How do i set password protection with new software

now that i have updated my imac software to 10.8.3 and updated my airport software as well, it seems that i no longer can password protect my wifi connection.  i'm sure that there must be a way.  can you help?

The easiest remedy will be use another Mac that has an older version of the operating system installed to administer the older AirPort Extreme.
Unfortunatey, Apple dropped support for the older AirPorts in the Mountain Lion operating system.
If you do not have another Mac to administer the older AirPort, there is a workaround that you may be able to use to install a version of AirPort Utilty on Mountain Lion that will work on Mountain Lion.  I need to explain that Apple does not support this, so results cannot be guaranteed. 
For details, see this thread to install AirPort Utility 5.6 on Mountain Lion:
https://discussions.apple.com/message/21397085#21397085

Similar Messages

  • How to transfer a password securely with new customer

    Hello.
    I am using a digest to make an authentification process with existing user (SHA) , but its cannt be used
    when i need to transfer a details of new customer.Here i actually need to transfer the pwd , because
    server doesnt have ideas about the details of this client.
    How can i transfer it securely , without using the SSL and https?
    Thanks
    Oifa Yulian
    [email protected]

    To make it possible to encrypt and decrypt , keys has to be exchanged , of course i can use SSL but i need to have a certificate for it and i dont want to , therefore keys has to be exchanged and we got same problem as before ( client or server sends a key in plaintext )
    there are some special algorthims for keys exchange securely , but i cannt find it
    Thanks anyway
    Oifa Yulian
    [email protected]

  • How can I login to a site that is .htaccess password protected with java

    Forgive me if this is a dumb question. I am have never done this before and haven't been able to find out how to do this. I want to send some xml (passportRequest) to a server that is listening. The hard part is this server is password protected with htaccess. I have the username and password and I tried adding it to the url (ie https://user:password@server....) but not luck. I read somewhere that I can't do that anymore...is that right? I tried the code below but no luck there either. Any of you guys have any tutorials you could point me to or suggestions? Thanks!
    String urlStr = "https://www.myserver.com/pathto/requestlistener";
    URL url = new URL(urlStr);
    HttpURLConnection con = (HttpURLConnection)url.openConnection();
    con.setRequestMethod("POST");
    con.setRequestProperty("Content-type", "application/x-www-form-urlencoded");
    con.setRequestProperty("reqData", passportRequest);
    sun.misc.BASE64Encoder encoder = new sun.misc.BASE64Encoder();
    String encryptedPassword = encoder.encode((customerId+":"+password).getBytes());
    con.setRequestProperty("Authorization", encryptedPassword);

    con.setRequestProperty("Authorization", "Basic " +
    encryptedPassword);should do the trick.AWESOME! I was so close. Thanks for the tip. Does
    "Basic" just tell the server what type of
    authentication to use? What are the other options
    available? Where can I learn more about this stuff?
    I figured it was something simple like that, but when
    no one responded I was beginning to wonder if it was
    possible. I didn't know why it would be (its setting
    headers and that shouldn't matter where you are doing
    it from, browser or code). Thanks again!All of this (including what you have to supply to log in from any client, Java or not) is in the information that the first link in my previous post displays. However - you have to read it.

  • How to set Password protection in excel using java

    Dear all,
    I have no idea to write a java program that how to set password protection in excel. Please give me some solution using java tools. Thank a lot!
    Regards,
    kzyo

    Dear Bamkin ,
    I used your code and paste it in my program. The error is as the follow:
    Code:
         stmnt = c.createStatement();
                   String query = "select StudentNumber, Email, New_Email_Address from [Sheet1$] where Len(New_Email_Address) > 0";
                   System.out.println(query);
                   rs = stmnt.executeQuery(query);
                   stmnt.executeUpdate("SET PASSWORD=PASSWORD('Test')");
    Error:
    (Remark: Invalid SQL statement)
    java.sql.SQLException: [Microsoft][ODBC Excel Driver] �����I SQL ���q���G�a����'DELETE'�A'INSERT'�A'PROCEDURE'�A'SELECT' �� 'UPDATE' �B
         at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6958)
         at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7115)
         at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect(JdbcOdbc.java:3111)
         at sun.jdbc.odbc.JdbcOdbcStatement.execute(JdbcOdbcStatement.java:338)
         at sun.jdbc.odbc.JdbcOdbcStatement.executeUpdate(JdbcOdbcStatement.java:288)
         at hk.gov.edb.util.ExcelHandle.updateNewEmail(ExcelHandle.java:414)
         at hk.gov.edb.core.AppMain.doUpdate(AppMain.java:369)
         at hk.gov.edb.core.AppMain$7.construct(AppMain.java:584)
         at hk.gov.edb.util.SwingWorker$2.run(SwingWorker.java:127)
         at java.lang.Thread.run(Thread.java:595)

  • How do I remove one failing hard drive from raid set and replace with new one

    Last Friday apparently one of my raid drives started failing.
    As I mentioned on this forum I started getting continous beeping.
    I was finally able to get the raid working at a degraded level.  I ordered a replacement hard drive which is arriving today.
    (In the meantime I made twice daily backups of my work.....)
    Below was the message I got from the browser based raid software:
    Blahblah 09    1000.2GB   RaidSet Member SamSung HD103SJ
    Blahblah 10    1000.2GB     Free                 SamSung HD103SJ
    Blahblah 11    1000.2GB   RaidSet Member SamSung HD103SJ
    Blahblah 12    1000.2GB   RaidSet Member SamSung HD103SJ
    (See this earlier thread if you wish!)
    http://forums.adobe.com/thread/727867?tstart=0
    At one point when I did the checked the browser interface I saw the message Failed and Degraded
    As I said, I was able to work over the weekend on the degraded system.
    This morning I got the beeping again and did the rescue and now I am running a "full raid" without the notice that one raid was "Free".
    In any case, the new hard drive is arriving today.
    What steps should I take to incorporate the new drive into the raid system.
    I have one OS drive
    and 4 tb raid drives.   One needs to be replaced with the new one that I am getting today.
    Thanks
    Rowby

    Harm,
    Regarding your comment:
    Re: How do I remove one failing hard drive from raid set and replace with new one
    Please tell me how to read the serial number from an individual drive rather easily, without un-installing them:
    If you select the proper drive to change out, you only need to remove one drive and look at its serial number...
    Step 1: Identify bad drive serial number using Areca's tools
    Step 2: Turn off the computer
    Step 3: Remove what you think is the bad drive based on following your numbered cable method, marked hot-swap bays, whatever
    Step 4: Verify that the serial number matches the "bad drive" serial number from step 1; if it does great, proceed; if it does not match, go back to step 3
    Step 5: Change out the CORRECT drive - that's the bottom line for this whole procedure
    Cheers,
    Jim

  • With new software can not set appointments on calendar. How to do it now

    With new software can not set appointments on calendar. How to do it now

    I'm surprised you haven't received a prompt but you can register here (You don't have to register.) : http://docs.info.apple.com/article.html?artnum=61890

  • How can i set password for a backup?

    ::I am using 10g xe
    I am gettin gbackup through RMAN, how can i set password for each backup? I want to protect my backup so that no one other could use it if he copies the backup files.
    Faheem

    Just use "SET ENCRYPTION ON IDENTIFIED BY password ONLY" command in your RMAN scripts. Look at the advanced backup manual for details: http://download-east.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmbackp006.htm#sthref632
    Daniel

  • How do i set password for one folder ?

    my mobile is nokia e51 , how do i set password for my personal folder ?
    Message Edited by shajeer on 25-Jun-2008 08:21 PM

    how do i use Advanced Device Locks to password-protect the gallery, or individual applications. ? thank u ...
    Message Edited by shajeer on 26-Jun-2008 08:00 AM

  • How do I set Firefox to open new windows in a separate window (not in tabs)?

    How do I set Firefox to open new windows in a separate window (not in tabs)?

    Click the orange Firefox button, and click "Options". This will bring up a new window with a "Tabs" tab at the top. Click that. There will be several checked boxes, including one called "Open new windows in a new tab instead" up at the top of the list. Uncheck that box and you should be good to go.
    ETA: This should also work if you click "Tools" and "Options" within your version.

  • How do I open password protected email attachment?

    Does anyone know how to open a password protected attachment in email.
    My email will not download the attachment if it is password protected

    I have the same problem.  When a password protected attachement is sent to my iPhone, there is no icon attached, only the code in the email.  However, it's normal when I view the email with my PC (Fire Fox or IE).  The same thing happens on the iPhone 3, 4 and iPad 3.  If a PDF file is not password protected, the PDF icon appears and all I have to do is click on it and it opens.  Does anyone have any ideas?  Apple Support is clueless on this one.

  • How to import a password protected p12 certificate to keystore?

    Hi all,
    I am new in java security programming.
    And I got something very urgent need your help..
    How to import a password protected p12 certificate to keystore programmatically?
    Does anyone have sample codes on this issue?
    thanks very much
    Wyan

    Hi omslion,
    I responded to a similar post from you (and moved it to the Acrobat forums). Password protecting a file requires Adobe Acrobat. You are welcome to download a free 30-day trial of Acrobat. For more information, see www.adobe.com/products/acrobat.html.
    Best,
    Sara

  • How can I set up iCloud with my Apple ID

    i bought an Ipad on an rummage sale.  The iCloud is still registered under the previous owner.  I do not know their password (nor them) and an "find my ipad" is turned on.  How can I set up iCloud with my Apple ID?

    Restore it through iTunes
    Regards,

  • HT1386 My system got crashed and I dont have backup fo my iphone.... now how do i synch my iphone with new itunes without loosing my data ?

    My system got crashed and I dont have backup fo my iphone.... now how do i synch my iphone with new itunes without loosing my data ?

    See if this user-tip for syncing to a new computer helps : https://discussions.apple.com/docs/DOC-3141
    If you have music from other sources on your phone (e.g. copied from CDs) and you don't have them on a backup, then there are some program listed half-way down this page which might be able to copy them back : https://discussions.apple.com/docs/DOC-3991

  • HT4623 how do i sync my iphone with new itunes? I cant find the sync button

    how do i sync my iphone with new itunes? I cant find the sync button

    The same way you would sync with any other version of iTunes.
    Connect the device. 
    Select the device.
    Select Sync.
    In the new version of iTunes, the sidebar is disabled by default.  With a device connected, it will be listed in the upper right hand corner.
    If you want the side bar back, type Cntrl + S.

  • I have family plan of 5 iphones and all them have the same apple id, the q. is how I can set each one with their own apple id? please advise...

    I have family plan of 5 iphones and all them have the same apple id, the q. is how I can set each one with their own apple id? please advise...

    See How to Stop Sharing an Apple ID.
    (Note that I am affiliated with that site, and some pages contain ads).

Maybe you are looking for