How do you get dojo widgets (javascript library) to work in a portlet

I am trying to get Dojo widgets (the JavaScript library or toolkit, http://www.dojotoolkit.org/) to work in portlets, but have not gotten past errors "could not load" for the widgets. I have tried widgets in both dojox and dijit. Has anyone gotten this to work?
WCI uses a version of Dojo from 2007 internally, and appears to assign it to the "auidojo" namespace. I tried implementing a suggestion using djconfig to use the namespace "mydojo" for the installation of the current Dojo version, which I have put on the imageserver. Using Firebug, it appears that dojo.js as well as the paths to the widgets are recognized (using modulePaths) and used correctly.
I am not a Dojo guru, so suggestions from someone who has this working would be appreciated!

Here is a sample image from a previous plan completed a few versions back.
All that was done.. was to create a green fill, hundreds in this map. Have all lawn elements on a single layer. Select the layer, apply the photocopy effect, change the detail and darkness options to achieve this look and apply. It kept the green color, and applied the photocopy effect to the fills.
Now it changes the object or objects to black and white. The plans that are rendered are to large to rasterize and recolorize objects. Copy the lawn layer with all the filled objects, placing the copied layer on top and applying the photocopy effect to it, plus a transparency... then shifts the color rendition of the underlying object.. I am playing a guessing game of transparency adjustment and, picking the correct green shade underneath to achieve the same effect, almost impossible to match and way to time consuming.
I cannot get blending to work on separate fills with the photocopy and based on trial and error with that method... applying the effect to hundreds of fills would crash the file and my system.
What was... was perfect...now.. a great simple effect has been removed from my toolbox... struggling with finding a replacement.

Similar Messages

For. iBooks, at the end of the book how do you get back to the library ?

At the end of a book in IBook how do you get back to the library ? I am stuck on the last page of the book.

tap on the middle of the book, in the upper left hand corner you will see a Library button. select that to return to your library.

How do you get USB debugging for AIR iOS working?

How do you get USB debugging for AIR iOS working?
Here is my current configuration:
Flash Builder 4.6
Flex 4.6.0 (build 23201) with AIR 3.3 Beta and Flash 11.3 Beta playerglobal.swc (both merged in to the current Flex build)
Flex 4.6 release: http://www.adobe.com/devnet/flex/flex-sdk-download.html
AIR 11.3 Beta: http://labs.adobe.com/technologies/flashplatformruntimes/air3-3/
Flash Player 11.3 Beta: http://labs.adobe.com/downloads/flashplayer11-3.html
I read through the Flash Player 11.3 and AIR 3.3 release notes (http://labsdownload.adobe.com/pub/labs/flashplatformruntimes/shared/air3-3_flashplayer11-3 _p1_releasenotes.pdf) and this is all that is stated:
USB debugging for AIR iOS iOS developer can now connect directly? to the desktop via USB to debug mobile applications.
Every other feature seems to have a description of how to accomplish it other than USB debugging for AIR iOS.
Anyone else get this working?
The main reason I want to get this working is because our IT department is very strict on our firewalls and it is relatively hard to open the required ports to debug on our own devices through the network.

I've found one way of doing it using command-line on Windows. I'm sure someone will make it easier by building it into something like a FlashDevelop template soon.
Steps are...
1. Add a "-listen 7936" param to the packager. Something like, "adt -package -target -debug-interpreter .... -listen 7936". Install IPA on device.
2. Find out the handle of your iOS device by running "lib\aot\idb\idb -devices". In my case it is "2". Will look something like...
List of attached devices
Handle UUID
2 {your UUID here}
3. Forward the local_port to the remote_port for the device_handle. Something like "lib\aot\idb\idb -forward 7936 7936 2".
4. Start Flash Debugger in another command prompt from your FlexSDK directory. Something like "flexsdk\bin\fdb -p 7936".
5. Run your app.
6. Type the "(fdb) run" command in the debug command line.
7. May need to type "(fdb) continue".
Hope that helps.

How do you get the jukester jukebox app to work vertically so I can use in a tabletop jukebox machine

How do I get the jukester jukebox app to work vertically instead of horizontally-so I can use it in a jukebox?

If other apps can rotate and use vertically then the Jukebox developer did not include this functionality.
Write to them:
http://www.jukesterjukebox.com

HELP! how do you get songs from your library ...

i'm having trouble getting songs from my library to my ipod. HELP!!!!!1
Dell? Windows XP ?????

James, you are going to have to be a lot more specific as to what's going on when you try to sync your music to your iPod before anyone has a clue on how to start to help you. Please include what kind of iPod you have, what version of iTunes you're using, any error messages or error codes that are happening. The more information you post, the better chance you have of getting some help.

How do you get a playlist of music to work on the basic Photo App which comes with ipad 2 - to have to play the same tune over and over again with a slideshow is rubbish !

How does one get a varity of music i.e a playlist to work on the standard Photo App which is shipped with Ipad 2 when using a slideshow ?

if you have music in your library, when tapping on slideshow a menu appears - Turn on music option. when on a song should display below it - tapping it will take you to your library.
Photo App will give you access to all albums as set in settings\Photo
Camera - select camera roll - gives camera roll only but options for everything else
Slideshow timings is under Settings\Photo

How do you get your wi-fi sync to work on your iPhone?

It says "Automatically sync with iTunes on your computer when your iPhone is plugged in to power and conncect to wifi" Which they are but for some reason my computer doesn't register that my iPhone is there? How do I get it to work?

Connect your iPad to your computer using a cable, and uncheck the box on the summary pane of iTunes that says Sync over Wifi. Sync again, and then check the box so that the system will set up to sync over the new Wifi network.

HT1386 Once you have synced photos to your device how do you get them from photo library?

Please help!

From the photos app. That is where the photos are stored in the iPad. What do you want to do with the photos from here once they have synced to the ipad?

How can you get a non-usb microphone to work?

So i've run into a few discussions on this topic, but never seen an answer to it. I have a non-usb microphone (A HyperX Cloud headset) that I want to use with my MacBook Pro. How can I do this? I'm assuming there is an adapter I can get for the microphone to work, right?

You will need a mic interface, you can get a pretty decent one for around $100, check this one out! http://www.amazon.com/Focusrite-Scarlett-Solo-Compact-Interface/dp/B00MTXU2DG/re f=sr_1_2?ie=UTF8&qid=1426555875&sr=8-2&k… or an adapter from http://www.amazon.com/IK-Multimedia-instrument-microphone-interface/dp/B00C68MZX E/ref=sr_1_1?ie=UTF8&qid=1426555978&sr=8… Sorry there is no other way around it.

How do you get the Photos 'subscribe' button to work.

So i've been trying to figure out how to use the 'subscribe' button in iphoto. I'm guessing this means someone will get an email everytime I post a new photo, if they click subscribe? When i click it on my site it goes to a 'page not found' page. Here's my website: www.southbaycruisers.com
Any suggestions on how o fix this would be appreciated. Thanks in advance!

When you "publish to a folder" do you have the correct URL in the box?

How do you get 32-bit float effects to work with an alpha channel?

I make a few bugs and lower thirds, but I'm having a lot of trouble getting 32-bit float effects to correctly export with transparency.
When I make semitransparent animations with bright lighting effects, they look great in AE but I can't seem to find any way to bring them over to Final Cut and get them to look like they should.
I've attached this example of a bug with a screenshot from AE on the left and from FCP on the right. The colors dim and the vibrant blue gradients get flattened into a dull greenish color.
So far as I can tell, all my alpha and color management settings are correct. I've tried endless settings options and codec options to try to fix this, to no avail.
You can create an extreme case as an example by creating a semitransparent shape, cranking the color way up to a saturated superwhite color, and moving it around with motion blur. The render looks pretty much just like a 8/16 bit render, and nothing like it did in your canvas.
I have a feeling the way AE multiplies the superwhite color values with the alpha channel gets "lost in translation" when it is rendered to 4 8-bit channels. Is there any way to get it to look the way it does in the canvas?
Thanks,
Clint

Thanks so much for your ideas. I'd already tried experimenting with a number of color management options, including 'Preserve RGB' and turning off 'Convert to Linear Light' but they didn't fix it. I had also already tried using the "None" option from the codec menu.
I pulled it back into AE, and it looks the same as it did in FCP.
I'm starting to think the issue has something to do with AE rendering to a file differently than the way it renders to the canvas. For example, here's a fast moving 50% opaque superwhite shape in the AE canvas:
I rendered this using Animation + Alpha using Best settings and 32-bit float, and reimported it into AE:
I think the answer may lie in the fact that the first image looks solid white in some places, even though it is 50% transparent. It's almost like the excessive RGB values "bleed" over to the alpha channel. The rendered image (probably correctly) looks grey because it represents white at 50% opacity.
What I want to do though, is find a way to make my render look like my canvas. So it seems I need to do two things to the image:
1. Find a way to increase opacity in areas of excessive white, so that they are not grey in the render.
2. Find a way to "bake" the superwhite colors to a level below 100% white so that they show up in the render.
I tried the "Alpha from Max Color" effect and this seems to get kind of close, but unfortunately it discards other parts of the alpha channel (like drop shadows).
It might also be helpful to know that when I have AE output to an external NTSC monitor (via Intensity card) the monitor shows the exact same artifacts as the render.

How do you get the built-in camera to work

I have a new 20" IMAC. I set it up and was not able to get the camera to work. When I go to IChat the microphone enabled is checked and black but the camera enabled is checked but grey. When I go to Phone Booth it says that there is no camera or not connected. All I would like to do is take a photo of myself. PLEASE HELP
IMAC 20 Mac OS X (10.4.8)

Go to Apps/Utilities/System Profiler. In the Hardware list go to USB. Does the built-in iSight show up in the USB High-Speed Bus?
If not, could be a hardware issue and you should call AppleCare to begin troubleshooting with them for possible warranty replacement/repair.

How do you get the auto red eye to work in iphoto when it won't click?

When we are trying to correct the red eye problems from photos taken from my dads Sony point and shoot camera iphoto's automatic red eye option isn't enabled. We tryed to fix this by upgrading to the latest version of iphoto but the problem persists- the autocorrect for the red eye won't click. We are feeling ripped off because it should work. Right?

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If it does try the following: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If the red eye correction works OK in the new library do the following on your original library: make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Note: the following is for iPhoto 9.4
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

How do you get Illustrator 4 Photocopy effect to work in color?

In previos versions of Illustrator, I could take a fill object ..with any color applied, and add the photocopy effect. This was a great tool to use, to illustrate and give texture to large patches of colors, which I used all the time in our site plan renderings (gras lawn effects).
Now in version CS4, when I go t oapply the photocopy effect to a fill, it automatically drops the color and changes the object to black and white. This defeats the purpose of being able to apply an effect to a colored object if the setting returns the color to BW. Not sure if I have something clicked wrong somewhere in Illustrator.. or is some programmer actually made this change... and dear god please change it back... it is a terrible update.
Help I need to apply effects to colored fills.... especially the photocopy effect.
Ben

Here is a sample image from a previous plan completed a few versions back.
All that was done.. was to create a green fill, hundreds in this map. Have all lawn elements on a single layer. Select the layer, apply the photocopy effect, change the detail and darkness options to achieve this look and apply. It kept the green color, and applied the photocopy effect to the fills.
Now it changes the object or objects to black and white. The plans that are rendered are to large to rasterize and recolorize objects. Copy the lawn layer with all the filled objects, placing the copied layer on top and applying the photocopy effect to it, plus a transparency... then shifts the color rendition of the underlying object.. I am playing a guessing game of transparency adjustment and, picking the correct green shade underneath to achieve the same effect, almost impossible to match and way to time consuming.
I cannot get blending to work on separate fills with the photocopy and based on trial and error with that method... applying the effect to hundreds of fills would crash the file and my system.
What was... was perfect...now.. a great simple effect has been removed from my toolbox... struggling with finding a replacement.

How do you get the two step security to work with virtual machines running under parallels?

I use Quickbooks running on a virtual PC under Parallels. I have always have Quickbooks interface with Thunderbird on the PC side to email invoices to customers using my apple email account.
Once I switched to two-step verification security, Apple doesn't recognize the "new" computer trying to access my mail account, but it also doesn't send any kind of code to a second device to authorize the access.
For now, I've had to switch back to the traditional security and the above process immediately works again 9without asking me any security questions).
Is there a way to have Apple recognize the virtual PC (or any other non-Mac computer) with two-step verification security?

You have to go to your Apple ID and generate application specific passwords.
Apple ID - Manage

How do you get dojo widgets (javascript library) to work in a portlet

Similar Messages

Maybe you are looking for