How do you create a messages group

How do you set up a group of cell phone #'s to send a group message through messages?

In the message App, create a new message and add all the recipients you want, then type your message and send it, it should be sent to any in the recipients list...

Similar Messages

  • How do you create a message group

    What is easiest way to create a contact group directly on my Iphone 4 for mass text messaging?

    You can create a group on your computer and sync it to your iPhone, but you will not be able to use it for mass text messaging. You need an application for that. I have created a free one called Easy Group
    http://itunes.apple.com/fr/app/easy-group/id461469079?mt=8
    Rémi
    Note: I may receive some form of compensation, financial or otherwise,from my recommendation or link.

  • How do you create a messages account the new macbook air

    how do you create a messages account the new macbook air

    Not possible to create a new mailbox with the iPhone.
    If the account is an IMAP account, you can create additional server stored mailboxes with the email client used on your computer for accessing the account or via webmail access for the account using a browser. Any additional server stored mailboxes created with an IMAP account will be available automatically when checking the account with the iPhone's Mail client, and will be kept synchronized with the server automatically.
    This is not possible with a POP account. You may be able to create additional server stored mailboxes with a POP account via webmail access for the account using a browser, but such mailboxes will not be available with the iPhone's Mail client, or with any email client used to access the account.
    Message was edited by: Allan Sampson

  • In Address Book, how do you create a new group under "On my Mac", not under "iCloud"?

    In Address Book there are groups under "On my Mac" and groups under "iCloud".  When I do File -> "Create new group", the new group always goes under "iCloud".  How can I make a new group to go under "On my Mac".  I also tried dragging the new group from the iCloud area to the "On my Mac" area, but that doesn't do it.  Address Book is version 6.1.3.  Thanks for your help.

    Maybe look in the Preferences > Accounts & disable the iCloud account? That should force it to create a local group then re-enable the iCloud account. I would use the 'File > Export… Addressbook archive' to make a backup before you begin, but it should be fine.
    I'm not sure 10.6.8 supported iCloud natively, so perhaps that is why it is being wierd?

  • How do you create temporary contact groups in Contacts?

    I attend music events several times a month, where there are often 1-30k people attending. I've made a lot of friends who also attend these events and like to meet up with them during the event, usually at different times as they often don't know each other.
    For example, at one event I might want to meet up with 20 different people. Some I know or perhaps someone who's a friend of a friend might want to meet me. I'll get their phone number as well to text them during the event.
    When I was on Windows mobile, I'll create a category named after the event, and I would add whoever I knew who was going the event to that category. After the event, I could just delete the category as it was no longer relevant.
    With the iPhone, I don't know how to do anything even close to this. I've done some research, and it looks like you move contacts into a folder, sync, move them back, and then sync again. This sounds pretty tedious, and doesn't account for the fact a contact may belong to several categories at the same time.
    Is there a solution in the pipeline or perhaps a 3rd party app that can let me assign contacts to multiple groups?  

    You might want to look at something like GroupMe.

  • How do you create a message in Photoshop?

    I was told you could add notes to your work in Photoshop, but I'm not sure how to do it.

    You use the Notes tool, which is under the eyedropper tool.
    Click on the spot in the document where you want the note to appear, the Notes panel will open, and you type in the Notes panel.
    If you place four notes in your document, 4/4 will show at the bottom of the Notes panel, with arrows that allow you to cycle through the Notes.

  • How do you create a group contact

    How do you create a group contact? I set up icloud, but that only shows individual names. I do not want to update to ios 8.0.2 yet as it is very buggy. Any ways on how I could send this? (This is for the mail app, not SMS)

    Hi benpete420,
    Thanks for visiting Apple Support Communities.
    If you would like to create a contact group, you can do so on iCloud.com or using the Contacts app on Mac OS X.
    Once the group is created, it will be synced to your iPad as well.
    You can find the instructions for creating groups at these links:
    iCloud: Create a group and add contacts to it
    Contacts (Mavericks): Group contacts
    All the best,
    Jeremy

  • How do you place contacts into groups on IPad ?

    How do you place contacts into groups on IPad ?

    You can't create groups in the contacts app on the iPad. See my post in this discussion here for alternatives.
    https://discussions.apple.com/message/22045579#22045579

  • How do I create an email group on iPad 2?

    How do I create an email group from email or contacts to send emails to groups of like contacts

    It's a comma (or semicolon) rather than a decimal point, if you're doing it manually, but that method does work across iPhone, iPad and iPod touch.
    This is actually close to how our "MailShot" app works (unlike most other group email apps) except that MailShot manages the groups for you and makes it easier to delete and add contacts to your groups.
    If your groups are small you can try our free version on
    http://itunes.apple.com/us/app/mailshot-group-email-done/id410279354?ls=1&mt=8.
    There's an upgrade path to the full version if you like it in that app. or you can go straight to the Pro version:
    http://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?ls=1&mt =8
    Any problems, get in touch on our support email.
    Peter
    Soluble Apps
    Disclosure: I am the developer of MailShot and MailShot Pro and may benefit from their sales.

  • How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

    how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

    To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry.  If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

  • How do I create a Public Group on the Calendar Server?

    How do I create a Public Group on the Calendar Server?
    <P>
    Anyone can create Private Groups or Member Only Groups. You must be given
    administrative rights to create Public Groups on the Calendar Server. The
    Calendar Server Admin (SYSOP) can give anyone rights to create Public Groups by
    using the uniadmrights tool.
    <P>
    Go to /users/unison/bin/
    and run the uniadmrights
    tool. Some sample syntax:
    <P>
    To list all users with administrative rights:<P>
    % uniadmrights -ls -host yourhostname
    <P>
    To give John Smith, a user on node 10000, rights to administer Public Groups:<P>
    % uniadmrights -e "S=Smith/G=John" -add -pgrp -n 10000
    <P>
    In Calendar Server 4.0, you also have the option of using the Admin Server GUI
    to assign Administrative
    rights (instead of using the command-line method) by going to User Management,
    Administration Rights.
    <P>
    With the proper administrative rights, log into the Calendar Client. Go to Options,
    Manage Groups to create a new group. Choose PUBLIC from the dropdown window,
    add your users and/or resources and click OK to create the Public Group which
    can be seen by all users on the local Calendar Server.

    The following is info that I found in another post that I have been trying to follow.
    MrHoffman      New England
    Re: Configure DNS - OS X Server Next Steps
    Feb 13, 2011 6:36 AM (in response to Jimbooooooo)
    You're setting up internal DNS services, you referenced your ISP DNS servers and you should not have, and now those servers have no translations for your hosts. This is a common misconfiguration.
    See [configuring DNS on Mac OS X Server|http://labs.hoffmanlabs.com/node/1436] for how to set up your internal DNS server.
    And if there are any references to your ISP DNS servers here (within your client settings, within your server settings, your Airport settings, etc), then you're usually going to have DNS and connectivity problems. You're running a server now, so you'll be running your own services, and (particularly because of NAT here) referencing only your own DNS server(s).
    You may be setting up external DNS (if and when you need that), but that should happen after you set up your internal DNS. The above article has a link to setting up external DNS, when you get around to that, if/when you need in-bound connections into your LAN.

  • How can you create a playlist with music and music video and play those from same playlist through Apple TV?

    How can you create a playlist on Ipod touch with music and music video,  and play those from same playlist through Apple TV?  I can download, create a playlist with both music and music video, stream that through the Apple TV with no problem.  The sound and the information show up on the TV, but when it gets to a music video, it only shows the information and "artwork".
    I also have a video playlist - videos play fine through the Apple TV, but will not shuffle through all videos - continues to repeat the same one.  I have most definitely selected shuffle in both locations - from the playlist and on the ipod video screen while video is playing.

    I finally got it... had to sync the photos with the music in iMovie, arrange the voiceover in GarageBand then export to iTunes, and then I was able to put it all together in iMovie and burn in iDVD... had a few glitches along the way but finally finished : )
    Message was edited by: jpewald

  • Re: How do you create and use "common" type classes?

    Hi,
    You have 2 potential solutions in your case :
    1- Sub-class TextNullable class of Framework and add your methods in the
    sub-class.
    This is the way Domain class work. Only Nullable classes are sub-classable.
    This is usefull for Data Dictionary.
    The code will be located in any partition that uses or references the supplier
    plan.
    2- Put your add on code on a specific class and instanciate it in your user
    classes (client or server).
    You could also use interface for a better conception if needed. The code will
    also be in any partition that uses or references the supplier plan where your
    add on class is located.
    If you don't want that code to be on each partition, you could use libraries :
    configure as library the utility plan where is your add-on class.
    You can find an example of the second case (using a QuickSort class,
    GenericArray add-on) with the "QuickSort & List" sample on my personal site
    http://perso.club-internet.fr/dnguyen/
    Hope this helps,
    Daniel Nguyen
    Freelance Forte Consultant
    http://perso.club-internet.fr/dnguyen/
    Robinson, Richard a &eacute;crit:
    I'm relatively new to forte and I'd like to know how can you handle utility
    type classes that you want to use through out your application? Ideally
    what I want is a static class with static methods.
    Let's say that I have a StringUtil class that has a bunch of methods for
    manipulating strings.
    My problem is that we have code that runs on the client and code that runs
    on the server. Both areas could use the StringUtil class, but from what I
    understand, I have to create StringUtil in a plan and then create a server
    object of type StringUtil. The server object will eventually get assigned
    to a partition. That's not good since I really want the server object to
    physically reside at the server end and at the client end. (Actually, I
    don't want a server object, I just want to invoke a static method of a
    static class).
    Any clues on how to solve this problem would be appreciated.
    Also, what is the url at Sage-it that has a summary of all emails that have
    been posted to [email protected]? Perhaps this question has been
    answered previously.
    Thanks in advance
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Hi Richard,
    Your question about "utility classes" brings up a number of issues, all of
    which are important to long-term success with Forte.
    There is no such thing as a static method (method that is associated with a
    class but without an implicit object reference - this/self/me "pointer") in
    TOOL, nor is there such thing as a global method (method not associated
    with a class at all). This is in contrast to C++, which has both, and
    Java, which has static methods, but not global classes. Frequently, Forte
    developers will write code like this:
    result, num : double;
    // get initial value for num....
    tmpDoubleData : DoubleData = new;
    tmpDoubleData.DoubleValue = num;
    result = tmpDoubleData.Sqrt().DoubleValue;
    tmpDoubleData = NIL; // send a hint to the garbage collector
    in places where a C++ programmer would write:
    double result, num;
    // get initial value for num....
    result = Math::Sqrt(num);
    or a Java programmer would write:
    double result, num;
    // get initial value for num....
    result = Math.sqrt(num);
    The result of this is that you end up allocating an extra object now and
    then. In practice, this is not a big deal memory-wise. If you have a
    server that is getting a lot of hits, or if you are doing some intense
    processing, then you could pre-allocate and reuse the data object. Note
    that optimization has its own issues, so you should start by allocating
    only when you need the object.
    If you are looking for a StringUtil class, then you will want to use an
    instance of TextData or TextNullable. If you are looking to add methods,
    you could subclass from TextNullable, and add methods. Note that you will
    still have to instantiate an object and call methods on that object.
    The next issue you raise is where the object resides. As long as you do
    not have an anchored object, you will always have a copy of an object on a
    partition. If you do not pass the object in a call to another partition,
    the object never leaves. If you pass the object to another partition, then
    the other partition will have its own copy of the object. This means that
    the client and the server will have their own copies, which is the effect
    you are looking for.
    Some developers new to Forte will try to get around the lack of global
    methods in TOOL by creating a user-visible service object and then calling
    methods on it. If you have a general utility, like string handling, this
    is a bad idea, since a service object can reside only on a single
    partition.
    Summary:
    * You may find everything you want in TextData.
    * Unless you anchor the object, the instance will reside where you
    intuitively expect it.
    * To patch over the lack of static methods in TOOL, simply allocate an
    instance when required.
    Feel free to email me if you have more questions on this.
    At the bottom of each message that goes through the mailing list server,
    the address for the list archive is printed:
    http://pinehurst.sageit.com/listarchive/.
    Good Luck,
    CSB
    -----Original Message-----
    From: Robinson, Richard
    Sent: Tuesday, March 02, 1999 5:44 PM
    To: '[email protected]'
    Subject: How do you create and use "common" type classes?
    I'm relatively new to forte and I'd like to know how can you handle utility
    type classes that you want to use through out your application? Ideally
    what I want is a static class with static methods.
    Let's say that I have a StringUtil class that has a bunch of methods for
    manipulating strings.
    My problem is that we have code that runs on the client and code that runs
    on the server. Both areas could use the StringUtil class, but from what I
    understand, I have to create StringUtil in a plan and then create a server
    object of type StringUtil. The server object will eventually get assigned
    to a partition. That's not good since I really want the server object to
    physically reside at the server end and at the client end. (Actually, I
    don't want a server object, I just want to invoke a static method of a
    static class).
    Any clues on how to solve this problem would be appreciated.
    Also, what is the url at Sage-it that has a summary of all emails that have
    been posted to [email protected]? Perhaps this question has been
    answered previously.
    Thanks in advance

  • How do I create a message board/forum using forms in Dreamweaver?

    I want to create a forum or messageboard using the form in Dreamweaver but I don't know how to do it. Is there any guidance on how I could create a message board or forum on Dreamweaver?

    I don't think it can be done with just dreamweaver,
    You will have to download something like PHPBB,
    If you have a host with fantastico deluxe you can easily set up a forum
    with it.
    Daniel

  • How do I create Required UNIX Groups  in my Mac OS X version 10.3.9 ?

    Hi there,
    How do I create Required UNIX Groups in my Mac OS X version 10.3.9 ?
    During my Oracle 10g client installation, the doc. reads, "Start Workgroup Manager (/Applications/Server/Workgroup". But I don't see this server directory in my system.
    Thnaks in advance.
    siva

    Hi siva
    you can use the commandline nicl for this. It is described in the install docs that come with the database.
    regards,
    Ronald.
    http://homepage.mac.com/ik_zelf/oracle

Maybe you are looking for