How do i select a particular cell from a AbstractTableModel?

I m using abstractTableModel to create my table. My table display 4 columns of different info, now i can capture my info from the other window and compare the value with my table but i don't know how to highlight/or select the particular rows in table.

Hi,
as I said before, the changeSelection(...) method of JTable will setup it's ListSelectionModel so that the row, you want, gets selected/highlighted:
yourTable.changeSelection(row,0,false,false);
will select a certain cell - but if selection of a single cell is not allowed and row selection is allowed, the whole row will be selected this way. You can allow selection of a single cell, selection of a column, selection of a row, or simultaneous selection of column and row at the same time. You can have single selection and multi selection.
Hope this helps
greetings Marsian

Similar Messages

How can i extract the particular data from Base tables

Hi
I have some Base R/3- Tables . I need to exact the data from these base tables.
But i need to select some type of datarecords(eg: select Material Documents from MSEG and MKPF tables based on movement types 261,262).
Something like that . So how can i select the particular category datarecords from base tables. Anyway im going to create the Custom DataSource.
So please let me know . how can i extarct tha particular data from base tables
kumar

Hi Venkat
See i have some 5-tables . I need to extarct from these tables.
first i need to extract the data from one table fully.
Then i need to extarct the data from second table based on profict centers, company codes of first table.
Then i need to extract the data from third table based on profict centers of first table and movement type = 2p,2n,2s condition.
So how can i extarct like this data from multiple tables.
Please let me know
kumar

Selecting the particular cell in the datatable

hi all,
sorry for such a stupid question.
i have a datatable component. i can get the rowid of the particular row.
but how can i identify the particular cell in that row so that i can update its
value?
is it possible to update the cell's value in javascript after identifying it?
thanks in advance.
enjoyyy,
java_buff

Thanks Edward for ur reply...
But in Inventory In warehouse report they gave the total as in different color.How they done that?????
Regards,
Anitha

How can I select to send an from another email account within the inserted gmail account?

How can I select to send an from another email account within the inserted gmail account?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The MAS should use any credits first and then apply the remainder to a listed bank card.

How do I select one particular paragraph within a document to print only that selected paragraph?

How do I select and print one particular paragraph from the other paragraphs in a document?

Which App?
In Word, click Selection:

How to see data for particular date from a alert log file

Hi Experts,
I would like to know how can i see data for a particular date from alert_db.log in unix environment. I'm suing 0racle 9i in unix
Right now i'm using tail -500 alert_db.log>alert.txt then view the whole thing. But is there any easier way to see for a partiicular date or time
Thanks
Shaan

Hi Jaffar,
Here i have to pass exactly date and time, is there any way to see records for let say Nov 23 2007. because when i used this
tail -500 alert_sid.log | grep " Nov 23 2007" > alert_date.txt
It's not working. Here is the sample log file
Mon Nov 26 21:42:43 2007
Thread 1 advanced to log sequence 138
Current log# 3 seq# 138 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo3.log
Mon Nov 26 21:42:43 2007
ARCH: Evaluating archive log 1 thread 1 sequence 137
Mon Nov 26 21:42:43 2007
ARC1: Evaluating archive log 1 thread 1 sequence 137
ARC1: Unable to archive log 1 thread 1 sequence 137
Log actively being archived by another process
Mon Nov 26 21:42:43 2007
ARCH: Beginning to archive log 1 thread 1 sequence 137
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_137
.dbf'
ARCH: Completed archiving log 1 thread 1 sequence 137
Mon Nov 26 21:42:44 2007
Thread 1 advanced to log sequence 139
Current log# 2 seq# 139 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo2.log
Mon Nov 26 21:42:44 2007
ARC0: Evaluating archive log 3 thread 1 sequence 138
ARC0: Beginning to archive log 3 thread 1 sequence 138
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_138
.dbf'
Mon Nov 26 21:42:44 2007
ARCH: Evaluating archive log 3 thread 1 sequence 138
ARCH: Unable to archive log 3 thread 1 sequence 138
Log actively being archived by another process
Mon Nov 26 21:42:45 2007
ARC0: Completed archiving log 3 thread 1 sequence 138
Mon Nov 26 21:45:12 2007
Starting control autobackup
Mon Nov 26 21:45:56 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0033'
handle 'c-2861328927-20071126-01'
Clearing standby activation ID 2873610446 (0xab47d0ce)
The primary database controlfile was created using the
'MAXLOGFILES 5' clause.
The resulting standby controlfile will not have enough
available logfile entries to support an adequate number
of standby redo logfiles. Consider re-creating the
primary controlfile using 'MAXLOGFILES 8' (or larger).
Use the following SQL commands on the standby database to create
standby redo logfiles that match the primary database:
ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 10485760;
Tue Nov 27 21:23:50 2007
Starting control autobackup
Tue Nov 27 21:30:49 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0280'
handle 'c-2861328927-20071127-00'
Tue Nov 27 21:30:57 2007
ARC1: Evaluating archive log 2 thread 1 sequence 139
ARC1: Beginning to archive log 2 thread 1 sequence 139
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_139
.dbf'
Tue Nov 27 21:30:57 2007
Thread 1 advanced to log sequence 140
Current log# 1 seq# 140 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo1.log
Tue Nov 27 21:30:57 2007
ARCH: Evaluating archive log 2 thread 1 sequence 139
ARCH: Unable to archive log 2 thread 1 sequence 139
Log actively being archived by another process
Tue Nov 27 21:30:58 2007
ARC1: Completed archiving log 2 thread 1 sequence 139
Tue Nov 27 21:30:58 2007
Thread 1 advanced to log sequence 141
Current log# 3 seq# 141 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo3.log
Tue Nov 27 21:30:58 2007
ARCH: Evaluating archive log 1 thread 1 sequence 140
ARCH: Beginning to archive log 1 thread 1 sequence 140
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_140
.dbf'
Tue Nov 27 21:30:58 2007
ARC1: Evaluating archive log 1 thread 1 sequence 140
ARC1: Unable to archive log 1 thread 1 sequence 140
Log actively being archived by another process
Tue Nov 27 21:30:58 2007
ARCH: Completed archiving log 1 thread 1 sequence 140
Tue Nov 27 21:33:16 2007
Starting control autobackup
Tue Nov 27 21:34:29 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0205'
handle 'c-2861328927-20071127-01'
Clearing standby activation ID 2873610446 (0xab47d0ce)
The primary database controlfile was created using the
'MAXLOGFILES 5' clause.
The resulting standby controlfile will not have enough
available logfile entries to support an adequate number
of standby redo logfiles. Consider re-creating the
primary controlfile using 'MAXLOGFILES 8' (or larger).
Use the following SQL commands on the standby database to create
standby redo logfiles that match the primary database:
ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 10485760;
Wed Nov 28 21:43:31 2007
Starting control autobackup
Wed Nov 28 21:43:59 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0202'
handle 'c-2861328927-20071128-00'
Wed Nov 28 21:44:08 2007
Thread 1 advanced to log sequence 142
Current log# 2 seq# 142 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo2.log
Wed Nov 28 21:44:08 2007
ARCH: Evaluating archive log 3 thread 1 sequence 141
ARCH: Beginning to archive log 3 thread 1 sequence 141
Wed Nov 28 21:44:08 2007
ARC1: Evaluating archive log 3 thread 1 sequence 141
ARC1: Unable to archive log 3 thread 1 sequence 141
Log actively being archived by another process
Wed Nov 28 21:44:08 2007
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_141
.dbf'
Wed Nov 28 21:44:08 2007
ARC0: Evaluating archive log 3 thread 1 sequence 141
ARC0: Unable to archive log 3 thread 1 sequence 141
Log actively being archived by another process
Wed Nov 28 21:44:08 2007
ARCH: Completed archiving log 3 thread 1 sequence 141
Wed Nov 28 21:44:09 2007
Thread 1 advanced to log sequence 143
Current log# 1 seq# 143 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo1.log
Wed Nov 28 21:44:09 2007
ARCH: Evaluating archive log 2 thread 1 sequence 142
ARCH: Beginning to archive log 2 thread 1 sequence 142
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_142
.dbf'
Wed Nov 28 21:44:09 2007
ARC0: Evaluating archive log 2 thread 1 sequence 142
ARC0: Unable to archive log 2 thread 1 sequence 142
Log actively being archived by another process
Wed Nov 28 21:44:09 2007
ARCH: Completed archiving log 2 thread 1 sequence 142
Wed Nov 28 21:44:36 2007
Starting control autobackup
Wed Nov 28 21:45:00 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0202'
handle 'c-2861328927-20071128-01'
Clearing standby activation ID 2873610446 (0xab47d0ce)
The primary database controlfile was created using the
'MAXLOGFILES 5' clause.
The resulting standby controlfile will not have enough
available logfile entries to support an adequate number
of standby redo logfiles. Consider re-creating the
primary controlfile using 'MAXLOGFILES 8' (or larger).
Use the following SQL commands on the standby database to create
standby redo logfiles that match the primary database:
ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 10485760;
ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 10485760;
Thu Nov 29 21:36:44 2007
Starting control autobackup
Thu Nov 29 21:42:53 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0206'
handle 'c-2861328927-20071129-00'
Thu Nov 29 21:43:01 2007
Thread 1 advanced to log sequence 144
Current log# 3 seq# 144 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo3.log
Thu Nov 29 21:43:01 2007
ARCH: Evaluating archive log 1 thread 1 sequence 143
ARCH: Beginning to archive log 1 thread 1 sequence 143
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_143
.dbf'
Thu Nov 29 21:43:01 2007
ARC1: Evaluating archive log 1 thread 1 sequence 143
ARC1: Unable to archive log 1 thread 1 sequence 143
Log actively being archived by another process
Thu Nov 29 21:43:02 2007
ARCH: Completed archiving log 1 thread 1 sequence 143
Thu Nov 29 21:43:03 2007
Thread 1 advanced to log sequence 145
Current log# 2 seq# 145 mem# 0: /oracle/NEWDB/oradata/NEWDB/redo2.log
Thu Nov 29 21:43:03 2007
ARCH: Evaluating archive log 3 thread 1 sequence 144
ARCH: Beginning to archive log 3 thread 1 sequence 144
Creating archive destination LOG_ARCHIVE_DEST_1: '/oracle/NEWDB/admin/arch/1_144
.dbf'
Thu Nov 29 21:43:03 2007
ARC0: Evaluating archive log 3 thread 1 sequence 144
ARC0: Unable to archive log 3 thread 1 sequence 144
Log actively being archived by another process
Thu Nov 29 21:43:03 2007
ARCH: Completed archiving log 3 thread 1 sequence 144
Thu Nov 29 21:49:00 2007
Starting control autobackup
Thu Nov 29 21:50:14 2007
Control autobackup written to SBT_TAPE device
comment 'API Version 2.0,MMS Version 5.0.0.0',
media 'WP0280'
handle 'c-2861328927-20071129-01'
Thanks
Shaan

How do I selectively erase old data from old computers on my Time Capsule to make room for my new computer data?

My new computer did one complete backup on the Time Capsule now I get the message that there is insufficient room to complete further backups.
(128 GB available, my backup size is 170GB but the time capsule is 998GB)
I suspect that information from old computers is there. How do I selectively remove that information or do I have to erase the whole Time Capsule and start over with my new computer and backup again?

Check the info here.. but big warning .. it often fails.. if you want to keep your old backups archive them off the TC to USB drive.. then erase and start fresh clean backup.
http://pondini.org/TM/Time_Capsule.html

How i can Select characteristics range like From To in COPA Report

HI,
I am creating copa report, I want to know how i can select characteristics with range like From / To.
e g i want to give period range from 001 To 002 Etc.
how it is possible while creating COPA report with report painter. (KE31)
Thanks
Nilesh

Hi,
see SAPNET note 516557.
Best regards, Christian

How to give color of particular cell in alv list display for dynamic table

Dear Experts,
i want to give color of a particular cell in alv list display (reuse_alv_list_display). Here i am passing data through dynamic table?

Hi,
Se this:
DATA: lt_color    TYPE lvc_t_scol WITH HEADER LINE.
DATA: BEGIN OF data_tab OCCURS 0.
         tabcolor     TYPE   lvc_t_scol,
      END OF data_tab.
* Befone ALV call
alv_layout-coltab_fieldname = 'TABCOLOR'.
* For each row in data_tab
REFRESH: lt_color.
CLEAR: lt_color.
lt_color-color-col = 6.
lt_color-color-int = 1.
lt_color-fname = FIELD1'.
APPEND lt_color.
lt_color-color-col = 2.
lt_color-color-int = 0.
lt_color-fname = 'FIELD2'.
APPEND lt_color.
data_tab-tabcolor[] = lt_color[].
append data_tab.
Best regards,
Leandro Mengue

How to programatically select different JTable cells

Dear all,
I need to programatically select different JTable cells.
I have to make the inverse selection. So if the user has a table of one column and 10 rows, and selects rows 3,6,8, the inverse selection should select all the other remainig cells and deselect 3,6, and 8.
I tried using the following but it does not work ?
for (int i = 0; i < table.getRowCount(); i++) {
table.changeSelection(i, 0, true, false);
Hope someone can help.
Regards,
Kanita

Dear all,
I need to programatically select different JTable cells.
I have to make the inverse selection. So if the user has a table of one column and 10 rows, and selects rows 3,6,8, the inverse selection should select all the other remainig cells and deselect 3,6, and 8.
I tried using the following but it does not work ?
for (int i = 0; i < table.getRowCount(); i++) {
table.changeSelection(i, 0, true, false);
Hope someone can help.
Regards,
Kanita

How to make a report to display next 18 months of data with when user select a particular month from the filter in power pivot tabular model.

Hi,
i have a dimension table with month_key having values (201201,201202,201203.......202011,202012) and month name ( Jan 12, feb 12,......NOV 20, Dec 20) and a fact table with columns (month_key ,measure_types, Amount)
My requirement is to create a power pivot report in which when a user select a month from the filter, the report should display the (selected month+18 ) month's data against each type . when JAN 12 is selected ,the jan 2012 +18 = june 2013
, month name should be populated with months till june 2013 only .
i tried creating calculated column"END DATE " in the fact table with dax expression to calculate the 18th monh from the current month as below
month_key END DATE
201201       201306
201202       201307
and thought of filtering the table with month key <= ENDDATE but it is not working as expected. could you please guide me on this ? Is there any time intelligence function that serve the purpose . Iam using excel 2010
..hence could not do any calculation on the report side also. please suggest .
Thanks in advance

Do you need to show the measure calculated for those 18 months as a total on 1 row, or do you need to select a single month and then display on row filters 18 distinct rows?
The first is trivial as driezl has suggested.
The second will require a second calendar table.
I created this example workbook for a coworker who had a similar problem. You will have to use the disconnected table as your filter and pull your related table onto the rows.
Finally, the easiest way to deal with the sort of date arithmetic you need to do is to restructure your date table to have a series of "Sequential" fields. These fields should be the number of units of time since the beginning of your calendar.
For example, consider a calendar starting on January 1, 2010. For January - December 2010, [MonthSequential] = 1, 2, ..., 12. For January - December 2011, [MonthSequential] = 13, 14, ..., 24, and so on, incrementing by 1 for each sequential month in time.
Assuming you have this set up in your date tables (one related to your model - DimDate - and one disconnected - DisconDimDate) your measure would look like this:
18 Month Measure:=
CALCULATE( [Measure]
, FILTER( DimDate
, DimDate[MonthSequential] >= MAX( DisconDimDate[MonthSequential] )
&& DimDate[MonthSequential] <= MAX( DisconDimDate[MonthSequential] ) + 18
Please review this example along with the workbook I have linked above.

How to diasble selection for particular rows in a Table?

im currently working on a multiple select table.. i need to disable the checkbox for some particular rows. How can i get runtime control over that cell??

To disable one or more rows of single or multiple selection in your table, add the following code to your controller processRequest method:
OATableBean tableBean = ...;
tableBean.setSelectionDisabledBindingAttr("Disabled");
In the example above, "Disabled" represents the Boolean view attribute that returns 1/"Y" if one or more rows is (are) to be disabled, otherwise it returns 0/"N". The view attribute "Disabled" must belong to the same view object as the one associated with the table items.
If its an advanced table, use the same method on OAAdvancedTableBean instead.

How to get selected values (using checkBox) from DataGrid in flex.

i have a datagrid which is getting values from a XML file (getting this xml file from database using PHP and HTTP request in flex). i have created a checkbox in every row in data grid. and here is my requirement: i want to select tow or three check-box and would like to get all the values form that particular ROWs in some form , prefered arraycollection (such that i can pass this array directly to a bar chart) .. can some one help me as i am new to flex .
code ......
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical" creationComplete="siteData.send()">
          <mx:Script>
                    <![CDATA[
                              import mx.collections.XMLListCollection;
                              import mx.controls.*;
                              import mx.events.ListEvent;
                              import mx.rpc.events.ResultEvent;
                              import mx.controls.Alert;
                              [Bindable] private var fullXML:XMLList;
                              private function contentHandler(evt:ResultEvent):void{
                                        fullXML = evt.result.values;
                    ]]>
          </mx:Script>
          <mx:VBox>
                    <mx:Label text="This Data Grid is loading the full XML file"/>
                    <mx:DataGrid width="600" id="datagrid" dataProvider="{fullXML}">
                              <mx:columns>
                                        <mx:DataGridColumn headerText="Select">
                                                  <mx:itemRenderer>
                                                            <mx:Component>
                                                                      <mx:HBox horizontalAlign="center">
                                                                                <mx:CheckBox id="check"/>
                                                                      </mx:HBox>
                                                            </mx:Component>
                                                  </mx:itemRenderer>
                                        </mx:DataGridColumn>
                                        <mx:DataGridColumn dataField="release_version" headerText="Release"/>
                                        <mx:DataGridColumn dataField="build" headerText="build"/>
                                        <mx:DataGridColumn dataField="time_login" headerText="time_login"/>
                                        <mx:DataGridColumn dataField="time_tunnel" headerText="time_tunnel"/>
                                        <mx:DataGridColumn dataField="rate_login" headerText="time_tunnel"/>
                                        <mx:DataGridColumn dataField="rate_tunnel" headerText="rate_tunnel"/>
                              </mx:columns>
                    </mx:DataGrid>
          </mx:VBox>
          <mx:HTTPService url="http://localhost/php_genxml.php" id="siteData" result="contentHandler(event)" resultFormat="e4x"/>
</mx:Application>
as you can see in the image , i will get this datgrid . now i want to select two or three checkboxes and would like to get all the values form the perticular row (for which check box is selected). i would like to get in array from such that i can driectly pass them to bar chart....
can some one help me in this. as i m new to flex. or if you have some other suggestion ...My final requirement is: select some values and generate bar gharph for those values.
please help me in this.
thanks
tanuj

Hi Timo -
Thanks for the suggestion. I could get the values as below:
public void multiOpUnitValChange(ValueChangeEvent valueChangeEvent) {
// Add event code here...
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding opUnitIter = (DCIteratorBinding)bindings.get("OperatingUnit2VOIterator");
Integer[] values = (Integer[])valueChangeEvent.getNewValue();
for (int i=0; i<values.length; i++){
Row row = opUnitIter.getRowAtRangeIndex(i);
System.out.println(row.getAttribute("OpUnitId"));
Thanks -
Rohit

How can I select pages to print from a Word document using the report generation 'print report' vi?

I have researched the knowledge base and found:
Printing A Range of Pages or Number of Copies of a Report Using the Report Generation Toolkit in LabVIEW.
This seems to be from a previous version of LV. I am using LV2010. The instructions given do not match up with the current vi. The information did provide a tip and drilling down into the vi I was able to insert the from/to page numbers at the printout invoke method, however this prevents the print function from working in that it can no longer find the default printer.
The error message is:
Error 1015 occurred at NI_ReportGenerationToolkit.lvlib:Word_Print.vi -> NI_Word.lvclassrint Report.vi ->
error 1015 is: Printer is not responding. Check printer configuration.
Any ideas how I can make the modification to print, for example, pages 24 through 29 out of a 32 page word document?
Thanks,
Chris

Hello, take a look at this article. Unfortunately the Generate Report Get Data to Modify.vi was remove since RGT 1.1.3 release. That being said, we can try to find a workaround. See "Configuring a Printer Through the Windows Dialog in LabVIEW", open the GetPrinterSettings.vi, at the PrinterSettings property node you can select the from/to page. I hope this helps.
Alejandro | Academic Program Engineer | National Instruments

How do I transfer a particular app from a different iPad/account to mine

There's this app in my cousin's iPad that I wanted to transfer to mine... It was purchased from a different apple account which, from what we know, was disabled... We tried, logging the account, from which the app was purchased from, into my iPad but then we couldn't get it through because it said the account was disabled... It's still in that particular iPad, and working... But I'd like to know how to transfer or share it to mine... And how we could possibly update the app, despite the account being terminated....

All apps, and other downloaded content, are tied to the account that originally bought/downloaded it - so if that app was bought by your cousin then it will be tied to your cousin's account, you can't copy or transfer it to another account. If the app is still in the store then you should be able to buy your own copy of it.
For your cousin's account being disabled, he/she might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
He/she might then need to log out of the account on your their by tapping on the id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in so as to 'refresh' the account on it
If that doesn't fix it then he/she might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

How do i select a particular cell from a AbstractTableModel?

Similar Messages

Maybe you are looking for