How do I use serial port read and show text, but not have it scroll off screen?
I am new-ish/returning amateur user of Labview and I am trying to edit the example VI "Advanced serial write and read VI" that is part of dev suite 2012. I need to use the string box to show ALL text received from serial port, always appending and only rolls off screen when more real data arrives at serial port.
What is actually happening is as more bytes (or no bytes AT ALL!) arrive during read time, current text rolls off the string box. Even when 0 bytes are received, screen is blanked out. I am not very familiar with functions locations and even worse at understanding obscure references to functions, so please keep replies very basic so I can follow.
Just to be clear, I need the string window to behave like hyperterm does-always shows data and it is not pushed out of window arbitrarily.
Thanks,
Steve
Solved!
Go to Solution.
OK- lets start back at the beginning. I have a few questions...
WHy does incoming txt get placed at top of txt box and then scroll up? why would it make more sense to input at the bottom and scroll toward the top. I have created this huge txt box that appears to be impossible to use.
I have attached example of txt boxes I have tried, and pic of VI I have edited. Bad marks for uglyness....
Attachments:
Capture_VI.JPG 117 KB
Capture_VI2.JPG 133 KB
Similar Messages
-
I do not have the "authority" on my work computer to do this, so I can't use firefox at work. Also, some of our programs do not work with the latest version of firefox..
Welcome to the Apple community.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi. -
How am I able to read the msnbc news but not have it print?cc=us
I have an HP Officejet Pro 8600 I have the fax hooked up but my home phone doesn't ring. What did I do wrong? When a call comes in on my home phone the fax rings but I have no dial tone on my home phone.
You may just have it plugged in wrong.
1. On the back of the printer, LINE 1, will go directly to the wall jack.
2. LINE 2, will go to the telephone
Then try to see if you get a dial tone and fax.
When you say, "print msnbc news', are you meaning, printing off the interenet?
Can you print anything else off the internet from another website?
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it. -
Hi to all,
I'm new with oaf and in mi AM i have to VO that I use to find relative information to the one is shown to the user on a query region, after the user pressed the go buton the CO request the AM tho load both VO and those information are used to show in a popup region to display and update. the main problem is when the popup region closes it send a submit to the server an the error "View object may not have been properly initialized during Update." is displayed
The main page and the popup uses the same AM, the initM2mVo() and initTavleVo() are called by the CO at the processRequest of the main PG, the popup dosen´t have a CO.
This the AM that uses the main PG and the popup region
package tasc.oracle.apps.tasc.m2m.imei.server;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.server.OAApplicationModuleImpl;
import oracle.apps.fnd.framework.server.OAViewObjectImpl;
import oracle.jbo.Row;
import oracle.jbo.ViewObject;
// --- File generated by Oracle ADF Business Components Design Time.
// --- Custom code may be added to this class.
// --- Warning: Do not modify method signatures of generated methods.
public class ActualizarImeiAMImpl extends OAApplicationModuleImpl {
/**This is the default constructor (do not remove)
public ActualizarImeiAMImpl() {
/*******************************USE FOR CUSTOM CODE****************************/
* Inicializa el vo a través del cual se ejecutara la actualización del IMEI.
* @param taskNumber
public void loadImeiVo(String taskNumber) {
OAViewObject voTableQry = getTableQryVO1();
if (voTableQry != null) {
voTableQry.reset();
voTableQry.setWhereClause(null);
voTableQry.setWhereClauseParams(null);
voTableQry.setWhereClause("TASK_NUMBER = :1");
voTableQry.setWhereClauseParam(0, taskNumber);
voTableQry.executeQuery();
if (voTableQry.hasNext()) {
voTableQry.next();
String idActuacion =
(String)voTableQry.getCurrentRow().getAttribute("IdActuacion");
String dsM2m =
(String)voTableQry.getCurrentRow().getAttribute("DsM2m");
String imei =
(String)voTableQry.getCurrentRow().getAttribute("Imei");
if (idActuacion != null) {
OAViewObjectImpl m2mVo = (OAViewObjectImpl)this.getTascTransEqInstM2mVO1();
m2mVo.reset();
if (!m2mVo.isPreparedForExecution()) {
m2mVo.setMaxFetchSize(0);
m2mVo.executeQuery();
m2mVo.setWhereClause(null);
m2mVo.setWhereClauseParams(null);
m2mVo.setWhereClause("ID_ACTUACION = :1 AND DS_M2M = :2 AND IMEI = :3 ");
m2mVo.setWhereClauseParam(0, idActuacion);
m2mVo.setWhereClauseParam(1, dsM2m);
m2mVo.setWhereClauseParam(2, imei);
m2mVo.executeQuery();
if(m2mVo.hasNext()){
m2mVo.next();
* Carga los valores disponibles de IMEI según el taskNumber al cual pertenezca
* el IMEI seleccionado.
public void loadImeiValuesList(String taskNumber) {
ViewObject viewobject = this.getImeiListVO1();
OAViewObject voTableQry = getTableQryVO1();
if (voTableQry != null && voTableQry.getCurrentRow() != null) {
String imeiType =
(String)voTableQry.getCurrentRow().getAttribute("Attribute17");
if (viewobject != null & imeiType != null) {
viewobject.setWhereClause(null);
viewobject.setWhereClauseParams(null);
viewobject.setWhereClause("TASK_NUMBER = :1 AND ATTRIBUTE17 = :2");
viewobject.setWhereClauseParam(0, taskNumber);
viewobject.setWhereClauseParam(1, imeiType);
viewobject.executeQuery();
/*******************************USE FOR CUSTOM CODE****************************/
/**Container's getter for TableVO1
public OAViewObjectImpl getTableVO1() {
return (OAViewObjectImpl)findViewObject("TableVO1");
/**Sample main for debugging Business Components code using the tester.
public static void main(String[] args) { /* package name */
/* Configuration Name */launchTester("tasc.oracle.apps.tasc.m2m.imei.server",
"ActualizarImeiAMLocal");
/**Container's getter for TascTransEqInstM2mVO1
public OAViewObjectImpl getTascTransEqInstM2mVO1() {
return (OAViewObjectImpl)findViewObject("TascTransEqInstM2mVO1");
/**Container's getter for ImeiListVO1
public OAViewObjectImpl getImeiListVO1() {
return (OAViewObjectImpl)findViewObject("ImeiListVO1");
/**Container's getter for TableQryVO1
public OAViewObjectImpl getTableQryVO1() {
return (OAViewObjectImpl)findViewObject("TableQryVO1");
this is the CO of the main PG
/*===========================================================================+
| Copyright (c) 2001, 2005 Oracle Corporation, Redwood Shores, CA, USA |
| All rights reserved. |
+===========================================================================+
| HISTORY |
+===========================================================================*/
package tasc.oracle.apps.tasc.m2m.imei.webui;
import java.io.Serializable;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.TransactionUnitHelper;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.layout.OAQueryBean;
* Controller for ...
public class ActualizarImeiCO extends OAControllerImpl {
public static final String RCS_ID = "$Header$";
public static final boolean RCS_ID_RECORDED =
VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean) {
super.processRequest(pageContext, webBean);
//get the handle to AM Attached to our Simple Page Region MainRegionRN
//The page is passed as parameter to this method, hence we can get handle
//to the AM quite easily
OAApplicationModule am = pageContext.getApplicationModule(webBean);
//verifica si la transaccion de creacion esta activa todavia
if (TransactionUnitHelper.isTransactionUnitInProgress(pageContext,"ActualizarImeiM2m", false))
// deshace cambios y finaliza Txn
am.invokeMethod("rollback");
TransactionUnitHelper.endTransactionUnit(pageContext, "ActualizarImeiM2m");
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext,
OAWebBean webBean) {
super.processFormRequest(pageContext, webBean);
//get the handle to AM Attached to our Simple Page Region MainRegionRN
//The page is passed as parameter to this method, hence we can get handle
//to the AM quite easily
OAApplicationModule am = pageContext.getApplicationModule(webBean);
//Detección del botón go de la región de query.
this.queryButonGO(pageContext, webBean, am);
this.updateImei(pageContext, am);
* Detección del botón go de la región de query
* @param pageContext
* @param webBean
* @param am
public void queryButonGO(OAPageContext pageContext, OAWebBean webBean,
OAApplicationModule am) {
OAQueryBean queryBean =
(OAQueryBean)webBean.findIndexedChildRecursive("QueryRN");
String idGo = queryBean.getGoButtonName();
if (pageContext.getParameter(idGo) != null) {
String tareaId = pageContext.getParameter("TaskNumberLovInput");
//Inicializa el vo a través del cual se ejecutara la actualización del IMEI.
Serializable[] parameters2 = { tareaId };
Class[] paramTypes2 = { String.class };
am.invokeMethod("loadImeiVo", parameters2, paramTypes2);
//Carga los valores disponibles de IMEI según el taskNumber al cual pertenezca el IMEI seleccionado.
Serializable[] parameters = { tareaId };
Class[] paramTypes = { String.class };
am.invokeMethod("loadImeiValuesList", parameters, paramTypes);
public void updateImei(OAPageContext pageContext, OAApplicationModule am){
if (pageContext.getParameter("ActualizarImei") != null){
String imei = pageContext.getParameter("ImeiPopup");
//TODO......
thanks to all.I thing I got the problem.
I have the following configuration:
One Main Page and external RN that is call as popup in main page
2 VO, queries by java code, one to capture some information that is used to query the 2 VO that I use to update information by the popup.
One AM that is map only in the Main Page. (Initially I had the external RN mapped to same AM as the main PG, but I remove it).
The solution was remove the mapping of the AM from the external region and in the messageimput of the external region set the View instance and view Attribute manually in this fields (http://screencast.com/t/uDTALEedCh do not use the wizard ) as the one instanced am the AM, so the problem it seem that was that defining an AM to the external region create a new instance, causing that it can not see the information that I load manually in the VO by query it them.
for this case there is not need to use the next code, because the Rows are load with information by the query in the java code, this only will have to be made when inserting a new row .
public void initM2mVo(){
//get a handle to the View Object that we wish to initialize
OAViewObject vo = (OAViewObject)this.getTascTransEqInstM2mVO1();
if (!vo.isPreparedForExecution()) {
vo.setMaxFetchSize(0);
vo.executeQuery();
//Create a blank Row
Row row = vo.createRow();
//Attach that blank row to the VO. Data will be fed into this row, when the user types into the fields
vo.insertRow(row);
//Set the status of the blank row to initialized. This tells OA Framework that record is blank and must not be included in DML
//Operations until changes are made to its underlying VO [via screen fields]
row.setNewRowState(Row.STATUS_INITIALIZED); -
How to use an apple id on an iPad but not have it connect with my phone and mac
I've recently sold my ipad to my younger sisters who are using my apple id. once they are in wifi they are able to use facetime and imessage but it connects with my email and phone number. They are also able to view my pictures in "my photo stream". Is there a way to let them us my apple id but completely disable the id from imessage, facetime, and making sure my photo stream does not show up?
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
When you created your iCloud account, the @me.com email address you created also automatically became an AppleID, but you used an exisiting AppleID in the first place to create the iCloud account before deciding on that @me.com address. So your iCloud account is actually the AppleID you used to initially create the account, not the @me.com address assigned once the iCloud account was active (look in your account settings on your iPhone or iPad and you can see what the iCloud account primary AppleID is).
Unless you specifically started using your new @me.com address for things, it is an unused AppleID, but it is NOT your iCloud account primary ID (that is whatever AppleID you used to create the iCloud account initially).
An AppleID is nothing more than an email address, but it is linked to an AppleID account held with Apple and thus can be used to log in to services including the various Apple stores. -
After downloading v5 I ran the programme as instructed. THe google screen "find out more" came up but I was unable to get access to the browser again
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
*Use a compressed image type like PNG or JPG to save the screenshot
*Make sure that you do not exceed the maximum size of 1 MB
Check the date and time and time zone in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
Check out why the site is untrusted and click "Technical Details" to expand this section.
If the certificate is not trusted because no issuer chain was provided (sec_error_unknown_issuer) then see if you can install this intermediate certificate from another source.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the <b>issuer of the certificate</b>.
You can see more Details like intermediate certificates that are used in the Details pane.
If <b>"I Understand the Risks"</b> is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
*Note that some firewalls monitor (secure) connections and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the website's certificate.
*Note that it is not recommended to add a permanent exception in cases like this, so only use it to inspect the certificate. -
Right now Task manager Performance tab on Memory says: Total 3958; Cached mem 1588; Avail 2239; Free 722; Physical Mem 43% and this window is the only thing open. Kernel mem (MB) says Paged 179 and Nonpaged 80.
I can get you more info if you tell me what you need (and where to find it - I am 60 y.o. woman and this is not my forte :=)
Thanks,
sandyIf you want to reduce memory(60%) '''when firefox minimize[only in windows os] '''there is an easy old good trick:
type in the address bar '''about:config'''
then press the button '''i'll be careful i promise'''
then '''right-click''' anywhere in the list of preferences and choose '''new''' > '''boolean'''
then type in the open window '''config.trim_on_minimize'''
then click''' OK''', and in the next window select '''TRUE''' and click '''OK'''.
exit firefox and restart-it.
'''works only in windows os'''
see for more info :
[http://kb.mozillazine.org/About:config About:config]
[http://kb.mozillazine.org/Config.trim_on_minimize Config.trim on minimize]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
How do I get my creative cloud and adobe photoshop to not have such tiny icons?
Screen shot for reference.
Hi Ben,
Thank you for your post.
I believe icons size is correct because this is as design. You can compare this with other system as well. It is depending upon the windows resolution. Please try changing the windows resolutions.
Change your screen resolution
Also, if you click on Apps tab, you should see the bigger size of icon.
Regards,
Devendra -
I just got my iPhone 4S and when I delete my email from the phone, they are also deleted from my email account on the computer. When I had a Blackberry, there was an option to delete from the phone only or delete from both. Does anyone know if this is possible with the iPhone and if so,m how I do it? Thanks.
Not sure what email you are dealing with but when I go into the setting for mail and choose one of my accounts I can go to the Advanced settings for that account and click on "deleted mailbox". Leave the setting for "On My iPhone" to Trash. Under "On the Server" you can change where the messages go. Default is probably set to "Trash". Change it to "Saved" (if that folder is there) or create a new folder in your email client (access it from a computer and see if you can add a folder. Then check setting on your phone to see if the new folder shows. If so, then have the emails go to that folder. I would think this should work the way that you want. Just test it out and see if that works.
-
I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost
Hello,
You mention that you send a string to the microprocessor that tells it how many bytes to send. Instead of requesting 512 bytes, try reading 10 times and only requesting about 50 bytes at a time.
If that doesn�t help, try directly communicating with your microprocessor through HyperTerminal. If you are not on a Windows system, please let me know. Also, if you are using an NI serial board instead of your computer�s serial port, let me know.
In Windows XP, go to Start, Programs, Accessories, Communications, and select HyperTerminal.
Enter a name for the connection and click OK.
In the next pop-up dialog, choose the COM port you are using to communicate with your device and click OK.
In the final pop
-up dialog, set the communication settings for communicating with your device.
Type the same commands you sent through LabVIEW and observe if you can receive the first 54 bytes you mention. Also observe if data is returned from your 512 byte request or if HyperTerminal just waits.
If you do not receive the 512 byte request through HyperTerminal, your microprocessor is unable to communicate with your computer at a low level. LabVIEW uses the same Windows DLLs as HyperTerminal for serial communication. Double check the instrument user manual for any additional information that may be necessary to communicate.
Please let me know the results from the above test in HyperTerminal. We can then proceed from there.
Grant M.
National Instruments -
Send command to modem using serial port and capture the response in the labview
hello.
I am doing my shool project.
I want to send command to modem using serial port and get the response in the labview.
When i run my program and enter"AT", only messy code will be displayed.
can anyone help me? thanksDora0512 wrote:
Thanks for you all. My partner got it already.
I am doing send sms part.
Can anyone tell me why my program is not so steadily?
It means this program can run. But somtimes I cannot receive sms. sometimes can
Basically, it is not well-written from both a LabVIEW and a communications point of view. Unfortunately, I can't elaborate because today is an exrtremely busy day at work. I'm hoping this bump will prompt someone to help you with your problem. If you could also provide us with the programmer's guide or the manual for your equipment, that would be extremely helpful.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all. -
How do I process serial port strings as bits
In response to my commands, my instrument is sending bytes to my serial
port. In one instance, 2 bytes are received. I want to treat these 2 bytes
as a group of 16 bits.
The VISA and Compatibility Serial functions return these bytes from the
serial port to Labview clearly labelled a "string".
Everything I can find in the way of Labview functions and .vis don't want to
do bit twiddling, bit swapping, and bit dropping, with "string" data.
I thought "hex string to number" could be used here, but I can't find a way.
The 2 Bytes in question can be represented as hex, but the data are not the
ASCII codes for the hex representation of a binary number, they are the
binary number. This "hex string to number" seems to want ASCII c
odes.
You can feed a hex number typed into a "control" box wired into "hex string
to number" and you get a meaningful number. You can feed the 2 bytes from
the serial port into an "indicator" set to read in hex and you get a hex
number that is a correct representation. But that is Labview handing them
around to itself. I need to get my "hands" on them.
I can't feed those same bytes that show up as a correct hex representation
in an indicator into the "hex string to number" or anything else, so far,
and get a number that is useful for further processing.
I thought "variant to data", but I can't find enough reference material to
understand how to use it. A boolean array seems like a bit of a weird
approach, so I thought I'd ask before I looked into that.
I'm used to dealing directly with binary numbers on the processor stack, I
call them whatever I want, and turn them into anything I feel like.
I'm sure I'm staring the solution in the face, but I can't find any way to
persuade
Labview to treat this "string" data as 16 bits.
I've got the 16 bits, which is better than not having them, but I don't have
much hair left.duh, well I finally discovered the "Unflatten from String" function. A guy
just feeds in the bytes he's collected from his serial port that Labview
thinks are a "string", and out come lovely little unsigned 16 bit numbers,
or whatever other type of number he wants to turn the bytes into. And there
are great little bit twiddlers available after that, like "swap bytes", and
you can mask out bits with the logic operators, why this is fun. There's
nothing like being a moron...... fly me to the moon...................
"David Lewis" wrote in message
news:[email protected]..
> The two bytes would come from a serial port read.vi in Labview, classed as
a
> string. For instance, D3 and 02. The output wou
ld swap the two bytes,
i.e.
> to 02 and D3, consider the two swapped bytes as 16 bits, drop the six most
> significant bits, and output the ten bits that are left as an integer
> classed by Labview as some kind of number, not a string.
>
> Your example StringToBits_Converter.vi I found on the ni.com site
> unfortunately gives an error message and refuses to open on my system
saying
> it comes from a newer version of Labview 6 than I am running. Mine says
> 6.0.1b3. Thank you very much anyway.
>
> "FightOnSCTrojan" wrote in message
> news:[email protected]..
> > In another words, you want to create a VI in which the input is 2
> > strings (i.e. AB) and the output is the converted array bits (e.g.
> > 1010101010101010)?
>
> -
I am using serial port to get data from a fusion splicer. The number of bytes at the port is 4096 but the read buffer of VISA read is empty. I am reading the same number of bytes. Can any one tell me what is the maximum size of VISA Read buffer? I am trying to put the contents of the buffer in a file. I am using labVIEW 6.1 on linux.I am also attaching the VI.
I also noticed this problem...If I read the number of bytes in the serial buffer many times, sometimes it reads it as 0 and I have to keep trying until it reads this 4096 bytes.
Thanx for any help.
S.Vijayalakshmi
Attachments:
serail_comm.vi 52 KBHey Viji,
In your application it looks like you are just checking to see how many bytes are at the serial port. Is it possible that your application is check for the serial data at the port before the data actually gets there. If you are looping this code as a subVI or just running it over and over it is possible that one of the iterations could occur faster than your device can write the information to the bus. In this instance you are checking the number of bytes at the port and there might not be any there yet. In this case the port reads 0 as you have designed it.
If you want the read function to wait and always read 4096 then don't wire the bytes at port to the read function. Just wire a constant/control equal to 4096 to the read function instead o
f the bytes at port. In this case, if there are not any bytes at the port the read function will wait for the bytes to show up or until the timeout period is reached.
I would also, suggest lowering your time to something more reasonable, because if your instrument quits transmitting your application is going to wait for 33 minutes. That is a long time for a program to hang.
I hope this helps out.
JoshuaP
National Instruments -
How do I stop Serial "VISA Read" from giving me packets instead of available bytes.
Dear Labvillians,
Highlight:
How do I stop serial "VISA read" from giving me packets instead of bytes?
Background:
I have a system that serially publishes 14 byte packets on a semi-regular interval.
At busy times, the producer of these these packets queues the data, effectively producing super-packets in multiples of 14 bytes sometimes as large as 8 packets (112 bytes).
My protocol handler has been designed to processes bytes, packets or super-packets.
My application now has multiple devices and the order of message processing is critical to correct functionality.
My observation is that the VISA read waits until the end of a packet/ super-packet before passing the data to the application code. (See Plot Below)
My expectation is that VISA read should give me available bytes, and not get too smart for itself and wait for a packet.
I have observed this on PXI, Embedded PC, cFP and most recently, cRIO
I have experimented with the cRIO's Scan interface rate, which helps with reducing the packet backlog but doesn't resolve to sub-packet byte read.
I understand that one solution is to Write FPGA code to handle it and pass the bytes through R/T-FIFO, and there are some great examples on this site.
Unfortunately this doesn't help with non FPGA devices.
I have also dabbled in event based serial reads but it is diabolical on vxWorks devices.
Any Help is appreciated
iTm - Senior Systems Engineer
uses: LABVIEW 2012 SP1 x86 on Windows 7 x64. cFP, cRIO, PXI-RT
Solved!
Go to Solution.Sometimes Talking to yourself is helpful.
I hope this is a useful Nugget for someone in the future
iTm - Senior Systems Engineer
uses: LABVIEW 2012 SP1 x86 on Windows 7 x64. cFP, cRIO, PXI-RT -
Problem --serial port reading one character at a time
Hi Friend,
I reading the serial port one character at a time , i specified it in the "serial bytes to read" option in serial port read examples.
The problem is ----------i can able to read the data.
but only the first character is reading again and again...and "reading string indicator" in the serial port example shows only the first character sent ..only for a single time.since i am reading continously ----aleast the first character should display as many times i running the program
(i am running the vi by run continous option..........)..
please help me ....how to read the character one by one.....
regards
rajasekarHi jason...
I can able to read the serial port by 1 byte or 2 byte or 4 byte as i can specify it in the serial port read bytes option..(in visa serial read)..
I need to acquire 4 bytes of data and pass it to the Math-script node..and save these 4bytes of data in array (1 row and 4 column)..
And split this array(just like array-indexing.vi) and processing it each each column separately....
or suggest some method to achieve my task.....please.
one more thing the math-script node is placed in a while loop.....in order to read sequence of bytes continously.......
regards
rajasekar
Maybe you are looking for
-
Entering a URL in the address bar and hitting enter does nothing. Neither the "enter" button or "address bar arrow", for going to the website, function. Website does not load and no error messages appear. "Enter" button works fine in the FF search bo
-
How to setup the connection between non-unicode client and unicode server?
hi. we played the program in 4.6x that call a data from unicode server (ECC6.0) to non-unicode server. ( not played in the unicode server.) When a program ended that English Character was normal, but Korean Chinease... was unknown text. I think conv
-
Using Get Data From Aggregation event class in SQL Profiler - SSAS 2012
Hi, I'd like to understand better the use of the Get data from aggregation event class in SQL Profiler to monitor a MDX query and which info provide. Fe, does it return the MDX query? Is it possible to use this event class in order to monitor MDX que
-
Insert, search, delete performance overhead for different collections
Hi, I am trying to create a table which compares performance overheads for different collections data structures. Does anyone want to help me out? I want to put a number from 1 - 9 in each of the question marks. 1 being very poor performance and 9 be
-
Edit: Mistakenly thought I had an error. IGNORE Message was edited by: lamouroux