How do I view a iMessage via the central popup?

Bit of a problem with iMessage.
When someone sends me a message and I am in another app, or on homescreen, it pops up in the middle of the screen. I can see the text and type a reply, but I cannot tap the text to view the thread.
If someone sends me a picture on iMessage, the same happens with the thumbnail of the picture, but I cannot tap the picture to view it in the thread, and in full screen. You have to Close. Then open iMessage.
So how. from that popup of "you have a message.. here it is...", how do I OPEN the message in full?

Firefox has no email features, it is just a web browser.
If you are using a web based email service such as Gmail or Hotmail, you will need to contact the support for the email service to see if they offer the feature that you want. Any email features will be part of the web based email service.

Similar Messages

How do I view my imessages?

how do i view my imessages?

You can see them in the Messages App on your iPhone, iPad, iPod Touch or Mac Computer.

How do i view my imessage text log?

how do i view my imessage text log?

I'm referring to a log that shows the incoming and outgoing numbers of the imessages. Like a phone bill shows for regular text messages. Didn't know if one is available to track messages. Especially ones that have been deleted.

How do I view more pages in the Folio Builder ACV preview?

I created a folio with an article that has two orientations, but when previewing it only shows the first page. How do I view more pages in the Folio Builder ACV preview?

You are viewing some very, very old videos. May I suggest watching my lynda.com course?
http://www.lynda.com/Digital-Publishing-Suite-tutorials/Adobe-Digital-Publishing-Suite-Ess ential-Training/149122-2.html?srchtrk=index:1%0Alinktypeid:2%0Aq:bob%2Blevine%0Apage:1%0As :relevance%0Asa:true%0Aproducttypeid:2
If you don’t have a subscription, this link will get you a one week trial? http://www.lynda.com/trial/boblevine
All that out of the way, clicking preview should take you to the page you’re on but still give you the entire article. Use your mouse to swipe up or down.

How do we view a list of the temporary and free sites we are using?

Adobe Web Host - Free Sites /
How do we view a list of the temporary and free sites we are using?
When logged into Creative Cloud we used to be able to see the temporary and hoe many of the 5 free sites we were using.
Can’t find a list on my Creative Cloud account or when linking to "Manage" from within Muse /
No mention of the free sites in the FAQs. Has there been a policy change ? Are free sites still included in the Subscription ?
// from - Adobe Muse Help | Adobe Muse / Common Questions //
When I publish in Adobe Muse CC, do I have to pay for hosting with Adobe?
Adobe Muse CC allows you to publish your temporary website on the Adobe hosting platform at no charge for a 30-day trial period. This gives you the opportunity to send a live URL to your client for review. All sites in trial mode with Adobe will include the domain “businesscatalyst.com” in it. If you decide to take the site live by paying for the monthly hosting, you can transfer your own domain and remove the businesscatalyst.com subdomain. Or you can export the HTML and host the final site with a hosting provider of your choice.

Yeah, not sure why they took it out of the cloud interface.
But if you go to http://www.businesscatalyst.com/partnerportal and login with your cloud ID you will have access to all your cloud sites and many other features.

How do I view a website over the full screen while using the 6 plus in horizontal mode

How do I view a website over the full screen while using the iPhone 6 plus in horizontal mod?

You said you found several domain.sites files.
iWeb uses one at a time to create webpages.
Your webpages, your site, has disappeared with MobileMe.
You have to find a new host and publish there.
But to publish you need one of your domain files.
Try iWebSites to open them :
http://www.wyodor.net/_Demo/Aptana/iWebSites.html

HT201077 How do I view photos saved to "the cloud" that are not in my latest thousand??

How do I view photos held "on the cloud" that have dropped off the phone, ie, are not in the latest 1000 stored.
I cannot seem to find this "cloud"!

hi guys thank you for the replies, sorry I have been away.
I am confused then - I have had to buy more icloud memory recently (2 of us use it with phones etc and so share pics, music) but I thought this was because its saving more photos?
So no idea why I have to buy storage if you now say photos arent saved?
If gone from the last 1000 they are lost? I dont have a Mac just iphone/ipad.
Sorry if Im getting it wrong!

Define adobe reader 11 protected view privileged locations via the registry

Is it possible to define adobe reader 11 protected view privileged locations via the registry?
I need to add the folder path our docuemnt managment system uses for its temp directory.
Thanks

I modified the transform file I use to deploy reader via group policy with the adobe customization wizard and specified the desired privileged locations.
I then did a test deploy of reader to a workstation and adobe reader 11.0.02 was installed. None of the privileged locations I defined in the transform are showing up as being defined in the GUI and they are not in the registry @ HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\11.0\TrustManager\cTrustedFolders I used filemon to figure out where reader was writing to in the registry.
I don’t know if there are issues with certain parts of the transform being ignored when installing the software. I have noticed that if I install adobe reader via the command line and apply the transform, the installer completely ignores the transform but gives no errors.

How do you view duplicate songs on the new iTunes?

How do you view duplicate songs on the new iTunes?

Hi,
From view menu, you can select show duplicate item. If you hold option key whilst selecting view menu, show exact duplicates becomes available.
Jim

HT4314 How do you view your profile on the updated version on game center

How do i view my profile in the game center

Hi,
Open the Game Center app, and tap on the left button Me
Hope that helps

How can I view a video with the extension .wlmp?

How can I view a video with the extension .wlmp?

Nevermind. Found wlmp reference elsewhere in these discussions.

How to get a scroll bar to the applications popup by default?

How to get a scroll bar to the applications popup by default when clicked the applications folder from the dock? If I have so many applications that they do not fit in the default area, I have to find out myselft that I have to scroll the content before the scroll bar appears. This leads to "where is my missing applications questions" by the novice users with Mountain Lion.

System Preferences > General > Show scroll bars.
Click the button by the side of "Always".
Best.

A question viewing certifcate information via the padlock symbol in IE 11 (works on Chrome brower)

Hello All
Can someone please help me with the following questions,
J
1:
I have a CA whose CA certificate has an Issuance (aka certificate) Policy.
Next I created a CSR for a WEBServer certificate, I created the CSR by first creating a .inf (request file) containing the usual including the following
[RequestAttributes]
CertificateTemplate=WebServer
OID=1.3.6.1.5.5.7.3.1
IssuancePolicy="My Certificate Policy"
OID=1.3.6.1.4.145389.1.1.1
Turned the above into a CSR (base64 encoded) then submitted and retrieved the relevant certificate from the CA
If I open the certificate flat file the resultant certificate has the relevant Issuance Policy listed under the section
‘This certificate is intended for the following purposes’
So all good so far
Next I install the certificate to the WEB Site and bind it etc. When I go the WEB Site e.g.
Https://TestSite the certificate works and the traffic is encrypted etc… e.g. click on the padlock in Internet Explorer provides the expected information, but when I click on View Certificate via this padlock symbol; in Internet
Explorer the certificate come up OK but under
‘This certificate is intended for the following purposes’
It does not show my issuance policy e.g. just the standard application policy for a WEBServer cert.
If I then look under the details/extensions tab of the certificate it does show certificate policy under the certificate policies extension, so looks OK from the extensions tab, but policy does not show up under ‘This certificate is intended for the following
purposes’ when certificate is viewed via padlock on IE but does show up if I open the certificate flat file (either original certificate file or copy to file then view certificate as a flat file).
The OID for the policy is registered in both active directory and local OID databases.
So the question is why do I not see the issuance policy when viewing cert via padlock in IE but does when viewing flat file.
I am using IE 11.x
When doing the same thing from Chrome browser the certificate policy does show up OK, therefore is this a possible bug with IE 11.x
Thanks All
AAnotherUser__
AAnotherUser__

Hello Brian
Thanks for the reply,
The OID is in the Issuing CA Certificate (online CA) e.g. was part of the CAPolicy.inf file when installing the Issuing CA. The OffLine Root and OffLine Policy CA have the All Issuance Policy set in their CA Certificates.
briefly as mentioned above when opening the cert (.cer) as a flat file by double clicking on it you can see the Issuance Policy listed as expected. When viewing the same cert via Internet Explorer (v11.x) PadLock > View Certificate it shows the Application
Policy, but not the Issuance Policy (e.g. in the general tab) but does show the Issuance Policy under Extensions Tab. If I use Chrome, click on the PadLock > View Certificate it does show the Issuance Policy (as it always does when opening the flat
file).
Therefore was kind of wondering if a Bug in IE, when doing a CertUtil -f -urlfetch -verify Cert.Cer it passed all tests and shows it was validated against the Issuance Policy OK, therefore perhaps bug in IE
No big deal, just wanted to know if any one else saw this or was another explanation
Thank you
AAnotherUser__
AAnotherUser__

How to set a system property via the config tool?

Hello,
how can I set a system property via the config tool? Before I chose WAS from SAP I used java with option -D<name>=<value> to set the system properties.
Very much thanks in advance.
Regards
Carsten

Hi Carsten,
WAS config tool is located under
e.g. usr\sap\J2E\JC00\j2ee\configtool
start configtool.bat
there will be opened a configuration tool GUI
Click on the instance_ID.... leaf of the tree in the left pane and then on the server_ID.... leaf.
Java settings will appear in the right pane after this steps.
Best Regards,
Violeta

How to initialize consumer from supplier via the command line ?

We have a small directory that gets loaded from scratch every night.
We also setted up replication to a couple of consumers (read only).
The problem is that since the data is loaded everynight, we get compliants in logs "Replica has a different generation ID than local database"
I can initialize the consumers via the gui. But how to do it from the command line from the master ? I know that an option is to do a db2ldif and then an ldif2db on the consumer but it's not an option for us.
I also tried setting the nsds5beginreplicarefresh to start, but that doesn't seem to do a full init.
There must be a way, as the gui actually does it.
TIA

Basically it's very simple. Supposing your replication is already setup and you reload data to your master. If you want the initialization pushed to all the replicas automatically, you can simply setup a flag in all the agreements. This flag is called nsDS5BeginReplicaRefresh.
Please check the link:
http://docs.sun.com/source/816-6699-10/confattr.html#18194
nsDS5BeginReplicaRefresh
Allows you to initialize a replica. This attribute is absent by default. However, if you add this attribute with a value of start, the server reinitializes the replica and removes the attribute value.
Property
Value
Entry DN
cn=ReplicationAgreementName,cn=replica,cn="suffixName",
cn=mapping tree,cn=config
Valid Range
stop | start
Default Value
N/A
Syntax
DirectoryString
Example
nsDS5BeginReplicaRefresh: start
Please note that this value is absent by default and will disappear whenever initialization to replica finished. Next time whenever you want it to happen again, use ldapmodify to set this flag up.
Also, if you want this happen to all the master's replicas, you have to setup for all the agreements.
I already tested and it turns out very magic.
So what you should do is whenver your master get reloaded, when it gets finished, call ldapmodify to set the attribute to be "start".
Hope it helps!

How do I view a iMessage via the central popup?

Similar Messages

Maybe you are looking for