How do I stop iWeb outputting multiple image files? It makes my site slow!
I'm a professional web designer (but don't let that put you off) who uses Dreamweaver and also handcodes HTML & CSS websites at work on a PC, but having got a new Mac for home use I thought I'd give iWeb a go for a personal site hosted on .Mac, showcasing my music and film efforts, that I didn't want to have to think about coding.
I've built a short little site using the attractive 'Travel' theme, just 5 or 6 pages so far, and have not yet added any multimedia content. However, it seemed to take ages to upload it when I published it to .Mac. So then I went to view it, and it was soooo sloooow to download each page, even on my 4mb cable connection. I know it's a fairly graphically-rich theme, but still!
I noticed that it was redrawing the navigation menu each time... and upon close inspection of the HTML code using Safari's 'View Source' to my horror I found out that that each page has a seperate '_files' folder that contains multiple versions of files that are also used in other pages - including navigation buttons and background images. I also saw that every element has styling applied to it 'inline' in the code, rather than in a single seperate style-sheet.
To confirm this I published it to a folder on my hard drive and checked it all out. What a mess!
As a WYSIWYG web page editor iWeb is great but it's an undisputable fact that the HTML markup and CSS code it produces is absolutely appaling. What's worse though is that it also renders whole swaithes of text as images and that it does create seperate folders for each pages content including images, CSS code and navigation buttons - so even though the same images and code are used throughout the site for the background and buttons and layout, they are written out as seperate files and have to be reloaded with every page!!!
This means that the .Mac server must be getting hammered and webpages are very slow to download and slow to render in Safari - it's almost like dialup when I'm viewing my iWebsite, and like I said, I've got a 4mb cable connection!
Looking at the code iWeb produces, it is good to see that tables are not used for layout, and that's one thing in its favour. But surely the whole point of providing 'themed' templates for users is that the same content is used across the site and therefore doesn't need to be created multiple times - one of the benefits of using CSS stylesheets. Why doesn't iWeb create a single stylesheet and make efficient use of repeated images instead of creating multiple instances of the same file for each page?
Perhaps there is a setting somewhere I've missed. If so, let me know someone!
It is a great WYSIWYG editor, but behind the scenes it's not efficient, it's not clean and simple and it's certainly not attractive - and I'm surprised at that coming from Apple! I know iWeb is a great tool for beginners and I'm a picky professional, but if I was Joe Public First Time Web Designer I'd be very annoyed by this.
Clean it up and sort it out Mr Jobs!
PS: Also, where does iWeb store the website whilst it's in production? I can't find it anywhere?
Your iWeb Site is stored not on your iDisk, but on a file named Domain.sites in your ~/Home/Library/Application Support/iWeb/ Folder.
If , for whatever reason, you wipe your HD and/or lose this file (Get a new computer, Re-Install your OS, Stolen Laptop, Crashed HD, Etc.) without backing-up your Domain.sites file then you will have to re-build your iWeb sites from scratch again.
Of course you can edit your Published HTML files in a different program such as Dreamweaver or even Text Edit. You just can't edit Published HTML files in iWeb. Not at this time at least.
Use iWebBackup to backup your Domain file to a Blank CD or DVD. Backing up your Domain file to another folder on your computer is not fully backing it up. If your computer gets stolen you still lost the file but if you have your Domain file burned onto a CD you have a backup!
Download iWebBackup Here
You can use iWebExtender to automatically consolidate your files into one folder and delete multiple images.
http://iWebFAQ.com
Similar Messages
-
How do I stop getting aclk (GIF image,1x1 pixels) when selecting some pages
How do I stop getting aclk (GIF image,1x1 pixels) when selecting some pages
== This happened ==
Not sure how often
== opening some pagesIt is Kaspersky that is doing that. It intercepts the content and passes that image to Firefox instead of the real content. You should complain on the Kaspersky forum about this if you disagree with the decision made by Kaspersky to send such an image in this case.
You can look at Adblock Plus instead.
* Adblock Plus: https://addons.mozilla.org/firefox/addon/adblock-plus/
You need to subscribe to a Filter list (e.g. the EasyList).
* http://adblockplus.org/en/subscriptions
* http://adblockplus.org/en/getting_started -
How do I stop LR4 from organizing imported files into a folder by date.
How do I stop LR4 from organizing imported files into a folder by date. Most times when I import files I have already created a folder and sub-folder structure tyat I want to use. I then right click the desired folder and choose import into this folder option. Why does LR4 insist on organizing my already selected destination into a sub-folder with a date by default?
TimHillPhotography23 wrote:
Most times when I import files I have already created a folder and sub-folder structure tyat I want to use.
If you do it this way all the time consider a different approach:
Manually copy your images from the card into your desired destination folder in the Finder/Explorer. Once complete drag&drop that entire folder into Lightroom. When the import dialog pops up select to Add the images to the catalog (not copy or move). You will end up with the exact folder structure reflected in your library. -
Selecting multiple image files on the 'insert picture' menu in word
Hi there,
I am trying to insert multiple pictures at once into a word document, on office for mac 2011.
I am using the 'insert picture' option from the toolbar. Shift-click doesn't work like on a PC, and i have tried a variety of button combinations that don't seem to have any effect! Is there any way around this so I don't have to insert picture files into a word document one at a time?
Thanks!You are right, it does not work. Here is a workaround by doing an intermediate stopover in TextExit (it's in your Dock and/or in your Applications folder):
In the Finder, select your multiple image files
Right-click (or control-click) and select "Copy # items"
Go to TextEdit and paste
Do Select All (Command A) followed by Copy (Command C)
Go back to Word and paste your heart out -
Merge print multiple image files on one page
Hello,
A Windows 7 end user seeks for a technical support from me. She tries to merge print multiple image files (JPEG) by using the following steps :-
1) highlight more than 1 files
2) [Right-click] then Choose [Print]
3) she could print the multiple images on ONE page successfully when she initially bought/used this Win7 computer , but recently (these 2 months) she got the error : pop up a few dialogue windows saying "Insufficient memory"
4) I helped her to close all other applications software and found no high CPU/memory processes and also asked for help from hardware manufacturer and got NO virtual memory and physical memory full error by running a utility tool provided.
The hardware config :-
- Windows 7 Prof Service Pack 1 64 bit
- 4GB memory
- i5 Intel CPU
Anyone can help me to fix the issues for my end user ?
Thanks in advance
Regards,
BruceHi Bruce,
In addition to above suggestions, this issue can also be caused by corrupted user registry key.
Please test the issue in new user accout.
If the issue doesn't happen under new user profile, I suggest you repair corrupted user profile:
Fix corrupted user profile
http://windows.microsoft.com/en-us/windows/fix-corrupted-user-profile
Kate Li
TechNet Community Support -
HT204003 how can i print a boarding pass image file from passbook?
how can i print a boarding pass image file from passbook?
I do not believe that Passbook supports printing. You can email, but not print. Then again I'm not sure what it actually emails, if that is a graphic of the card or what. I'm going to try it with my Starbuck's card, but there is no setting for printing within Passbook.
EDIT: Actually it sends the email as an attachment for a Passbook card file, that cannot be handled by my computer. Hope that answers your question.
Message was edited by: ChrisJ4203 -
How do I stop iWeb turning my .jpgs into PNG's ??
Hi
No one on a PC can print out my iWeb pages because when I drag a pic into iWeb it auto makes it a PNG. (unreadable from some PC's) How can I stop this from happening so that people can print ok from my site?
Thank you
Jim Rhodes
http://web.mac.com/jimpsky/iWeb/Craiganor/Craiganor.htmlThnx Mark
I figured iWeb might be doing this and it seems impossible to fix. Here, as always I optimize all my pics in PS for the web as jpg,s. I've noticed iWeb actually makes some of my pics bigger! after optimizing if I resize the pic in iWeb. It shouldn't do this anti optimization.
I have another site on a different .mac account that, after growing past a point, now converts all the text to jpg so no text can be copied. http://web.mac.com/hueynrolf/iWeb/BWA/Home.html
but still here no PNG file conversions.
The "Craiganor" site in question, was added to an existing iWeb project (Domain) ;
http://www.rospalmerinteriors.com/RosPalmerInteriors/news.html
Rospalmerinteriors, published to a .com and mirror on .mac, works well. With a little tweaking i managed to prevent it from converting text to jpeg and no auto jpg to PNG conversions. The Craiganor site does convert the jpgs to PNG!
1. Is this occurring because Craiganor is the second site ? I suspect so.
2. Will rebuilding the site (would rather not) in its own iWeb Domain Solve this?
2. If so and I rebuild the site with it's own Domain, separately publishing Rospalmerinteriors and Craiganor to the same .mac, will I encounter functionality problems with the .mac specific aspect ?
Many thanks
Jim -
Anyone got a script to import multiple placed images into CS4? or is this possible in CS5?
and can we output multiple layers into a single PDF in illustrator? Or multiple layers into single JPEGS from illustrator with one command instead of individually saving out each page... would be a huge time saver for me.
Currently I output each completed layer individually and then right click those outputted jpegs in their output folder and choose "combine supported files into acrobat..." to make a single acrobat file..
I`d also like to be able to CTRL click multiple layers and go save as... only those layers get saved out...
And so adding something in the Save for PDF output dialogue box to save layers to multiple pages would be a helpful time saver..In CS 4 and CS 5 you can drag and drop fro m the finder or the Bridge, and I guess any other similar type viewer, multiple number of image files to a document. You can configure the bridge in such a way as to allow you to see the Bridge and your document at the same time for this very purpose.
If you just drag and drop the files are linked if you drag while holding the shift key then the files will be embedded.
ID and PS CS 5 have a minibridge which works the sam way but is an actually panel and will stay in the front.
I separate the images but they import one on top of another. -
How do you stop adjustments to the image when importing pictures?
When I import pictures into Lightroom 1.1 they all automatically get adjusted to be much brighter. How do I stop this? The DEVELOP SETTINGS DIALOG in the IMPORT PHOTOS pop up box is set to NONE. I don't think it's a color management issue as the images are imported with a normal brightness/color balance and then get their settings changed one by one. Opening an image in Photoshop CS3 with the EDIT A COPY WITH LIGHTROOM ADJUSTMENTS radio selected opens up the modified brightened image. Opening that same image in Photoshop CS3 with the EDIT ORIGINAL radio selected opens a normal image with correct brightness/color balance.
This is driving me mad! I don't want these adjustments. Please help!It's not turned on by default, that I know of. Somehow, yours got that way.
As to where it's located, I would like the preferences to be distributed around the application rather than concentrated in one place. I agree with you that this one should be in the import dialog. -
How to remove "Blue filter" from multiple images in the History Panel
I am using Lightroom 4.3 on Windows 7 pc. I have a collection with approximately 650 images. I was working in the collection and had all the images selected. Somehow I inadvertently must have hit a keyboard shortcut that effected all the images. All of the images are negatively effected and they now look terrible. When I go to the History Panel, all the images have "blue filter" as their most recent entry. If I select one image and go back to the step before the "blue filter" everything looks fine again. My problem is I have this effect in 650 images. When I try and do the change in one image and then synch to the rest, I don't know what box to check to remove this "blue filter" that has been added to all the images. I know I can do them one by one, but with 650 images, it's a long and tedious process. Any way I can remove the "blue filter" from multiple images in a collection?
Thanks,
Matthew KrausIf you’ve just done it, then an Undo operation would reverse things on all the images, I think. But if it took you a while to see the problem, then you might have done something to cancel the undoability.
Isn’t Blue Filter a built in LR preset that modifies the HSL settings: http://kb2.adobe.com/community/publishing/924/cpsid_92473.html
Open the HSL panel and step back into History on one of the affected images so the effect of the Blue Filter preset has been undone and notice what HSL sliders change, and then if the 650 images DON’T already have any HSL adjustments you should be able to sync JUST the pre-Blue-Filter HSL adjustments (perhaps all zeros) to the other 650 images. -
How to flip through multiple image files in a folder using Preview?
On windows a default image viewing program similar to preview allows a user to press the arrow keys to flip through images within the same folder as the image file originally opened with a Preview-like application.
How can a person filp through images in the same folder with a few keystrokes using Preview?
thankshmm...you mean there isn't a way to simply skim
through images in a folder using an arrow or page-up
key?? That's kind of disappointing...especially
being forced to pre-select images...
oceanbluesky,
There's no reason you can't use Preview to do what you're trying to do. And there's no need to pre-select images.
The trick is to open Preview first, and then choose Open from the File menu (or Command + O on the keyboard). When Preview's Open dialog window appears, navigate to the folder which contains your pictures. Highlight the entire folder and then press the Open button. Once the folder is open in Preview you should be able to use your arrow keys to flip through...
Note: To avoid a storm of images from opening on your desktop, go to Preview > Preferences > Images and make sure that the "Open each image in its own window" radio button is not selected.
Good luck!
Andrew99
iMac 1 GHz Flat Panel 15" PPC 768 MB RAM Mac OS X (10.4.10) -
How to paste exposure setting to multiple images
Hi all:
I know this question has probably been asked many times but I couldn't find any answer using the search so please be patient with me. :)
I came from the world of RawShooter Premium and I realized that my version of RSP can't read RAW file from the Canon 30D so I got the Adobe Lightroom to process my images. All is well until I decide to paste the exposure setting from one image to multiple images. I know there is a copy and paste button in the "develop" mode but it doesn't paste the settings (color temp, exposure, noise, etc) to all the images even when I highlighted the images I want to paste. I can do that in RSP, which save a lot of time.
Can anyone shed some light on this? I would really appreciate it.
Thanks in advance.
BenIn develop, copy and paste only works on the selected image. You can sync or auto sync (control-sync) there.
If you want to copy and paste to multiple images using shift-control-C and shift-control-V, you can do that in grid mode. -
How do I stop DW CS6 randomly changing file permissions via FTP?
How do I stop Dreamweaver CS6 12.0.1.5842 randomly changing file permissions when it uploads files to my web server via FTP.
I can no longer trust Dreamweaver to upload websites correctly as it changes permissions on some files which then deny the server access to the file which in turn makes the webpage unreachable/return a 403 error.
This is driving me insane.
I'm using an early 2011 Macbook Pro 10.7.5.Hi,
I'm having this problem too. Has Adobe fixed the issue yet? This appears to be an Adobe problem, not all the web hosts out there. CS6 is ramdomly (meaning: not every time) changing permissions on files uploaded with it and is not usable for web work until this problem is fixed by Adobe or a solution is provided. If I wanted to use a separate FTP program I would not have recommended that my employer buy multiple Adobe CS6 product licenses. One of the primary appeals of DW is the integration of FTP into the workflow.
I am using a destop iMac2.8 GHz Intel Core 2 Duo, 4 gigs of 800 MHz DDR2 SDRAM.
OSX 10.7.5
I am using DW Version 12 Build: 5808
Dreamweaver CS4 that I was using until this new purchase was working just fine. No file permisssion changes. I am being forced to go back to using it until Adobe posts a fix for this.
I should ask while I'm here: has anyone found a solution for this yet?
Thanks,
-c- -
How to download a smartform output as excel file WITH EXACT LAYOUT.
Hi,
I have searched the forum but could not found any satisfactory answer. I have a smartform with a table, some texts and a logo. I have to write a code which will save the smartform output as excel file in the system keeping the layout of the smartform output EXACT.
i.e., the excel file will contain the output with EXACTLY THE SAME layout as would have been for a pdf file (if the smartform output is converted to a pdf file) and the client can then edit the fields of the table in the excel file. How can I achieve this? Please give a suggestion.. Thanks in advance.Hi Anirban,
Your Requirement is to download a smartform to microsoft Excel .
Well unfortunately we can only download data into excel which is in a tabular format i.e stored in internal tables we have function modules to do the same even u can do that using OLE2.
If u try to download a smartform to Excel only format supported will be ASCII, if u will continue with that the smartforms text's will get downloaded to excel but whole data would be downloaded in a single Cell.
Code to do the same is -
>>>>
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
EXPORTING
i_language = v_language
i_application = 'SAPDEFAULT'
IMPORTING
e_devtype = v_e_devtype.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = w_form
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
FM_NAME = w_fmname
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE E002(zcpm) WITH 'Smartform call fails'.
ENDIF.
wa_outopt-tdprinter = v_e_devtype.
wa_ctrlop-no_dialog = 'X'.
wa_ctrlop-getotf = 'X'.
CALL FUNCTION w_fmname "'/1BCDWB/SF00000025'
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = WA_CTRLOP
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
OUTPUT_OPTIONS = WA_OUTOPT
* USER_SETTINGS = ' '
IMPORTING
* DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO = T_OTFDATA
* JOB_OUTPUT_OPTIONS =
* document_output_info = st_document_output_info
* job_output_info = st_job_output_info
* job_output_options = st_job_output_options
TABLES
T_FINAL = T_FINAL
T_ZSDT_WAGONS = T_ZSDT_WAGONS_1
T_QTY = T_QTY
T_QTY1 = T_QTY1
T_CON1 = T_CON1
T_CON2 = T_CON2
"T_ZTMM_OUTWB_TXN = T_ZTMM_OUTWB_TXN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
T_OTF[] = T_OTFDATA-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'ASCII'
max_linewidth = 132
* ARCHIVE_INDEX = ' '
IMPORTING
bin_filesize = w_bin_filesize
TABLES
otf = t_otf
lines = t_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
if tabix_m = 1.
*CALL METHOD cl_gui_frontend_services=>file_save_dialog
*CHANGING
*filename = w_FILE_NAME
*path = w_FILE_PATH
*fullpath = w_FULL_PATH
** USER_ACTION =
** FILE_ENCODING =
*EXCEPTIONS
*CNTL_ERROR = 1
*ERROR_NO_GUI = 2
*NOT_SUPPORTED_BY_GUI = 3
*others = 4
*IF sy-subrc <> 0.
*MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
CALL function 'TMP_GUI_BROWSE_FOR_FOLDER'
EXPORTING
WINDOW_TITLE = 'Select A File Folder'
INITIAL_FOLDER = 'C:\'
IMPORTING
SELECTED_FOLDER = W_PATH.
endif.
CONDENSE W_PATH.
concatenate W_PATH '\' wa_final-vbeln '.XLS' into w_FULL_PATH.
****************************************************************************Saving the PDF file on to Application server************************
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = w_bin_filesize
FILENAME = w_FULL_PATH
FILETYPE = 'BIN'
* APPEND = ' '
* WRITE_FIELD_SEPARATOR = ' '
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = ' '
* WRITE_LF = 'X'
* COL_SELECT = ' '
* COL_SELECT_MASK = ' '
* DAT_MODE = ' '
* CONFIRM_OVERWRITE = ' '
* NO_AUTH_CHECK = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = ' '
* TRUNC_TRAILING_BLANKS_EOL = 'X'
* WK1_N_FORMAT = ' '
* WK1_N_SIZE = ' '
* WK1_T_FORMAT = ' '
* WK1_T_SIZE = ' '
IMPORTING
FILELENGTH = w_filesize
TABLES
DATA_TAB = t_pdf_tab
* FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
As u said ,u want to download a smartform to Excel it could be done but only if u r using a internal table and exactly printing line by line values in the smartform, But if u are performing calculation in between, using multiple internal table Work areas, structures, etc i.e if whole smartform is developed with many distributed windows , unfortunately it wont be possible to download a smartform to excel in such cases, because the whole output comes from multiple internal tables, calculations, etc all the data is not printed in a tabular manner so in such a case it would be just impossible to download the smartform to excel.
But we definitely have a workaround which could be done to download the data into excel.
you can develop a ALV report with a header and footer u can define the header and footer of the alv according to the smartform and the middle portion would contain the tabular kind of data which u must be using as Smartform table to print the same.
So if u have a similar kind of smartform with some header data, tabular data, and some footer data, then u can use ALV to do the same thing , advantage with ALV would be that u can easily download the same into excel.
Other alternative is that u can Convert and download the smartform to PDF and copy the same to an Excel wooksheet.
These are all the possibilities with which u can do the same.
Regards,
Akash Rana -
Suddenly can't open multiple image files in CS5
I recently transferred LR 5.3 and CS5 (12.04x64X) onto a new PC (OS Windows 7 64-bit). Both programs are working fine individually. And single images in LR open just fine for editing in CS5. But when I try to open multiple images (to merge as a panoramic) or open multiple images as separate layers, nothing happens. CS5 opens on top of LR, but the files themselves never open. No problems doing this a few days ago with my older computer (same programs, same operating system).
Any suggestions for fixing this would be much appreciated.When you say nothing is showing up, do you mean it is as if you didn’t use File / Open, or is it more that there is something but it is gray or white or black without any image detail? If the latter, perhaps something like a video driver update or system-level change has made things incompatible with how PSE11 tries to display images.
Have you rebooted?
Have you reset your preferences? You can do this by holding down Ctrl-Shift-Alt at the same time while PSE11 is starting up (or at least while the editor is starting up) and you’ll get a message about deleting the preferences file or not before you see the splash screen. Various other key combinations will ask for an additional plug-ins folder or a different scratch disk location. If you are going to delete your preferences file you might want to review the settings, first, in case there is something important you need to reconfigure once the preferences have been reset.
Maybe you are looking for
-
Mail window does not close anymore
When I press the red dot or type CMD-W, the mail window does not close anymore. It just stays open, everything else works as usual. Any ideas, how to close the window again? TIA
-
Mobile Accounts take a long time to sync at startup
I want to use mobile accounts as a way to authenticate to the network. I also want to sync some of these users to their home directories located on the server, but I want them to be able to log into any computer relatively fast. I have disabled synci
-
Can't stop "Start new clip at each scene break"
I have gone to Preferences/import and unchecked the box TWICE, yet when I start importing it invariably ends the clip at 19:54:06 then stops importing. If I click IMPORT again, it brings in another 19:54:06. What do i have to do so it will import wit
-
I am getting and error code 150:30 when I try to use my CS4 AI, PS and AE. I tried uninstall and install again but same code
-
HT4796 transferring information less than a minute remaining hung up
just started up a new iMac and using Migration assistant. seems to be hung up as "less than a minute remaining" for over 2 hours. any ideas?