How do I set the "Reply To" header in iOS Mail?

On OSX Mail, I am able to type in a "Reply To" address of my choosing when composing mail. On iOS, I can't figure out how to get the mail composition window to show me this field so that I can fill it in.
I own a domain, and so I tend to hand out different addresses for every entity I deal with, making them up on the fly. So, any solution that requires me to 'preconfigure' something is a non starter.
Richard

Hi,
In SharePoint Designer 2013, we can click the code of the Data view web part. Then switch the tab to "OPTIONS". And then we can find the Folder Scope option, you can select "Show All Files of All Folders"
to achieve your requirement.
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Similar Messages

How do I set the "reply to" field in the iPad 2 Mail app? I use an email forwarding service (not an actual email account) that I would like people to reply to.

How do I set the "reply to" field in the iPad 2 Mail app? I use an email forwarding service (not an actual email account) that I would like people to reply to, so setting up an account with the correct reply-to address doesn't work because there's no associated outgoing mail server. I had this working under iOS4 but it seems to have disappeared when I upgraded to iOS5.

Welcome to the forum, NicoleYM. I don't think the Touch Mail has as many options as the Mac Mail app. However, you could set a standard signature. Go to Settings > Mail, Contacts, Calendars > Signature. There you can type a reply address and hope people see it.
Alternatively, you can go to your GMail account in your web browser and click on Settings > Forwarding and POP/IMAP. There you will have an option to forward all emails (or only some, if you set up a filter) to your other address.
Good luck!

How can I set the language when sending an e-mail with attachment - 'Html'?

"Character Broken"
I made an ALV program, and this convert to "HTML', and send an e-mail with this.
Used Process is:
DATA: gt_abaplist LIKE TABLE OF abaplist,
      gt_html LIKE TABLE OF w3html,
      doc_chng LIKE sodocchgi1,
      objpack LIKE TABLE OF sopcklsti1 WITH HEADER LINE,
      objhead LIKE TABLE OF solisti1 WITH HEADER LINE,
      mail LIKE TABLE OF solisti1 WITH HEADER LINE,
      reclist LIKE TABLE OF somlreci1 WITH HEADER LINE,
      lv_line TYPE i.
DELETE FROM MEMORY ID '%_LIST'.
SUBMIT z_template
   AND RETURN EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject = gt_abaplist
EXCEPTIONS
    not_found = 1
    OTHERS     = 2.
CALL FUNCTION 'WWW_HTML_FROM_LISTOBJECT'
TABLES
    html       = gt_html
    listobject = gt_abaplist.
doc_chng-obj_name   = 'URGENT'.
doc_chng-sensitivty = 'O'.
doc_chng-obj_descr = ' '.
doc_chng-obj_langu = '3'.
objhead-line        = ' '.
APPEND objhead.
mail[] = gt_html[].
DESCRIBE TABLE mail LINES lv_line.
CLEAR: objpack.
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = lv_line.
objpack-doc_type   = 'htm'.
objpack-obj_descr = ' '.
objpack-doc_size   = lv_line * 255.
objpack-obj_langu = '3'.
APPEND objpack.
CLEAR: reclist.
reclist-receiver = 'e-mail address'.
reclist-rec_type = 'U'.
APPEND reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
    document_data              = doc_chng
    put_in_outbox              = 'X'
    commit_work                = 'X'
TABLES
    packing_list               = objpack
    object_header              = objhead
    contents_bin               = mail
    receivers                  = reclist
EXCEPTIONS
    too_many_receivers         = 1
    document_not_sent          = 2
    document_type_not_exist    = 3
    operation_no_authorization = 4
    parameter_error            = 5
    x_error                    = 6
    enqueue_error              = 7
    OTHERS                     = 8.
SUBMIT rsconn01 AND RETURN.
I want to show this by "Japanese".
But the character is broken.
LIke This:
u01D1u072C          u0205|            u0205u072C          u0508           QC u04B90m
How can I set the language? How can I solve "Charancter Broken" ?
Plesse, let me know.
Thank you so much.
Edited by: Jaime White 999 on Nov 21, 2011 8:45 AM
Edited by: Jaime White 999 on Nov 21, 2011 8:46 AM

Hi Jaime,
Are you saying, you are getting junk characters in the email attachment? Then pls check the following. Since you want to send Japanese fonts, please pass language 'J' in both objpack-obj_langu = '3' & doc_chng-obj_langu = '3' instead of '3' please replace it with 'J'.
Another thing which you may have to check is the SCOT device type. As I understand from my basis colleague, this may also affect your attachment fonts since the emails are sent through SCOT. Go to transaction SCOT-> Settings-> Device types for format conversion. Check whether wrong device type is defined for Japanese there. Hope this helps
Regards,
Gokul

Changing the Reply-To header from a Mailing List

Hi All,
I'm running JES 2004Q4, and I'm trying to set up a mailing list. The two ways I have done it so far, was to create a user and forward the mail from that user to the mailing list users using the forwarding options in the web mail gui, and the other way was to create a group and foward the mail to users that exist in the LDAP directory.
My question is, as you can guess from the topic subject.... Can I get the Reply-To address added to the mail envelope when mail is forwared from either the user or group??
This is so when people reply to a mail sent via the list, they will reply to the list and not the person who sent it.
I'm hoping I won't have to use program delivery and write a script to do it. :-)
Cheers and thanks,
Stuart.

One thing you need to understand is the difference between a "group" and a "list". Mails sent to a "list" automatically get the list name as "reply-to". Groups don't.
The difference is an ldap attribute. Please see the "provisioning guide", specifically the chapter on provisioning mailing lists:
http://docs.sun.com/source/816-6018-10/groups.htm#1000867
(I know this is the 5.2 provisioning guide, but this piece hasn't changed at all)

How do I set the Track Header in such a way that both the solo and mute are turned off?

How do I set the Track Header in such a way that both the solo and mute are turned off?

Another possible solution is to use a battery grip on your 70D and see if the dial on the grip will change the shutter speed.
There are some discussions about this problem on some earlier models Canon DSLR. Check it out.
http://www.dpreview.com/forums/thread/2638326

How do I set the default text in a bound textbox?

How do I set the default value of a bound textbox when the AddNewItem button on the MenuStrip is clicked?
I have the following code (see below), but for some reason it does work when I put the code in the
AddNewItem_Click event; however, it does work if I put it in the
Form's Load Event. The statement in question is Me.txtBusUsagePct.Text = 100.
What am I doing wrong? Why can't I set the default text in the AddNewItem_Click
event?
Private Sub BindingNavigatorAddNewItem_Click(sender As Object, e As EventArgs) Handles BindingNavigatorAddNewItem.Click
Me.txtBusUsagePct.Text = "100"
End Sub
BobV365

Hello,
Here I am using mocked up data but the important thing is after loading the data. Requires on the form a BindingNavigator and two text boxes.
Public Class Form1
WithEvents bsData As New BindingSource
Private Sub Form1_Load(
ByVal sender As System.Object,
ByVal e As System.EventArgs) Handles MyBase.Load
Using MockedData As New DataTable()
MockedData.Columns.AddRange(New DataColumn() _
New DataColumn("PartName", GetType(String)),
New DataColumn("partqty", GetType(Int32))
MockedData.Rows.Add(New Object() {"Part A", 100})
MockedData.Rows.Add(New Object() {"Part 99", 34})
MockedData.Rows.Add(New Object() {"Part B", 4})
bsData.DataSource = MockedData
End Using
CType(bsData.DataSource, DataTable).AcceptChanges()
BindingNavigator1.BindingSource = bsData
TextBox1.DataBindings.Add("Text", bsData, "Partname")
TextBox2.DataBindings.Add("Text", bsData, "partqty")
End Sub
Private Sub bsData_AddingNew(
ByVal sender As Object,
ByVal e As System.ComponentModel.AddingNewEventArgs) _
Handles bsData.AddingNew
Dim dv As DataView = TryCast(bsData.List, DataView)
Dim rv As DataRowView = dv.AddNew()
rv("PartName") = "(new)"
rv("partqty") = 0
e.NewObject = rv
bsData.MoveLast()
End Sub
End Class
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile
but do not reply to forum questions.

How can I set the insert date to auto update in Pages 5.2.2

how can I set the insert date to auto update in Pages 5.2.2
I am attempting to have the date in header auto update in a Pages file.
I can insert it, but where is the AUTO UPDATE selection
OS10.9.4
thank you

Apple never included the auto-update feature for dates in Pages v5.2.2. You would have to single-click the date, and deliberately update it.
If you have Pages ’09 v4.3 in /Applications/iWork '09, then it will allow you to configure auto-update of the date field. Right-click on the date, set the format, and click the selection for automatically update on open.

How do I set the CoreTable sort column in the managed bean?

I have a CoreTable with two columns, first name and company, from the managed bean in a session scope, how do I set the company column to be the default/selected sort order?
Or is that done by binding the af:column to a CoreColumn object in the managed bean, which method would I use?
<af:column sortProperty="company" sortable="true">
<f:facet name="header">
<af:outputText value="#{common.labelCompany}"/>
</f:facet>
<af:outputText value="#{row.company}"/>
</af:column>
Thanks,
--Todd

Yes, I know, "sortable", see, I even used it in my example. I don't want to disable default sorting.
What I'm asking is how to have more than one sortProperty. When the user clicks the column heading, I want to sort by "myFirstProperty" AND "mySecondProperty". The sortProperty only seems to allow one sort property.
One possibility seems to be to programatically add items to the List of SortCriterion objects as in your example, but where would I put this code so that it is executed when the user clicks the column heading, but before the table is sorted.

How do we determine the HTTP authentication header for our hosted solution?

How do we determine the HTTP authentication header (adobeconnect_admin_httpauth) from our hosted solution? The documentation says to find it in a custom.ini file but I have no clue how to access that.
I need to supply that to the adobeconnect plugin used with a Moodle instance, screnshot below.
If it helps, when I click "Test Connection", I see the following output.
A series of tests have been run in order to determine whether the Adobe Connect Pro server has been properly setup for this integration to work and to also determine whether the user credentials provided in the activity global settings has the correct permissions to perform the neccessary tasks required by the activity module. If any of the tests below have failed, this activity module will not function properly.
For further assistance and documentation in how to set up your Adobe Connect Pro server please consult the MoodleDocs help page for this activity module Help page
Sending common-info call:
successfully obtained the session key: na11breezrirhb4f4ryf5shqy
successfully logged in as admin user
Testing retrevial of shared content, recording and meeting folders:
error obtaining shared content folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error obtaining forced-archives (meeting recordings) folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error obtaining meetings folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error creating meeting testmeetingtest folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-update</param><param name="type">meeting</param><param name="name">testmeetingtest</param><param name="folder-id"/><param name="date-begin">2015-03-14T06:53:39.000+00:00</param><param name="date-end">2015-03-14T07:53:39.000+00:00</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="invalid"><invalid field="folder-id" type="id" subcode="format"/></status></results>
error creating user testusertest
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">principal-update</param><param name="first-name">testusertest</param><param name="last-name">testusertest</param><param name="login">[email protected]</param><param name="password">9B396EA828A00203FB3E8E69010FE537</param><param name="extlogin">[email protected]</param><param name="type">user</param><param name="send-email">false</param><param name="has-children">0</param><param name="email">[email protected]</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
What are we missing?
Thanks!

Here is the docuementation for loging in with an HTTP Headder Adobe Connect 9 * Log in from an application
Seeing as there may be some modification to files on the server, you may need to work with Adobe Support to see if they can be modified in the Hosted environment.Adobe Connect Help | Adobe Connect Support

How do you set the left hand margin when writing emails. Some characters disappear off of the left side of the page because the margin is so close to the edge

When writing emails the left hand margin is so close to the edge of the page that some characters disappear from view on the left hand of the page. How can I set the left hand margin to not be so close to the left edge of the page?

Oy. You beat your head for hours and finally concede to asking for help, only to solve it two minutes later. Here's the answer.
In the inspector, on the Layout tab, there's a checkbox that reads, "Show Thumbnail Track".
UNCHECK that box and the gutter goes away.

How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE ?

We are using B2B & OSB to send out messages via eBMS protocol
So basically this are the two use cases
1) EBusiness Suite => B2B => OSB=> Customer for the outbound Shipment Notices
2) EBusiness Suite <= B2B <= OSB<= Customer for the Inbound acknowledgement
We are able to use standard B2B functionality to send out the messages using eBMS with https and client certificates
On the way back from the customer, we are using OSB that gets the raw data and the body gets sent to B2B
On the outgoing part a message gets created in B2B and is at MSG_WAIT_ACK
When the acknowledgement comes in, it comes as a seperate messgae in B2B and is at MSG_COMPLETE
How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE?
We use JMS and have played around with jca.jms.JMSProperty.INREPLYTO_MSG_ID but that is not propagating to REFER_TO_MESSAGE_ID in B2B_BUSINESS_MESSAGE table
I tried using jca.jms.JMSProperty.CONVERSATION_ID as well but no luck
Any response is highly appreciated!

Are you asking about your own JavaMail code or about somebody else's web-based mail agent?
If it's the latter (which is what it sounds like) then you find the checkbox in the preferences configuration, or whatever they call it, which says "Include original message in reply", or something like that. If such a thing exists, that is. If you're thinking that the e-mail message controls how their code formats replies to it, that's not how it works.
Even Outlook lets you configure how replies are formatted, the only difference is that the Outlook default is to include the original message and your web-based agent's default is to not include it.

How do I set the length of each clip?

I have just begun trying to build a video with Premiere Elements 10
I have created many videos with Windows Movie Maker..found it boring for Effects etc.that's why I have this new software.
Now my question is ..How do I set the time for each clip?
I like to add a clip that goes with each lyric in the song.
Thanks.

Welcome to the forum.
As Steve points out, that is "editing."
One can use either of two Tools in PrE, to Trim the Clip to suit.
First, one can Dbl-click on the Clip in the Project Panel to open it in the Source Monitor, which looks a bit like the Program Monitor, but it has the In & Out Point settings. When that Clip has been Trimmed, as needed in the Source Monitor, just drag it to the Timeline.
Or, one can drag the Clip to the Timeline, and then click+drag on the Head of the Clip to set its In Point, and on the Tail, to set the Out Point.
Good luck,
Hunt

How to change set as reply

how to change set as reply email address on bulk users?

Hello,
I'm marking the reply as answer as there has been no update for a couple of days. If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support

How do I set the thumbnail image of my videos that export to my computer? I'm using Premiere Elements 11 on a windows 8.1 PC 64bit.

How do I set the thumbnail image of my videos that export to my computer? I'm using Premiere Elements 11 on a windows 8.1 PC 64bit.
Or how does Premiere 11 determine where to set the image for the video it is exporting?
I already know how to use Freeze frame and save the image to my computer by Publish+Share/Computer/ Immage.
Thanks,
Mike

Mike
This is not Adobe. Rather user to user. We are all visitors here.
Just a bit of history....back in the days of Premiere Elements 4, you could set a "poster frame" in what was called the Project area. You did this by right clicking a blank area there and, from the drop down menu that appeared, selecting View/Preview Area, and using the poster frame feature there.
As I said, when a video imports into Premiere Elements, the thumbnail of the import has been presenting as the first frame of the video. With this Preview area "poster frame" option, you could set the video's thumbnail in the Project area so that the first frame was another frame in the video. But, this "perk" was restricted to thumbnails of the video in Project area.
If you exported to file with the first frame modified video, the export's thumbnail in Windows Explorer would present with other than the real first frame or the poster frame as the first frame.
Also, in more recent versions, I have observed that the export to file does not display the real first frame of the video in Windows Explorer. Seems random, but I have not kept track.
And, remember, at the onset I wrote
As far as I have ever seen, Premiere Elements Windows uses the first frame of the video for its thumbnail in the program.
I know of no way within Premiere Elements to control what the program opts to do in this matter. In some compatibility
issues, it opts to give no image but a generic one.
I did not say that you can expect to have the Premiere Elements' export file's thumbnail in Windows displaying with its real first frame. And, the more you get into this, depending on the versions, more details need to be added to my comment about "...first frame of video for its thumbnail in the program..."
I would have to look into all this further to get perspective on the contributing factors.
ATR
Add On...The Poster Frame feature appeared in versions 4, 7, 8, and 9 by my count.

How do you set the time period on IMAP email accounts (razr maxx)

Hi Guys -
Does anyone know how you can set the time period that the stock email will keep the already downloaded messages for IMAP email accounts?
Mine never seems to show more than a couple of days worth at a time. I'd ideally like to be able to see at least 2 weeks worth of messages without needing to download them again!
On other phones I've had there was a setting in the menu, but either I can't find it...or it's not there. I've found the setting for how OFTEN it checks the accounts, but not the setting I am seeking.
Your help is appreciated!
Best Wishes for the Holiday Season.
-Rich

Hey Rich. Once in 'settings,' there should be a "days to sync' under the 'data usage' section. You don't have that?

How do I set the "Reply To" header in iOS Mail?

Similar Messages

Maybe you are looking for