Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?
Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.
Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode
Similar Messages
-
I am using XP-SP3 & Firefox. When installing Flash Player Software i get a message: "This Publisher has been blocked from running software on this machine". How do i unblock it - HELP.
Hi,
This is a security setting on your system that is resulting in this behaviour, not Flash Player installer itself, or anything with the installer. There are many Google search results on this. The first hit I got, was the following from the Microsoft forums:
To unblock a software publisher:
1. In Internet Explorer, click the Tools button, and then click Internet Options.
2. Go to the Content tab, Look under the Certificates section.
3. Click on Publishers button.
4. Select the Untrusted Publishers tab.
5. Select the Publisher you wish to unblock and click the Remove button.
Maria -
recieved error message that states" itunes exe has been set to run in compatibility mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it. How do i access compatibility mode and turn it off ? Believe i have Windows 7.
Try the following document, only be sure that none of the boxes in the compatibility tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode -
I upgraded to 9.0.1 and every time I start Firfox I get the welcome screen and checking add on compatability Why? How can I just start with my homepage and not be welcomed every time I start Firefox?
See these articles for some suggestions:
*https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved -
With Windows 7 Home Premium, whenever I start iTunes, I get a message that colors have been reverted to Windows Basic because iTunes won't support my Windows Aero configuration. Is there a fix for the incompatibility? I don't mind the color changes, but I'm having an external speaker problem that could be related to the incompatibility (at random times--usually several hours after start-up, my external speakers--connected via my Samsung Central Station's wireless docking station and computer-installed dongle--shut off and won't play until I restart. I've investigated other options, but iTunes may be the problem.) Thanks.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
Using DW CC... Win 7 : Every time I start DW, I get message telling me to 'switch to" or retry.
Its more of an annoyance than a problem. I'm using Windows 7 Professional on an Intel i7 950 with 16 Gbytes of RAM and a Gforce graphics card with 3072 MBytes of RAM. I'm using the full suite of CC apps.
Every time I start DW I get this error message to "switch to" or retry before it will start. It's got something to do with a browser (I've got 3) but only Chrome has any Adobe related add ons. I recall some time many years ago I got the same message starting Corel Draw or Photo Paint. Come to think of it, that was the reason I moved to Adobe in the first place.
Any help will be gratefully accepted.Well... Yes and no to fixing it.
I followed that link's instruction — altered for Dreamweaver and yes, it lit up cleanly as administrator but before ever it reached 'booted' stage it warned me I had 00 days of trial left and needed I to register it. OK I'm a paid up renter. I fed it my username and it finished booting only to tell me again, I had 00 days of trial left and needed to register it. I knew where this was leading before ever I entered my email and password for the second time but let it happen anyway.
Then I decided I'd continue with the instructions, log out of DW and re-start it normally. Opps! This application has already been registered on two other machines. CC Manager at it again. Another hour wasted fixing CC dramas. I rebooted the PC without any external drives connected, just the 4 internal drives. OK... Lets start DW and see what happens. I'll tell you firstly that I installed DW on this machine 6 months ago and promptly removed it. Why? Because I get quicker results using notepad++ and I needed to get a job done in a hurry. No time to try and get my head around Dreamweaver in the process.
Honestly speaking I didn't 'cancel' that installation. I didn't realize this antique process still existed. Anyway... I reinstalled it last month with some time now to 'get my head around it'. CC doesn't speak my language and hasn't yet learned that when you tell it to remove a program, it needs to remove the registration of it too! So I got the 00 days trial left garbage again. Only difference this time it told me both the original install and second install (on the same machine) were still registered but luckily (I won't say for who) There was an option to cancel all other installations. and yes... It loaded cleanly and faster than I can recall it ever had previously. Will it keep doing this? Is this mess going to happen ever few months?
I'm prepared to believe CC's shocking uninstall is to blame. At the best of times it is a messy process, leaving registry entries and files scattered all over my drives. NOT very nice for such a complex program manager. I used to be able to keep it under control with Revo but now CC manager wants to do it all I think it needs a bib or diaper to stop messing up my computer. If this happens again now that I've killed (renamed actually) the folders in the instructions to fix lightroom doing the same thing... I'll lodge a critical error ticket.
Incidentally... How come searching for this solution didn't show up the answer you pointed me to? Is the forum search bot flaky too? -
HI. I just got a new macbook pro 15".
every time i launch garageband i get this message
"Error code 28773 was returned by the Audio driver."
when i hit record, the shaded area in GB starts to advance, but it doesn't record any sound, and when i hit the space bar, the recorded area disappears.
anyone know how to fix this?
I have installed BOOM, but i think that's the only extra sound software i have.]
PLEASE HELP!
thanks,
mojoman22Please read this whole message carefully, especially the warnings, before doing anything.
1. The changes to your configuration suggested here should be considered provisional; they may not solve your problem, or they may remove functionality that you find useful. If a third-party system modification that you want to keep is causing the problem, seek help from its developer.
2. WARNING: Back up all data now if you haven’t already done so. Before proceeding, you must be sure you can restore your system to its present state, even if it becomes unbootable. If you’re not sure you can do that, STOP — DON’T CHANGE ANYTHING. If you’re dissatisfied with the results of the procedure suggested below, restore from your backup. I will not be responsible for the consequences, and I will not be able to help, if you ignore this warning.
3. You should either remove or update the following system modification(s), if an update is available from the developer:
Parallels
and definitely remove at least the following:
Boom
† MacKeeper
† VirusBarrier
4. Whatever you remove must be removed completely, and (unless otherwise specified in this message) the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job. I can't be more specific, because I don't install such things myself. Please do your own research.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
Again, please don't ask me to do this research for you. You can do it better than I can, because I haven't installed the product and I may not even know what it is.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.
5. I recommend that you never reinstall the modifications marked with a dagger (†) above, if any. If your problem is resolved after uninstalling all the above modifications and rebooting, but you still want to use some of those not marked with a dagger, you can experiment with putting them back, one at a time, testing carefully after each step. Keep in mind that system modifications may be incompatible with each other or with future OS X updates, so it may not be clear which one is at fault.
6. If you still have problems after making the suggested changes and rebooting, post again. Remember: if you don’t like the results of this procedure, you can undo it by restoring from the last backup you made before you started.
Remove the "MacKeeper" crapware as follows.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions, nor do I intend to repeat the test.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select Go ▹ Applications from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. A dialog will pop up asking why you want to uninstall it. You don't have to provide that information. Enter anything you like in the text box, then click the Uninstall button. All the functional components of the software will be deleted. That's the only useful feature of "MacKeeper:" it deletes itself. Reboot.
Do not try to uninstall by dragging the MacKeeper icon in the Dock or the LaunchPad to the Trash.
Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cleaners,” “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this kind of material is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it. -
When i open my itunes of recent edition 12.0, i am getting error as "itunes.exe has been set to run in compatabiltity mode " Though i reinstalled it several times from last days ,the problem is not solved. Please provide the solution asap.
Try iTunes for Windows: How to turn off Compatibility Mode.
tt2 -
Hi,
I am unable to add my bank/card details in my apple account, every time i am getting a message that it has been declined. kindly help me in authorise my bank card in my apple account i need to purchase few apps, pls help meWhat sort of card are you trying to use ? If it's a debit card then I don't think that they are still accepted as a valid payment method - they are not listed on this page and there have been a number of posts recently about them being declined
If it's a credit card then is it registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? If it is then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes support and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management -
I try to open hyperlinks in my email (Outlook) but I get this message: "this operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator". I am running Firefox 3.6.6
== This happened ==
Not sure how oftenSee http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q310049 You receive an error message when you click a hyperlink in Outlook (default browser)
-
The SIM card In my iPhone 5 has been giving me occasional messages that there has been a SIM Failure, there is NO SIM, or that there is an INVALID SIM. Until today, I was able to restart it with no problem and the SIM card would start up. This afternoon the NO SIM message came up and I cannot fix it. What is my next step? I am traveling in Canada now and it is not convenient to come back to the States just to get a SIM card.
Thanks,
LouHi,
Thanks for getting back to me. How can I initiate Verizon sending me a new SIM card? I will be here long enough to receive it if they can send it to me.
I have been trying to call Verizon Wireless, but they won’t take my call from my Skype account and I don’t have my phone.
Thanks again,
Lou -
Sometimes when sending a mail it will go more often it won't go, it doesn't seem to be relevant to my geographic position and the message" a copy has been placed in your Outbox. The sender address" my email blah blah" was rejected by the server" . Any ideas?
Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional. -
When I sync my Iphone4 on Itunes I get a message saying that some apps (eg Find Friends) cannot update because its not compatible with my phone.
I also am not able to up/download mail even though my Provider is adamant the setting are correct...
IOS 7.1.2
would appreciate help with these issues :-)However after part of the Itune update completed a message came up on the screen
saying "The feature you are trying to use is on a net work resource that is unavailable.
Which particular .msi file does the message go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.) -
For about the past week, Facebook has been taking forever to load (or just doesn't) on my mac (OSX 10.5.8; Safari 5.0.6). Other sites are fine. I routinely empty the cache, clear history, cookies, etc. each time I shut down. Suggestions?
I don't use Facebook, but I can say that clearing the cache every time you shut down is excessive - unless you're sure the cache is corrupt you should leave it alone. It exists to speed up your browsing experience by loading frequently requested items from your drive rather than downloading them fresh from the internet each time. So, I would say stop clearing your cache and see what happens.
As for clearing cookies: I'm not sure what method you currently use, but I would recommend you download and install CCleaner. It's free, and allows you to build up a list of cookies that you want to clear and those you want to keep, before deleting them.
Both of these may help speed things up by reducing the amount of work Safari has to perform whilst browsing. Regardless, I'd say that, unless there's a reason you've not mentioned for performing the "purging" that you do, making these two changes should see improvements in general web browsing if not specifically when loading Facebook. -
I receive a message that my compatibity mode is set for an older version of windows how do I reset ?
I am receiving a message that I tunes is set to run in an older version of windows, how do I reset ?
Hey bayside property,
Welcome to the Apple Support Communities. If you are having a pop up that is telling you about compatibility mode, the following article will assist with removing that.
iTunes for Windows: How to turn off Compatibility Mode
http://support.apple.com/kb/TS1489
Regards,
-Norm G.
Maybe you are looking for
-
I AM TRYING TO OPEN ITUNES ON MY PC BUT WHEN I GO TO OPEN IT, I GET AN ERROR MESSAGE AND IT SAYS ``THIS COPY OF ITUNES IS CORRUPTED OR IS NOT INSTALLED CORRECTLY. PLEASE REINSTALL ITUNES.`` I `DON`T WANT TO LOSE MY APPS AND MUSIC AND I ALSO DON`T KNO
-
Action Pane in BPC Excel is not Coming
Hi All I am facing a sudden issue in BPC 7.5 MS Version. I am not able to view the Action Pane for BPC Excel. But it was coming before. Also the Action Pane is coming for BPC WORD & BPC POWER POINT. I have chekced the option under e-tools > VIEW PL
-
APP (F110) SHOULD ALLOW TO BLOCK BUT NOT ALLOW TO UNBLOCK
Hi Friends. Deepawali Wishes. I have one requirement in APP that should allow the user to block the documents which are free for payment(In editi payment proposal) but should not allow the user to unblock those documents which are blocked for payment
-
Vendor number with logic inbuilt for Purchasing organization
Hi, Can anyone help me to get Vendor Numbers based on purchasing organization. Example: Purchasing organization 1A, Vendor account no internal number range assigned is 10000-19999 Now we create new vendor code , it should be 1A10000, instead of 10000
-
Text load af vendor sub range - generic extractor
Hello BW experts, I have created a generic extractor for transfering vendor sub range texts into the text table of an info object. However the text doen't end up in the table.. It transfers all included lines in the source table to BW, but I get the