How do you hide error messages thrown by a dashboard

OBIEE 10g; Anyone know how to edit error messages thrown by analytics. The text in many messages has been identified to us as a security vulnerability because the text contains sensitive information such as server host names and the logical queries themselves which could be used by an attacker. This includes particularly errors thrown by the logon screen before the user has even been authenticated. What I would like to do is edit the messages to say something like "Error 100058 Please contact support"?

hi
i never tried with error message, not sure whether works or not..
try this: http://bischool.wordpress.com/2009/08/26/avoid-running-report-for-all-values-on-dashboard-when-using-multi-select-prompt/
also
http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-selecting-reports-from-dashboard-prompts-and-guided-navigation-sections/
try to implement this kind of logic..

Similar Messages

How do you fix error message "There is a problem with Adobe Acrobat/Reader. (6:6)

How does one fix error message "There is a problem with Adobe Acrobat/Reader.
If it is running, please exit and try again. (6:6)

http://www.essexinfo.net/queens-road-residents-association/assets/documents/village-voices is one example but a whole lot of the material which has been uploaded as pdf files over the last four years is now unviewable - if you click on the link you just get a black page. The main site url is http://www.essexinfo.net and our site is the Queens Road Residents Association. I have just gone through every link on the site and a number of links when clicked on will not bring up the material. I tried going into Adobe 10 on my computer and disenabling protected mode as was suggested on your forum and at first when I went back into the essex info site it seemed to have worked when I clicked on a link that had only produced a black page. However when I went back to test all the other links I found that the problem was still re-occuring. This is really weird as the site and my connections to it which I sometimes make by directly accessing the site and sometime via a link from our QRRA blog have always worked perfectly with no problems up to now. I downloaded adobe 10.1 on 8 March 2011.
I contacted essexinfo separately but they said everything seemed to be OK at their end working from within the system.
If you can help I would appreciate it.
Pat

How do you clear Error Message 3100? After installing the New inks, On NEW 'Canon MX432' Printer

Have NEW ‘Canon MX432’, (1)-followed the instructions to set language without problem, next step, checked for the Set ink cartridge Message, (2)-and then opened the Paper Output Tray and the Paper Output Cover.
On the second try; (3)-the Head Cover opened automatically, (4)-then lowered the Color Ink Cartridge Lever, (5)-Unpacked the FINE Cartridge and remove the protective tape, (6)-then Inserted the FINE Cartridge straight in until it stopped, (7)-and lifted the Color Ink Cartridge Lever.
Next did the same steps (8) - (9) - (10)- (11)-to the Black Cartridge, next (12)-Closed the Paper Output Cover.
*** Should I have waited and lifted both Levers at the same time? ***
(13)-Waited for printer, (14)-got error Message; ”Printer Error occurred”, then the numbers; “5100”.
Have tried unplugging the printer a few minutes and repeating the steps from the start to no avail.
Next will go buy new Ink and try again or return this Canon MX432 Printer, for a different Model.
Do not want to install new Ink Color and Black Cartridges until I understand the problem solution.
Have used Canon products for over 30 years never had this problem or any problems with their products which could not be resolved by me.
Steps Followed:
*** Do you see a problem with these steps taken? ***
(1)- Set language
Waited for the “Set ink cartridge” Message
(2)- Opened the Paper Output Tray and the Paper Output Cover
(3)-The Head Cover opened automatically
(4)-Lowered the Color Ink Cartridge Lever
(5)-Unpacked the Color FINE Cartridge and remove the protective tape
(6)-Inserted the FINE Cartridge straight in until it stopped
(7)-Lifted the Color Ink Cartridge Lever
(8)-Lowered the Black Ink Cartridge Lever on the left
(9)-Unpacked the Black FINE Cartridge and remove the protective tape
(10)-Inserted the Black FINE Cartridge straight in until it stopped
(11)-Lifted the Color Ink Cartridge Lever
(13)-Closed the Paper Output Cover
*** Should I have waited and lifted both Levers at the same time? ***
(13)-Waited for printer
(14)-Got error Message: ”Printer Error occurred”, then the numbers; “5100”

Hi Anselmo_MSW!
It looks as though you have followed the correct steps and no, you do not need to lift up both levers at the same time.
The error code 5100 indicates that an internal error has occurred which may be resolved by resetting the printer. Please follow these steps for isolating and resetting the printer:
1. Open the printer's front cover, and then open and close the print head lock lever (do not remove the print head).
2. Make sure all ink tanks are seated properly.
3. Make sure all packing materials have been removed.
4. Make sure no paper is jammed in the printer.
5. Disconnect the printer cable from the printer.
6. Close the front cover and turn the printer off.
7. Unplug the printer from the power source, and then plug it back in after five minutes.
8. Power on the printer.
If the error returns, the printer will require service options. I realize you have just purchased this and wanted to let you know that this is not the normal operation of our printers. What I would recommend is contacting a Canon Representative using the following link to learn of your service options. Contact Us.

How do you hide the Page Options button on dashboards in 11g?

Hello,
I would like to hide the "Page Options" button on a dashboard in 11g. I found some examples on how to do it in 10g, and they all talk about editing a file called dashboardtemplates.xml. I can't find this file on my 11g BI server, so I'm assuming the file was part of 10g but not 11g. Has anyone figured out how to hide the "Page Options" button on a dashboard in 11g?
thanks,
Scott

Hi Satya,
thanks for your reply, but I have a feeling that your solution is for obiee 10g and not for obiee 11g. We are using 11g, and when running Analytics (Answers), I don't see a "Settings" option, but I seem to recall that in 10g there is a "Settings" button/link. Also, I don't understand how your solution answers my question. You describe how to grant "everyone" read permissions on dashboards, but I want to know how to hide the "Page Options" button on dashboards.
Sincerely,
Scott

How do you fix error message "data rate for this file is too high for DVD. You must replace this file with one of a lower data rate".

When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD. You must replace this file with one of a lower data rate". We need help to correct this so we can complete burning to DVD.

What did you export from Premiere?
Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

How do you fix error message "100008"?

When I try to download songs, it says can not because the file is corrupted and to download it again. But no matter how many times I do that I get the same message. Anyone else have this problem?

# Type '''about:support''' in URL
# Goto Profile Directory labeled "Open Containing Folder" click that to open
# Close the firefox from background too
# Rename the file cert8.db to back_cert8.db
# Open the firefox and try it out

How do I fix error message "This document contains a link to an asset being upsampled. You should resize it smaller or right-mouse click on the asset in the Assets panel to see additional options." Which asset is it?

I ab in Muse. How do I fix error message, This document contains a link to an asset being upsampled. You should resize it smaller or right-mouse click on the asset in the Assets panel to see additional options.

You should ask in Help with using Adobe Muse CC
This Cloud forum is not about using individual programs
This Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

How do you hide incoming text messages on the iphone 4 to just show the name of the person sending the text instead the entire text message?

How do you hide incoming text messagtes on the iphone 4. I can do on the 3G. Can it be done on the 4?

Settings>Notifications>Messages. Turn Show Preview to off.

How to customize the error messages in web analysis reports

Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?

Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri

How can we trigger error message in BADI PARTNER_UPDATE

Hi All,
I have implemented a BADI PARTNER_UPDATE. In this I have validation ( Error Message ) on saving buisness partner.
It is giving the error message but it freeze all the fields. On pressing enter it goes for short dump.
In short dump it gives error The COMMIT WORK processing must not be interrupted.
Kindly suggest me that how can we pass error message and it also does not freeze the fields.
Regards,
Narendra Goyal

Hi Narendra,
How are you trying to display message.
Is it using message service class instance of message statement (which should not be used, as that is for GUI messages) or using collect FM or by adding to genil message class container.
Please try different approaches and see what works for you.
Thanks,
Rohit

How to fix this error message The backup disk image "/Volumes/AirPort Disk/FARES DEL VALLE's iMac.sparsebundle" could not be accessed (error -1).

how to fix this error message The backup disk image “/Volumes/AirPort Disk/FARES DEL VALLE’s iMac.sparsebundle” could not be accessed (error -1).

The troubleshooting C17 is the specific article.
http://pondini.org/TM/Troubleshooting.html
This is generally a Lion error.. and you will need 5.6 utility to get access to the disk area.
So download the real utility. Run it instead of v6 toy version.
http://support.apple.com/kb/DL1482
Go to the manual setup, disk page and click on disconnect all users.. that will unmount all users connected to the disk and allow it to start working. But there are a number of other issues that are possible cause. Pondini lists some of them.

How can you hide a Continue button until all clickboxes are clicked?

I have seen similar questions to this one, but none seemed to be the exact situation as mine.
What I have: Several images on a screen. When a user clicks an image it is replaced with another image. I am using clickboxes for this task. I do not wish for them to toggle back and forth. Once they click the original image it should stay changed.
What I am trying to do: Once a learner clicks all the images (in no particular order) a Continue button appears that allows them to go to the next screen.
If anyone has some suggestions on this situation please let me know, thanks.

I cannot log in on the forum for the moment, so will try by answering by
mail. I was aware of that problem (have presented those solutions so
often), thought that since you left all images visible once the click box
was clicked it wouldn't be a problem.
Two possible solutions:
   1. Easiest one: add a statement in the Always decision that will Hide
   the click box just clicked. It has no sense to click it another time. That
   will mean that you still can do it with a shared action but that shared
   action will have two parameters now, the second one being the click box
   that has to adapted on each application of the shared action.
   2. If you don't want to make the click box hidden (which means at the
   same time disabled), you'll need a user variable for each click box,
   starting with a default value of 0, and toggle it in the Decision 'Always'
   to 1. The second decision will then need a condition that checks the value
   of all the user variables (with AND) and shows the Next button only when
   all variables have the value of 1.
Sorry, but have to mail, cannot offer a screenshot in that case.
Lilybiri
2014-03-13 5:31 GMT+01:00 Joseph_McDonald <[email protected]>:
    Re: How can you hide a Continue button until all clickboxes are
clicked? created by Joseph_McDonald<http://forums.adobe.com/people/Joseph_McDonald>in *Advanced
Adobe Captivate Users* - View the full discussion<http://forums.adobe.com/message/6205043#6205043

How to display an error message on screen?

Hi experts,
In screen painter, how to display an error message in the message area just below the screen?
Thanks!

hi wuyia,.
Write like this;
Message 'Process completed Successfuly' TYPE 'S'.
Message 'Want to Overwrite Value' TYPE 'W'.
Message 'Press enter to continue' TYPE 'I'.
Message 'Invalid Input' TYPE 'E'.
S - Success
W - Warning
I - Information
E - Error
You can adjust your GUI option to display the message in a Popup or in the status bar.
Regards
Karthik D

How to configure a error message

Hello,
I have a User bean that hold informations about a user login ( login and password ). I write a method protected String logon() that search if the login and the password entered by the user match with those stored in a database. If not, i would like to add an error message to the FacesContext and so return null value.
My question is : how to add an error message to the FacesContext and so to get it in the current page.
Thanks

Hi flam70,
well, in my opinion you should do any access to your business logic in an action class and in the invoke application phase and not in the validation phase.
Your Action class returns e.g. "success" if the user passed the authentication and "null" if not (if jsf gets null value it returns on the same page back)
To put the error message into context you may do following:
In the invoke() Method of your Action class do authentication against your database.
If it fails, use the component(s) that were wrong for the error message(ids e.g. "username" and "password").
Add the message into context:
context.addMessage(nameComponent, new MessageImpl(Message.SEVERITY_INFO, "Username not found !", "LoginError"));
context.addMessage(passwordComponent, new MessageImpl(Message.SEVERITY_INFO, "Password wrong !", "LoginError"));
On your jsp page you use the error tag:
<h:output_errors for="username" />
<h:output_errors for="password" />
Greetings,
Rene

How to get the Error message from hr_contact_rel_api.create_contact

Hello All,
I am using this API for creating a contact for an employee in R12.
But, some times i am not able to create the contact successfully, and Unable to figure out proper reason for record erroring out.
I dont find any out msg data variables for this API in order to check it for the Error.
So, can any body help me how to get the ERROR Message for such APIs.
Thanks inAdvance,
Amarnadh Js

user12243334 wrote:
solved the issue on myselfIt would be nice if you could share the solution with us.
Thanks,
Hussein

How do you hide error messages thrown by a dashboard

Similar Messages

Maybe you are looking for