How do we update the entry in Table HRESSAPPROVER Table?

Hello friends,
I need to understand how the table HRESSAPPROVER Table entries are modified? Do we need to follow a Tcode like PA40 to initiate an Action or do we need to update any infotype, or should we directly edit the entries in table using some Tcode?
Thanks
Avik

Hi,
check this thread
How to maintain HRESSAPPROVER table
Regards,
Manoj.

Similar Messages

How can I eliminate the entries in ROOSPRMSC/ ROOSPRMSF tables?

After the SAP R/3 QA homogeneous system copy refresh (overwrite) from Production SAP R/3:
1.RSSDLINIT / RSSDLINITSEL tables in BW and ROOSPRMSC / ROOSPRMSF tables in the source system display different entries. More precisely:
ROOSPRMSC/ ROOSPRMSF tables and RSSDLINIT / RSSDLINITSEL tables have different entries in INITRNR and RNR fields
The field SLOGSYS in ROOSPRMSC/ ROOSPRMSF tables contain an id client different at SAP R/3 QA source system in which applications run
2.BW delta Queue is empty in SAP R/3 QA source system.

Hi,
Perform the following steps:
Step 1 : Delete all the entries from BW delta queue.
Step 2 : Check all the info-package init selections and delete them if it has not been deleted yet.
Please let us know if the problem still persists.
Thanks
Soumya
Assign points if useful***

How do I update the result table ?

I am having problem to design and update the competition results in WPC_RESULTS table.
I have 3 tables
1. WPC_COMPETITION - It has details of the competition to be conducted.
2. WPC_MEMBERS - Member details.
3. WPC_RESULTS - Competition results which will have Member_ID, Competition_ID and Status.
In Region 1. I have a drop down list from which I can select the Competition.
Problem is with region 2.
==================
In Region 2. I plan to have All the Member's Name from WPC_MEMBERS, a Status column (W=Win or L=Lost or X=NotPlayed) from WPC_RESULT which can be updated. But the table WPC_RESULTS dosenot have a primary key but has 2 foreign key one from WPC_COMPETITION and one from WPC_MEMBERS.
I am just not able to plan & create this region 2.
Can someone login to my wokspace and give me a helping hand.
Please mail me at [email protected] and I would give you the password for my workspace.
Regards,
Nikhil Karnik

My problem is since the WPC_RESULT table has two master tables. I cannot use a Master Detail form.
What I am trying is,
On a form which displays all the member in WPC_MEMBERS, Drop down list of competition name from WPC_COMPETITION table and a there should be checkbox for status column of WPC_RESULT. So my challenge is to update the WPC_RESULT table with the respective member id and competition id and status in WPC_RESULT table.
As you said I can use a PL/SQL, but I could not understand how do create my PLSQL block to identify each member on the form and update the competition status associated with that member.
in short the table definition is like
CREATE TABLE "WPC_COMPETITION"
(     "COMPETITION_NAME" VARCHAR2(100),
     "COMPETITION_CODE" NUMBER,
     "DATE_CONDUCTED" DATE,
     CONSTRAINT "WPC_PK1" PRIMARY KEY ("COMPETITION_CODE") ENABLE
CREATE TABLE "WPC_COMPETITION"
(     "COMPETITION_NAME" VARCHAR2(100),
     "COMPETITION_CODE" NUMBER,
     "DATE_CONDUCTED" DATE,
     CONSTRAINT "WPC_PK1" PRIMARY KEY ("COMPETITION_CODE") ENABLE
CREATE TABLE "WPC_RESULTS"
(     "COMPETITION_CODE" NUMBER,
     "STATUS" VARCHAR2(1),
     "MEMBER_ID" NUMBER
ALTER TABLE "WPC_RESULTS" ADD CONSTRAINT "WPKD_FK1" FOREIGN KEY ("COMPETITION_CODE")
     REFERENCES "WPC_COMPETITION" ("COMPETITION_CODE") ENABLE
ALTER TABLE "WPC_RESULTS" ADD CONSTRAINT "WPKD_FK2" FOREIGN KEY ("MEMBER_ID")
     REFERENCES "WPC_MEMBERS" ("MEMBER_ID") ENABLE
/

How to update the COST column using another table's column

Dear All,
I have table:
table parts: pno, pname, qoh, price, olevel
table orders: ono, cno, eno, received, shipped
table odetails: ono, pno, qty
view:orders_view: ono, cno, eno, received, shipped,sum(qty*price)order_costview:odetails_view: ono, pno, qty, (qty*price)cost
after I update the price in parts, I need to update COST and ORDER_COST too. The orders_view does not have pno, qty, and price, the odetails_view does not have price, how can I update the COST and ORDER_COST. Please help and Thanks in advance!!!
I wrote the update the price in parts:
create or replace procedure change_price(ppno in parts.pno%type, pprice in parts.price%type) as
begin
    update parts
    set price = pprice
    where pno = ppno;
end;
show errorsthis procedure works fine.
I wrote the trigger:
create or replace trigger update_orders_v
after update of price on parts
for each row
begin
    update orders_view
    set order_cost = sum(parts.(:new.price)*parts.qty)
    where parts.pno = :new.pno;
end;
show errorsIt gives me:Errors for TRIGGER UPDATE_ORDERS_V:
LINE/COL ERROR
3/5 PL/SQL SQL Statement ignored
4/22 PL/SQL ORA-00934: group function is not allowed hereplease help!

You could add the columns to the tables and then you would need a trigger to update those columns. However, you could just as easily select the price * qty to get the cost, without creating an additional column or trigger. I have no idea what you might want to do with a global temporary table. I think you need to explain what your purpose is, before any of us can suggest the best method. Since I have already demonstrated an update with a view, I will demonstrate an update with the cost column added to the odetails table and a trigger as you asked about. Notice that you will need triggers on both tables, the one that has qty and the one that has price.
scott@ORA92> create table parts
2    (pno    number(5) not null primary key,
3      pname varchar2(30),
4      qoh    integer check(qoh >= 0),
5      price number(6,2) check(price >= 0.0),
6      olevel integer)
7 /
Table created.
scott@ORA92> create table odetails
2    (ono    number(5),
3      pno    number(5) references parts,
4      qty    integer check(qty > 0),
5      cost   number,
6      primary key (ono,pno))
7 /
Table created.
scott@ORA92> create or replace procedure change_price
2    (ppno   in parts.pno%type,
3      pprice in parts.price%type)
4 as
5 begin
6    update parts
7    set    price = pprice
8    where pno = ppno;
9 end;
10 /
Procedure created.
scott@ORA92> create or replace trigger update_cost1
2    after insert or update of price on parts
3    for each row
4 begin
5    update odetails
6    set    cost = qty * :new.price
7    where pno = :new.pno;
8 end update_cost1;
9 /
Trigger created.
scott@ORA92> show errors
No errors.
scott@ORA92> create or replace trigger update_cost2
2    before insert or update of qty on odetails
3    for each row
4 declare
5    v_price parts.price%type;
6 begin
7    select price
8    into   v_price
9    from   parts
10    where pno = :new.pno;
11    --
12    :new.cost := :new.qty * v_price;
13 end update_cost2;
14 /
Trigger created.
scott@ORA92> show errors
No errors.
scott@ORA92> insert into parts values (1, 'name1', 1, 10, 1)
2 /
1 row created.
scott@ORA92> insert into odetails values (1, 1, 22, null)
2 /
1 row created.
scott@ORA92> -- starting data:
scott@ORA92> select * from parts
2 /
       PNO PNAME                                 QOH      PRICE     OLEVEL
         1 name1                                   1         10          1
scott@ORA92> select * from odetails
2 /
       ONO        PNO        QTY       COST
         1          1         22        220
scott@ORA92> -- update:
scott@ORA92> execute change_price (1, 11)
PL/SQL procedure successfully completed.
scott@ORA92> -- results:
scott@ORA92> select * from parts
2 /
       PNO PNAME                                 QOH      PRICE     OLEVEL
         1 name1                                   1         11          1
scott@ORA92> select * from odetails
2 /
       ONO        PNO        QTY       COST
         1          1         22        242
scott@ORA92> -- select works without extra cost column or trigger:
scott@ORA92> select o.ono, o.pno, o.qty, (o.qty * p.price) as cost
2 from   odetails o, parts p
3 where o.pno = p.pno
4 /
       ONO        PNO        QTY       COST
         1          1         22        242
scott@ORA92>

How can i update the REMARK field in ADRT database table

Hi all,
How can i update the REMARK field in ADRT database table
By using Function modules or BAPIs
Please reply me fast

Hi,
you can try this code:
    SELECT SINGLE * FROM KNA1 WHERE KUNNR = wa_kunnr.
    IF sy-subrc = 0.
      CLEAR adrct.
      SELECT SINGLE * FROM adrct WHERE addrnumber = kna1-adrnr.
      IF sy-subrc = 0.
        adrct-remark = wa_remark.
        MODIFY adrct.
      ENDIF.
    ENDIF
best regards,
Thangesh

How can I update the trigger table?

I need a insert trigger on a table and also wants to insert the result value in one of its field.
it gives mutating error........
so wots the way of updating it? how can i update the same table.

For example like this (inside the BEGIN/END section of the trigger):
:NEW.Col2 := :NEW.Col1;
C.

How can i update the ADRT table REMARK field

How can i update the ADRT table REMARK field
by using only function modules or BAPI's not by direct update's
please help me
i need it urgently

Hi,
you can try this code:
    SELECT SINGLE * FROM KNA1 WHERE KUNNR = wa_kunnr.
    IF sy-subrc = 0.
      CLEAR adrct.
      SELECT SINGLE * FROM adrct WHERE addrnumber = kna1-adrnr.
      IF sy-subrc = 0.
        adrct-remark = wa_remark.
        MODIFY adrct.
      ENDIF.
    ENDIF
best regards,
Thangesh

If record is in application server how do u update the single table

hi
could anybody tel me
if record is in application server how do u update the single table
by using direct input method

If your Flash player/plugin is older, the only way is to go to Adobe's site (use Limnos' link) and download the full installer. A .DMG file, which you doubleclick to have it mount on the desktop. Inside is the Flash installer app you doubleclick to run and have it upgrade all. Will need an Admin user account.
After you've upgraded to the latest & greatest, currently 11.5.502.110, a Flash perfpane will show up in System Preferences, where you can set it to auto-update itself, warn you of new updates or manually check for same.

How can i update data in okc_k_items and csi_item_instances tables?

How can i update data in okc_k_items and csi_item_instances tables?
by EBS .
Thanks.

For csi_item_instances table, you can use the following API:
CSI_ITEM_INSTANCE_PUB.UPDATE_ITEM_INSTANCE
For okc_k_items, try using the following API:
OKC_CONTRACT_ITEM_PUB.UPDATE_CONTRACT_ITEM
Hope this helps!

Update the correct profit center in tables BSEG / BSAS / BSIS / BSIK / BSAK

Hi FI Gurus,
I am looking after a Support Project in SAP IS-Retail. I am from the FI functional and possess very limited knowledge in FI.
My client has done the sales posting in SAP using IDOC's. During the postings, it was found that wrong Profit Centers were assigned. Due to this, the sales reports based on Profit Center are coming wrong. It was suggested to the client to reverse the IDOCs, do necessary changes in Profit Centers and re-post the IDOCs. The client wanted a short method to get the reports right. A senior consultant (Non FI) in the Company and the Management are forcing me to write a ABAP program to update certain (not all) FI tables. According to me, it will have some negative impact on the system for which reason I am not ready to take the call as a Project Manager. The management wants me to do the following (I am quoting the same mail which I received from the consultant ) :
We need to update the correct profit center in tables BSEG / BSAS / BSIS / BSIK / BSAK / BSID / BSAD, wherever the records exists against billing document numbers provided.
BAPI for updating profit center in Accounting documents: BAPI_ACC_DOCUMENT_POST
Function Module : 'BAPI_DOCUMENT_CHANGE'
Also look at SAP Note: Note 966428 - FB02: Functional area (FKBER) can be changed on coding block
Based on the above, the ABAPer has written the program, the program will update the tables BSEG, BSIS, BSIK, according to the selection criteria of document number, company code and line item number with the new profit centers.
Please clarify me about the following :
1. This program is updating profit center in just the FI tables (BSEG, BSIS, BSIK etc.), but the New GL tables (faglflexa and faglflext) which have approx. 65 lakh entries in PRD do not get updated with the correct profit center.
2. The Controlling tables also do not get updated with this program yet. Also since the previoius updation of Profit centers did not happen correctly, most of the times the controlling document has not been generated at all. Since we will be updating the profit center in just the FI tables, the controlling document will not be created still. Though there are SAP notes suggesting re-creation of the Controlling documents, which is still an option you can choose. Please confirm.
3. The Special GL also does not get updated because of this.
This is a very critical and hot issue. My job is at Stake as the Management has threatened me of sacking if I do not follow their directives as they are only concerned with their money.
Is the consultant who suggested this change RIGHT ?
Your early replies will help me take the decision.
Regards

Hi,
There is no standard program or BAPI that would update profit centre in a posted document. You should either develop your own process for it,which is not recommended, but sometimes is essential, or reverse the existing documents and post them with the correct profit centre.
Regards,
Eli

How can i write the trigger for Global Temporary Table

Hi Grus,
How can i write the trigger for Global Temporary Table.
I was created the GTT with trigger using the below script .
CREATE GLOBAL TEMPORARY TABLE GLOBAL_TEMP
EMP_C_NAME VARCHAR2(20 BYTE)
ON COMMIT PRESERVE ROWS;
CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
BEFORE DELETE OR UPDATE OR INSERT
ON GLOBAL_TEMP
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
INSERT INTO EMPNAME VALUES (:OLD.EMP_C_NAME);
END;
trigger was create successfully, but the wouldn't insert into to EMPNAME Table..
Please guide whether am correct or not? if not kindly give a correct syntax with example
Thanks in Advance,
Arun M M

BEGIN
INSERT INTO EMPNAME VALUES (:OLD.EMP_C_NAME);
END;
you are referencing old value in insert stmt.
BEGIN
INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME);
END;then run ur application it works fine...
CREATE GLOBAL TEMPORARY TABLE GLOBAL_TEMP
EMP_C_NAME VARCHAR2(20 BYTE)
ON COMMIT PRESERVE ROWS;
CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
BEFORE DELETE OR UPDATE OR INSERT
ON GLOBAL_TEMP
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
dbms_output.put_line(:OLD.EMP_C_NAME||'yahoo');
INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME);
dbms_output.put_line(:OLD.EMP_C_NAME);
END;
create table EMPNAME as select * from GLOBAL_TEMP where 1=2
insert into GLOBAL_TEMP values('fgfdgd');
commit;
select * from GLOBAL_TEMP;
select * from EMPNAME;
output:
1 rows inserted
commit succeeded.
EMP_C_NAME
fgfdgd
1 rows selected
EMP_C_NAME
fgfdgd
1 rows selectedgot it Arun
Edited by: OraclePLSQL on Dec 28, 2010 6:07 PM

How can I update the project varibles in OBPM 10.3

Hi All,
OBPM version : 10.3.2 (weblogic Enterprise version)
How can I update the project variables from the External process?
I per my knowledge we use termination wait activity and notify the same from the external process. I am successfully do this but I am facing the performance issue with this and sometimes even data sources pool is getting exhausted.
Could you please tell me is there any other way to update the project variables?
Thanks in advance.
Narasimha
Edited by: Narasimha on Mar 2, 2011 4:19 AM

I do not disagree with Mark about using Message Waits to update project variables. I'm right in the middle of logic right now that is doing just that.
If you have thousands (or in your case millions) of instances to update all at once, you might want to also want to consider another approach. I obviously do not know your process and sure you've thought of this, but you could use a database to store this same information that you are currently using project variables for. You'd need a table that has the instance's unique id (e.g. case id, loan number, claim number) as the primary key and then have columns to store the information you are currently storing in project variables.
Taking this approach, you'd be updating the milliions of rows in the database very quickly. You could still have project variables in your process, but they would be set at the beginning of a Screenflow or in an Automatic activity using a SELECT statement against the database table using the unique id of the instance as the key.
Dan

Import qeustion. How to to update the image description

We have imported 200k images using image manager, but there was not a way to specify the image description
I thought I may be able to do it in the import manager from a source file which had fields for image name and image description, but can not find a way to do this in image manager or in the import manager as the image table is not the main table.
How can we update the description field on images?
Thanks

Hi Lee,
We had same issue..We cannot see the image description in datamanager..we have created a qualiifed look up and reordered qualified table in such away, so that the qualified table is just below Image ..
Now you can import the image description via import manager and put the corresponding image in image table..
I know its digy but cant help ..waiting for 7.1 ..
Lets see what it offers...
Cheers!!
Vikrant M Kelkar..

How do I update the software on my Airport Express?

Hello everyone,
I have an Airport Extreme base station acting as WDS and an Airport Express station. I recently upgraded the security on the Airport Extreme base station from 128-WEP to WPA (Personal), but I don't know whether I have to do something to the Airport Express base station. It's green light is on. Do I need to do something? Also, how do I update the software in the Express? Whenever I open the Airport Admin Utility, the only thing that comes up on a scan is my Extreme base station. Any advice would be most appreciated.

yes you need to update your Airpost Express. I just went through this last week with two of my Airport Expresses. I updated my Base and my Remote's light was green but was unable to view it in Airport Admin Utility. So this is what I ended up doing and it works great.
First bring the Airport Express you are working on in the same room as your computer......just the ease of seeing what is going on with the Airport Express. Next you need to reset it.....take a paper clip and push in the little button next to the Audio port and hold in 10 seconds. Then unplug the unit wait 10 seconds and plug it back in. wait about 3 minutes and then you will need to use Airport Set Up Assistant. You will need to make sure you have WPA Personal on your Airport Express too.
don't forget to make sure you have the update firmware too.
http://www.apple.com/support/airport/
I hope this helps.....
Powerbook G4 1.67 15", 1 gig ram, 128 vram, 80 gig harddrive Mac OS X (10.4.6) Powermac G3 266 mt, Dell 5150,ibook G4, 1 gig shuffle, epson printers, airport

How do I update the software on my iPad to iOS 6.3.1?

How do I update the software on my iPad to iOS 6.3.1 from iOS 5.1.1?

See the chart below to determine whether you can upgrade your device and what you can upgrade to.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 6.1.x
iPhone 4S                                    iOS 6.1.x
iPhone 5                                      iOS 6.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 6.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1.x
iPad 3                                          iOS 6.1.x
iPad 4                                          iOS 6.1.x
iPad Mini                                     iOS 6.1.x
=====================================
Select the method most appropriate for your situation. If you are trying to upgrade to iOS 5 or higher, then you will have to connect your device to your computer and open iTunes in order to upgrade.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

How do we update the entry in Table HRESSAPPROVER Table?

Similar Messages

Maybe you are looking for