How do I tell if a particular update rule is used

I have inherited a sales reporting application in BW 3.5. It has update rules from 2LIS_13_VDITM to 4 level 1 ODS. There are update rules from those 4 level 1 ODS to Level 2 ODS and cubes. So far so good. However there are also update rules from 2LIS_13_VDITM to the L2 ODS and to the cubes direct.
My belief is that these update rules are never used. This is based on the production infopackage settings which do NOT have these objects ticked as data targets. However i would like to know for sure that these update rules have never been used.
Question: Is there a way to tell this eg.
a) is there a table linking infosource to destination with a date last used,
b) or a table linking infopackage to destinations showing when a particular destination was last changed,
c) or some other mechanism?

Hi,
Chk the L2 ODS which have update rules from 2LIS_13_VDITM if it has data loaded in it in production.
If its loaded means it is used.
You can also chk whether the InfoPackage which loads this data is used in any process chain, and then chk if that chain is scheduled in production.
Regards,
Mansi

Similar Messages

How do I tell if a mysql update was successful?

How do I tell if a mysql update was successful?
I need to know if an update was run or if the record was not found.... is there some way that coldfusion can use that traps success/fail resoponses from mysql [linda like myquery.RecordCount ]?
basically I am trying to update a row, if no row was updated - the record must not exist so I then need to do an insert...
-any ideas?
-sean

here is the test query:
<cfquery name="qry" datasource="#application.dsn#">
     update DISC_CUST set DISC_PriceChange = '222222', DISC_TaxablePriceChange = '2222222'
     where DISC_ProdID = '1129'
</cfquery>
<cfdump var="#qry#" />
the error is "Variable QRY is undefined."
if you remove the dump the debug results for the query show:
          Debugging Information
ColdFusion Server Enterprise
8,0,1,195765
Template
/Assets/Import/index.cfm
Time Stamp
19-Jul-10 02:19 PM
Locale
English (US)
User Agent
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.4) Gecko/20100611 Firefox/3.6.4 ( .NET CLR 3.5.30729)
Remote IP
192.168.1.100
Host Name
192.168.1.100
Execution Time
Total Time
Avg Time
Count
Template
5 ms
5 ms
1
/data/vhome/xxxl/httpdocs/Assets/Import/index.cfm
3324 ms
STARTUP, PARSING, COMPILING, LOADING, & SHUTDOWN
3329 ms
TOTAL EXECUTION TIME
red = over 250 ms average execution time
SQL Queries qry (Datasource=dsn, Time=1ms, Records=0) in /data/vhome/xxx/httpdocs/Assets/Import/index.cfm @ 14:19:19.019
     update DISC_CUST set DISC_PriceChange = '222222', DISC_TaxablePriceChange = '2222222'
     where DISC_ProdID = '1129'

How can I tell this FM to update the buffer before reading data??

Hi All,
I have developed a Web Dynpro Application that calls a FM.
Values are written into the database (I use a standard FM for that).
After that, values a read from the database to be show in the Web Dynpro Application again (Again, using a standard FM).
However, the data is not being updated, that is, the data delivered by the function module is not the updated, new data, but the old data.
If I select the data using simple select statements, ist is provided correctly (new data). That means the database already has the correct data, but the FM uses some sort of buffer which does not seem to be up to date at this point in time...
How can I tell the FM to update is buffers before being acually executed?
The function module in question is called HRIQ_ACAD_READ_TIMELIMITS, but I don't think this information is required to answer my question.
THANKS, Johannes

aye, thats ecaxtly what i meant.
Displaying the data in a new process. i know this is not what you finally want, but if the data is correct in your new process we might get better ideas what is causing your buffer problems.
BTW is your system scaled? do you have more than one application server and may this be a synchronisation error?

HT204266 how can you tell if an app update is free?

I constantly get app updates, it seems as if I am be charged for them, how can you tell if an app update is free?

I have never been charged for an app update. Which apps are you being charged to update? There should be no charge for an update.
If you upgrade the app from a lite version to a full version, there will be a charge for that.

HT4972 how do I tell the ipod which computer I normally use? All of the computers i normally use to sync with tell me to use the computer I normally sync with?

how do I tell the ipod which computer I normally use? All of the computers i normally use to sync with tell me to use the computer I normally sync with?

Then those are not the syncing computers. You can manage music among different computers.
What computer did you setup your iPod on and do updates on/?That is usually the syncing computer.

How can you tell what pictures from iPhoto you already used in iMovie?

how can you tell what pictures from iPhoto you already used in iMovie?

Log into your account on a computer (iTunes>Store>View Account) and go to Purchase History

How to place a break-point in update rules

Hi All,
Can any one let me know how to place a break-point in update rules. I used the hard code BREAK-POINT in the code, but it did not work out. After placing the BREAK-POINT in the update rules code, I executed the info package and the load was successful. In order to go into the debug screen can any one let me know the procedure.
Regards,

Hi,
In the monitor screen goto "details" tab and under the "Processing" select the option "Data Package 1" and right click over that you can find an option simulate update.
In that select the option "Activate Debugging in Update rules" and select "Perform Simulation".
You can search for your code using the option ctrl+F and double click the code over there.
now the breakpoint is set.
Hopr this helps.
Regards,
K.Manikandan

How can I tell if I can update to OS X 10.7 lion?

I Am trying to upload turbotax. I Chet an error that I need to update to OS X 10.7 Lion. How can I tell if my current macBook is compatible? Can I even upload that? I would like to know before I purchase it.

The information required is in the first window that opens

How to locate inactive transfer reules and update rules

Hi SAP Gurus,
could some one tell me how to locate all the <b>INACTIVE</b> transfer reules and update rules in our system? i <b>DONT</b> want to so the mass activation of transfer/update rules. I just want to locate all the inactivate transfer/upfate rules.
ur help will be appriciated in terms of points..
manmit

Hi,
Inactive UR can be seen by RSA1->Infoprovider->Settigns(menu bar)->Select Display Options->only display restrictions->All inactive objects...
It will show inactive infoproviders along with inactive update rules.
Similarly inactive infosorce/TR can be seen by RSA1->Infosource->Settigns(menu bar)->Select Display Options->only display restrictions->All inactive objects...
Hope it helps.
Regards,
Aditya

How to add a new char in Update rule

Hi Gurus:
I copied update rules from an old cube. This new cube is a copy of old cube - almost.
One of the char is missing in the new cube when compared to old cube. There is a small update routine for that char which I need to introduce to new cube.
My problem is, I'm not able to figure out how to add the new char in the update rule & start the mapping process..
Thanks & Regards

Dear Bhanu: This is what happened.
When I copied - it defaulted this char with what present in comm structure. Basically the old cube has a routine for this char...
And the position of this char in the update rule for chars..got realigned.
I'm sorry - I should have check it properly.
Thanks a LOT for your time & input...I will assign the points
Best Regards

How do we track that a particular VARIABLE is beign used in

Hi all
How do we track that a particular VARIABLE created by, last change by,alias if any in order to track variable uses.

It is difficult to trace the usage of variable for particular.
The below tables provides information to extent.
RSZELTXREF Directory of query element references
RSZGLOBV Global Variables in Reporting
Edited by: raghuram alamuri on May 18, 2011 3:26 PM

How to look up master data in update rule

Hi Friends,
I want to Fill a characteristic of an info cube using the attribute value in a master data in Update rule.
Eg: I want to fill a field in cube 0PM_C01 that is got from Master data 0PM_ORDER. I have to do this in upate rule. Can anyone help me.
Joe

Eugene, Atlaj
Your answers were very useful.
Eugene as you said,
I read the link you mentioned and I can use code
like this
DATA: mat LIKE /BI0/PMATERIAL-MATERIAL.
SELECT SINGLE MATERIAL FROM /BI0/PMATERIAL INTO mat
WHERE EANUPC = COMM_STRUCTURE-EANUPC AND OBJVERS = 'A'.
IF SY-SUBRC = 0.
RESULT = mat.
RETURNCODE = 0.
ELSE.
RETURNCODE = 8.
ENDIF.
But for each record of comm structure the selection quer y will touch the Data base. As Atlaj said, can I fill the internal table in the start routine and look it up in the update rules. I think the performance willbe increased. Could you give me code sample or link?
Thanks in ADV
Joe

How can I tell where my CC licenses are being used?

I own several CC-for-teams seats, but they are activated and deactivated on many computers constantly.
How can I keep track of what licenses are in use on my computers? Are the MAC addresses or hostnames stored someplace?
If I need to retreive a license, must I do so by user (email address), or can I revoke a license from a machine instead?
For that matter, does Adobe offer per-machine or concurrent licensing as an alternative to CC-for-teams? How do Enterprise users manage?
Thanks,
Yet-another-CC-user

Hi DEQRTWDWYQD,
The CC is based on Adobe ID.Each CC Adobe Id entitles you for two installs, so the moment it is tried to be installed on the third computer, it gives you a prompt to deactivate from the previous machines..
If you want to retreive a license, you have to revoke the invite from the Admin console by clicking on the cross in front of the Email Adress.
As of now the enterprise users manage by deploying packages from the creative Cloud Packager.
This link can used for reference:
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/packager.html
http://helpx.adobe.com/creative-cloud/packager/creative-cloud-packager-faq.html
Regards,
Rajshree

How to determine InfoCube name within the update rule start routine?

We are attempting to delete all the records where all key figure values are zeroes. We have about 15% of such records and we really don't need them.
We have yearly InfoCubes. We copy the InfoCube and update rules at the end of every year. So, we don't want to hard code any field names within the update rules.
If I could determine the target InfoCube name within the update rule start routine, I can find out all the key figures dynamically. But, I don't see a way of finding out the InfoCube name.
If you would share any ideas, I would really appreciate.
Thanks.
Sudhi Karkada.

Hi Sudhi,
I dont know if this is what you are looking for.
if you want to delete a record from being inserted when all the Key figure values are ZERO then you can use a Update Routine for some characteristic in the below way
If looking for the InfoCube:
if COMM_STRUCTURE-KF1 = 0 and COMM_STRUCTURE-KF2 AND....
RETURNCODE = 4.
else
RESULT = COMM_STRUCTURE-ChanracteristicObject.
endif.
If it is to an ODS / InfoCube in the start routine.
DELETE DATAPACKAGE where KF1=0 and kf2=0 and .....
Hope it helps.
Regards,
Praveen.
ENDLOOP.
Message was edited by: Praveen

Error in Update Rule migration using "Create Transformation"

Hi gurus,
We are encountering errors in the migration of our 2LIS_03_BF and 2LIS_03_BX update rules into a transformation via URs Context Menu Additional functions - > Create transformation
This action creates a new transformation, but is only generating very little Routine assignements in our KF fields. That is, some KF have their old ABAP converted automatically into ABAP OO while the rest (majority) of KF fields have no rule (routine) assigned at all.
However, the most surprising thing is that after executing the "Create Transformation", the log shows everything correct and warnings (message 652 "Routine created. Verify sintax").
Have you ever faced this problem?
Is the automatic migration tool working correctly?
If not, do we need to manually create all those KF routines that have not been correctly been migrated? Even after two years since new dataflow that was released?
We are on SP 15...
Thanks and best regards,
Enric

Hi Juanjo,
In fact, if I understand you correctly, I'm facing the same situation: all FORMS based on OLD individual KFs routine are now available in the global transformation routine in ABAP OO, but what I'm missing is the individual source to target KF field mapping to routine, where the method with the perform to each coding should be done.
Shall I understand this is a common bug? Manual correction proposed?
Thanks,
Enric

How do I tell if a particular update rule is used

Similar Messages

Maybe you are looking for