How do you change networks once one is picked?

Recently I had dinner at a local hotel, When I went to use the internet feature on my iPhone, the iPhone displayed the hotel's network. After I selected it, I then discovered I had to be a registered guest of the hotel to use their internet service beyond accessing their home page. However, I couldn't find anyway I could change or disconnect from the hotel service and re-access the ATT network. Any ideas how this can be done?

Go to Settings > Wi-Fi> select the blue dot next to the active Wi-Fi> select Forget this Network.

Similar Messages

  • How do you change network location type on Server 2012?

    Within Network & Sharing Center there appears to be no options available to change a network type as you could do in Server 2012?
    Within Network List Manager policies everything is set to "not configured" so this should not be disabling any functionality.
    Thanks.

    Hi,
    Firstly, if the server is domain joined, when it starts to detect the network location, the machine will contact a DC via port 389. If this detection successful, it will get the domain profile. And we cannot change it.
    However, if the server is not domain joined, the domain was not found or process failed, NLA will let you to determine which firewall profile will be used, private or public.
    We can do this by referring to
    Turn sharing on or off or
    How to change network location type in Windows 8.
    Also we can refer to
    Network Location Awareness (NLA) and how it relates to Windows Firewall Profiles.
    All the above articles can apply to Windows Server 2012.
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • How do you change password once it been setup

    Hi,
    I had installed my wireless network (Wireless B) last year and I think i did put a password.
    Now I want to change it..but I dont see any option/console on my desktop computer to make this change nor I remember my password.
    What are my options to change and secure my wireless network.
    Thanks
    Ramesh M.

    you can log into router through 192.168.1.1 and password is whatever you have as password, then go to administration and look at the password option and change it from there...
    l. ceron

  • How do you change network settings at the command line when they were set in the

    Ubuntu server setup in a remote location awhile ago, with GUI packages. Currently at
    version 14.04 LTS. There is ssh access to the remote server.
    After a lot of digging thru typical command line configs and not finding the existing
    settings anywhere, it appears the only way to update existing settings -- DNS
    name servers, IP's, etc. -- is using a GUI method, such as gsettings or unity-control-center.
    However,
    gsettings doesn't appear to have those particular items.
    Is
    the only option to use a remote version of Unity .... or just get someone
    on-site and remedy this thru the GUI?
    This topic first appeared in the Spiceworks Community

    Hi and thanks for your reply,
    I used one mini DV Tape for my footage and captured the whole thing into CS6 in one go and so the capture should have been the same throught all of the film. Once I had edited the tape on to the timeline some of the clips are 16.9 widescreen and others are 4.3 standard.
    Help!!!!!

  • How do you change songs from one computer to another?

    I am getting rid of the computer my library is on, and I would like to move that library to my new computer. I have tried everything I can think of. Is there any way of changing the library to the new computer? I don't want to lose all of my songs.

    Copying music between authorized computers with iTunes for Windows

  • In IOS 6 my date format was YYYY-MM-DD. When I switched to IOS 7, it changed to MM-DD-YYYY. How do you change it?

    In IOS 6 my date format was YYYY-MM-DD, which is ISO 8601 standard used in Canada.  When I switched to IOS 7, it changed to MM-DD-YYYY format which is very confusing as all my cameras etc use YYYY-MM-DD.  How do you change it, like one can in OSX?

    It appears previous versions of IOS would pick up your preferred date format from your OSX Mac. You can modify that to whatever you like.
    Now if you select Canadian or American in IOS 7 you get only MM-DD-YYYY.  This is wrong for Canada as the preferred date format here is YYYY-MM-DD, just check your birth or expiry dates on your Ontario Drivers License or OHIP Health Card.  Or the date field at the bottom left of any Government of Canada website.
    The trouble with using other Country codes is you tend to get their currency codes like € or £ and the terms like yesterday and today in their language.

  • HT204053 I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?

    I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?

    See https://discussions.apple.com/message/19218571#19218571.

  • TS1702 how  do you change the contact app to appear first name last name once it is in another setup mode

    how do you change the setup in the contact app to first name, last name once it is in differently

    Settings>Mail, Contacts, Calendars>Contacts>Sort Order - First, Last or Last, First .... or Display Order and make the changes that you want.

  • How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

    How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

    Hi mujabee1111,
    Please uninstall the application from your machine and then use the link below to download the installer for the CS5 download in English language:
    Download CS5 products
    Regards,
    Sheena

  • I just set up a wireless network using an airport express. How can you change the network name

    How can you change the name of a wireless network set up with an airport express

    Yes, you can. If you use the current AirPort Express, Apple says that you can connect up to 50 devices. Realistically, make that 25-30 or so before the speed really begins to drop.
    Remember that you will have to reset the modem though, before you connect it to the AirPort Express as the modem "remembers" the settings for your computer.

  • Same question for the "2 iPhones in one account".....How do I change the name.  My iPhone is showing my wife's iPhone name when I am syncing it.  Why is that?  I know about using one iTunes account....But how do you change the name w/o erasing your data?

    Hi....How do you change the name?  When I sync my iPhone, it shows my wife's name on it?

    Unfortunately it is not doing it....
    Let me give more details..We have 3 iPods and 2 iPhone4....I recently purchased the iPhone4 and when we connected it..It was already reading my wife's iPhone4..We went to the Apple Store at the Grove today and was told to de-authorize the system and connect my iPhone4 back and I should be able to change the name.
    Nothing happened..Right now, I clicked on RESTORE settings...and it is uploading a new iPhone update. 

  • HT4061 How do you change your phone number than is in your iPad and replace it with right one to receive and send messages?

    How do you change your phone number in your iPad messages and replace it with another number. In order to send and receive messages to the correct phone number?

    It's best to use an email address on the iPad.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • How do you change multiple songs genre at the same time

    How do you change multiple song's genre at the same time with out during them one a time in ITunes  on Windows 8?

    You can select a range of songs by selecting the first, then holding shift when clicking on the last. You can ctrl+click to add or remove from the selection. Once you have a selection press Ctrl+I to Get Info. Type in the new Genre and press OK.
    tt2

  • How do you change the default size of the print batch size for mail merge in Publisher 2010?

    I appended this question to another thread with the same topic but have not received a reply, so I'll try with a new question. Publisher 2010, when doing mail merge, will only merge and print two records at a time. How do you change the default size of
    the print batch size? This is for a 4 page document, 8 1/2 x 11, printed two sides on 11 x 17. I've tried all the suggestions that were in the other thread. The response that was marked as the answer by the moderator is incorrect and does not work. Nothing
    suggested in that thread works. A registry fix that worked for Publisher 2003 won't work because the print batch size key does not exist in the registry for Pub 2010. At least not that I can find. Printing to an XPS document doesn't work. It asks for a filename,
    prints 2 records, asks for new file name, prints 2 records, asks for new file name, and so on. The same for printing to a PDF document. Merging to a new Pub document doesn't work. When I print that job every other sheet is turned over. I.e., sheet one has
    pages 1 & 3 on top, next sheet has 3 & 4 on top, and so on. This makes it impossible to run them through the folder. The same thing happens when I print that complete merged document to XPS or PDF. I have the latest drivers installed for our printer, a Toshiba
    2500C copier/printer connected via network. What do I need to do to to change the batch size to something reasonable, like 100 records?

    It's been two weeks since I posted this question. What does it take to get an answer? I cannot believe it's being ignored, nor can I believe that someone in MS doesn't have an answer.

  • How do you change the timeline duration in Photoshop CC?

    There seems to be 5 second limit on the duration of the timeline in Photoshop version 2014.
    How can you extend the duration of the animation? There's a timeline window, but no "animation" window as mentioned in many of the help files.
    How do you change the duration in Photoshop  2014?
    I'm using Windows 8.1 as my OS.
    Thanks.

    Thanks for the reply, but my point was not about the lack of creating animations.
    It seems that in Photoshop CC, you cannot change the duration of the timeline unless you click on the end of a clip and drag it out which will then give you more time.  As the original post mentioned, you automatically get a 5 second duration unless you have a video clip that is of longer time.  This all makes sense for videos, I understand that nobody (usually) wants to stretch video.  Video by nature will extend the timeline based on how much footage is present.
    Now take an animation scenario where you want to create something from scratch that spans longer than the default 5 seconds.  There is no option!!! No document settings, nothing that will allow you to extend the timeline.  I now have to click and drag each layer clip on the timeline to give it more time for the animation, one by one might I add (you can't even highlight multiple clips and extend them all at once, which is crazy).
    So what does this mean?  Well if you create a mockup of something with all of these intricate layers including backgrounds, copy etc. and you only intended to animate a certain piece for say 8 seconds, you'll have to extend each and every single layer clip in the timeline otherwise they will magically disappear and the only thing displaying is that which you have extended manually.
    The reason why you need a document settings in the timeline is to prevent content from disappearing if something extends for a certain amount of time.
    Frame by frame animations only allow for so much functionality, try to animate multiple objects at once with frames and go back and make a change to one part...
    CS5 would simply show everything regardless if they did nothing on the timeline, it allowed you to see all of your elements present.
    Again, I stand by my statement saying that the new timeline is flawed.

Maybe you are looking for