How do retrieve the contents from a DataTable?
I have a DataTable filled with the contents of an Excel spreadsheet.
DataTable dtDataTable = new DataTable();
using (OleDbDataAdapter oledbAdapter = new OleDbDataAdapter(oledbCmd))
oledbAdapter.Fill(dtDataTable);
How do retrieve the contents from the DataTable? ... one value at a time (for example row 3, column 5).
bhs67
This works:
string stData = dtDataTable.Rows[3].ItemArray[5].ToString();
bhs67
Similar Messages
-
How to retrieve the content of the indexed column
In Oracle UltraSearch, how to retrieve the content of the file in the indexed column cache_file_path.
we try the flowing sql
SELECT cache_file_path FROM mytable
WHERE contains (mytable.cache_file_path, 'viet', 1) > 0
but we only have the cache_file_path column, not the content of the file were indexed.I think this is what you're looking for:
DECLARE @table TABLE (amountPaid FLOAT, datePaid DATE, memberID INT)
INSERT INTO @table (amountPaid, datePaid, memberID) VALUES
(10.00, '2014-01-01',1),(10.00, '2014-02-01',2),(10.00, '2014-03-01',3),(10.00, '2014-04-01',4),(10.00, '2014-05-01',5),(10.00, '2014-06-01',6),(10.00, '2014-07-01',7),(10.00, '2014-08-01',8),(10.00, '2014-01-01',9),(10.00, '2014-10-01',10)
SELECT *
FROM (
SELECT *, SUM(amountPaid) OVER (ORDER BY datePaid ROWS UNBOUNDED PRECEDING) AS runningTotal, ((SELECT SUM(amountPaid) FROM @table) / 100) * 50 AS percentileAmount
FROM @table
) x
WHERE percentileAmount >= runningTotal
It depends upon SQL Server 2012's windowed functions. It would be possible to also do this with a rCTE in earlier versions.
Giving your code an eyball, I think I see what it's doing. Unfortunately, I'm stuck using 2008 R2, so I don't have access to UNBOUNDED or PRECEDING. I'll have to research rCTE - I know what a CTE is, but not the 'r' prefix. -
How to retrieve the values from a table if they differ in Unit of Measure
How to retrieve the values from a table if they differ in Unit of Measure?
If no data is read
- Insure that you use internal code in SELECT statement, check via SE16 desactivating conversion exit on table T006A. ([ref|http://help.sap.com/saphelp_nw70/helpdata/en/2a/fa0122493111d182b70000e829fbfe/frameset.htm])
If no quanity in result internal table
- There is no adqntp field in the internal table, so no quantity is copied in itab ([ref|http://help.sap.com /abapdocu_70/en/ABAPINTO_CLAUSE.htm#&ABAP_ALTERNATIVE_1@1@]).
- - Remove the CORRESPONDING, so quantity will fill the first field adqntp1. ([ref|http://help.sap.com/abapdocu_70/en/ABENOPEN_SQL_WA.htm])
- - Then loop at the internal table and move the quantity when necessary to the 2 other fields.
* Fill the internal table
SELECT msehi adqntp
INTO TABLE internal table
FROM lipso2
WHERE vbeln = wrk_doc1
AND msehi IN ('KL','K15','MT').
* If required move the read quantity in the appropriate column.
LOOP AT internal_table ASSIGNING <fs>.
CASE <fs>-msehi.
WHEN 'K15'.
<fs>-adqnt2 = <fs>-adqnt1.
CLEAR <fs>-adqnt1.
WHEN 'MT'.
<fs>-adqnt3 = <fs>-adqnt1.
CLEAR <fs>-adqnt1.
ENDCASE.
ENDLOOP.
- You could also create another table with only fields msehi and adqntp and then collect ([ref|http://help.sap.com/abapdocu_70/en/ABAPCOLLECT.htm]) the data to another table.
Regards,
Raymond -
How to retrieve the data from SAP-BAPI by using VB Code
Hi ,
I am new to BAPI.
V have created an application in Visual Basic with the following fields
EmpNo , EmpName, Addr1, Addr2, City and Phone (Only for Test)
We have written the code for SAVING the data into SAP. Already we have
constructed a table with the respective fields in SAP.
For that we ourself created our own BAPI Structure / Function Group /
Function Module/ Business Object - RELEASED related elements.
1)Established the connection successfully.
2)Stored the data into SAP Successfully and v r in need of
3)HOW TO RETRIEVE THE DATA FROM SAP (USING GETLIST.....GETDETAIL....)
Following is the code :
'BAPI Structure : ZBAPIEMP
'Function Group : ZBAPIEMP
'Function Module : ZBAPI_EMP_CREATEFROMDATA
'Business Object : ZBAPIEMP
'Function Module : ZBAPI_EMP_GETLIST
Dim bapictrl As Object
Dim oconnection As Object
Dim boEmp As Object
Dim oZEmp_Header As Object
Dim oImpStruct As Object
Dim oExpStruct As Object
Dim oreturn As Object
Dim x As String
Private Sub Form_Load()
Set bapictrl = CreateObject("SAP.BAPI.1")
Set oconnection = bapictrl.Connection
oconnection.logon
Set boEmp = bapictrl.GetSAPObject("ZBAPIEMP")
Set oZEmp_Header = bapictrl.DimAs(boEmp, "CreateFromData", "EmployeeHeader")
Set oImpStruct = bapictrl.DimAs(boEmp, "GetList", "EmployeeDispStruct")
End Sub
Private Sub cmdSave_Click()
oZEmp_Header.Value("EMPNO") = txtEmpNo.Text
oZEmp_Header.Value("EMPNAME") = txtEmpName.Text
oZEmp_Header.Value("ADDR1") = txtAddr1.Text
oZEmp_Header.Value("ADDR2") = txtAddr2.Text
oZEmp_Header.Value("CITY") = txtCity.Text
oZEmp_Header.Value("PHONE") = txtPhone.Text
boEmp.CreateFromData EmployeeHeader:=oZEmp_Header, Return:=oreturn
x = oreturn.Value("Message")
If x = "" Then
MsgBox "Transaction Completed!..."
Else
MsgBox x
End If
End Sub
Private Sub cmdView_Click()
End Sub
COULD ANYBODY GUIDE ME, HOW TO RETRIEVE THE DATA FROM BAPI, FOR THE WRITTEN CODE.I didn't seen any other answers but here's how it's been done previously in our organization for a custom BAPI. In this example, we give material and language to return the part description. It's not specific to your project but may give you ideas..
-Tim
Option Compare Database
Dim SAPLOGIN As Boolean
Dim FunctionCtrl As Object
Dim SapConnection As Object
Sub SAPLOGOUT()
On Error GoTo LogoutFehler
SapConnection.logoff
SAPLOGIN = False
Exit Sub
LogoutFehler:
If Err.Number = 91 Then
Exit Sub
Else
MsgBox Err.Description, vbCritical, "Fehler-Nr." & CStr(Err.Number) & " bei SAP-Logout"
End If
End Sub
Function SAPLOG() As Boolean
'Verbindungsobjekt setzen (Property von FunctionCtrl)
Set FunctionCtrl = CreateObject("SAP.Functions")
Set SapConnection = FunctionCtrl.Connection
'Logon mit Initialwerten
SapConnection.Client = "010"
SapConnection.Language = "EN"
SapConnection.System = "PR1"
SapConnection.SystemNumber = "00"
'SapConnection.Password = ""
SapConnection.GroupName = "PR1"
SapConnection.HostName = "168.9.25.120"
SapConnection.MessageServer = "168.9.25.120"
If SapConnection.Logon(0, False) <> True Then 'Logon mit Dialog
Set SapConnection = Nothing
DoCmd.Hourglass False
MsgBox "No connection to SAP R/3 !"
SAPLOGIN = False
SAPLOG = False
Exit Function
End If
SAPLOG = True
End Function
Function MatDescr(MatNr As String)
Dim func1 As Object
Dim row As Object, X As Integer, ErsteNr As String
Dim DatensatzZähler As Long
Dim RowField(1 To 50, 0 To 1) As String, RowLine As Long
If Not SAPLOGIN Then
If Not SAPLOG() Then
MsgBox "No connection to SAP !", 16
SAPLOGOUT
Exit Function
End If
End If
' Instanziieren des Function-Objektes
Set func1 = FunctionCtrl.Add("Z_BAPI_READ_MAKT")
' Export-Paramter definieren
func1.exports("MATNR") = MatNr
func1.exports("SPRAS") = "EN"
DoEvents
If Not func1.call Then
If func1.exception <> "" Then
MsgBox "Communication Error with RFC " & func1.exception
End If
DoCmd.Hourglass False
SAPLOGOUT
Exit Function
Else
MatDescr = func1.imports("MAKTX")
End If
If MatDescr = "" Then
MatDescr = "PART NO. NOT FOUND"
End If
End Function -
How to Retrive the content from Archive folder ???
Hi,
1. I was working on the archiving of the documents and was able to archive the docs into a local archive folder.
Then I had to test a scenario where when the user wants to search for a document with a specific ContentId, if the ContentId was not present in the content repository, then the content manager has to search for the same in the archived documents. Is this achievable?
While testing the above, the UCM server had stopped indexing and started giving a Interrupted exception for indexing. While we do a normal checkin also the documents are in DONE status and are not getting published. Tried restarting the indexer also but in vain. How can we restart the indexing so as to publish the docs?
2. indexing not working even for normal checkin the content.its showing error "indexing aborted" ? content never gets released after checkedin the content ? its struch in done status ?
while importing the content to ucm serverl, i have deleted "testarchive " (which was exported from contentserver) from Archive folder in UCM install directory.. then many contents were in done status at contentmanagement-> workin progress. Errors showing in content server ...
Indexing aborted. Error: Directory 'C:/UCM/archives/testacrchive' does not exist. Directory 'C:/UCM/archives/testacrchive' does not exist. [ Details ]
An error has occurred. The stack trace below shows more information.
!csIndexerAbortedMsg!syGeneralError!syFileUtilsDirNotFound,C:/UCM/archives/testacrchive!syFileUtilsDirNotFound,C:/UCM/archives/testacrchive
intradoc.common.ServiceException: !syGeneralError
at intradoc.common.FileUtils.testFileSystem(FileUtils.java:452)
at intradoc.server.archive.ArchiveUtils.readFileEx(ArchiveUtils.java:215)
at intradoc.server.archive.ArchiveUtils.readFile(ArchiveUtils.java:193)
at intradoc.server.archive.ArchiveUtils.readArchiveFile(ArchiveUtils.java:158)
at intradoc.server.IndexerReplication.readArchiveProperties(IndexerReplication.java:279)
at intradoc.server.IndexerReplication.doReplication(IndexerReplication.java:156)
at intradoc.server.IndexerReplication.doWork(IndexerReplication.java:92)
at intradoc.indexer.Indexer.doIndexing(Indexer.java:431)
at intradoc.indexer.Indexer.buildIndex(Indexer.java:340)
at intradoc.server.IndexerMonitor.doIndexing(IndexerMonitor.java:1012)
at intradoc.server.IndexerMonitor$4.run(IndexerMonitor.java:832)
Caused by: intradoc.common.ServiceException: !syFileUtilsDirNotFound,C:/UCM/archives/testacrchive!syFileUtilsDirNotFound,C:/UCM/archives/testacrchive
at intradoc.common.FileUtils.validatePath(FileUtils.java:801)
at intradoc.common.FileUtils.validateDirectory(FileUtils.java:781)
at intradoc.common.FileUtils.testFileSystem(FileUtils.java:437)
... 10 more
Error showing in Archive logs
Instance idc with archive testAcrchive is no longer being exported. Exception type is 'java.lang.Throwable'. [ Details ]
An error has occurred. The stack trace below shows more information.
!csReplicationInstanceRemoved,idc,testAcrchive!syExceptionType,java.lang.Throwable
java.lang.Throwable
at intradoc.common.IdcLogWriter.doMessageAppend(IdcLogWriter.java:81)
at intradoc.common.Log.addMessage(Log.java:268)
at intradoc.common.Log.errorEx2(Log.java:216)
at intradoc.common.LoggingUtils.logMessage(LoggingUtils.java:97)
at intradoc.common.SystemUtils.reportErrorEx(SystemUtils.java:462)
at intradoc.common.SystemUtils.errEx(SystemUtils.java:547)
at intradoc.server.IndexerReplication.doExport(IndexerReplication.java:196)
at intradoc.server.IndexerReplication.doReplication(IndexerReplication.java:169)
at intradoc.server.IndexerReplication.doWork(IndexerReplication.java:92)
at intradoc.indexer.Indexer.doIndexing(Indexer.java:431)
at intradoc.indexer.Indexer.buildIndex(Indexer.java:340)
at intradoc.server.IndexerMonitor.doIndexing(IndexerMonitor.java:1012)
at intradoc.server.IndexerMonitor$4.run(IndexerMonitor.java:832)
Please resove the above issues,
Please helpme out... this is pretty urgent as i am strucked at my work ? how to get relase the content ?
thanks inadvance.
Thanks,
yt
Edited by: 792821 on Oct 28, 2010 12:17 PMhi,
We wanted to achieve the following.
1) Data which is older more than 2 months should be sent and stored in a different storage device[ example: SAN storage / oracle storage etc ].
2) When user requests for the contentId and if its older more than 2 months, the request has to search / retrieve the secondary storage system and get the documents.
As of now, we need not required archival things, we just need retrive documents from out side devices. it can be SAS or any other storage device/unit.
i just need to retrive the content based on metadata from other storage device.
lets say one example , we have large amount data which is stored in one device or hard disc
it can be SAS or any storge unit, using UCM, i need to retrive to the content from storage device/unit.
how to retrive document from out side device ? how i need to configure for other storge unit ? is it possible through provider for providing other system information in UCM server ? is there any other alternate way ???
how it be achived ? how to config to other storage device using ucm ?
this requirement is very very urgent and we need proper soluation, so could please let me know soluation with a in detail description.
thanks in advance -
How to retrieve music content from iCloud
Hello,
My main computer crashed (hard drive died), & so I have been backing everything up to iCloud. I would like to know how I can retrieve the contents of my music (on iTunes) to my new computer without losing everything. Also, while I have your attention.....does anybody know how to delete previously authorized computers?
Many thanks!Welcome to the Apple Community.
You can't back up from a Mac to iCloud, what makes you think you have. -
How to retrieve the values from a LinkedList
Hello,
I have just put this question in java programming forums by mistake...I think that it should be here ...
I have created a LinkedList to store the results of a query to a database.
These reasults are decimal numbers and then I want to sum all these numbers to be able to make the average.
But when I try to retrieve the values of the Linked List I always receive an incopatible types error..
Here is an extract of my code in a jsp page.
LinkedList Average = new LinkedList();
String Media = rst.getString(10);
Average.add(Media);
int Size = Average.size();
double Sum = 0.0;
for (int i=0; i<=Size; i++)
double Result = Average.get(i)
Sum = Sum + Result;
}If I try to retrieve the value of only one node from the list , I can just putting <%=Average.get(i)%>...but..how can I retrieve all the values (they are decimal numbers) to be able to add them?If you want to sum all the values, is there any reason you just don't retrieve the sum from the database rather than the list of values?
anyway
List average = new LinkedList();
while (rst.next()){
// retrieve the number:
String mediaString = rst.getString(10);
Double media = Double.valueOf(mediaString);
// or maybe like this if it is a number in the database
Double media = new Double(rst.getDouble(10));
average.add(media);
doubleSum = 0.0;
for (Iterator it = average.iterator(); it.hasNext(); ){
Double result= (Double) it.next();
doubleSum += result.doubleValue();
} -
How to retrieve the values from PL/SQL table types.
Hi Every one,
I have the following procedure:
DECLARE
TYPE t1 IS TABLE OF emp%ROWTYPE
INDEX BY BINARY_INTEGER;
t t1;
BEGIN
SELECT *
BULK COLLECT INTO t
FROM emp;
END;
This procedure works perfectly fine to store the rows of employee in a table type. I am not able to retrieve the values from Pl/SQL table and display it using dbms_output.put_line command.
Can anybody help me please!!!!!
Thanks
Ahmed.You mean, you can't add this
for i in t.first..t.last loop
dbms_output.put_line(t(i).empno||' '||t(i).ename||' '||t(i).job);
end loop;or you can't add this
set serveroutput onor maybe, you are working in third party application where dbms_output is not applicable at all?
You see, not able like very similar it is not working - both are too vague...
Best regards
Maxim -
Hi,
I have a requirement to read the External Content Type and storing the Data in a Session Variable. The Reading of the content from External Content Type with out creating a External List.
Please help I am trying to find the solution, but unable to do that.
Thanks,
PradeepHi,
Firstly an external content type designed to work with SharePoint list and there is no way to read apart from this.
If you are looking the solution out of the " Business Connectivity" then find that data source has been exposed through WCF and Web Service ?
So you can use REST API and CSOM to consume those data in SharePoint.
You can also leverage the ADO.NET option if the datasources based on MS technologies.
Murugesa Pandian| MCPD | MCTS |SharePoint 2010 -
How to display the content from a file stored in database
when i am trying to display the content from a file which stored in database on oracle report 10g
data are displaying as following. please help me to display the data in readable format
<HTML LANG="en-US" DIR="LTR">
<!-- Generated: 1/11/2006, postxslt.pl [1012] v1
Source: amsug304286.xml
File: amsug304286.htm
Context: nil
Tiers: ALWAYS
Pretrans: YES
Label: Release 12 -->
<HEAD>
<!-- $Header: amsug304286.htm 120.4 2006/11/01 20:57:29 appldev noship $ -->
<!--BOLOC ug1_OMPO1010302_TTL--><TITLE>Product Overview (ORACLE MARKETING)</TITLE><!--EOLOC ug1_OMPO1010302_TTL-->
<LINK REL="stylesheet" HREF="../fnd/iHelp.css">
</HEAD>
<BODY BGCOLOR="#F8F8F8">
<A NAME="T304286"></A><A NAME="ProdOve"></A>
<CENTER><H2><!--BOLOC ug1_OMPO1010302--><B>Product Overview</B><!--EOLOC ug1_OMPO1010302--></H2></CENTER>
<p><!--BOLOC ug1_OMPO1010304-->Oracle Marketing drives profit, not just responses, by intelligently marketing to the total customer/prospect base. By leveraging a single repository of customer information, you can better target and personalize your campaigns, and refine them in real time with powerful analytical tools.<!--EOLOC ug1_OMPO1010304--></p>
<p><!--BOLOC ug1_OMPO1006611-->With tools necessary to automate the planning, budgeting, execution, and tracking of your marketing initiatives, Oracle Marketing provides you with:<!--EOLOC ug1_OMPO1006611--></p>
<ul>
<li>
<p><!--BOLOC ug1_OMPO1006612--><B>Customer Insight</B> - With sophisticated customer management and list generation, Oracle Marketing enables you to quickly generate target lists and segments using an intuitive user interface. The easy to use Natural Query Language Builder (NLQB) lets you query for customers or prospects using a natural language while hiding data complexity; fatigue management ensures that you do not over-contact the same customers with marketing messages; and predictive analytics helps you predict customer behavior that you can leverage to produce significant increases in marketing return on investments (ROI).<!--EOLOC ug1_OMPO1006612--></p>
</li>
<li>
ls.<!--EOLOC ug1_OMPO1010304--></p>
<p><!--BOLOC ug1_OMPO1006611-->With tools necessary to automate the planning, budgeting, execution, and tracking of your marketing initiatives, Oracle Marketing provides you with:<!--EOLOC ug1_OMPO1006611--></p>
<ul>
<li>
<p><!--BOLOC ug1_OMPO1006612--><B>Customer Insight</B> - With sophisticated customer management and list generation, Oracle Marketing enables you to quickly generate target lists and segments using an intuitive user interface. The easy to use Natural Query Language Builder (NLQB) lets you query for customers or prospects using a natural language while hiding data complexity; fatigue management ensures that you do not over-contact the same customers with marketing messages; and predictive analytics helps you predict customer behavior that you can leverage to produce significant increases in marketing return on investments (ROI).<!--EOLOC ug1_OMPO1006612--></p>
</li>
<li>
<p><!--BOLOC ug1_OMPO1006613--><B>Sales Alignment</B> - Oracle Marketing's leads management helps you compile and distribute viable leads so that sales professionals can follow up valuable opportunities and not just contact interactions. Additionally, support for distributing proposals and marketing material drive speedy and consistent setups and collaboration of best practices.<!--EOLOC ug1_OMPO1006613--></p>
</li>
<li>
<p><!--BOLOC ug1_OMPO1006614--><B>Marketing Insight</B> - While Oracle Marketing Home page reports and Daily Business Intelligence (DBI) for Marketing and Sales provide aggregated management level information in almost real time, operational metrics help in tracking the effectiveness of individual marketing activities.<!--EOLOC ug1_OMPO1006614--></p>
</li></ul>
</BODY>
</HTML>
<!-- Q6z5Ntkiuhw&JhsLdhtX.cg&Zp4q0b3A9f.&RQwJ4twK3pA (signum appsdocopis 1162406236 2673 Wed Nov 1 10:37:16 2006) -->Hi,
you can try to use the:
<b>ConsumerTreeListPreview</b>
layout for KM navigation ivew (or customize to your own).
This layout shows a folder tree on the left, a document list on the right. When you click on a document from the list it shows the contents of the file on the bottom of the iview.
Hope this helps,
Romano -
How to retrieve the data from Website and Upload it in SAP table?
Dear ABAPers,
I want to retrieve the data from website and upload the same in SAP Database Table is that possible.Please help me.It is very Urgent.
Thanks & Regards,
Ashok.Dear Abhishek,
Thanks for your reply.But my requirement is not met.
If i execute the program it should retrieve the data from particular website.
Thanks & Regards,
Ashok. -
Hello,
I need to know if it's possible to retrieve the content type used in a document library, so I can know the columns active and used in this document library. I am using the Client Model in C#.
ThanksFirst, retrieve your document library as a List object. Then, use the
List.ContentTypes property to iterate through all the content types assigned to the list.
Blog:
blog.beckybertram.com |
RSS | @beckybertram |
SharePoint 2010: Six-in-One -
How to retrieving the content using Links
Hi
Please suggest me how to retrive content using link property.
I have added link property to my Content. and i have added in internal resource path to the Link property.
But my question is how access the page which is linked to my Content.
How can i use it with anchor tag when i want show display the linked page content.
what are tags to be used to retrive the linked content in the page.
I found below line in CM documentation
"These relationships are used by developers in their content queries when retrieving content to display in
your portal."
But i could found how to retrive.
Genarally what technique we use to link an internal resource of our Content management
thanks in advance
Edited by: vamshi krishna on Jun 12, 2011 12:32 AMIt sounds like there may be a misunderstanding about our link property feature.
That feature is not for web hyperlinks. For that you can just use a string property. The links feature is for pointers to other pieces of content.
(from: http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/cm/contentTypesCm.html)
"Using Link Properties
You can create properties that allow content contributors to associate content items. Content contributors can link to content within the same or different repositories within the Virtual Content Repository. For example, if you have related content items that are stored in different folders, you can use content link properties to create relationships among content items. These relationships are used by developers in their content queries when retrieving content to display in your portal.
Link properties can also be multi-valued to allow content contributors to link to multiple content items. For detailed instructions on adding a link property, see Define the Properties of a Content Type."
Edited by: Chris Bales on Jun 13, 2011 2:56 PM -
How to retrieve the data from SAP database.
Hi Pals,
How to retrieve data from SAP R/3 System to my third party software. I will make my query little bit more clear. There is a list of assets entered and stored in the SAP system. For example 3 mobile phones.
1) Mobile 1- Nokia
2) Mobile 2 - Samsung
3) Mobile 3 u2013 Sony
Now think I do not know what all assets is there. I have to retrieve the data and get it on my third party software. Just display the list of assets. Lets say SAP XI is also there. Now how will I map it and get the details.
Please give me step by step method.
N.B: Just to read the data from SAP database.
Please make the flow clear step by step.
Thanking you
AKHi,
You can use RFC or ABAP Proxy to make synchronous call with SAP.
Under RFC or ABAP Proxy Program you can get the data from SAP tables. Direct access to SAP Database is not preferrable even if its possible.
The better way to go for RFC or PROXY.
You will send the request from Third party system and the it will be as input parameters from RFC/ Proxy it will response based on it.
This got it all..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
HTTP to RFC - A Starter Kit
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
Refer
Thanks
Swarup
Edited by: Swarup Sawant on Jun 4, 2008 9:32 AM -
How to move the Content from UCM11g to URM11g?
Hi,
One of our customer is using UCM 11g as their content repository for all document management requirements. They are looking for the possibility to implement URM for the record mangement requirements.
They are looking for the following specific scenario.
In UCM for any document if the metadata is updated with a specific value (example Status="Approved") then that particular version of the document should be moved automatically to URM.
How can we achieve this?. Can we use the UCM connector for URM?
In this scenario, whether the actual content will be transferred to URM or just the metadata will be created in URM for that particular document and the actual content still reside in UCM?.
Version:
Content Server=11gR1-11.1.1.5.0
WebLogic Server=10.3.5.0
ThanksHi
Usually the entire set of content management scenario like wf's , metadata , expiration etc are created on UCM Server . On the URM side all the life cycles like Retention , Disposition , Records actions etc are created .
So when you checkin a content and if it is attached to a category / record folders then it will be searchable from URM side as well .
As for moving the contents you can schedule the Synchronization on a manual basis from UCM side where in the contents will then be searchable from URM side .
All the contents , metadata and such details will be on UCM itself but they will be attached to the URM life cycles .
Apart from this if you want then the same ucm server can be turned into a standalone RM server as well by selecting Standalone Option while enabling RM components .
Or else use the Adapter configuration to have UCM server with RM communicate with a full blown URM server .
Thanks
Srinath
Maybe you are looking for
-
Seeburger AS2 receiver adapter conf PI 7.1
Dear All, I have seen a changed AS2 adapter on PI 7.1,the options are totally different than what we have in previous version of AS2 adapter. I am looking for seeburger AS2 adapter documents and configuration steps for PI7.1 version. Any inputs... ch
-
The pictures that I take with my 5s can't be used as background
When I take a pic on my new 5s and try to use it as a background, the pics are too large and much of the picture is off the screen. I have tried to resize it but i needed MS windows to do that. If I need to resize it, can I do that right on the phon
-
Unable to register one extract,but the other twos are ok.
Enviroment: OS:Windows Server 2003 64bit GG: Oracle GoldenGate Command Interpreter for Oracle Version 11.2.1.0.6 16211226 OGGCORE_11.2.1.0.6_PLATFORMS_130418.1829 Windows x64 (optimized), Oracle 11g on Apr 19 2013 17:38:40 There are three extract on
-
Should I get a POST screen with barebones?
Got a new barebones Wind PC Nettop, popped in RAM, attached known working (but old) VGA monitor (Compaq 460P, built 1994) & keyboard, powered on. Blue light on in front. No VGA image. Popped out RAM, did same, and still no VGA image (nor signal, as
-
My iMac crashed hard, need advice
I have a 2.8 ghz iMac with 4GBand 500GB HD running 10.6.2. It would not reboot. About 6 hours earlier, I had applied an update to the EyeTV software, and the update crashed (but the iMac kept running). However, the EyeTV successfully recorded a TV sh