Tables req: Actual and planned values

Hello Experts,
I would like to create a new zprogram, which will give me output.
Cost element- planned values- actual values-. Day1 actual cost -day2 actual costu2026day31 actual cost.
Can any one tell me in which tables the planned(KP06) and actual data will be stored?

Hi,
Actual and plan values on line item level are stored in COEP. COSP is the table for totals (again for both actual and plan). You distinguish between the two by 'Value type' field.
Regards,
Eli

Similar Messages

Actual and Plan Versions annual view - Multiple versions per company code

Good Day,
Iu2019m creating an FI-CO query with an annual view of both Actuals and Plan Values, which uses period and version as input values. The dilemma is around the plan versions which are hardcoded per company codes (eg. 1 Company Code = versions 501 u2013 512)
Can anyone suggest a possible solutions as normally there is only one version used for planning but in this instance there are multiple versions per Company Code.
Currently the report is hardcoded for one Company Code and going forward it should cater for more than one(Company Company* 12 Version)
Kind Regards

Remove restriction on comp code. There could be 2 models.
1. Include comp code, value type and version in the rows. This way you get multiple records for a comp code. One record for actual data and one record each for plan versions. To have this model at the query, the data model in the cube also should be in this way (what we call as the account model), multiple records differentiated into actual/plan by valuetype and different versions by version.
2. Include comp code in rows. Create selections, one for actuals (restrict with key fig and value type 10, actuals), one for each plan versions (restrict key fig with value type 20, version 501. Create one selection for each version this way). This way we have one record per comp code with diff key fig for actual and plan versions. We call this as key fig model. To have this model at the query, the data model in the cube could be account model or key fig model. If it is key fig model then no need of selections. The key fig could be taken directly from the cube.

Actual and Plan Reporting

Hey guys,
as I am familiar with the Query Designer, I'm looking for a way, to select dimension members on rows. Anyway, I don't now how to achieve the following selections:
ACTUAL / APR.2008 -- ACTUAL / MAY.2008 -- ACTUAL / JUN.2008 -- PLAN / JUL.2009 -- PLAN / AUG.2009 -- PLAN / SEP.2009 --
I don't know how to achieve. I can select mimbers 2008 and 2009, and ACTUAL and PLAN...but then the cartesian product is shown.
How to achieve the above mentioned structure?
So far...
Christian

Christian,
   If this is a static report...in the sense that, you do not want to have your plan and actual categories to move with time...i.e next month in Aug , you do not want your actual till july and rest as plan....
this shld be achievable by hard coding the values of your categories...
1)when you open your evdre ..and click on the column headings plan/actual..you see a EVCVW() formula...telling you tht it is being pulled from current view....delete that formula and hard code the value to Actual/plan... and make your colkeyrange NOEXPAND.
But if the above situation is not your case, and you need a rolling forecast scenario...then one of the ways to achieve this is with excel functionality... as previously pointed by subramaniam.... you have to   use the now () functionality to get the month and year and concatenate these (TEXT(NOW(),"mmm") " "YEAR(NOW()))...
and based on the current month you have to define the categories Actual and plans and these have to be maintained   in your excel...and once you have your column headers right and have the colkeyexpansion locked with noexpand....you shld be set...
hope this helps...
Edited by: Vishal Mahawadhi on Jul 7, 2009 10:11 AM

CO- Actual and Plan data

Hi gurus,
I am creating a query with actual and plan column and restricting each column with the value type object of actual and plan respectively,but the plan data is not been shown in the columns.
I checked the value type master data and it has the plan and actual inside but when I am trying to restrict with the value type object, it only gives me the actual option and I have to force the plan option to restrict for the plan column.Don't know why it is not showing, cos I am showing it in the master data object for value type.Any help?
Thanks in advance

Hi Ravi,
Thanks for ur quick answer. I already tried that and the problem I have is that no data is coming for the plan column. I checked the Value type master data infoobject and saw both 10 and 20 in there,but when I am trying to restrict with the value type 20 in the query, it does not give me the 20 option.
I also checked the extractor in R/3 and could only see data for value type 10 and not 20, cos am using the datasource 0CO_OM_CCA9.Does that mean my datasource is not extraction data for value type 20 or how can I check for that?
Thanks

Joining Actuals and Planned Work from Project Server

Hi,
I have an SQL based query which returns Actuals and Planned work from Project Server; however a number of records (generally generic resources based on the ResourceIsGeneric column) are excluded. I believe this is because my Actuals query does not return
generic resources as we are joining both sides of the query on ResourceUID. I have included a snippet below - is there a way to join Actuals and Planned work so I can return all Resource data?
Thanks
SELECT tl.ResourceUID
,tl.ProjectUID
,tl.ResourceName AS [ResourceName]
,CASE
WHEN tl.ProjectName = 'Administrative'
THEN tl.TaskName
ELSE tl.ProjectName
END ProjectName
,ruv.RBS AS [RBS]
,Sum(ta.ActualWorkBillable) ActualWorkBillable
,Sum(ta.ActualWorkNonBillable) ActualWorkNonBillable
,Sum(ta.ActualOvertimeWorkBillable) ActualOvertimeWorkBillable
,Sum(ta.ActualOvertimeWorkNonBillable) ActualOvertimeWorkNonBillable
,CASE
WHEN Sum(ta.ActualOvertimeWorkBillable) > 0
THEN Sum(ta.ActualOvertimeWorkBillable)
END [HOURS]
,DATEPART(year, ta.TimeByDay) AS [Year]
,DATEPART(month, ta.TimeByDay) AS [Month]
,DATENAME(month, DATEADD(month, DATEPART(month, ta.TimeByDay), - 1)) AS [MonthName]
,puv.[Project Status] AS [ProjectStatus]
,ruv.[Primary Role] AS [PrimaryRole]
,ruv.[Resource Department] AS [Department]
,ruv.ResourceIsGeneric
,ruv.[Cost Category] AS [ResourceType]
,puv.[SAP Project Code] AS [SAPProjectCode]
,CASE
WHEN tl.ProjectName <> 'Administrative'
THEN NULL
ELSE tl.TaskName
END TaskName
,puv.[Project Plan Type] AS [ProjectPlanType]
,puv.[GEM Project Manager] AS [GemPM]
,ruv.[Rate Code] AS [RateCode]
,ruv.[Cost Centre] AS [CostCentre]
,ept.EnterpriseProjectTypeName AS [EPT]
,puv.[I DO Phase]
,puv.ProjectOwnerName AS [ProjectOwner]
FROM dbo.MSP_TimesheetActual_OlapView ta
INNER JOIN dbo.MSP_TimesheetLine_UserView tl
ON ta.TimesheetLineUID = tl.TimesheetLineUID
INNER JOIN dbo.MSP_EpmResource_UserView ruv
ON ruv.ResourceUID = tl.ResourceUID
LEFT JOIN dbo.MSP_EpmProject_UserView puv
ON puv.ProjectUID = tl.ProjectUID
LEFT JOIN dbo.MSP_EpmEnterpriseProjectType ept
ON ept.EnterpriseProjectTypeUID = puv.EnterpriseProjectTypeUID
WHERE ta.TimeByDay >= @xDate1
AND ta.TimeByDay < @xDate2
AND tl.TimesheetStatus IN (
SELECT ParamValues
FROM @ParamTable
AND ta.ActualWorkBillable > 0
GROUP BY ...
) TimesheetActual
FULL JOIN (
SELECT ruv.ResourceUID
,puv.ProjectUID
,ruv.ResourceName
,puv.projectname AS ProjectName
,ruv.RBS AS [RBS]
,Sum(abduv.AssignmentWork) AS [PlannedWork]
,DATEPART(year, abduv.TimeByDay) AS [Year]
,DATEPART(month, abduv.TimeByDay) AS [Month]
,DATENAME(month, DATEADD(month, DATEPART(month, abduv.TimeByDay), - 1)) AS [MonthName]
,ruv.ResourceIsGeneric
,puv.[Project Status] AS [ProjectStatus]
FROM dbo.MSP_EpmResource_UserView ruv
INNER JOIN dbo.MSP_EpmAssignment_UserView auv
INNER JOIN dbo.MSP_EpmAssignmentByDay_UserView abduv
ON auv.AssignmentUID = abduv.AssignmentUID
AND auv.ProjectUID = abduv.ProjectUID
ON ruv.ResourceUID = auv.ResourceUID INNER JOIN dbo.MSP_EpmProject_UserView puv
ON auv.ProjectUID = puv.ProjectUID
AND abduv.ProjectUID = puv.ProjectUID INNER JOIN dbo.MSP_TimeByDay_OlapView tbdov
ON abduv.TimeByDay = tbdov.TimeByDay WHERE abduv.TimeByDay >= @xDate1
AND abduv.TimeByDay < @xDate2
AND ruv.ResourceName <> 'Unassigned Resource'
AND ruv.ResourceName IS NOT NULL
AND abduv.AssignmentWork > 0
GROUP BY ruv.ResourceUID
,puv.ProjectUID
,ruv.ResourceName
,puv.projectname
,ruv.RBS
,DATEPART(year, abduv.TimeByDay)
,DATEPART(month, abduv.TimeByDay)
,ruv.ResourceIsGeneric
,puv.[Project Status]
) TimesheetPlanned
ON TimesheetActual.ResourceUID = TimesheetPlanned.ResourceUID
AND TimesheetActual.[Year] = TimesheetPlanned.[Year]
AND TimesheetActual.[MonthName] = TimesheetPlanned.[MonthName]

Hi,
you pasted just part of your query, e.g. is declaration of @ParamTable missing. Without complete query, it is difficult to see, what you are trying to do.
Could you please provide complete query?
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

Actual and Commitments values are not Appearing in Internal order report

Hi
We have done budget in KO22 for Internal Order and active the availability controle after that we made PO with the same IO and with account assignment category 'A' and GR also happened.
So when we run the report (S_ALR_87013019 - List: Budget/Actual/Commitments ), system is not showing Actual and Commitments values...
Please help me in this regard...
Thanks,
Saisri

Hi,
Here we are giving internal order in PO with account assignment category 'A'
In case of Account assignment category 'K' it is showing the Actual values in Report.
Why is it showing Actal /commitment values incase of 'K' ?
Why it is not showing when we select the 'A' category ?
Please provide me answer about my queries...plz
Thanks,
Saisri

Rolling forecase for Actual and Plan

Hi
Iam working on Rolling Forecast for Actual and Plan report.. My Planning here is Quaterly based so for example say we plan it on April so the months after april (May - Dec) would be Planning. So when my month keeps on moving the forecase also moves..
So can you please guys help me to get out of this with an solution..
Thanks

Hi,
If you are using BI-IP for your scenario of forecasting then you can refer to the below links for forecatsing strategies.
http://help.sap.com/saphelp_nw70/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
for forecasting strategies
http://help.sap.com/saphelp_nw70/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
If you are using SEM-BPS you can consult these links:
http://help.sap.com/saphelp_sem60ep1/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm
http://help.sap.com/saphelp_sem60ep1/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm
Forecast (old)
http://help.sap.com/saphelp_sem60ep1/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm
Forecast(Exit)
http://help.sap.com/saphelp_sem60ep1/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm
Regards,
Priyanka Singh

APC Value and Plan Value for an Asset.

HI Gurus,
I am developing a report where I have to display the APC value and Plan value of an Asset.Can anyone pls give an insight how to find this for the Asset.

Hi,
why don´t you use the logical database ADA which most of the FI-AA standard reports do? The logical database is a service to get this information without developing all the READ information and translation by yourself, especially when talking about mid-year-reporting, consistence checks, etc..
If you decide to use ADA, then the events GET ANLA0, GET ANLAV and GET ANLCV are from interest for you for information about APC and planned/posted depreciation value.
Regards,
Markus

PWA 2010 timesheet: 2 different colors for the rows "Actual " and "Planned

Hello,
To make timesheet easier to read and fill, is it possible to have 2 different colors for the rows “Actual “ and “Planned”?
Thanks,
soudha

Hello Soudha,
By default the timesheet grid shows the cells in white color. But if you have little coding skills or a developer at your end, you can try this using "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\JsGrid.js" java
script file.
You may have to modify it but I recommend to take a backup of the file and test in your test environment first.
Happy troubleshooting.....
Vikram Daruru - MSFT

Actual and Plan Versions

Hi,
I was wondering if someone could give me a general overview of actual and plan versions.
Points will be awarded generously.
Thanks,
Deki

Versions are nothing but scenarios.
There can be only one Actual, so only one version is available for Actual i.e 0
But the comapny can have different plans on the basis of various business scenarios for example, if they acheive 80% capacity utilisation or achieve break even etc for flexible reporting. This will help easy comparison at the period end.
Hope you are now clear about the versions.
Thanks
Siva

Need to display different colors for Actuals and forecasting values in WAD

Hi Gurus,
My requirement in the report is, I need to display different colors for particular values like Actuals(say value type 10) and for forecasting values(say value type 20) , and data will uploaded from flat file.
Scenario : If I upload the data for March Month, I receive actual values upto March(Jan to March month) and from April to Dec(Forecast values with value type 20), Every month I will be getting file and similarly for subsequent months, i will get current month actual values and forwarding months forecasting values,
Now , my requirement is, When ever i execute the Report, Say if i execute for April Month, Upto April( Jan to April for actual values should be displayed in one color) and from May to Dec ( forecast values should be displayed in different color).
I had tried with following options like exceptions and could not display , as it runs based on key figure values where as my requiremnet is based on the CALMONTH , i need to show different colors for both actual and forecast values.
Kindly, help me out from this,
Thanks

Hi,
it is not necesseary that you need to do that in WAD , you can do the same in BEx platform, Since WAD is build above the bex reports. so automatially any changes done in Report will be replicated in WAD
Go for Exceptions in Bex. Give some range for Actuals and Forcasting at the creation of the exception.
if you do those changes in BEX automatically it will replicate in the WAD.
for more information please read this link
http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
hope this will solve your problem.
Santosh

Can we use actual and plan data for same cube?

hi friends,
can we use actual data and plan data in same cube in bps.
Thanking u
suneel.

Hi,
Let us take std cube 0SD_C03 where we store billing info,sales order info and delivery info. But still in reporting we can get values without any mismatch in their respective KF. It is possible because of a cahracterstic called Documnet category which gets values in update rule by constant .
Similarly we can have 2 types of data (plan and actual) in a single cube by having different value for a characterstic. Most frequently used characterstics for this are 0VERSION and Value type.
With rgds,
Anil Kumar Sharma .P

Field validation in table maintenance generator and input value grey out.

i have created ztable with 3 fields as em_no,em_no and addrnumber.
first two fields are custom fields but the third custom field need to validate the standard table adrc contains the value of the field addrnumber.
i need the query of field validation query which we write in create entry events in table maintenance generator and also if we give wrong value for addrnumber in sm30 maintain table, the input field need not to be grey out for next entry...
please help.

Hi,
create method -
>before saving data.....write the logic between the method
go to utilities->table maintanance ,,,after creating generator ---go to envirnment->modification->events.
create event -.>.as zsave select event type 1(before saving data to table) write code in include....
consider data for field3 is 10 .
lv_new = ztbr(table name)-field3.
select field3 from ADRC(ZTABLE) into wa_new (TYPE ZTABLE) where field3 = lv_new.
if sy-subrc = 0.
     working fine
     else.
    message i888(sabapdocu) with 'data invalid'.
endform.
This will help u...
Thank u.........

WBS element and Plan value

All,
How can i fetch PLAN values for WBS element.
Any function module or tables related to this
a®

Sorry about not giving much details in the first thread
Requirment is fetch all field content (records) WOG001 WOG002 upto WOG016 related to WBS element.
I think WOG001 - WOG016 represent the plan details ?
a®

Report for extracting the actual and planned cost from service orders

HI all
we are creating a report in BI for Module - Customer service . LIke , the report is all about how many complaints created in the system and how many completed technically and what is the cost involved for each complaint .
Like we want the comparision between the planned cost and the actual cost .
Now to give the logic to the BI Team for planned cost and actual cost , please suggest the flow of logic or table flow to arrive the planned and actual cost
thanks in advance

Hi Marthand,
I am not sure which datasource your are using. In this case, you can use the 0VALUETYPE to differencitae between th eplan and actuals. Normally Plan which is budget will have value 050 and for actuals will have 010. For costs, you will have one key figure and at the reporting level, you will have the costs restricted by the value type for plan and actual to make comparisons.
Hope this helps.
Regards,
Srinivas

Tables req: Actual and planned values

Similar Messages

Maybe you are looking for