How do i turn off the compatibility mode on my ipod classic

how do i turn off the compatibility mode on my laptop, i cannot transfer music from the laptop to my ipod classic, it shows a warning massage that i shoud turn off the compatability mode.

Reset it: hold the Menu and center buttons down until it resets.
If that does not work you may just have to run the battery down.

Similar Messages

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

How do I turn off the compatibility mode for ITunes.

I have turned off the compatibility mode for Itues off so there is no tick in the box and yet, even after removing Itunes completely from the PC and reinstalling it, it automatically sets to run in an older version even if the compatibility button has not been ticked...!!!!
Can anyone suggest why this happens and how can i change it?

There were no boxes checked in the Compatibility mode tab for either iTunes.exe or QuickTimePlayer.exe and I was still having the issue. RandomBehavior's post was the solution. I’m not real computer savvy so it took me a while to figure out the process. Below is the solution for dummies. It did not require a restart but, I did one and everything was great. No more compatibility popup. :o)
Left Click on Windows Icon on Bottom Taskbar
Select: Help and Support
Search: regedit
Select: 1. Back up the registry
Choose: Click to open Registry Editor
Allow Changes
Open folders in this order
HKEYCURRENTUSER
Software
Microsoft
Windows NT
CurrentVersion
AppCompatFlags
Layers
Mouse over the file c:\Program Files…
c:\Program Files (x86)\iTunes\iTunes.exe
Delete this file: c:\Program Files…
which is c:\Program Files (x86)\iTunes\iTunes.exe

As a follow up from my recent question, I turned off the compatibility mode under all and regular, clicked out ok, ok then then went to itunes and played a song as they said to, and then tried to open the store and STILL CANNOT OPEN STORE, please Help!!!

Turning off the compatibility mode by deselecting the check box under each thing that it wants did nothing for my access to the itunes store, still a white page with "itunes store" in the middle of it. This is getting rediculous! Someone with computer smarts please help, I am at the end of my rope!

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

How can I turn off the volume limitor on my ipod nano? I want to play it with a docking station, it is no where near as loud as an old 4GB ipod!

Hello, please can you tell me how to turn off the volume limiotr on my ipod nano? I want to play it on a docking station and it just isn't as loud as I want it to be. An old ipod is much louder.

I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection. All this does is slow me down since I need to go back and hit those areas again. The big arrowhead just get's in the way. The original lasso tool with the thin line and small active point at it's lower left was far better for me.
I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down. If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
Is there any chance this option could be inlcuded in cursor preferences? I'd give much thanks, Adobe.

How can I turn off the sleep mode on my B209a

I need to turn the sleep mode off on my B209a printer,every time my computer updates and printer is in sleep mode , my computer does not reinstall printer.
usally its at a time where I need to print and I have to stop and reboot system with the printer on.

HI,
Go into the setup menu from the display of the unit and find prefferances. In there is the option called "energy save mode". You should be able to turn it off there.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

How do I turn off the Safe mode to allow add ons

I have fire fox in Safe Mode how can I turn this off so as to get add ons??? I cannot get add ons with fire fox in safe mode

See these articles. <br />
https://support.mozilla.com/en-US/kb/Safe+Mode <br />
https://support.mozilla.com/en-US/kb/Firefox+is+stuck+in+Safe+Mode

How do you turn off the fax mode after you have faxed

I SET UP MY PRINTER TO FAX TODAY AND NOW MY PHONE AND FAX ARE STILL IN THE FAX MODE

What printer are you using for this? Also what exactly do you mean by turning off fax mode?
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

How do i turn off the flight mode notification

So as Im boarding a flight, i turn my phone into flight mode, all good and well.
Then while im on my flight, trying to use my phone (read downloaded emails, listen to spotify music etc), everytime i swap apps it comes up with this VERY anoying 'Turn Off Airplane Mode or Use Wi-Fi to Access Data".
Im very much aware im in flight mode as i put the phone into it, is there a way I can turn this off?

Thanks mate, thought so. So sick of this uncustomizable software, looks like Android is the light at the end of the tunnel.

How can i turn off the sales mode

every time i leave the table in stand by a sony video start playing and every widgets i install get delete

You can turn if off by pressing *#*#73556673#*#* in the service menu.
Accessing the service menu might be little tricky.
Open contacts > menu button (dots in upper right corner) > settings > press and hold your finger above the software keys (4,2) or small apps icon (4,,) until enter service code appears. Press it and put in *#*#73556673#*#* in the dialer.

How can i take off the volume limitation from my ipod classic?

apparently the ipods being sold in europe have a limitation of volume due to some european laws.
as long as i listen to my ipod over normal headphones the volume is ok, but i would like to connect it as well to my scala-rider (motorcycle interphone system) and even with the volume at maximum i can hardly hear the music. i didn't have this problem with my former mp3-player, this means that the problem cannot be from the headphone of the scalarider.
in the ipod-options (on itunes) i already marked the maximum volume for all my songs, but it is still not enough.
is there any way to get this limitation off?
i know that for the older ipods there was a programm called "GoPod" but it does not work on the newer items.
thanks for your help.

Reset it: hold the Menu and center buttons down until it resets.
If that does not work you may just have to run the battery down.

How can you turn off the braille setting on an iPhone 4s, once on it won't let you slide the phone into use mode to change the settings or do anything?

How can you turn off the braille setting on an iPhone 4s, once on it won't let you slide the phone into use mode to change the settings or do anything?

An alternate method is Accessibility Settings when connected to iTunes. You should be able to turn it off there. I would also check out some of the answers listed to the right of this post and see if they can help.

How do I turn off the "dynamic trim mode"?

How do I turn off the "dynamic trim mode"? I hate it, hate it, hate it. For those that love it... great. I am glad you do, keep working. I tried to adapt, but it just isn't worth the hassle. For me, I want it gone forever. Too much zooming, no simple ripple delete.
Again, if you love it, great! I want to turn it off, how about me adobe? I am so ready to move back to CS5.

PierreLouisBeranek wrote:
Hi Jim,
You're right. What I wrote isn't the actual problem. My mistake.
The real problem is this:
If I select an edit point with the Selection Tool ('V'), for example, and then change to the Rolling Edit Tool, the cursor doesn't change while hovering over the currently selected edit point, and the only way to use the Rolling Edit Tool on the selected edit point is to first deselect it and then reselect it again. The same problem occurs vice versa.
If you toggle the trim type to "Roll" after selecting the edit with a keyboard shortcut this is not necessary. It might take some getting used to, but see if that works for you.
PierreLouisBeranek wrote:
If I select an edit point's left side (outgoing clip) with the Selection Tool, but then want to select the right side at that same edit point (incoming clip), dragging the cursor over to the right side of the edit point has no effect (i.e. the cursor stubbornly remains a left-pointing arrow for editing the prior clip's out point). The only way to select the right side of the edit point to first deselect the left side (i.e. click on any clip) and then select the right side. The same problem occurs vice versa.
Again, toggle the trim type with a keyboard shortcut (Shift-T is for Windows, Ctrl-T is for Mac), then your tool will appear and behave as expected.
It sounds like you wish to have the Final Cut Pro behavior, where the cursor that is chosen will appear over the edit, regardless of how the edit is selected. Note that here you must click to select the edit with the proper trim type before you drag the tool.
In Premiere Pro, the cursor will not change to the selected tool unless the edit is selected with the corresponding trim type. If you want to click and drag the trim tools as you did with Final Cut Pro, yes, you must deselect the selected edit point first.
Anyone can send me a PM at any time. I'm your representative to the Premiere Pro team.

How do I turn off the Power button Lockout on my HPw1858 monitor?

How do I turn off the Power button lockout on my HPw1858 monitor?
This question was solved.
View Solution.

Hi,
Power Button Lockout is displayed.
The monitor's Power Button Lockout function is enabled.
Press and hold the Power button for 10 seconds to unlock the Power button function.
If the above doesn't work then try a monitor reset. Unplug the monitor’s power cord and hold down the monitor’s power button for 30-60 seconds. Plug the monitor back in and power it up.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

How do you turn off the Mac book pro monitor when using dual monitors?

How do you turn off the monitor on the mac book pro and only see your second monitor?

You close the lid and run in "clam-shell" mode
http://support.apple.com/kb/HT3131?viewlocale=en_US

How do i turn off the compatibility mode on my ipod classic

Similar Messages

Maybe you are looking for