How do i set tab control page size programmatically?

Hi,
I have a tab control in my program and each page has different amounts of controls on it. I would like to know how I can make the tab control pages resize automatically, only to fit the controls on the page and not have extra space underneath that other pages require.

romulus wrote in message news:<[email protected]>...
> Hi,
>
> I have a tab control in my program and each page has different amounts
> of controls on it. I would like to know how I can make the tab control
> pages resize automatically, only to fit the controls on the page and
> not have extra space underneath that other pages require.
You can use the tab control property 'PaneDimension' to
programatically change the size of the tab control. To
programatically find the areas occupied by the controls on each page:
Use the 'Pages' property of the tab control to get a reference to the
desired page; wire that to a property node and select the
'ControlsOnPage[]' property; iterate through all the control
refere
nces, getting the position and bounds of each control, using
'Max & Min' and shift registers to find the extent occupied by the
controls.
Paul Cardinale

Similar Messages

How do I set a fixed page size in Muse so that the window always stays the same size

how do I set a fixed page size in Muse so that the window always stays the same size

Hi Aish & thanks for responding;
I would like the window size to stay the same for the entire site and not be
able to scale to drag & scale it. ie 950 pixels x 500 pixels.
Thanks,
JB
On 12/4/14 3:30 PM, "Aishvarya Raj Rastogi" <[email protected]>

How do I set a default page size, orientation, and printer for a particular document in Pages?

I have a simple label document in Pages which I print to my label printer. The label is 1.49 x 3.47 inches and needs to print in Landscape, and it needs to print to my Dymo label printer. How do I set up the Page Setup or Print Setup so it defaults to this document size, orientation, and printer, every time, without me having to manually enter those settings every time?

Thank you for your reply. However, I could not get Templates to work correctly for me. Following your instructions, I opened my document, opened Page Setup, set the printer, paper size, orientation, and printed a copy to make sure it was right. Then I re-opened Page Setup to verify that the settings were still correct. Then I saved the document as a Template. Then I found my template in Pages, opened the template, and tried to print. The first thing I noticed was that the template did not remember my printer. Then I set the printer, and printed, but I found that the template also did not remember the page size or the document orientation. So, did I miss a step here? Lion 10.7.5 and Mac Mini.

How do I set a default page size?

When Firefox opens, pages are displayed in about 1/3 the size of the screen. I would like to be able to set a default display size for all pages, in the same manner that I can set a default zoom in Google Chrome.

You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

How do I set the default page size for printing on a 8450.

A few days ago I printed some envelopes and now when I print from some programs, the print page size has remained the envelope size. I want to print from any program on letter size paper without changing the settings every time.
Thanks
This question was solved.
View Solution.

This document can help you set the print settings for any type of printing. Not just for photos as the title suggests. You should not have to keep setting it every time.
Printer settings
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

How do I set a specific page to open when I open a new tab in Firefox? I can open the page when initially opening Firefox, but not for subsequent tabs/pages.

How do I set a specific page to open when I open a new tab in Firefox? I can open the page when initially opening Firefox, but not for subsequent tabs/pages.

You can use an extension to set which page to open in a new tab:
*NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
*My Homepage: https://addons.mozilla.org/firefox/addon/my-homepage/

How do I set the home page for a new tab?

How do I set the web page for when I open a new tab? Whenever I open a new tab it goes to an error site which freezes my firefox browser for a while. How do I change that? I want to open new tabs with google being the home page. I need to set up the homepage for a new tab NOT a new window. Please help! !

If Google is set as your Homepage in Firefox you can middle-click ''(push down on the mouse wheel)'' to open Google in a new Tab.
Or, you can add the feature to Firefox where clicking the New Tab button on the Tab Bar opens your Homepage in a new Tab. <br />
https://addons.mozilla.org/en-US/firefox/addon/new-tab-homepage/
And if you have a different Homepage set, this extension allows for any page you set in the extension's options to open when you use the new Tab button. <br />
https://addons.mozilla.org/en-US/firefox/addon/newtaburl/

How do I make a custom page size in Acrobat X pro?

I downloaded a gigantic trial version of Acrobat X pro to create a full PDF book cover. I was
unable to figure out how to make the program do anything at all. The help file and forums did
not give me the information I needed. Eventually I was able to use 4 other programs in
combination to create a .doc version of the cover but now I need to turn it into a PDF.
Can somebody please tell me how to, or how to find out how to, create a custom page size in
Acrobat X Pro and import a Word document into that page size.
Alternatively perhaps someone could tell me where I can download an earlier, hopefully more
usable, version of Acrobat.

As you have discovered, Acrobat is not a creation or editing tool. It is a program to create a final archive of a document from another application that is readable on most platforms. There have been several tools added to Acrobat to provide more functionality for forms and such, but it was never intended for the creation process.
Now that you have created your cover in WORD, an appropriate place to create it, you would simply print the page to the Adobe PDF printer. You should change the printer in WORD before the conversion and check the page to be sure that it is still what you wanted. This check is needed for versions prior to OFFICE 2007 that used printer metrics by default. Since OFFICE 2007, printer metrics have been turned off by default.
If the page does not come out correctly (like is 8.5X11 letter or an A-4 page), then enter the printer properties before printing and set a custom page size there to match your WORD document. I assume the WORD document has the desired size. The printer property change is like putting the correct paper in the printer before printing. Sometimes it seems to sense the application setting, and yet at other times is seems to need to be set.

Are indicators updated on an inactive tab control page

To decrease loop execution speed (increase acquisition speed) I have placed diagnostic displays on a seperate tab control page which is normally not the active page. The thought is that speed will be increased as these displays would not be updated unless needed (screen I/O is normally time consumming).
Is this a viable method?
Roy

It is not that those controls will not be updated, but the drawing of
those controls on the screen that you save. This can definitely be very
significant. It is also good programming praxis to hide unnecesary
front panel elements.
Also keep in mind that the eye can only handle 10-20 updates a second,
and even that is for most controls much too fast. Lowering the
indicator update rate to, say, 5-10 times a second, can already
achieve major CPU relief. depending on the kind of interfacing I
would go to much slower updates still. If you use big data sets,
you should also try to prevent creating too many copies in memory.

I 'm using ipad 2 and am using iwork pages. how can i set up iwork pages so that a page scroll left to right or right to left instead of just scrolling up?

I am using ipad 2 and am using iwork paged. how can i set up iwork pages so that a page will scroll left to right or right to left instead of just up?

Here you are in a forum dedicated to Pages for OSX.
Most of us don't use Pages for iOS.
Better ask in the iWork for iOS forum :
https://discussions.apple.com/community/app_store/iwork_for_ios
Yvan KOENIG (VALLAURIS, France) lundi 18 juillet 2011 22:38:20
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How can I set a DEFAULT zoom size at ctrl+++ that will hold while changing sites--even in private browsing?

How can I set a DEFAULT zoom size at ctrl+++ that will hold while changing sites--even in Private Browsing?
I'm just starting using Firefox but I won't be using it for long if I have to re-size the screen with every new location viewed.

Try this add-on
[https://addons.mozilla.org/en-US/firefox/addon/6965/ Default FullZoom Level ]

As a writer I'm using Pages to write my documents but the title shows up on every page. How do I set-up my page so that it shows up on only the first page?

As a writer I'm using Pages to write my documents but the title shows up on every page. How do I set-up my page so that it shows up on only the first page?

Don't put it in the Header.
Peter

How do you set defaults in pages such as font and moving between cells in a table?

How do you set defaults in Pages such as font and moving between cells in a table?

Default layout and styles can be set by setting up a sheet with your settings and saving as a user template (File > Save As Template). I don't know of a way to set defaults for moving between cells in a table.

I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign?

I need to create 4 @ A2 boards that print adjacent to one another (all landscape format) with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards? Is it best to use Illustrator(CS3) or Indesign?
Thanks.

Re: I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign
If possible, please try Indesign CS 4.

Adobe pro - print settings: How do i make a custom page size list, which i can copy to my other comp

Adobe pro - print settings: How do i make a custom page size list, which i can copy to my other computers who have adobe pro installed?

your right.. i ment acrobat pro :-)
my problem is that i use the PDF printer to export CAD drawings as PDF´s.
As it is now, there are some pre-defined page sizes in the print settings, and i know i can add custom pages manually one at a time.
What i want is to copy the list of my danish standard page sizes, and use them on my other versions of acrobat.
Its like 70 different sizes, and i have them made manually on my current computer, but i hope its possible to copy the list to other computers.
Maby its some script where i can define the sizes, and then copy to another computer. Im just not that much of a computer genius :-)
Hope i got through this without to many spelling mistakes...
Thanks for helping.

How do i set tab control page size programmatically?

Similar Messages

Maybe you are looking for