called program (standard selection screen, or interface of a
    subroutine, function module, or dialog module)
    (2) ABAP memory
    (3) SAP memory
    (4) Database tables
    (5) Local files on your presentation server.
    For further information about transferring data between an ABAP program and your presentation server, refer to the documentation for the function modules WS_UPLOAD and WS_DOWNLOAD.
    Function modules have an interface, which you can use to pass data between the calling program and the function module itself (there is also a comparable mechanism for ABAP subroutines). If a function module supports RFC, certain restrictions apply to its interface.
    If you are calling an ABAP program that has a standard selection screen, you can pass values to the input fields. There are two options here:
    By using a variant of the standard selection screen in the program call
    By passing actual values for the input fields in the program call
    If you want to call a report program without displaying its selection screen (default setting), but still want to pass values to its input fields, there is a variety of techniques that you can use.
    The WITH addition allows you to assign values to the parameters and select-options fields on the standard selection screen.
    If the selection screen is to be displayed when the program is called, use the addition: VIA SELECTION-SCREEN.
    Use the pattern button in the ABAP Editor to insert a program call via SUBMIT. The structure shows you the names of data objects that you can complete with the standard selection screen.
    For further information on working with variants and further syntax variants for the WITH addition, see the key word documentation in the ABAP Editor for SUBMIT.
    You can use SAP memory and ABAP memory to pass data between different programs.
    The SAP memory is a user-specific memory area for storing field values. It is available in all of the open sessions in a user's terminal session, and is reset when the terminal session ends. You can use its contents as default values for screen fields. All external sessions can access SAP memory. This means that it is only of limited use for passing data between internal sessions.
    The ABAP memory is also user-specific, and is local to each external session. You can use it to pass any ABAP variables (fields, structures, internal tables, complex objects) between the internal sessions of a single external session.
    Each external session has its own ABAP memory. When you end an external session (/i in the command field), the corresponding ABAP memory is released automatically.
    To copy a set of ABAP variables and their current values (data cluster) to the ABAP memory, use the EXPORT TO MEMORY ID statement. The (up to 32 characters) is used to identify the different data clusters.
    If you repeat an EXPORT TO MEMORY ID statement to an existing data cluster, the new data overwrites the old.
    To copy data from ABAP memory to the corresponding fields of an ABAP program, use the IMPORT FROM MEMORY ID statement.
    The fields, structures, internal tables, and complex objects in a data cluster in ABAP memory must be declared identically in both the program from which you exported the data and the program into which you import it.
    To release a data cluster, use the FREE MEMORY ID statement.
    You can import just parts of a data cluster with IMPORT, since the objects are named in the cluster.
    In the SAP memory, you can define memory areas (SET/GET parameters, or parameter IDs), which you can then address by a name of up to 20 characters.
    You can fill these memory areas either using the contents of input/output fields on screens, or using the ABAP statement:
    SET PARAMETER ID '' FIELD .
    The memory area with the name now has the value .
    You can use the contents of a memory area to display a default value in an input field on a screen.
    You can also read the memory areas from the SAP memory using the ABAP statement GET PARAMETER ID FIELD . The field then contains the value from parameter .
    The link between an input/output field and a memory area in SAP memory is inherited from the data element on which the field is based. You can enable the set parameter or get parameter attributes in the input/output field attributes.
    Once you have set the Set parameter attribute for an input/output field, you can fill it with default values from SAP memory. This is particularly useful for transactions that you call from another program without displaying the initial screen. For this purpose, you must activate the Set parameter functionality for the input fields of the first screen of the transaction.
    You can:
    (1) Copy the data that is to be used for the first screen of the transaction to be called to the parameter ID in the SAP memory. To do so, use the statement SET PARAMETER immediately before calling the transaction.
    (2) Start the transaction using CALL TRANSACTION or LEAVE TO
    TRANSACTION . If you do not want to display the initial screen, use the AND
    SKIP FIRST SCREEN addition.
    (3) The system program that starts the transaction fills the input fields that do not already have default values and for which the Get parameter attribute has been set with values from SAP memory.
    The Technical information for the input fields in the transaction you want to call contains the names of the parameter IDs that you need to use.
    Parameter IDs should be entered in table TPARA. This happens automatically if you create them via the Object navigator.
    Programs that you call using the statements SUBMIT , LEAVE TO TRANSACTION , SUBMIT AND RETURN, or CALL TRANSACTION run in their own SAP LUW, and update requests receive their own update key.
    When you use SUBMIT and LEAVE TO TRANSACTION , the SAP LUW of the calling program ends. If no COMMIT WORK statement occurred before the program call, the update requests in the log table remain incomplete and cannot be processed. They can no longer be executed. The same applies to inline changes that you make using PERFORM &#8230; ON COMMIT.
    Data that you have written to the database using inline changes is committed the next time a new screen is displayed.
    If you use SUBMIT AND RETURN or CALL TRANSACTION to insert a program and then return to the calling program, the SAP LUW of the calling program is resumed when the called program ends. The LUW processing of calling and called programs is independent.
    In other words, inline changes are committed the next time a new screen is displayed. Update requests and calls using PERFORM ... ON COMMIT require an independent COMMIT WORK statement in the SAP LUW in which they are running.
    Function modules run in the same SAP LUW as the program that calls them.
    If you call transactions with nested calls, each transaction needs its own COMMIT WORK, since each transaction maps its own SAP LUW.
    The same applies to calling executable programs, which are called using SUBMIT AND RETURN.
    The statement CALL TRANSACTION allows you to
    Shorten the user dialog when calling using CALL TRANSACTION USING .
    Determine the type of update (asynchronous, local, or synchronous) for the transaction called. For this purpose, use the addition CALL TRANSACTION USING UPDATE 'update_mode', where update_mode can have the values a (asynchronous), L (local), or S (synchronous).
    Combining the two options enables you to call several transactions in sequence (logical chain), to reduce their screen sequence, and to postpone processing of the SAP LUW 2 until processing of the SAP LUW 1 has been completed.
    When you call a function module asynchronously using the CALL FUNCTION STARTING NEW TASK ' ' statement, it runs in its own SAP LUW.
    Programs that are executed with a SUBMIT AND RETURN or CALL
    TRANSACTION statement starts their own LUW processing. You can use these to perform nested (complex) LUW processing.
    You can use function modules as modularization units within an SAP LUW.
    Function modules that are called asynchronously are suitable for programs that allow parallel processing of some of their components.
    All techniques are suitable for including programs with purely display functions.
    Note that a function module called with CALL FUNCTION STARTING NEW TASK is executed as a new logon. It, therefore, sees a separate SAP memory area. You can use the interface of the function module for data transfers.
    Example: In your program, you want to call a display transaction that is displayed in a separate window (amodal). To do so, you encapsulate the transaction call in a function module, which you set as to Remote-enabled module. You use the function module interface to accept values that you write to the SAP memory. You then call up the transaction in the function module using CALL TRANSACTION AND SKIP FIRST SCREEN. You call the function module itself asynchronously.
    Type &#8216;E' locks for nested program calls may be requested more than once from the same object. This behavior can be described as follows:
    Lock entries from function modules called synchronously increment the cumulative counter, And are therefore successful.
    Lock entries from programs called with CALL TRANSACTION or SUBMIT
    AND
    RETURN is refused. The object to be locked by the called program is displayed as already Locked by another user.
    Programs that you call using SUBMIT or LEAVE TO TRANSACTION cannot come into conflict with lock entries from the calling program, since the old program ends when the call is made. When a program ends, the system deletes all of the lock entries that it had set.
    Lock requests belonging to the same user from different R/3 windows or logons are treated as lock requests from other users.
    Regards,
    Rajesh.
    Please reward points if found helpful.

  • FI-SL How to define  formula components ID(report painter)

    Hi Experts
    please teach me how to define formula components ID.(it is related to report painter)
    I cannot see by GS13(variable)
    Regards.

    I sloved by myself. it automatically made when I add the row or culumn.
    but after delete the  row or culumn. it may have a problem.... I do not know.
    thanks.

  • How do i see the current version of compiler installed in the unix machine

    how do i see the current version of compiler installed in the unix machine

    Hi
    For the compiler
    $ CC -V
    CC: Sun C++ 5.7 Patch 117830-02 2005/03/30
    or
    $ cc -C
    cc: Sun C 5.7 Patch 117836-03 2005/05/11
    For full details,
    $ version
    Machine hardware: sun4u
    OS version: 5.8
    Processor type: sparc
    Hardware: SUNW,Sun-Blade-1500
    The following components are installed on your system:
    Sun Studio 10
    Sun Studio 10 C Compiler
    Sun Studio 10 C++ Compiler
    Sun Studio 10 Tools.h++ 7.1
    Sun Studio 10 C++ Standard 64-bit Class Library
    Sun Studio 10 Garbage Collector
    Sun Studio 10 Fortran 95
    Sun Studio 10 Debugging Tools (including dbx)
    Sun Studio 10 Debugger GUI
    Sun Studio 10 Performance Analyzer (including collect, ...)
    Sun Studio 10 X-Designer
    Sun Studio 10 VIM editor
    Sun Studio 10 XEmacs editor
    Sun Studio 10 Native Connector Tool
    Sun Studio 10 LockLint
    Sun Studio 10 Building Software (including dmake)
    Sun Studio 10 Documentation Set
    version of "/nobackup/pfloyd/opt/SUNWspro/bin/../prod/bin/../../bin/cc": Sun C 5.7 Patch 117836-03 2005/05/11
    version of "/nobackup/pfloyd/opt/SUNWspro/bin/../prod/bin/../../bin/CC": Sun C++ 5.7 Patch 117830-02 2005/03/30
    version of "/nobackup/pfloyd/opt/SUNWspro/bin/../prod/bin/../../bin/f90": Sun Fortran 95 8.1 Patch 117834-02 2005/03/30
    version of "/nobackup/pfloyd/opt/SUNWspro/bin/../prod/bin/../../bin/dbx": Sun Dbx Debugger 7.4 117844-01 2005/03/05
    version of "/nobackup/pfloyd/opt/SUNWspro/bin/../prod/bin/../../bin/analyzer": Sun Performance Analyzer 7.4 2005/01/07
    version of "/nobackup/pfloyd/opt/SUNWspro/bin/../prod/bin/../../bin/dmake": Sun Distributed Make 7.6 117838-01 2005/03/04
    Paul

  • Not able to see components on Xcelsius canvas

    Hello friends,
    Sometimes when I am in design mode of Xcelsius 2008, I am not able to see any component on my canvas but they are all in my component panel as well as I can see all functioning properly when I do the preview or export it to SWF. Since I am not able to see components on canvas, I canu2019t make any changes to my existing dashboard and its a show stopper for me. Is it known issue? any service pack or fix pack available for this error? Is this cause of size of XLF file or due to any limitation on number of components on canvas?
    How is my dashboard:
    My dashboard has a tab control with 6 tabs.
    Each tab has 1 accordian, 3 pie charts, 3 list views, 1 line chart, Many checkboxes, and a pair of radio buttons. Format of each tab is exactly same.
    Size of my XLF file now is 1.5 MB
    What I tried:
    I checked that global invisible button is not checked.
    I tried closing xcelsius and opening it again with same XLF file.
    I tried deleting registries folder from machine and restarting machine.
    I tried unistalling Xcelsius and install again.
    I tried the same with SP1.
    but no success till now. Any pointers will be appreciated.
    Thanks.

    Hi,
    I would suggest you posting this in the Xcelsius forum.
    Ingo

  • How Can I see the CO-PA report

    hi sap experts,
    how can i see the CO-PA report and in detail configuriation,
    and controlling reports.
    Advance Thanks,

    For executing COPA - Tcode is KE30 (for define change etc... KE31 to KE34)
    Standard reports available in controlling sub-components under information system
    Regards
    Radha

  • How can we see status of all Requests at a time using any tables?

    How can we see status of all Requests at a time in the Info cube or ODS using any tables? what I am facing was while I run a Process Chain in some data targets red requests remains and due to this all other requests doesnot available for reporting.
    Now is there any T-Code or Table to view all requests in a single shot.
    Thanks in advance,
    Raj

    Hi Go for RSMONICDP give timestamp and u'll have it.
    Please assign points if useful
    Edited by: Aadil on Jan 21, 2008 7:43 AM

  • Interactive forms- i see only one record -how can i see more?

    Hi experts,
    i have a table and the result is only one record instead of more records.
    how can i see more records?
    my code is:
    types: begin of structure_0021,
    favor type pa0021-favor,
    yy_id type pa0021-yy_id,
    fgbdt type pa0021-fgbdt,
    end of structure_0021.
    data: it_0021 type table of struct_0021,
             wa_0021 like line of it_0021.
    select favor yy_id fgbdt from pa0021 into corresponding fields of table it_0021
    where pernr = lv_pernr and
    subty = '2'.
    data: lo_nd_adobe2 type ref to if_wd_context_node,
            lo_nd_ls00212 type ref to if_wd_context_node,
            lo_el_ls00212 type ref to if_wd_context_element,
           ls_ls00212 type wd_this->element_ls0021.
    lo_nd_adobe2 = wd_context->get_child_node( name = wd_this->wdctx_adobe).
    lo_el_ls00212 = lo_nd_adobe2->get_element().
    lo_nd_ls00212 = lo_nd_adobe->get_child_node(name = wd_this->wdctx_ls0021).
    lo_el_ls00212 = lo_nd_ls00212->get_element().
    loop at it_0021 into wa_0021.
    lo_el_ls00212->get_static_attributes(importing static_attributes = ls_ls00212).
    endloop.
    lo_nd_ls00212->bind_table(new_items = it_0021).
    if anyone can help me - i will really appreciate it.
    i tried other thing and didnt succeed.
    thanks,
    Michal.

    Obvious question, but have you got 'Find My iPhone' set on both devices?  Settings>iCloud>Find My iPhone.

  • How can I see my kids' texts? (Family Sharing)

    I gave my kids an iCloud address under Family Sharing, under my account. How can I see their texts, or have them forwarded to me?
    A great feature would be a summary email 1 or 2 times per day with the contents of their texts.
    (For more clarity, I just got the iPhone 6 and they have my old 4s, with no cell service but with WiFi at home using the new iCloud address)
    thanks!
    DJC

    You cannot see their texts if they have separate iCloud accounts.
    Sorry,
    GB

  • How can I see track length in a playlist in music on iPad.

    How can I see the track lengths in a playlist in music app on iPad the new version ios7, it was fine before. I use it for my work and need to see at a glance the length of all the tracks in a playlist so I can decide what track to play. Thanks

    You can only add folders to the email account if it is an IMAP account. If you see an EDIT button at the top of the window when you are in the email account - where you can see your inbox, sent and trash folders - if there is an edit button at the top of that window - you can tap that and then an Add Mailbox option appears at the bottom of the window.
    If you do not see that edit button, you do not have an IMAP account and you cannot add folders.

  • How can I see a calendar item that was in my backup

    I did a full backup at home of my 8330 with BB Desktop Software a week ago.
    But I accidentally left my phone in the office and can't retrieve it until Monday.
    The data I need is in one calendar entry in the backup. How can I see it? I don't own Outlook or Office.
    I can't figure out where to start.
    Solved!
    Go to Solution.

    Not easily, as the backups are intended to restore to the BlackBerry device, not be viewed and/or edited on the PC.
    Try to find ABC Amber IPD Converter software for your PC. It can read your backup IPD files and save to Excel or another PC file format.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?

    I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
    Thanks!
    David

    Either of these should help.
    http://grandperspectiv.sourceforge.net/
    http://www.whatsizemac.com/
    Or search 'disk size' in the App Store.
    Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk.

  • How do I see all options in the Inspector?

    How do I see all options in the Inspector? I have gone to Preferences and checked Show Advanced Options. I am also selecting a clip in the Project window. But when I pull up my Inspector, I only have options to change the background color or the Duration. I have no options for speed, etc. Please help!

    Hi wemacAU,
    I use a lot of popups. Somewhere in my sheets I have a column that contains the data that each popup is based on. This is nessasary for me because those popups need to be updated from time to time. So I would copy and print/paste that column. Another way would be to just take a screenshot:
    If you want something that will update when the popup is changed Numbers doesn't even do that within the app.
    quinn

  • How to change & see the PO Status (Purchase Order Status) ?

    Hi Everybody,
    I have to change the PO Status. For this I am using the Function Module 'BBP_PD_PO_STATUS_CHANGE'. But it is not changing the PO Status. How/Where to see the PO Status?
    Please help me out asap.
    Thanks & Regrds,
    Nagaraju Maddi
    Message was edited by: Nagaraju Maddi

    Hi ,
    It is possible to Update the Pricing procedure in Old PO. For this what you need  to do is Open PO in ME22N transaction, in the header Org. Data tab remove the Purch. Org and Company Code and press Enter Key for 3 or 4 times now enter the Purch. Org and Company Code now check in the Item Data, condition tab Analysis button new Pricing procedure is picked up. Even we can change the PO Currency in this way if it is changed in Vendor master.
    Hope this will help you
    Best Regards,
    Pradeep Naik

Maybe you are looking for

  • Write File stops at 152 Mb

    When using the "Write file" option in LabView 7.1 the maximum file size of the binary file is 152 Mb. When this size is reached the program always hangs and claims that "Data was overwritten before it could be read by the system." (I do use DMA) A so

  • Release Code In Release Strategy

    Dear Experts, We have configured the release strategy for PR on Devlopment Client. 1. I have created necessary Characteristics and Classes  on devlopmnt client and configured the startegy and it has been applied succesfully on Dev client. Now i want

  • Java Class Loading.

    I know that the primordial, default java class loader may be re-written and replaced for the java runtime environment, so that it uses the new one. However, I have also heard the replacement is not entire; the replacement loader is always saught out

  • Satellite L300D-13S - How can i restore with corrupt disk 2

    The laptop is a Satellite L300D-13s. I tried to restore the laptop using the restore disks, the first disk worked fine but it did not recognize the second disk. No matter what I did I could not get it to read this disk. I then tried to us the F8 opti

  • Apple TV dead, isthis general or local?

    Today, enetring into the various choices, Apple TV was "unable to connect" with either HBO Go or Netflix. Tried to turn off and on, no change, disconnected electrical cable and restarted it is still not working. I see that several people are having p