How do I tell if a radio button is selected?
Apart from relying on the radiohandler, is there any direct command or code which i can use to immediately check if a particular radio button is selected or not?
Like in Visual Basic, we can immediate state if (radiobutton.value = false)
is there any equivalent to this in java?
The radio button inherits from abstractButton class.
I believe in the abstractButton has isSelected method.
You can use this to get the state of the button.
Similar Messages
-
How to handle Event when a radio button in selection screen is clicked
Hi all,
What is the Event generated when a radio button is clicked in the selection Screen. My requirement is .If one radio button is clicked a field in selection screen should be greyed.
Here I used AT SELECTION-SCREEN OUTPUT. but this event is generated only if i press 'ENTER' after clicking the radio button in the selection screen.
Is there any other way to process this radio button event?
Thanks&Best Regards,
Vishnuhi,
try like this
TABLES : kna1,lfa1.
SELECTION-SCREEN:BEGIN OF BLOCK blk1 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : rad_but1 RADIOBUTTON GROUP one DEFAULT 'X' USER-COMMAND ucom.
SELECTION-SCREEN COMMENT 3(26) text-003.
SELECT-OPTIONS : kunnr FOR kna1-kunnr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : rad_but2 RADIOBUTTON GROUP one .
SELECTION-SCREEN COMMENT 3(26) text-004.
SELECT-OPTIONS : lifnr FOR lfa1-lifnr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN:END OF BLOCK blk1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF rad_but1 = 'X'.
IF screen-name = 'KUNNR-LOW' OR screen-name = 'KUNNR-HIGH' .
screen-input = '1'.
MODIFY SCREEN.
ENDIF.
IF screen-name = 'LIFNR-LOW' OR screen-name = 'LIFNR-HIGH'.
screen-input = '0'.
REFRESH lifnr.
MODIFY SCREEN.
ENDIF.
ENDIF.
IF rad_but2 = 'X'.
IF screen-name = 'KUNNR-LOW' OR screen-name = 'KUNNR-HIGH'.
REFRESH kunnr.
screen-input = '0'.
MODIFY SCREEN.
ENDIF.
IF screen-name = 'LIFNR-LOW' OR screen-name = 'LIFNR-HIGH'.
screen-input = '1'.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
reward if usefull.... -
How do you grey out/disable fields under a radio button if another radio button is selected in Adobe Acrobat XI Pro?
I’m creating a form where the user has three options to make a payment.
1. charge to my credit card
2. charge associated costs to bank account
3. By cheque or money order
My Problem is, under each option, there are required fields that has to be filled out. So if the user picks the first option, charge to my credit card, they would fill out the required fields (credit card number, expiration date etc.). But when they click submit button to submit the form, it won’t let them, because there are required fields under the second option. Also, I have the radio buttons for the three options setup so that if the user holds the shift key and clicks a radio button, it unchecks it. So what I'm trying to do is this: If the user selects the radio button for option 1, the other two options are greyed out/disabled. And if the user holds down the shift key and clicks radio button for option one again, it unchecks the radio button and the other two options are available again. Is there a way to grey out or disable the two other payment options when the other one is picked. I’m assuming I will have to use javascript, but what would the coding be and which field do I write it under?
Thanks in advance guysYou will have to use custom JavaScript to access the various properties of the field object.
The radio button group has a value. When no button is selected that value is "Off". When an individual button has been selected the value for the group will be the option or export value for that individual button.
Once you have determined the button selected, then you will know the form fields that need to be made required. You use JavaScript to access those fields and change the "read only" property to false, and set the "required" property to true. For the fields associated with the other options, those fields should be reset, made read only, and have the "required" property set to false.
Disabling (graying-out) Form Fields
>> Also, I have the radio buttons for the three options setup so that if the user holds the shift key and clicks a radio button, it unchecks it.
Radio button in a PDF do not work that way. Only check boxes can be unchecked by clicking on one that has been checked.
If you plan the coding for the Mouse UP action to test for all possible options and code for each of those options you should have what you want.
If you want actual code you need to provide a lot more details.
It is even possible to perform some credit card and bank routing number validations with JavaScript and some check digit formulas. -
How do you grey out a radio button if a text field is blank in Adobe Acrobat XI Pro?
How do you grey out a radio button if a text field is blank in Adobe Acrobat XI Pro?
So this what I'm trying to do:
( ) |TEXT FIELD|
( ) |TEXT FIELD|
( ) | |
( ) |TEXT FIELD|
I have a radio button: ( )
and a text field: |TEXT FIELD|
The third text field is blank, and I would like for the radio button next to it greyed out (user can't click on it) since the text field is blank. Is this possible to achieve? I'm assuming I'll have to use javascript, but what would the code be and would it be entered in the javascript editor for the text field or the radio button?
Thanks in advance guysHey, thanks, but it didn't work
I have the text fields as read only. Could that be why it's not working? Should I make the fields not read only?
Thanks, -
How can i declare a single radio button field in selection-screen ?
How can i declare a single radio button field in selection-screen ?
>
Rob Burbank wrote:
> And how will you turn it off once it is turned on??
>
> Rob
Thats correct ;)...See ravi if users will ask so many things its our Job to convay the correct solution ....
Just post your org requirement..SOo some body guide you better//
Sas -
How to get dispaly value of radio button
hi i have situation where i what to get display value of radio button,for example i store value A in db but i display Active in my radio button how can i do that
my radio button is
<af:selectOneRadio id="sor3" layout="horizontal"
value="#{pageFlowScope.InternalBean.status}"
autoSubmit="true"
valueChangeListener="#{RadiobuttonPopupBean.activationChangedListener}">
<af:selectItem label="Active" value="A" id="si10"/>
<af:selectItem label="Inactive" value="I" id="si9"/>
</af:selectOneRadio>
i what to display the value in this outputtext
<af:outputText value="Reason: #{bindings.Reason.inputValue}" id="ot9"
partialTriggers="d1" inlineStyle="height:100px;"/>
am in jdeveloper 11.1.1.6.0adf009, the answer was given in my blog I posted to your other thraed JDeveloper: Showing a Popup when Selecting an af:selectOneRadio | JDev &amp; ADF Goodies
You only have to read it and the link provided inside the blog pointing to the other blog entry.
use
<af:outputText value="Reason: #{pageFlowScope.InternalBean.status}" id="ot9"
partialTriggers="d1" inlineStyle="height:100px;"/>
to output the text.
By the way your code snipplet isn't understandable without knowing the context around it. You always should mention if you post code from someone else (at least give a link to the source).
Timo -
How to put Check Boxes and Radio button in Smartforms
Hi all,
How to put check Box and radio button in Smartforms ............ from web properties there is an option to use. But How to use.
regards,
Mohsinu can declare the checkboxes or radiobuttons whatever in driver program and pass the same to ur form...
-
How to Use Spry to Validate Radio button
How to use Spry Validation for radio button?
The samples only have checkbox, text, select and textarea.
ThanksI needed to add radio buttons to the live (non-destructive)
filter so users could choose which column they wanted to search
data from. Its been modified from the "contains CB" but works
nicely. It also had to rebuild table when another button was
selected. I'll post some code if anyone would like to use it....
The Form area -
<form name="filterform">
Data Filter: <input type="text" id="filterTF"
onkeyup="StartFilterTimer();" />
<input type="radio" id="containsCB" name="radio"
value="module" onclick="resetfilter();" checked /> by Module
<input type="radio" id="containsCB" name="radio"
value="oper" onclick="resetfilter();" /> by Oper
<input type="radio" id="containsCB" name="radio"
value="phone" onclick="resetfilter();" /> by Phone
<div id="radiovalue"></div>
</form>
The JS area -
function FilterData()
var tf = document.getElementById("filterTF");
for (var c=0; c < document.filterform.length; c++)
if (document.filterform[c].checked)
var choice = document.filterform[c].value;
if (!tf.value)
// If the text field is empty, remove any filter
// that is set on the data set.
dsRows.filter(null);
return;
// Set a filter on the data set that matches any row
// that begins with the string in the text field.
var regExpStr = tf.value;
regExpStr = "^" + regExpStr;
var regExp = new RegExp(regExpStr, "i");
var filterFunc = function(ds, row, rowNumber)
var str = row[choice];
if (str && str.search(regExp) != -1)
return row;
return null;
dsRows.filter(filterFunc);
function StartFilterTimer()
if (StartFilterTimer.timerID)
clearTimeout(StartFilterTimer.timerID);
StartFilterTimer.timerID = setTimeout(function() {
StartFilterTimer.timerID = null; FilterData(); }, 400);
function resetfilter() {
// var tf = document.getElementById("filterTF");
// var tfval = tf.value;
document.getElementById("filterTF").value = "";
StartFilterTimer(); -
How can I make a check box hidden (invisible) if a radio button is selected?
I am using Adobe Acrobat X Standard, and I can't seem to find a JavaScript that will do what I want.
I need one check box to be invisible or hidden if a certain radio button is selected.
Ex: if a user selects "yes" from the radio button list, I need one of 2 check boxes lower on the form to be invisible/hidden/non-selectable.
Can someone please help me?Does this have something to do with a "field dependency" setting within Acrobat itself?
I am so confused at this point, I don't even know where to look anymore. -
How to disable when one radio button is selected
Hi Folks,
One of our requirement is as follows,
Scenario: We have two columns with radio buttons and two dropdown box for the same columns to select the values.
Requirement: When user select one radio button then the other radio button and its relevant dropdown both is disabled.
Radio Buttons:
Company
EmpNo
Dropdown Box:
Company
EmpNo
If CompName Radio button is selected then Radio Buttom and Dropdown Box for Policy Id is disabled.
Finally, The filter is applied on CompName to populate the values in dropdown
Thanks Guys,
KKlook for a function like setActive or setDisable
-
Agent ready Radio button remains selected even though agent is on call.
Hi
issue
Agent logsin to Interacton center and system by default puts him in to NOT Ready Status.
Agent changes the status from Not ready to Ready.
Agent receives a call via queue
Agent accepts call via interaction center
Ready Radio button reamins selected even though customer care agent is on phone with Customer.
In idle situation the radio button should move from ready to not ready or any other state.
Landscape : SAP CRM / AMC MCIS / CISCO IPCC.
we did our system restarts still issue is not resolved.
Has anyone ever noticed this issue.
any Help or guidnace is really appreciated. Thanks in advance
RegardsHi Alok,
That behavior may be just how your CMS and Telephony system behaves. In all likelihood you are not going to get a queued call at that point, since you already are on a queued call. As long as the state display is correct once the call is ended, that is the most important thing. I have seen some telephony systems where even the hard phone shows ready during the call, and doesn't change modes until after the call is ended. Anyway, you should check with your CMS vendor - in this case AMC MCIS.
Sincerely,
Glenn
Glenn Abel
Covington Creative
www.covingtoncreative.com -
Radio button and select option in one line
Hi,
I have an requirement in which i need to display the radio button and select option in one line in an report program.
How can i do it?
Regards,
Arun.Hi,
Try this code.
TABLES: bkpf.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: p_r1 RADIOBUTTON GROUP a.
SELECTION-SCREEN COMMENT 4(20) text-001 FOR FIELD p_r1.
SELECTION-SCREEN COMMENT 30(12) text-002 FOR FIELD p_date.
SELECTION-SCREEN POSITION 39.
SELECT-OPTIONS: p_date FOR bkpf-budat OBLIGATORY.
SELECTION-SCREEN END OF LINE.
PARAMETERS: p_r2 RADIOBUTTON GROUP a.
text-001 = " Radio button"
text-002 = "Posting date" -
Radio Buttons on Selection Screen
Hi,
I have four radio buttons on selection screen in a frame, all belonging to the same group.
When the program is called using transaction 1, first two radio buttons are displayed. When the program is called using transaction 2, bottom two radio must be displayed.
I am doing this using the following code.
The problem is : When last two are displayed, there is empty space left on the top and first two are displayed there is empty space left in the bottom of the frame. How can this be taken care of such there are no empty spaces in the box frame?
Code:
Radio Buttons for Table Name
SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-005.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_ot RADIOBUTTON GROUP grp1 MODIF ID one.
SELECTION-SCREEN COMMENT 5(31) text-001 FOR FIELD p_ot.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_exp RADIOBUTTON GROUP grp1 MODIF ID one.
SELECTION-SCREEN COMMENT 5(31) text-002 FOR FIELD p_exp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_cost RADIOBUTTON GROUP grp1 MODIF ID two.
SELECTION-SCREEN COMMENT 5(31) text-003 FOR FIELD p_cost.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_att RADIOBUTTON GROUP grp1 MODIF ID two.
SELECTION-SCREEN COMMENT 5(31) text-004 FOR FIELD p_att.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK bl1.
Initialization
INITIALIZATION.
Display Table Names depending on transaction calling the program
PERFORM display_table_names.
FORM display_table_names.
DATA : l_mod_id(3) TYPE c.
IF sy-tcode EQ 'ZVTEST1'.
l_mod_id = 'ONE'.
ELSEIF sy-tcode EQ 'ZVTEST2'.
l_mod_id = 'TWO'.
ENDIF.
LOOP AT SCREEN.
IF screen-group1 EQ l_mod_id.
screen-invisible = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDFORM. " display_table_namesHi,
REPORT Z_SALES MESSAGE-ID ZZ .
* Variables *
DATA: IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_MSGS LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA: V_FILE TYPE STRING.
* Internal Tables *
DATA: BEGIN OF IT_SALES OCCURS 0,
AUART,
VKORG,
VTWEG,
BSTKD,
KUNNR_KUNAG,
KUNNR_KUNWE,
KETDAT,
KPRGBZ,
PRSDT,
BSTKD_1,
KUNNR_KUNAG1,
KUNNR_KUNWE1,
KETDAT_1,
KPRGBZ_1,
PRSDT_1,
ZTERM_1,
INCO1,
INCO2,
MABNR,
KWMENG,
BSTKD_2,
KUNNR_KUNAG2,
KUNNR_KUNWE2,
KETDAT_2,
KPRGBZ_2,
PRSDT_2,
ZTERM_2,
INCO1_1,
INCO2_2,
KSCHL,
KBETR,
END OF IT_SALES.
* Selection-Screen *
*Selection Screen 1
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_FILE(25) TYPE C,
O_FILE(25) TYPE C.
SELECTION-SCREEN END OF BLOCK B1.
*Selection Screen 2
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
PARAMETERS: CAL_TRA RADIOBUTTON GROUP G1 USER-COMMAND FLAG,
SESSION RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK B2.
*Selection Screen 3
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-003.
PARAMETERS: MODE DEFAULT 'X' MODIF ID BL1,
UPDATE DEFAULT 'X' MODIF ID BL1.
SELECTION-SCREEN END OF BLOCK B3.
*Selection Screen 4
SELECTION-SCREEN BEGIN OF BLOCK B4 WITH FRAME TITLE TEXT-003.
PARAMETERS: SES_NAM(25) MODIF ID BL2,
KEP_TRAS TYPE C DEFAULT 'X' MODIF ID BL2,
LOC_DATE TYPE SY-DATUM MODIF ID BL2,
USER TYPE SY-UNAME DEFAULT SY-UNAME MODIF ID BL2.
SELECTION-SCREEN END OF BLOCK B4.
* At Selection-Screen Output *
AT SELECTION-SCREEN OUTPUT.
IF CAL_TRA = 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'BL1'.
SCREEN-ACTIVE = '1'.
ENDIF.
IF SCREEN-GROUP1 = 'BL2'.
SCREEN-ACTIVE = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
IF SESSION = 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'BL1'.
SCREEN-ACTIVE = '0'.
ENDIF.
IF SCREEN-GROUP1 = 'BL2'.
SCREEN-ACTIVE = '1'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
* At Selection-Screen *
AT SELECTION-SCREEN.
PERFORM VALIDATE_MANDATORY_FIELDS.
***************** INITIALIZATION ********************
INITIALIZATION.
LOC_DATE = SY-DATUM - 1.
* Start of Selection *
START-OF-SELECTION.
V_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = V_FILE
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ' '
TABLES
DATA_TAB = IT_SALES
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form VALIDATE_MANDATORY_FIELDS
* text
FORM VALIDATE_MANDATORY_FIELDS.
IF P_FILE IS INITIAL OR O_FILE IS INITIAL.
MESSAGE E000 WITH 'ENTER BOTH THE FILE NAMES'.
ENDIF.
IF CAL_TRA = 'X'.
IF MODE IS INITIAL OR UPDATE IS INITIAL.
MESSAGE E000 WITH 'ENTER BOTH THE OPTIONS'.
ENDIF.
IF SY-SUBRC <> 0.
IF MODE <> 'A' OR MODE <> 'E' OR MODE <> 'N'
OR MODE <> 'a' OR MODE <> 'e' OR MODE <> 'n'.
MESSAGE E000 WITH 'Mode should be either A, E or N'.
ENDIF.
IF UPDATE <> 'S' OR UPDATE <> 'A'
OR UPDATE <> 's' OR UPDATE <> 'a'.
MESSAGE E000 WITH 'Mode should be either S or A'.
ENDIF.
ENDIF.
ENDIF.
IF SESSION = 'x'.
IF SES_NAM IS INITIAL
OR KEP_TRAS IS INITIAL
OR LOC_DATE IS INITIAL
OR USER IS INITIAL.
MESSAGE E000 WITH 'ENTER ALL THE FIELDS'.
ENDIF.
ENDIF.
ENDFORM. "VALIDATE_MANDATORY_FIELDS
Regards
vijay -
Add radio button when a radio button is selected (pop up)
How do you Add a 2 radio buttons when (pop up when d1 is
selected)
For example d1a and d1b
When d1 is selected.
<cfoutput>
<cfif isdefined("url.msg")>
#urldecode(url.msg)# <BR />
</cfif>
</cfoutput>
<table border="0" cellpadding="5">
<form id="form1" name="form1" method="post"
action="index.cfm?action=actSearch">
<tr>
<td>please enter id no: </td>
<td><input type="text" name="nbr" /></td>
</tr>
<tr>
<td>B1: </td>
<td><input type="Radio" name="bd" value="b1"
checked="checked"></td>
</tr>
<tr>
<td>D1: </td>
<td><input type="Radio" name="bd"
value="d1r"></td>
</tr>
<tr>
<td></td>
<td><input type="submit" name="Submit"
value="Submit" /></td>
</tr>
</form>
</table>As you may already know, ColdFusion code runs on the server.
It's not sent out to the web browser. It sends out HTML to the
browser. And what you want to do here is regonize a change that
occurs in the web browser without submitting the form. The way you
can do this is AJAX. If you haven't already done so, check out the
ColdFusion / AJAX library here :
http://ajaxcfc.riaforge.org/.
This will give you a good framework of code to use to do this so
you won't have to reinvent the wheel. -
Radio button in selection screen and push button
Hi experts,
I want to give radio button in selection screen side by side.
how we can do this on slection screen.
secondly i want to resize push button on selection screen.
please provide me the exact solution.
thanks
babbalHi babbal,
For Your Requriment yo can go to tcode se51 & then give ur program name & give screen number as 1000 because 1000 is default screen for all the programs and in se51 Press Layout button & then you can make changes to the Selection screen according to your requriment
Hope it will be Helpfull.......!!
Thanks & Regards,
Bhushan
Maybe you are looking for
-
Strange error while filling setup tables for purchasing
hi experts, while filling setup tables, job is getting cancelled. when I check in sm37 message is Enter rate GBP / SGD rate type M for 03.08.2009 in the system settings Job cancelled after system exception ERROR_MESSAGE It is for only the 8th month o
-
How do I change the fps of a clip?
Hi, I'm working on an HD project with a sequence running at 23.98fps. Most of my clips are running at this speed except for a couple which are somehow running way too fast even though the audio is at the right speed. Is there a simple way I can chang
-
Frank, Steve still need help on this one
When I click a return I want all iterators cleared. However, it does not. Here are some ways I have tried that. SecMenuView1 is master and SecMenuView2 is the detail if that helps! Did not work AppMenuAppModule service = new AppMenuAppModuleImpl(); s
-
Hi All, I am beginner to Adobe forms. I am just doing a simple example for displaying a value on the form. But it is giving error "Adobe document services error: SOAP Runtime Exception: CSoapExceptionTransport". Thanks, Ravee
-
Developer Panel is Blank. How To Restore?
In Lightroom 3, the Developer panel is now blank. It used to display an array of tools. How can I restore these tools?