How do you generate an executable in LabVIEW 8.6?

How do you generate an executable in LabVIEW 8.6? A point to a web site would be helpful.
Thanks in advance.

In version 8.0 and above you must create a LV project first. Once
you have created a project you can right click on build specifications
located at the bottom of the project window. Select
new>>application. This will allow you to create the exe. If you
want to create an installer then you must follow the same process.
They are now separate.
To find more information goto
the help menu in a LV window and select "search the LabVIEW help" When
the window pops up select the index tab and type the following:
"building, applications (how-to)" This should give you the information
you need.
Hope this helps.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor

Similar Messages

How to create a standalone executable in LabVIEW 2009 Professional Development System?

How to create a standalone executable in LabVIEW 2009 Professional Development System?
Solved!
Go to Solution.

This should help you out http://zone.ni.com/devzone/cda/tut/p/id/3303
Also remember that quick search with Google in many cases will be quicker than asking in this forum. I always use Google before I ask for help in any forum. It is much quicker
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

How will you generate the work schedule in live system

How will you generate the live system
Appreciate for sppedy answer

Your live system must be open for table changes if you want to generate your work schedule rules - this will need to be done by your basis team.
Usually, work schedule rules are generated in development and transported through to production. The generation is performed by using program RPTSHF00 (or transaction code OG00). You generate as a batch with the 'BTCI = ''/online, ='A' or 'E'"field set to E. This will save the generation to a transport. If you have a lot of work schedule rules, you may need to split the generation over more than one transport.
Regards

How do you uninstall older versions of labview

How do you uninstall older versions of labview and all their components, registries etc?
Solved!
Go to Solution.

If you're looking to get a more through uninstall, then Revo Uninstaller is a good way to go. That will run the regular NI uninstallers and then search for leftover registry entries and files. You can also use MSI Blast.

How do you generate a dynamic prompt in BO

Hi,
can anyone answer this question?
How do you generate a dynamic prompt?

Hi,
Dynamic prompt means user can enter value at run time (Report Refresh Time).
You can create dynamic prompt by drag one object in the webi query filter part and select as a prompt.
or on the universe level define the pre-defined condition and use that in the webi report.
Thanks,
Amit

How can you run an executable from AS2 code without using fscommand() or a projector?

Just using some short .asc files made out of Notepad for some back-end server stuff, but without using fscommand() or projectors, how can you call an executable? There's a C++ program that I want to run from more-or-less the same directory as the .asc files, which handles some logging, and I need to be able to pass it arguments when telling it to run.
Please note that I have Googled this with no useful results and that I'm on an assignment that necessitates this question. Also I'm open to the possibility that it can't be done.
Thanks!

The swf is on a different server and using AS3. The little bit of AS2 back-end stuff is on a few different servers that the swf is hooking up to for streaming video and audio. The executable would be on the AS2 servers.

Can you generate PDF file from LabVIEW?

Can you generate a PDF file from LabVIEW?

Hi there,
I just read this post in passing.
Heres a fairly detailed forum post on the matter - seems to be a few work arounds, but basically no you can't with just the normal labview.
http://forums.ni.com/ni/board/message?board.id=170&message.id=259103&query.id=65866#M259103
Thanks
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

How do you generate random data info using json and spry?

I have a mobile applicaton that uses spry datasets that dynamically populate a jquery mobile listview by using a json file. Everything is operating as it should.
However, I would like to understand how to pull random objects from the json file to have them displayed on a different page.
My json file is standard and not complicated. It has several levels. Each is represented as below:
                              { "Level1":
                                                            {"imageurl":"images/_myimage.png",
                                                            "someData":"S,A,P,R",
                                                            "levelLongDesc":"further description",
                                                            "name": "John Doe",
                                                            "page": "referencepage",
                                                            "description":"The description of the image"
{"imageurl":"images/_myimage.png",
"someData":"S,A,P,R",
"levelLongDesc":"further description",
"name": "John Doe",
"page": "referencepage",
"description":"The description of the image"
Json file Level1 has about 70 objects
What I would like to do is randomly load one of the Level1 object arrays into the page when the user selects a Level 1 radio button that is on the screen. I know how to create the page, radio buttons and basics, but just don't know how to pull in the random data.
I've found one code sample on this site that speaks to spry and xml, but I haven't been able to apply it in any way that works for me with the json file:
http://forums.adobe.com/message/662551
I've also googled. There isn't much on spry datasets with json and generating random info. There was a little bit on sorting, but that didn't help either.
Does anyone have a good example/tutorial of how to use the random function with spry/json?
TIA
-Rachel

I've done similar things before. A few thoughts for you:
1. I'm assuming you're doing a buffered period or frequency measurement on the incoming encoder pulses, right? First key point is that you'll have data that is spaced equally in position, but not equally in time. If you are looking for a time-based FFT such that increasing speed will shift your spectrum, you're going to need to go through an interpolation process to resample your data as though equally-spaced in in time.
2. Your 149 pulse per rev encoder may be a significant source of error unless its 149 pulses are placed with extreme accuracy. Any error in pulse placement violates your underlying assumption of data that is equally-spaced in position. It'll be very helpful to send your data through a software lowpass filter to attenuate those artifacts.
3. I am not sure what you mean by "decompose the buffered data (array) into a single datastream." You'll get an array of periods / frequencies from the call to DAQmx Read. If you want to use it in a LabVIEW waveform datatype, you'll first need to do the resampling to create equally-spaced-in-time data. The LabVIEW waveform datatype (and all the analysis functions like FFT that use it) depend on receiving data with a fixed constant time interval between samples.
-Kevin P.

How can you generate Multiple random numbers from 1 to 49?

I am very new at programming with the iPhone SDK and I need some help with a project I am working on. What I want to do is set up a window with 6 labels and 1 button. When the user clicks the button, the program will populate 6 randomized numbers each ranging from 1 to 49, and then place each of 6 numbers in a label. But each time the program ends and starts again the numbers cannot be the same, and also when the user clicks the button, no label can have the same number twice, so for example. If label 1 had the number 10, the other 5 labels cannot have that number until the button is clicked again. I know how to set up the interface, I just need the code. I would so greatly appreciate someone's help in this matter. I have been trying to do this for days and I cannot figure it out. Possibly someone who knows tons about Objective C programming can help me!
Thank-you so very much!!

I see that you're writing a lottery number generator. Perhaps the easiest way to do it is to emulate a real lottery: fill an array (NSMutableArray, probably) with the numbers between 1 and 49, pick one at random, remove that number from the array, and repeat. (You can think of the numbers as being the balls and the array as being the machine that pops them out.)
One simple way to get the random indices needed is to extract six random bytes from Randomization Services using SecRandomCopyBytes, then loop over them, using the modulo operator (%) to select an index within the size of the array.
And no, I'm not going to write your code for you. If I was going to do that, I could package and sell the app myself.

How do you generate a runtime class for iconFunction from a BitmapData?

Hi,
I have a AdvancedDataGrid that I would like to generate a colored square bitmap as the icon, and give it to iconFunction.
But iconFunction required the return of Class, but I have the BitmapData generated, can anyone provide a solution? Thanks.
Here is my code :
private function iconCallBack(item:Object):Class
    var layerNode:LayerItemVO = item as LayerItemVO;
    var iconBitmap:BitmapData = new BitmapData (14, 14, false, layerNode.color); //generated the bitmap based on the passed in color
     return iconBitmap; // wrong, because it needs to return Class, please help?
<mx:AdvancedDataGrid id="layer_datagrid" iconFunction="iconCallBack" >

Thanks for the reply.
Can you provide me some sample code as how to use the custom renderer for drawing the colored square in front of the item name?
Thanks.

How do you create superscripts subscripts in LabVIEW?

I want to create superscripts subscripts in LabVIEW, but those are not options in the Applications Font Dialog Box. How do I do this?

Hi,
If you need users to create those formulas, it can get very complex. You
cannot have font differences (or different fonts) in one string control.
Even if you make a font with sub and superscript included, this is no
solution.
If you need a static formula on the front panel, make it by using several
text boxes. For Asubscript(2)=Asubscript(1)Xsuperscript(2), one text is A =
A X B. The other text is smaller, and has 2 1 in it. The last has a 2
in it. When placed in the right position, it will make a fine formula.
If the formula must be user editable, or changeble from the program, ActiveX
is a solution. Microsoft Rich Text Box comes to mind. However, you must make
the interface to make the selected text sub or superscript yourself. (Or
control i
t from the program.) A webbrowser control in combination with
MathML also seems logical. Both solutions are not for the faint or heart...
Regards,
Wiebe.
"Jim Kane" wrote in message
news:[email protected]..
> I want to create superscripts subscripts in LabVIEW, but those are not
> options in the Applications Font Dialog Box. How do I do this?

How do you generate multiple random numbers between 1 and 49

I am new at mac programming and I want to make an iPhone app with the free SDK. What I would like to try is a random number generator. I imagine it as when the user clicks a button 6 random numbers from 1 to 49 would appear in a label or another control. If someone could please give me the code that would place these randomized numbers in a label I would greatly appreciate it. I know how to link all the controls together, I just need the code. Thank-you to anyone that can help!

semi-sudo code goes here
--prepare and array which will have number from 0 to 49
--loop thru the array like this
int i=0
for (i; i<=49; i++) {
int a=arc4random() % 49] ;
int b=arc4random() % 49];
--here exchange the objects so that they are shuffled
[myArray exchangeObjectAtIndex:a withObjectAtIndex:b];

How do you create a program in Labview that can be run as a Windows Service?

I would like to create a Labview program that can be run as a Windows service. I have read the following Knowlegebase articles and have done what they say.
Creating a Windows NT Service Using LabVIEW http://www.ni.com/white-paper/3185/en
Running a LabVIEW Application as a Windows NT/2000/XP/Server 2008/7 User-Defined Service http://digital.ni.com/public.nsf/allkb/21BA0F671A63A60386256CB4004DF99B
When trying to start the service I get an error that says the program didn't respond to the start in a timely manner. I also set the "run when opened" parameter in the VI. I am programming in Labivew 2010, proffesional version. The server is running Windows Server 2008. Can anyone help? Is the ini file important in Windows Server 2008?

I haven't looked through all those links. But I have created Windows Services from LabVIEW executables way back when WinXP came on the market.
The problem with services is that they have no UI. So you can't really see what is going on. Your EXE might be failing or hanging due to some kind of error (most liklely a security/permissions error), but you can't see the error. So my advice is to either:
1. Have your EXE write lots of info to a log file. Write info that log every step in the application. If an error ocurrs, have it write the error info to the log file. That is a very useful debugging tool.
2. Use VI Server functions to monitor the service to see what is going on.

How can you read datalog files in LabVIEW?

I have a VI that records time and waveform data and writes them as a cluster to a datalog file. I have been unable to read these files in any way, however. I have been working with the datalog examples in LabVIEW, but I have not been able to figure out how to use the Read Datalog File example effectively. Does anyone have any suggestions on how I can either use this example to read waveforms, or how I can design a VI to read datalog files in another way? Thanks.

Hi,
when you read from a datalog file you have to wire to the datalog type input of the Open File function a cluster of the same type as the clusters when you created the file; each cluster is a record.
In the example Write Datalog File Example.vi you see that each record consists of a cluster containing a string and 1D array of DBL; in the Read Datalog File Example.vi a cluster of exactly the same type is wired to the datalog type inputs.
You can use this example to read your datalog files but you must wire to the datalog type input a cluster containing the time data and a waveform data; pratically you have to tell how the data are saved in your file.
I hope I have been clear enough, eventually if you tell me how you save the time data (string, numeric) I
can modify the example to read your datalog files.
Good luck,
Alberto

How do I distribute an executable from Labview 8.6

I have Labview 8.6, Professional Development version. I want to know when I create an EXE file and then want to run it from a computer that does NOT have Labview installed, what support files will I need? What directory will I find them in on the computer with Labview installed? And what directory will I need to put them in on the computer that does not have Labview on it?

Ben321 wrote:
How do I make an installer package? Do I have to make one with external software like InstallShield? Or does labview do this when you make the EXE file to start with? Or does labview have a separate feature to do this? Please explain?
You create an installer in a similar way you create an application. It's all built into the LabVIEW project.
Details
LabVIEW Champion . Do more with less code and in less time .

How do you generate an executable in LabVIEW 8.6?

Similar Messages

Maybe you are looking for