HOw do you get connected to internet on sun solaris 10 ?

Hi Guys,
What a shame but i am done with solaris 10installation but anyhow i could use the internet ?
What should i do for it ?
Thanks for helps

Juergen, drydog, John_Berger ... you guys are providing fabulous information on these forums.
I have been struggling for a few weeks to get 4 machines on the network. All these machines run fine with WinXP and Linux.
Environment: SunOS 5.10.1 snv_09
- Supported NIC: I think I have one; useful to confirm
Boot Configure ... press ESC ... Identified Devices
PCI: Intel 82801DB PRO/100 VE Ethernet
PCI: Intel i815/82559 Ethernet
"Loading ata.bef"
" Hostname: solarisXnu"
scanpci:
Intel 82801BA/BAM/CA/CAM Ethernet Controller
prtconf -D
pci8086, 1130 (driver not attached)
ifconfig -a
iprb0: ... inet 192.168.1.120 ...
ping 192.168.1.120 ... alive
/etc/defaultrouter ... 192.168.1.1
/etc/hostname.iprb0 ... solarisXnu
ping 192.168.1.1 .... nothing
/boot/solaris/bootenv.rc ... nothing recognizable for e/n
netstat -f inet
solarisXnu.37316 ... connected
netstat -i -n
Name Mtu Net/Dest Address ...
iprb0 1500 192.168.1.0 192.168.1.120 ...
traceroute -a 192.168.1.1
"ifaddrlist: SIOGLIFCONF: error 0"
arp -a
iprb0 solarisXnu 255.255.255.255 SP <physadr>
snoop
solarisXnu -> (broadcast) ARP Who is 192.168.1.1
/boot/solaris/devicedb/master .... does not contain 1130
Duplicate line: "pci8086,103d ..."
pci8086,1130 pci8086,1130 net pci iprb.bef "Intel 82801DB ..."
/etc/driver_aliases ... Duplicate line "iprb ... 103d"
iprb "pci8086,1130"
/etc/nsswitch.conf
ipnodes: files dns
hosts: files dns
Run: "sys-unconfig" (this is overkill; sometimes it helps)
iprb ... iline value out of range: 0
Configuring network interface addresses: iprb0
After modifiying devicedb/master and driver_aliases:
prtconf
pci8086,1130 (driver name: iprb)
snoop:
solarisXnu -> gw DNS C _nfsv4idmapdomain. Internet TXT ?
I have no idea what this means, but I still cannot ping 192.168.1.1 (gw)
ping gw
snoop output:
solarisXnu -> gw ICMP Echo request (ID: xxx Sequence : yy)
I have a shell script to force some settings ... it's not working.
net.sh ifconfig iprb0 inet 192.168.1.120 netmask 255.255.255.0 broadcast 192.168.1.255 up
route add default 192.168.1.1
arp -s gw 00:0c:41:d1:b4:cc
hostname solarisXnuI'm getting desperate :-)
Any clues from the gurus ?

Similar Messages

  • How do I setup high speed internet on Sun Solaris 10?

    Hello,
    I have comcast high speed internet. It doesn't work automatically. How can I setup my high speed internet connection to work with Sun Solaris 10?
    Mateusz

    Pickup a broadband router, made by dlink, linksys, netgear, SMC or Cisco. If possible get a wireless with 4 port switch built in. This will give you added flexibility if you happen to get another system or a wireless laptop. You want a gateway router that does NAT, SPI firewall, DHCP.
    Plug it into your cable modem then into your sun box, default settings on the router will generally self configure to the broadband you connect to and there will be no problems. However if you are using a DSL or bigpond they require a username and password to get the line active, this requires an initial login to the firewall to pick PPoE on the WAN side.
    Different brands default to different 'non routeable' internal IP's, all are 192.168.x.x, smc defaults to 192.168.1.x or 192.168.2.x depending on release date, Linksys defaults to 192.168.2.x as does linksys, Netgear defaults to 192.168.1.x, the owners manual will usually tell you this.
    They are generally made to default to a windows box so configuring a unix box has to be done either manually or with the dhcp option. www.dslreports.com has alot of good vendor specific information on configuring these things.
    At any rate you need to create a file in /etc called 'defaultrouter' with the routers IP address, in the smc case it would be 192.168.2.1, pick a couple of outside DNS servers and put them in a file in /etc called resolv.conf in the format
    nameserver xxx.xxx.xxx.xxx
    nameserver xxx.xxx.xxx.xxx
    copy nsswitch.dns nsswitch.conf
    pick an address in the 192.168.2 range like .25 and add it in the /etc/hosts file, create a hostname.hme0 file with the host name thats in the hosts file and reboot.
    Then try to ping the router, if no ping then the chang the 3td octet 1 instead of 2 and try again.
    I've never tried doing the .dhcp thing but I've never used dhcp for a sun box before because all I do is servers.
    I think I'd try the DHCP thing first then get to the router to get all it's information and write it down. Usually the ISP will populate the router with dns servers and any dns requests are answered by the router in the dhcp configuration. I think thats about it...

  • HELP with Thinkpad 380XD - how do you get on the internet?

    I have an older thinkpad 380 XD which seems to be working fine.  It has been in the closet for a while but just charged it and it is working well.  I can't figure out how to get onto the internet though.  Any clues?? I have searched the boards, this website, downloaded the manual - none of these address how to connect to the internet.  THis laptop has one USB port, a bunch of pin ports, a pop out for telephone line for a fax modem, but I can't figure this out.  I am a Mac user so this is new to me.
    Can anyone help me with this?

    I would strongly suggest getting a PCMCIA LAN card and going broadband...
    More info on that fine classic ThinkPad here:
    http://www.thinkwiki.org/wiki/Category:380XD
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • How do i get connecting to internet on my new solaris system

    I installed solaris 10 on my HP_Pavillion system. whenever i boot my system the network configuration goes to hell
    i can read inteface
    rtls0 is up with 100Mbps and the next line
    show rtls0 is down and then
    skipping rtls0 configuration.
    i have a broadband connection
    Please Help me set up my PPPoE account on my Solaris OS 10.
    Armando KAKOU

    You need to authorize the computer to play content from that Apple ID. If it's completely inaccessible, click here and request assistance.
    (89922)

  • How do you get wireless on your windows side of the computer

    Hey,
    I have a macbook and i use a air port express for my wireless internet on my mac side of my computer how do you get your wireless internet set up on the windows side of your computer. i can't figure out how put it on there at all so im guessing that there some thing wrong with boot camp. I'm 13 so make it simple

    Louser500:
    Welcome to Apple Forums.
    Did you install the boot camp drivers as soon as you installed Windows on your boot camp partition? If not then:
    1) Boot up in Windows
    2) Insert your Leopard Installation CD in the disk drive
    3) Windows should automatically begin installing the Boot Camp Windows drivers which includes the wireless connection.
    4) Once the process is completed then you should have access to the wireless connection (Ensure that you choose the right network to connect, the security type and password which will the same as your Mac OSx side).
    Axel F.

  • How can you get your ipod touch open when you forgot the password and its disabled and not connected to wifi

    How can you get your iPod touch open when you forgot the password and its disabled and not connected to the Internet Connection and you don't want to reset it.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • I have just bought a ibook g4  how do you get the internet

    how d you get the internet working from the airport , i have an airport extreme and the spec says airport how do i connect to the internet

    You can connect to the Internet via the Ethernet port or wirelessly. To connect either way you need to have internet service from an Internet Service Provider, or via Wi-Fi. To connect wirelessly at home you need a wireless router like an Airport Extreme base station.
    Please do post back with further questions or comments if any.
    HAPPY HOLIDAYS!
    cornelius

  • HT4101 Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud.

    Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud. I am able to see any photo I took on the iPad using the iPad camera (in iTunes, photo stream, or when I open windows explorer and browse the iPad director), however I cannot see any photos transfered from my camera to the iPad. The camera connection kit must have put my photos in a directory I cannot get to and cannot sync.

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • How do you get your iPhone to stop connecting to face time while on a voice call? And it also does this when I'm on the phone with someone who doesn't have an iPhone. I look down at my phone while on a call and it says connecting to face time

    How do you get your iPhone to stop connecting to face time while on a voice call? And it also does this when I'm on the phone with someone who doesn't have an iPhone. I look down at my phone while on a call and it says connecting to face time

    How are you dialing these calls?

  • How do you get your ipod to get out of the "connect to itunes screen"?

    How do you get your ipod to get out of the "connect to itunes screen"?

    Connect the iPod to your computer and restore via iTunes.
    iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad

  • How do you get your iphone out of the connect to itunes screen?

    How do you get your iphone out of the connect to itunes screen?

    What error message is it displaying? Check this Apple support document for information on specific error messages when restoring the iPhone. http://support.apple.com/kb/ts1275

  • HT4993 How do you get your iPhone to stop connecting to face time while on a voice call? And it also does this when I'm on the phone with someone who doesn't have an iPhone. I look down at my phone while on a call and it says connecting to face time

    How do you get your iPhone to stop connecting to face time while on a voice call? And it also does this when I'm on the phone with someone who doesn't have an iPhone. I look down at my phone while on a call and it says connecting to face time

    How are you dialing these calls?

  • Once you have downloaded ESX24 samples from the internet how to you get them on to logic to use them ?

    once you have downloaded ESX24 sample packs from the internet how do you get them on to logic so you can use them ?

    Mac App Store: Hiding and unhiding purchases
              http://support.apple.com/kb/HT4928

  • How do you get iPhone 5 to connect to iMac through bluetooth?

    How do you get iPhone 5 to connect to iMac through bluetooth?
    I know the basic steps, but all I get is pairing unsuccessful. I'm using an older bluetooth, would that make a difference? I got connected once with a Motorola bluetooth, but can't reconnect. TIA!

    Try the Bluetooth Troubleshooting steps here:
    http://support.apple.com/kb/TS2756
    Note that you need to have Personal Hotspot set up with your carrier and on your iPhone before you can connect the computer.
    Regards.

  • If you dont have the sim card that came with the iphone and you resync it how do you get it to turn back on .?

    if you dont have the sim card that came with the iphone and you resync it how do you get it to turn back on .?

    You have been syncing the iPhone with iTunes on your computer without a SIM card inserted in the iPhone for how long?
    If the iPhone says connect to computer, this means there is a problem with your iPhone that requires restoring the iPhone with iTunes. As already provided, not having a SIM card inserted in an iPhone does not prevent or shouldn't prevent syncing the iPhone with iTunes. Depending on the iPhone model, it is required in order to restore the iPhone with iTunes.
    http://support.apple.com/kb/ht3406
    To re-activate an iPhone 3G or iPhone 3GS that displays the "Connect to iTunes" screen:
    Insert a SIM card from the carrier with which you used your phone. Note: If you are using the same carrier, you can use the activated SIM card from your new device to do this. If your device is unlocked by your carrier, you can use any SIM card.
    Connect the iPhone 3G or iPhone 3GS to iTunes on a computer connected to the Internet.
    iTunes will then activate the device. You can remove the SIM card at this point and use the iPhone as if it were an iPod touch.

Maybe you are looking for

  • File from application server

    Hi Guys, I want to pick file from application server as an attachment and send as mail. Thanks

  • How to downgrade from Windows 8 to Windows 7 on m72e tiny

    Hi, I have a tiny format m72e currently running windows 8. I need to be able to run software that works on windows 7 but not on windows 8. How should I downgrade this machine to windows 7? Can I buy an upgrade to windows 8.1 pro and then use downgrad

  • Your liveCache DATA_CACHE is full.

    Hello Guru's We are facing problem in our development server.Please guide us to resolve this issue. As per EWA reports - Its saying that Your liveCache DATA_CACHE is full. As per our observation Filesystem                   Capacity [MB] Free space [

  • Access over dblink

    Hi, I have 2 databases DB1 and DB1. There is one user U1,U2 in DB1 and DB2 databases respectively. U2 owns a table T1 in DB2. U1 want to have select privliege on U2's T1 table. How should one go about it ? Thanks

  • Failover interface failed

    Hi,    I have 2 ASA 5520 firewall configured with HA(Failover). but some time my primary firewall goes down standby firewall doesnt come active. i found below log from primary firewall..what is the reason & what is the mining of reason code of 4... N