How do I view JNDI in weblogic's server console?

I'm using the jsp admin servlets but I don't see anyway to view JNDI. How's
that done?

Just go to console, click on servers, then click on your server(myserver), then
on the right side click on 'Monitoring' Tab,
then you will see in the bottom a link to 'View JNDI Tree'. This should show you
all the JNDI bindings.
Regards
John
"Robert Nicholson" <[email protected]> wrote:
I'm using the jsp admin servlets but I don't see anyway to view JNDI.
How's
that done?

Similar Messages

  • Administrator Login & Issue with Weblogic Admin Server Console

    I recently applied a PeopleTools patch to a test environment. I will be doing this to production soon, and as I was going through my screenshots of what I did in test, I ran across an area that may cause me an issue when I apply it to production.
    There is a screen which prompts you for the administrator login and password for the weblogic domain. I wasn't sure of this when I did it in test, but in the PeopleTools install doc, it said the default is system/Passw0rd
    This worked fine in test. However, the person who set this up in production may have used a different password. I don't want to get halfway through the patch and have to abort because I don't know the password.
    I did some research and read there was a file with this info. I think it was boot.properties, but it was encrypted.
    I then started the Weblogic Admin Server Console in test and was able to login with system/Passsw0rd so that verified a way of confirming the password in test.
    I tried to do the same in production, but the Weblogic Admin Server Console page does not come up. The webserver is running, and if it wasn't, my phone would be ringing. Why does the console not come up?
    However, the screen that comes up during the patch that prompts you for this asks you to enter your password, and re-enter it on the next line, so maybe its setting the password, not verifying that you know it. Is this true, I could make it whatever I want?
    The WebLogicAdmin_weblogic.log file has not been updated in months. This may have been when we did the last upgrade.
    Can you tell me how to determine/verify this password?
    Thanks,
    Roger

    I'm not sure if there's an easy way to verify this. If I'm not mistaken you'll have batch file called startweblogicadmin.bat in the bin directory. You have to start this to get the administrator console running. It will be running on port :9999 by default if you haven't changed this.

  • How to start oracle Jdeveloper 11g Weblogic Admin Server

    Hi Every one
    Can any one help me in starting the Oracle Jdeveloper 11g weblogic admin server. There is option to start the admin server while configuring the new domain, but after that if we need to start the same domain I didn't find any option in 11g. Can any one help me in this regard
    Thanks

    Janilson wrote:
    I don't know which oracle version you are using but, I use the Express version (Oracle-xe)
    In order to configure it I run
    sudo /etc/rc.d/oracle-xe configure
    After configure oracle, I start oracle service
    sudo /etc/rc.d/oracle-xe start
    I don't know if it helps sad
    I don't see any thing in rc.d. I use systemctl to start daemons.
    stee1rat wrote:What command do you use to run it? And what are your environment variables?
    lsnrctl start

  • Cannot access weblogic admin server console

    All,
    I am not able to access https://<myhostname>:7001/console URL after sucessfull installation of web logic server on linux. During installation I also created base_domain.
    Here is the log during the AdminServer startup :-
    <Oct 4, 2009 9:02:02 AM PDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    <Oct 4, 2009 9:02:02 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Oct 4, 2009 9:02:02 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <Oct 4, 2009 9:02:03 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:20c:29ff:fe28:8f5b:7001 for protocols iiop, t3, ldap, snmp, http.>
    <Oct 4, 2009 9:02:03 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.119.129:7001 for protocols iiop, t3, ldap, snmp, http.>
    <Oct 4, 2009 9:02:03 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
    <Oct 4, 2009 9:02:03 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 0:0:0:0:0:0:0:1:7001 for protocols iiop, t3, ldap, snmp, http.>
    <Oct 4, 2009 9:02:03 AM PDT> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "AdminServer" for domain "base_domain" running in Production Mode>
    <Oct 4, 2009 9:02:03 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <Oct 4, 2009 9:02:03 AM PDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    From the above it looks like there was no issue in starting up the admin server. But when I try to access the weblogic admin server url, it does not show up.
    Can you please help me to resolve the issue if any so that I can access the admin console?
    THanks,
    Amit

    hey, same here...
    this is what i get when starting up the console
    <May 4, 2010 12:52:51 PM WIT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    <May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <May 4, 2010 12:52:51 PM WIT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on xxx.xxx.xxx.xxx:7777 for protocols iiop, t3, ldap, snmp, http.>
    <May 4, 2010 12:52:51 PM WIT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7777 for protocols iiop, t3, ldap, snmp, http.>
    <May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "AdminServer" for domain "xxxxxDomain" running in Production Mode>
    <May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    but when i go to the browser
    http://xx.xx.xx.xx:7777/console..
    Error 404--Not Found
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    xx.xx.xx 404 Not Found
    The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
    If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
    i still try to fix this..

  • How to use RDBMS Realm in Weblogic Commerce Server?

    Hi All,
    Same as the subject.
    Thx
    Ray

    You should read the security information in the Servlet 2.2 specification
    that WL 5.1 implements:
    http://java.sun.com/products/servlet/download.html
    Chapter 11 deals with declarative and programmatic security, and includes a
    section on roles:
    11.4 Roles
    A role is an abstract logical grouping of users that is defined by the
    Application Developer or
    Assembler. When the application is deployed, these roles are mapped by a
    Deployer to security
    identities, such as principals or groups, in the runtime environment.
    A servlet container enforces declarative or programmatic security for the
    principal associated with
    an incoming request based on the security attributes of that calling
    principal. For example,
    1. When a deployer has mapped a security role to a user group in the
    operational environment. The
    user group to which the calling principal belongs is retrieved from its
    security attributes. If the
    principal's user group matches the user group in the operational environment
    that the security
    role has been mapped to, the principal is in the security role.
    2. When a deployer has mapped a security role to a principal name in a
    security policy domain, the
    principal name of the calling principal is retrieved from its security
    attributes. If the principal is
    the same as the principal to which the security role was mapped, the calling
    principal is in the
    security role.
    Cameron Purdy
    http://www.tangosol.com
    "Hari" <[email protected]> wrote in message
    news:[email protected]..
    Hello Gurus,
    I am new to Weblogic server and I am trying to investigate how to make
    use of security roles in weblogic server (5.1.0). Can anyone point me
    to some documentation. Specifically, I am looking for instance level,
    and method level security and how to use it.
    Thanks for taking your time to read this e-mail.
    Thank You all in advance,
    Hari.

  • WebLogic Admin Server Console: Is it secure?

    Hello,
    I've attended both WebLogic classes (Basic and Advanced) and have never heard my instructor state that the Admin console is unsecure as opposed to WLST. I asked spcifically durin the Advanced class about this and was told all that was needed was to change the console name and port.
    Another indiviudal who attended the first class with a different instructor told me his told him the console was not secure because everybody would have access to the console and could make changes, and that a lot of companies were not using it according to blogs.
    The problem is he is telling a lot of people this, when I don't believe it.
    Whose right?
    Thanks

    Hi,
    You are right. You need to provide a user name and a password to access the Console so it is secure.
    Default SSL is not used so some might argue the it is not secure since user name and password is send in clear text and can be sniffed. But in most situation the Weblogic installation are placed in a special network segment with a DMZ in front of it so I don't see the need for using SSL. But if needed you can just enable SSL for the Console and then it is more secure.
    Also using the default port is fine since you have to provide a user name and password. On production systems I tend to not use weblogic as the default administrator user name. Then a hacker has to not only guss the password but also the user name.
    Regards Peter Lorenzen
    Edited by: Peter Lorenzen on Jun 21, 2011 4:17 AM

  • How to configure ftpadapter JNDI in server Console for oracle soa suite 11g

    Hi All,
    I need to configure a ftp adapter in one of my bpel process. Could any one guide me pleas ,how to do FTP adapter jndi configure in admin server console?
    Thank you.
    Regards,
    Satish

    http://www.oracle.com/technology/architect/soa-suite-series/dynamic_endpoints.html
    Configuring the End Point Properties for an Adapter through Oracle Enterprise Manager
    does that help ?

  • How to configure User domain in Weblogic..........

    How to configure User domain in Weblogic Application Server 8.1 from Command prompt on windows Xp?
    Thanks in Advance.

    <p>
    You can use WLST or weblogic.Admin command. WLST is the recommended appraoch. Here are a few links for both of the above:
    </p>
    <p>
    http://edocs.bea.com/wls/docs81/admin_ref/cli.html
    http://e-docs.bea.com/wls/docs91/config_scripting/using_WLST.html
    http://edocs.bea.com/wls/docs90/config_scripting/domains.html
    http://dev2dev.bea.com/blog/hoos/archive/2005/09/what_no_wlst_1.html
    http://dev2dev.bea.com/pub/a/2005/01/wlst_offline.html
    http://dev2dev.bea.com/blog/hoos/archive/2005/10/environment_pro_1.html
    </p>
    <p>
    Hussein Badakhchani
    London Middleware
    </p>
    Edited by hoos at 01/07/2007 3:50 AM
    Edited by hoos at 01/07/2007 3:51 AM

  • Meta tag using weblogic content management console

    Hi..
    I want to add meta tag content to pages. How can I do this using weblogic content management console?
    please help......
    Edited by: 925203 on Apr 25, 2012 3:58 AM

    Hi!
    I do the following: In file framework/skeletons/bighorn/head.jsp or skeletons orther, include
    <skeleton:context type="headpc">
            <head>
                 <skeleton:contentTypeMeta/>
                 <jsp:include page="metadata.jsp" flush="true"></jsp:include>
                 <skeleton:children/>
            </head>
    </skeleton:context>Hopefully this will help you
    Thanks!

  • Cloned OMS - WebLogic Admin Server not available....

    Greetings,
    We are working our way through an active active R4 OMS setup, and we just successfully cloned oms1 to oms2 via cloud control, and executed the post install steps. We now need to access each of the OMSs WebLogic Admin Server Console to confirm LDAP settings, and the oms2 WebLogic Admin Server Console is unavailable. The oms2 clone has the same WebLogic Admin Server details as oms1 (see below).
    Is that by design, i.e. only one WebLogic Admin Server Console with two load balanced OMSs?
    Which files do we need to edit on oms2 to get oms2's WebLogic Admin Server on-line?
    oms1:
    /u01/app/oracle/product/middleware_r4/oms/bin/emctl status oms -details
    WLS Domain Information
    Domain Name            : GCDomain
    Admin Server Host      : oms1.mastec.com
    Admin Server HTTPS Port: 7102
    Admin Server is RUNNING
    oms2:
    WLS Domain Information
    Domain Name            : GCDomain
    Admin Server Host      : oms1.mastec.com
    Admin Server HTTPS Port: 7102
    Thank you,

    The WLS admin server only exists on the first OMS host. Usually an SLB is used for load balancing.
    For information on HA (High Availability) solutions, see:
    http://docs.oracle.com/cd/E24628_01/install.121/e24089/ha_intro.htm#EMADV9611
    Regards,
    - Loc

  • Weblogic app server will not start

    When trying to restart weblogic app server console after shutdown it suddenly gives the following error. And console hangs. Any suggestions to what has happened ? It is on a development server.
    ####<May 1, 2015 5:29:52 PM CEST> <Warning> <netuix> <demnet21> <app_as_u_dom02> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <IBM-1540> <> <> <1430494192195> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=UnexpectedExceptionPage.>
    ####<May 1, 2015 5:29:52 PM CEST> <Error> <Console> <demnet21> <app_as_u_dom02> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <IBM-1540> <> <> <1430494192290> <BEA-240003> <Console encountered the following error Unexpected exception occured in page flow request processor:
    weblogic.management.NoAccessRuntimeException: Access not allowed for subject: principals=[], on ResourceType: weblogic.management.mbeanservers.edit.ConfigurationManagerMBean Action: execute, Target: startEdit
            at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:206)
            at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:222)
            at javax.management.remote.rmi.RMIConnectionImpl_1036_WLStub.invoke(Unknown Source)
            at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:1033)
            at weblogic.management.jmx.MBeanServerInvocationHandler.doInvoke(MBeanServerInvocationHandler.java:544)

    The Windows Security Policies required for starting Tuxedo Domains as a service are:
    1.  Log on as service
    2.  Act as part of the operating system
    3.  Replace process level token
    4.  Increase quotas
    Please add these policies to the Local Admin or Network Admin account created for the Oracle Proc Manager and PeopleSoft user ids. This information is from the Km Doc:  E-TUXEDO: Unable to Start Domains on Windows Server As a Service (Doc ID 1623062.1)

  • How to deply ADF application on weblogic 10.3

    Hello Team,
    Here i created one aplpication using jdevloper 11.1.1.1.0
    I have Model Part & View Controller How can i deploy aaplication on weblogic. I aslo follow the steps which are defines in the *"Fusion Developer’s Guide for Oracle Application Development Framework"* but still i am facing the problem in deployment i.e. deployment incomplete.....
    1) first i created the dataSourse on weblogic
    2) then i gave the dataSourse path to the Application Module
    3) then i created the WAR file in viewController
    4) then i create the EAR file
    then i deplying application to weblogic....
    Is i am going in right direction?

    yes i tryed but still i uable to deploy the application....
    now m facing this error....
    "The task cannot be processed further until the current edit session is activated. When this occurs, task processing will continue. The user can exit the deployer tool without affecting the task."

  • Managed Server unreached after view JNDI tree

    I have issue with WLS managed server to see if anyone know that
    Version WLS 10.3.1.0
    I create 11G soa domain , soa_server1 as managed server .
    When I open JNDI tree window of soa_server1 , I can see some error mark in eis node , when I close it . I am never able to see the view JNDI tree link ,and state of soa_server1 change to UNKNOW. actually soa_server1 still working
    Again , try to use WSLT to browse JNDI of soa_server1
    got this exception:
    Caused by: java.rmi.UnmarshalException: Problem finding error class; nested exception is:
    java.lang.ClassNotFoundException: oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter
    at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
    at weblogic.jndi.internal.ServerNamingNode_1031_WLStub.list(Unknown Source)
    at weblogic.jndi.internal.WLContextImpl.list(WLContextImpl.java:217)
    ... 35 more
    Caused by: java.lang.ClassNotFoundException: oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter
    at weblogic.utils.classloaders.GenericClassLoader.checkMagicNumber(GenericClassLoader.java:432)
    at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:336)
    at weblogic.rmi.utils.WLRMIClassLoaderDelegate.loadClass(WLRMIClassLoaderDelegate.java:215)
    at weblogic.rmi.utils.WLRMIClassLoaderDelegate.loadClass(WLRMIClassLoaderDelegate.java:135)
    at weblogic.rmi.utils.Utilities.loadClass(Utilities.java:306)
    Any clue?
    Kevin
    Edited by: kyi on Oct 23, 2009 12:14 PM

    Hi Kyi,
    Can you check if that class had been loaded successfully?.
    For JRocket :- add "-Xverbose:class,load -Xverboselog:classload.txt" to JVM options.
    For Sun :- add "-verbose:class" to JVM options.
    Thanks.
    Vijay Bheemineni.

  • How can I view as "single page continuous" in full screen mode?

    how can I view as "single page continuous" in full screen mode?
    preferences->page display:
    preference->accessbility:

    Not possible.

  • How can I view the USMT recovery key in SQL report

    Hello all,
    Can anyone help me to provide sql query for below link… What I am looking is Just to create a report with all computers that has computer association any type with the recovery key information.
    http://www.windows-noob.com/forums/index.php?/topic/1763-how-can-i-view-the-usmt-recovery-key/
    I have tried below but not working so looking for help…..
    SELECT     TOP (100) PERCENT dbo.v_StateMigration.SourceName, dbo.v_StateMigration.SiteCode, dbo.v_StateMigration.SMPServerName, 
                          dbo.v_StateMigration.SourceMACAddresses, dbo.v_StateMigration.RestoreMACAddresses, dbo.StateMigration.StateEncryptDecryptKey, 
                          dbo.StateMigration.StorePath, dbo.StateMigration.StoreSize
    FROM         dbo.StateMigration INNER JOIN
                          dbo.v_StateMigration ON dbo.StateMigration.SMPServerName = dbo.v_StateMigration.SMPServerName CROSS JOIN
                          dbo.v_UserStateMigration
    WHERE     (dbo.StateMigration.StorePath IS NOT NULL) AND (dbo.StateMigration.StoreSize IS NOT NULL)
    ORDER BY dbo.v_StateMigration.SourceName

    Try this.
    SELECT Distinct
    SM.SourceName,
    SM.SiteCode,
    SM.SMPServerName,
    SM.SourceMACAddresses,
    SM.RestoreMACAddresses,
    SMT.StateEncryptDecryptKey,
    SM.StorePath,
    SM.StoreSize
    FROM
    dbo.v_StateMigration SM
    JOIN dbo.v_UserStateMigration UM on SM.RestoreClientResourceID= UM.RestoreClientResourceID
    join dbo.StateMigration SMT on SM.SMPServerName = SMT.SMPServerName
    WHERE
    (SM.StorePath IS NOT NULL)
    AND (SM.StoreSize IS NOT NULL)
    ORDER BY
    SM.SourceName
    http://www.enhansoft.com/

Maybe you are looking for