How do I use shipping rate tables on my listing.

ok, really having a nightmare on this one. Explanations would be great guys I have set up a postage policy and I ticked the large/bulky package option. It says underneath specify your shipping in your item description as it removes any further options within the policy settings themselves. If I choose flat rate [same for all] I do get 2 tick boxes at the bottom for international and domestic rate tables so I tick them as that is waht I want to use but because I chose flat rate to get those 2 tick boxes it wants me to add a value which defeats the shipping rate tables really. Other option is self collection which again turns off all other options in the policy page. When I post my item I get the choice of choosing the policy which is set to large bulky packages etc.I can enter dimensions and a weight but the ebay help description suggests I should see the option to tick the rate tables which I do not get. It mentions I cna add more options from within the P&P heading section of the item listing but I do not get that option either. I have buyers which is great news but all of them are asking for me turn on the postage /sighI would love to but cannot get any options at all to tick postage rate table as the postage setting. I have set the tables up for both domestic and international. Any advice would be appreciated as I am pulling my hair out trying to work this out Cheers all.

If you are using Flat Rate Shipping to ship large parcels, you are going to be losing money on postage.Here are a couple of Canadian postal codes.V8R 5G8/ K0A 0A6/ A1B 4J6 and for the USA90210/ 20500.Go to canadapost.ca and enter the same set of dimensions and weights for each of those codes.https://www.canadapost.ca/cpotools/apps/far/business/findARate?execution=e2s1And save that link- it is ridiculously hard to find.See the differences? And use METRIC measurements. Canada Post went metric in 1974 and every other measurement will be an estimate. The Calculated Shipping doesn't show you any tables. Instead it shows your customer how much postage is to his address. You can see this if you go to your listing->Shipping & Handling-> and then enter various destinations. It's automatic. You don't need any table. Certainly not in your listing. BDR-- Buyers Don't Read.Make the customer's job as easy as possible.

Similar Messages

How can i use the nested table in form 6i

how can i use the nested table in the form 6i
( i.e i want to insert record into the nestred table field ).
bye siddharth singh

Nested tables are not supported in Forms 6i, only simple object tables.

How do I use Active Sync to view SharePoint Lists (Contacts and Calendars) on a Mobile Phone?

We are attempting to use SharePoint 2010 in combination with Exchange 2010 to implement shared calendars and contact lists throughout our organization. We are able to connect the lists to Outlook 2010, but have been unsuccessful in viewing
the calendars and contact lists from our mobile phones. How do we use Active Sync to view SharePoint Lists (Contacts and Calendars) on a Mobile Phone?
In trying to answer this question, we have come across a few different possibilities, all of them falling just short of a long term solution for us. After doing research, we found that Active Sync will only show the default folders of the account. To
solve this, we downloaded an Add-In for Outlook (CodeTwo FolderSync) to synchronize folders and synchronized our SharePoint list with a new Contact list in the default folder. The issue we came across with this method is that the Add-In we are using
is not capable of automatic synchronization. There is a button and it must be clicked after every update is made, which is not ideal for our solution. We then went to the company (CodeTwo) and found server side software (Exchange Sync) that they
offer which will automatically synchronize the folders. After installing that on the Exchange Server, we now are running into the issue of not being able to locate the SharePoint lists on the Exchange Server.
Does anyone happen to know how we can get to the SharePoint lists from the Exchange Server? Has anyone else been able to use shared contacts lists and calendars from SharePoint on their mobile phones using Active Sync? If so, are we in the right
direction with what we have found so far?
Thanks,
Brad

You cannot use ActiveSync for that, but there are SharePoint clients for the iPhone. Windows Mobile 7 natively supports SharePoint with SharePoint Workspace Mobile, part of Microsoft Office Mobile. Android and BlackBerry might also have some apps.
Use Microsoft SharePoint Workspace Mobile
http://www.microsoft.com/windowsphone/en-us/howto/wp7/office/use-office-sharepoint-workspace-mobile.aspx
iPhone SharePoint Apps Shootout
http://www.codeproject.com/KB/iPhone/iPhoneSharePointApps.aspx
Comparing SharePoint iPhone Apps
http://blog.praecipio.com/2010/11/02/comparing-sharepoint-iphone-apps/
MCTS: Messaging | MCSE: S+M

How do I use the option "table view" in NetWeaver 2004s Query Designer?

Dear,
We have used NetWeaver 2004s Query Designer, We found a strange problem. The option to select table view is not available. It is greyed out. How can you select table view (tabular) in 2004s Query Designer?
I have read the help doc about tabular view of NetWeaver 2004s Query Designer, I check my query, it has only one structure . but the option is still greyed out. I rebuild the query with 3.x Query Designer in tabular view, and reopen it with 2004s Query Designer, So there is a tab named "tabular view" display, but the option to select table view is still not available, and when users view the query result in web , it is still not in tabular view display. So I am confused, is there a bug with NetWeaver 2004s Query Designer?
Please help me. Thanks!

Note 1002271. Seach this note to use key word "table view"

*How can we use the internal table in module pool programming? Clarify plz*

If we creating a screen using the table having four fields(for e.g.). The screen has the functions of display, modify, delete, save, exit etc for the fields. The front-end of the screen having I/O fields of the table using internal table. How can we declare the internal table in the screen?

HI,
Create one WA for your Internal table and then map it to your fields.
For Example,
Data : begin of wa,
          name(10),
          age type i,
           end of wa.
data : it like table of wa with header line.
Then in screen create input fields with the name, age and ***.
Then the user entered values are stored in name age and ***.
then you can manipulate with that values using wa.
Thanks.

How can I use Indexed Temp tables to optimize performance?

Instead of joining two CTEs together, I am now going to attempt to join two indexed temp tables.
The first temp table is a number of encounters that returns 147 rows in 2 seconds. The second temp table
is progress notes for all those encounters returning 136 rows in 18 seconds. Joining the indexed views comes back at 3 1/2 minutes.
What can I do to optimize performance?
Code is below. Thanks in advance!
if object_id('tempdb..#arpb') is not null begin drop table #arpb end;
if object_id('tempdb..#progress_notes') is not null begin drop table #progress_notes end;
SELECT DISTINCT
ARPB.PAT_ENC_CSN_ID, ARPB.SERVICE_DATE, ARPB.BILLING_PROV_ID, ARPB.DEPARTMENT_ID,
SER.PROV_NAME, DEP.DEPARTMENT_NAME, E.APPT_TIME, ZC_APPT.NAME AS APPT_STATUS
INTO #arpb
FROM ARPB_TRANSACTIONS ARPB
LEFT OUTER JOIN CLARITY_SER AS SER ON SER.PROV_ID = ARPB.BILLING_PROV_ID
LEFT OUTER JOIN CLARITY_DEP AS DEP ON DEP.DEPARTMENT_ID = ARPB.DEPARTMENT_ID
LEFT OUTER JOIN PAT_ENC AS E ON E.PAT_ENC_CSN_ID = ARPB.PAT_ENC_CSN_ID
LEFT OUTER JOIN ZC_APPT_STATUS AS ZC_APPT ON ZC_APPT.APPT_STATUS_C = E.APPT_STATUS_C
WHERE ARPB.DEPARTMENT_ID = xxxx
AND ARPB.TX_TYPE_C = 1
AND ARPB.VOID_DATE IS NULL
AND ARPB.BILLING_PROV_ID = xxxx
AND ARPB.SERVICE_DATE BETWEEN
'xxxx' AND 'xxxxx'
create clustered index idx_temp_arpb on #arpb(PAT_ENC_CSN_ID)
SELECT DISTINCT
ARPB.PAT_ENC_CSN_ID,
ZCNT.NAME AS NOTE_TYPE, PR.NAME AS PURPOSE, HNO_INFO.NOTE_ID,
EMP.NAME AS EMP_NAME, STS.NAME AS NOTE_STATUS
INTO #progress_notes
FROM ARPB_TRANSACTIONS ARPB
LEFT OUTER JOIN ENC_NOTE_INFO AS ENC_NOTE_INFO ON ARPB.PAT_ENC_CSN_ID = ENC_NOTE_INFO.PAT_ENC_CSN_ID
LEFT OUTER JOIN HNO_INFO AS HNO_INFO ON ENC_NOTE_INFO.ENCOUNTER_NOTE_ID = HNO_INFO.NOTE_ID
LEFT OUTER JOIN ZC_NOTE_TYPE AS ZCNT ON ZCNT.NOTE_TYPE_C = ENC_NOTE_INFO.NOTE_TYPE_C
LEFT OUTER JOIN ZC_NOTE_PURPOSE AS PR ON PR.NOTE_PURPOSE_C = HNO_INFO.NOTE_PURPOSE_C
LEFT OUTER JOIN CLARITY_EMP AS EMP ON EMP.EPIC_EMP_ID = HNO_INFO.CURRENT_AUTHOR_ID
LEFT OUTER JOIN ZC_NOTE_STATUS AS STS ON STS.NOTE_STATUS_C = ENC_NOTE_INFO.NOTE_STATUS_C
WHERE ARPB.DEPARTMENT_ID = xxxx
AND ARPB.TX_TYPE_C = 1
AND ARPB.VOID_DATE IS NULL
AND ARPB.BILLING_PROV_ID = xxxx
AND ZCNT.NAME = 'xxxx'
AND ARPB.SERVICE_DATE BETWEEN
'xxxx' AND 'xxxx'
AND PR.NAME = 'xxxxx'
create index idx_temp_pn on #progress_notes(PAT_ENC_CSN_ID)
SELECT
#arpb.PAT_ENC_CSN_ID,
#arpb.APPT_TIME,
#arpb.SERVICE_DATE,
#arpb.BILLING_PROV_ID,
#arpb.PROV_NAME,
#arpb.DEPARTMENT_ID,
#arpb.DEPARTMENT_NAME,
#progress_notes.EMP_NAME as NoteEmp,
CASE #progress_notes.NOTE_ID
WHEN null THEN 'No Progress Note'
ELSE #progress_notes.NOTE_ID
END as NoteId,
#progress_notes.NOTE_STATUS,
#progress_notes.NOTE_TYPE,
#progress_notes.PURPOSE
FROM #ARPB
LEFT JOIN #PROGRESS_NOTES ON #ARPB.PAT_ENC_CSN_ID = #PROGRESS_NOTES.PAT_ENC_CSN_ID
To err is human, to REALLY foul things up requires a computer

Something is not right here. What is the type of that column in both temp tables?
I would assume that joining 147 and 136 rows should be done in less than 1 sec. even without indexes.
How did you measure the time?
BTW, I suggest to use aliases in your last query - it will be easier to read. Also use COALESCE function instead of CASE for the Note_ID (BTW, is Note_ID a character column - otherwise you supposed to get an error).
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

How can I use one hierarchical table as a node of another hierarchical tabl

I have a requirement where I have two hierarchical tables and one table should work as node for other table . How to achieve this??
To elaborate more the structure is like
Main Table (Company Structure)
Sub table Consolidation Groups which has got hierarchical structure
Sub table Entity which is also hierarchical.
The Entity table should act as a node for table Consolidation Groups
How can I achieve this functionality??
Thanks
Suvarna

you misunderstood me apparently. I said you can't organinze to tables so one serves as a node's value of the other. Let me show you wnat I suggested by an example.
First table has such values:
-A
|-B
|-C
and the second one is
-x
|-y
|-z
-p
|-r
|-s
I thought you wanted to confine relationships between them so fo B node be able to select only x's branch and for C - only p's branch. If it's similar to the truth then let's create another table with two fields. Field one points to table containing capital letters and field two - lower case letters. Both fields are of type lookup pointing to an hierachial tables. Now when you populate this table you'll create records like (I list two columns):
B - y
B - z
C - r
C - s
from your orinal table from now you should point to the above table. So instead of having two fields each pointing to its own table and compeling you to think how to organize two hierarchies, now you have only one field pointing to a table with all valid combinations. When you populate this table though YOU have to decide what such combinations are. It may make sense (if you have different users) to restrict access to this table on read-only level for regular users to preserve the valid combinations.
Hope it helps but if I understood your wrong give a concrete example.

How can i use the internal table as a WHERE clause ?

Dear Support ,
I have one internal table that save the material information ...
data : begin of itab ,
matnr like mara-matnr ,
end of itab .
And now i want to fetch the material desription text base on this internal table .
As i know that the "FOR ALL ENTRIES" statement is not allowed us to use "IN" this keyword ....
So , Has another solution for this case ? I don't want to use "LOOP AT ...." this way ...
Many thanks .
Carlos

Why can't you do
SELECT MATNR MAKTX INTO TABLE ITAB2 FROM MAKT FOR ALL ENTRIES IN ITAB WHERE MATNR = ITAB-MATNR.

How to Implement a Chained Hash Table with Linked Lists

I'm making a migration from C/C++ to Java, and my task is to implement a Chained Hash Table with a Linked List. My problem is to put the strings(in this case names) hashed by the table using de Division Metod (H(k)= k mod N) in to a Linked list that is handling the colisions. My table has an interface implemented(public boolean insert(), public boolean findItem(), public void remove()). Any Help is needed. Thanks for everyone in advance.

OK. you have your hash table. What you want it to do is keep key/value pairs in linked lists, so that when there is a collision, you add the key/value pair to the linked list rather than searching for free space on the table.
This means that whenever you add an item, you hash it out, check to see if there is already a linked list and if not, create one and put it in that slot. Then in either case you add the key/value pair to the linked list if the key is not already on the linked list. If it is there you have to decide whether your requirements are to give an error or allow duplicate keys or just keep or modify one or the other (old/new).
When you are searching for a key, you hash it out once again and check to see if there is a linked list at that slot. If there is one, look for the key and if it's there, return it and if not, or if there was no linked list at that slot, return an error.
You aren't clear on whether you can simply use the provided linked-list implementations in the Java Collections or whether you have to cobble the linked list yourself. In any case, it's up to you.
Is this what you're asking?
Doug

How I can use Visual Studio 2013 to create lists or libraries via remote?

Hello guys,
I use visual studio on my machine and try to create a list, but the sharepoint server is on another machine. It is possible to run a program on my computer and then create a list on the sharepoint server. If yes, how can I achieve this?
Best regards
Matthias

You can create and manage lists and libraries using SharePoint Designer. To use Visual Studio you would have to create a SharePoint project, create a feature, define the list, etc. then create a Solution package and deploy that to the server. If you just
want to manually add a list then use Designer.
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

How can I use more than 2 dependent dropdown lists

I would like to create a form using three level of dépendent dropdown lists.
Some examples exist with States dropdown list depending on a Country dropdown list. I would like to have a third level City depending on the choice made in the second list. Thanks for your help and sorry for my English

Hi,
I used the script from http://acrobatusers.com/tutorials/js_list_combo_livecycle1 to create a two dependent drop-downs and then was able to extend this to three dependent drop-down lists. I have put an example up at https://workspaces.acrobat.com/?d=Ph1ZsLxdyeZk9dq9qovNeQ
Hope this helps,
Greig

How can I use a date range in a list KPI value expression

I am trying to create a series of status indicators for a document library in SharePoint 2010. I've made a status list for this. One of the desired KPI's is to show the percentage of documents that must be revised and approved within the next two
months.
I have a field which logs the next approval date (last approval date plus one year). In the standard form for the KPI I can set the value expression to return the percentage of documents to be reviewed between [Today] and a date that I fill
in by hand (see image below). But I haven't yet been able to have the target date (two months from today) change dynamically. Is there a way to have the second date increment via a calculation here? Or do I need to use a recurring workflow to do this?
Any help would be greatly appreciated - also if this post should be elsewhere. I am not a programmer, and just beginning to learn to make use of many of SharePoint's functions.
Cheers,
Russ Herald

I'm not certain if you can use formulas here but if you can use the standard SharePoint Field Formulas you could try the following:
For the second date could you just put: [Today]+60 to add 60 days to the current date
Or to work with actual months you could possibly use: =DATE(YEAR([Today]),MONTH([Today])+2,DAY([Today])) to add exactly two months.
Reference:
https://msdn.microsoft.com/en-us/library/office/bb862071(v=office.14).aspx#sectionSection2

How do I use Derived Table to dynamically choose fact table

How do I use the Derived Table functionality to dynamically choose a fact table?
I am using BO XI R2 querying against Genesys Datamart kept in Oracle 10g. The datamart contains aggregated fact tables at different levels (no_agg, hour, day, week, etc...) I would like to build my universe so that if the end user chooses a parameter to view reports at daily granularity, then the daily fact table is used; choose hourly granularity, then hourly fact table is used, etc....
I tried using dynamic SQL in Oracle Syntax, but Business Obljects Universe didn't like that type of coding.
The tables look something like this:
O_LOB1_NO_AGG o
inner join V_LOB1_NO_AGG v on o.object_id = v.object_id
inner join T_LOB1_NO_AGG t on v.timekey = t.timekey
Likewise, in the 'hour', 'day', 'week', etc... fact tables, the Primary Key to Foreign Key names and relationships are the same. And the columns in each O_, V_, T_ fact table is the same, or very similar (just aggregated at different levels of time).
I was thinking of going a different route and using aggregate aware; but there are many Lines of Business (20+) and multiple time dimensions (7) and I believe aggregate aware would require me to place all relevant tables in the Universe as separate objects, which would create a large Universe with multiple table objects, and not be maintenance-friendly. I also was going to dynamically choose Line of Business (LOB) in the derived tables, based on the end user choosing a parameter for LOB, but that is out-of-scope for my current question. But that information sort of points you down the train of thought I am travelling. Thanks for any help you can provide!

You can create a derived table containing a union like the following:
select a,b,c from DailyFacts where (@prompt('View'....) = 'Daily' and (<rest of your where conditions here if necessary>)
union
(select a,b,c from MonthlyFacts where (@prompt('View'....) = 'Monthly' and (<rest of your where conditions here if necessary>))
union
(select a,b,c from YearlyFacts where (@prompt('View'....) = 'Yearly' and (<rest of your where conditions here if necessary>))
I assume that you are familiar with the @prompt syntax
Regards,
Stratos

How to use PL/SQL table

Hi all,
can you guys suggest me how can I use pl/sql tables for the below query to incresing the performance.
DECLARE
    TYPE cur_typ IS REF CURSOR;
    c           cur_typ;
    total_val varchar2(1000);
    sql_stmt varchar2(1000);
    freeform_name NUMBER;
    freeform_id NUMBER;
    imgname_rec EMC_FTW_PREVA.EMC_Image_C_Mungo%rowtype;
    imgval_rec EMC_FTW_PREVA.EMC_Content_C_Mungo%rowtype;
    CURSOR imgname_cur IS
        select * from EMC_FTW_PREVA.EMC_Image_C_Mungo
        where cs_ownerid in (
                    select id from EMC_FTW_PREVA.EMC_Image_C
                    where updateddate > '01-JUN-13'
                    and path is not null
                    and createddate != updateddate)
        and cs_attrid = (select id from EMC_FTW_PREVA.EMC_ATTRIBUTE where name = 'Image_Upload');
BEGIN
    OPEN imgname_cur;
    LOOP
      FETCH imgname_cur INTO imgname_rec;
      EXIT WHEN imgname_cur%NOTFOUND;
      total_val := 'EMC_Image_C_' || imgname_rec.cs_ownerid;
      sql_stmt := 'SELECT instr(textvalue,''' || total_val || '''), cs_ownerid FROM EMC_FTW_PREVA.EMC_Content_C_Mungo a Where cs_attrid = (select id from EMC_FTW_PREVA.EMC_ATTRIBUTE where name = ' || '''' || 'Body_freeform' || '''' || ')';
        OPEN c FOR sql_stmt;
        LOOP
          FETCH c INTO freeform_id,freeform_name;
          EXIT WHEN c%NOTFOUND;
                                  IF freeform_id > 0 THEN
            dbms_output.put_line (imgname_rec.cs_ownerid || ',' || total_val || ',' || freeform_id || ',' || freeform_name);
                                  END IF;
        END LOOP;
        CLOSE c;
   END LOOP;
   CLOSE imgname_cur;
END;
Thanks in Advance.

can you guys suggest me how can I use pl/sql tables for the below query to incresing the performance.
There would be absolutely no point at all in improving the performance of code that has NO benefit.
The only result of executing that code is to possibly produce some lines of output AFTER the entire procedure if finished:
dbms_output.put_line (imgname_rec.cs_ownerid || ',' || total_val || ',' || freeform_id || ',' || freeform_name);
So first you need to explain:
1. what PROBLEM you are trying to solve?
2. why you are trying to use PL/SQL code to solve it.
3. why are you using 'slow by slow' (row by row) processing and then, for each row, opening a new cursor to query more data?
You should be using a single query rather than two nested cursors. But that begs the question of what the code is even supposed to be doing since the only output is going to a memory buffer.

Currency exchange rates table

Hi Experts,
How to maintain curency exchange rate table for INR-GBP
Can you any one elaborate the table urgent basis
Surya

Hi D N,
Thanks for your reply,
my scenario is for offcycle multiple currency payment
we are using US Payroll schema(ctry gpg 10), rates in the currency exchange table is USD to all currencies, my regular pay currency is QAR which is exchange rate is fix all 365 days with USD.
If I want to pay in GBP for the particular employee, need to convert into USD first then QAR, after payroll results the QAR again convert to USD then GBP for transfer into bank account.
Surya

How do I use shipping rate tables on my listing.

Similar Messages

Maybe you are looking for