How do you create groups in Lion 10.7.4 address book

Hi
I managed to write  a few group names in the left column, under All Contact. Now I want to add email addresses  to each group, I know it has to do with
dragging......
I did find something by  Getting Technical, and yes, it was technical, however I remember when I had support I called and all you had to do was dragging.
Thanks,
dona

Hi,
Open Address Book > go to the File Menu and come down to New Group.
Hope this helps.

Similar Messages

  • How do you create groups in Contacts?

    Is there a way to create groups in the Contact software on the iPad?

    No, and yes.  Groups are created on your computer, and synced to contacts.  You cannot create groups on the pad.  But don't get excited, because when you sync over the groups it is very difficult to get them to do anything.
    The good news is that there are a couple of apps that do this pretty well.  I used group email a lot and it works just fine.  There are a couple of others.  Read the reviews.

  • How do you create two apple ids for one email address.

    I bought two i pads for my kids. Since we have just one email address, everytime I try to create a new apple id it says I already have one. They need separate ids so their friends can facetime with one and not the other. Can't figure out how to create two apple ids with one email address.

    Donnathemom wrote:
    Well any ideas on how to solve this problem? When my daughter does facetime with someone it says she's Wyatt. She's not real happy about that. 
    Get her an email address, even if she never uses it.  They're free and available almost everywhere.  The only requirement is that the address be a valid one.
    Edit...
    You can even use an "alias" of yours.  That's a fake address that actually sends everything to you.  Check with your current email supplier.

  • How do you get the custom fields added to a address book to show up on Pages 09 when merging fields?

    I created some custom fields in the address book and want to get them merged into a Pages 09 document.  When using the merge fields feature in Pages, only the standard fields are displayed.  I am looking for a way to have the custom fields from the address book inserted into the document.

    I believe you will find them if you go to table - unhide all columns.  When you drag and drop card(s) into pages, it automatically shows default fields.  The others are there but hidden.  I hope this works for you!

  • How do you send an email to everyone in your address book

    hi guys.
    do you know how i send an email to everyone in my address book

    Open a new message, click on the Address Book button (the silhouette of a person), choose All Contacts on the left hand side of the Address Book, select the first name, Hold down cmd and at the same time press a. All persons will be highlighted. Now click on the "To" button and all the persons will appear in the To window of your message. 
    I would reitterate Low Luster's warning about spamming though...

  • How could you create 'Last Time Contacted' Smart Mailbox in Mail app Lion?

    Hello!
    For the purposes of maintaining regular contact with a large group of contacts in your address book:
    How could you create a smart mailbox in the Mail App (Lion) which contained that last unique sent/received email from each individual contact?
    So ideally just the last email per contact. For my purposes I would then sort by date and find the contacts I havent emailed in a while and re-initiate conversation.
    I also thought that perhaps it would be possible through Automator? (I am not very familiar with how to use this app)
    Any ideas/solutions would be very appreciated!
    nmarks
    (running lion 10.7.4 macbook pro late 2011)

    Okay, I think I just discoverd a workaround. This will work if you're lucky enough to already have a smart-mailbox folder that persists after close. (Somehow I had two such folders that already existed and weren't subject to the mysterious disappearances on closing the app; perhaps I created them in a previous OS X release?) Anyway, here goes:
    Locate an already existing smart mailbox folder that's working properly. Select the folder (in the sidebar).
    Duplicate that folder using the "Duplicate Smart Mailbox" Command. (It's on the contextual pop-up menu or available via the gear icon in the lower left of the window). This should produce and exact copy of the folder and the boxes inside, appearing at the bottom of the smart mailbox list.
    Edit the duplicate folder to put the smart mailboxes you want in it, and delete the previous mailboxes (duplicates) that you don't want.
    The new folder structure should now persist between launches of the app.
    There you go. Not the most elegant process, but workable. Don't know if there's a method if you don't have at least one smart mailbox folder already though.

  • How do you create a group contact

    How do you create a group contact? I set up icloud, but that only shows individual names. I do not want to update to ios 8.0.2 yet as it is very buggy. Any ways on how I could send this? (This is for the mail app, not SMS)

    Hi benpete420,
    Thanks for visiting Apple Support Communities.
    If you would like to create a contact group, you can do so on iCloud.com or using the Contacts app on Mac OS X.
    Once the group is created, it will be synced to your iPad as well.
    You can find the instructions for creating groups at these links:
    iCloud: Create a group and add contacts to it
    Contacts (Mavericks): Group contacts
    All the best,
    Jeremy

  • How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

    how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

    To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry.  If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

  • How do you create additional free space on the volume containing the iPhoto library?  I have plenty of HD space.

    How do you create additional free space on the volume containing the iPhoto library?  When attempting to import images from a CD I get an "Insufficient Disk Space" message albeit there is plaenty of additional space on the hard drive.

    How much free space do you have on your hard drive?  Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.

  • How do i create Group in contacts, How do i create Group in contacts

    How do i create Group in contacts

    If you sync your contacts to your computer you can create the group there. Then when you sync again the group wil appear on your iPhone. But the Mail app and the Messages app cannot use those groups.

  • How do I create groups in Mail and add contacts to that group?

    How do I create groups in Mail and then add contacts to that group?

    Look in Mail > Preferences > Composing tab > If you want all the email addresses to show, check "When sending to a group, show all member addresses".   If unchecked, just the groupname should appear.
    If it still doesn't work then review the email addresses for each of the group members looking for errors in format.
    Also, clean up the list in previous recipients in Mail > Window > Previous Recipients.

  • How do you create a link to a pdf in Muse? Thought it was going to show that with Katie's menu and can"t find in any of the tutorials.

    How do you create a link to a pdf in Muse? Thought it was going to show that with Katie's menu and can't find in any of the tutorials.

    The steps would be :
    - Add files from file menu > select pdf > add to site
    - Select the content (rectangle,text etc) and click on hyperlink dropdown > it should show you the added files list
    - Select the file you want to link
    Thanks,
    Sanjit

  • How do you create a new apple id on the iphone

    how do you create a new apple id on the iphone 4?

    Why do you want to do that?

  • How would you create a read/display only applicaiton montior role for SRM

    Hello,
    I was hoping to get some insight on how to create a display/read only SRM Application monitor role.  This role would be used by our Service Desk to perform basic trouble shooting before escalating.  Currently in our system it is tied into a tab named SAP Administration and has the capability of doing more than read.  How do you create a read version of this to only display the application monitoring in read mode? We currently have an SRP role that has the followiing auths below.  Would a EPP portal role need to be created and if so how>  Thank you for any assistance.
       Manually   BBP Component                                                BBP
              Manually   SRM: General Access Authorizations in EBP                    BBP_FUNCT
               Manually   SRM: General Access Authorizations in EBP                    T-SD59003000
                 Function in SRM (for Authoriza MON_ALERTS                                                                  BBP_FUNCT
    - Todd

    Hello,
    I was hoping to get some insight on how to create a display/read only SRM Application monitor role.  This role would be used by our Service Desk to perform basic trouble shooting before escalating.  Currently in our system it is tied into a tab named SAP Administration and has the capability of doing more than read.  How do you create a read version of this to only display the application monitoring in read mode? We currently have an SRP role that has the followiing auths below.  Would a EPP portal role need to be created and if so how>  Thank you for any assistance.
       Manually   BBP Component                                                BBP
              Manually   SRM: General Access Authorizations in EBP                    BBP_FUNCT
               Manually   SRM: General Access Authorizations in EBP                    T-SD59003000
                 Function in SRM (for Authoriza MON_ALERTS                                                                  BBP_FUNCT
    - Todd

  • HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad?  If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

    iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad?  If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.  I've seen reference to the  "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app.  I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for.  I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air.  Any help would be greatly appreciated.

    If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

Maybe you are looking for