How do you fix error message "100008"?

When I try to download songs, it says can not because the file is corrupted and to download it again. But no matter how many times I do that I get the same message. Anyone else have this problem?

# Type '''about:support''' in URL
# Goto Profile Directory labeled "Open Containing Folder" click that to open
# Close the firefox from background too
# Rename the file cert8.db to back_cert8.db
# Open the firefox and try it out

Similar Messages

  • How do you fix error message "There is a problem with Adobe Acrobat/Reader. (6:6)

    How does one fix error message "There is a problem with Adobe Acrobat/Reader.
    If it is running, please exit and try again. (6:6)

    http://www.essexinfo.net/queens-road-residents-association/assets/documents/village-voices is one example but a whole lot of the material which has been uploaded as pdf files over the last four years is now unviewable - if you click on the link you just get a black page.  The main site url is http://www.essexinfo.net and our site is the Queens Road Residents Association.  I have just gone through every link on the site and a number of links when clicked on will not bring up the material.  I tried going into Adobe 10 on my computer and disenabling protected mode as was suggested on your forum and at first when I went back into the essex info site it seemed to have worked when I clicked on a link that had only produced a black page.  However when I went back to test all the other links I found that the problem was still re-occuring.  This is really weird as the site and my connections to it which I sometimes make by directly accessing the site and sometime via a link from our QRRA blog have always worked perfectly with no problems up to now.  I downloaded adobe 10.1 on 8 March 2011.
    I contacted essexinfo separately but they said everything seemed to be OK at their end working from within the system.
    If you can help I would appreciate it.
    Pat

  • How do you fix error message "data rate for this file is too high for DVD.  You must replace this file with one of a lower data rate".

    When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD.  You must replace this file with one of a lower data rate".  We need help to correct this so we can complete burning to DVD. 

    What did you export from Premiere?
    Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

  • How do I fix error message "This document contains a link to an asset being upsampled. You should resize it smaller or right-mouse click on the asset in the Assets panel to see additional options." Which asset is it?

    I ab in Muse. How do I fix error message, This document contains a link to an asset being upsampled. You should resize it smaller or right-mouse click on the asset in the Assets panel to see additional options.

    You should ask in Help with using Adobe Muse CC
    This Cloud forum is not about using individual programs
    This Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • How do you fix Error 2753. The File 'acrosup64.dll is not marked for installation. when trying to update

    how do you fix Error 2753. The File 'acrosup64.dll is not marked for installation. when trying to update?

    i have trid from the adobe website and from the auto update notice, however
    none have been successful. i am running windows 8.1 and i have another pc
    running the same 8.1 and that one has successfully updated.
    Philip P Copley
    P.O.Box 3155
    Norwood 5067
    South Australia
    [email protected]
    (08) 8431 6885
    0401 686 087

  • How do you fix error -3256 when trying to put ios 5 on my phone?

    How do you fix error -3256 when trying to put ios 5 on my phone? I have a mac. I have backed up everything....?

    I always get the same error 3256 (as Timothy98) when trying to download ios 5 on my upgraded iTunes in my macbook pro. Please help. I want to start using ios 5.

  • How do you fix Error: login keychain not found

    How do you fix Error: login keychain not found

    At some point, you reset your keychain to default in Keychain Access. That caused your login keychain to be renamed.
    Back up all data.
    In Keychain Access, delete the login keychain from the keychain list. Choose Delete References when prompted, not Delete References & Files.
    In the Finder, select Go ▹ Go to Folder from the menu bar, copy the text on the line below into the box that opens, and press return:
    ~/Library/Keychains
    A folder will open. Rename the file "login.keychain" in that folder to something like "login-old.keychain". Rename the file "login-renamed.keychain" to "login.keychain".
    Back in Keychain Access, select File ▹ Add Keychain from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file you named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred.

  • How do you fix error -1 that wont let me update,restore or back up on a IPod touch 1st generation

    How do you fix reeor -1 on an IPod touch that wont let me update or restore it

    Error -1
    Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    Also see:
    -1 error
    -1 error too

  • How do I fix error message "installer file is damaged"?

    I have tried to download an application that uses Abode AIR.  I always receive the same error message "Sorry, an error has occurred. The application could not be installed because the installer file is damaged.  Try obtaining a new installer file from the application author."  I have installed, uninstalled and reinstalled Adobe AIR and keep getting the same error message.  Does anyone know how to fix this problem?

    This usually indicates that the certificate used to sign the AIR install has expired.  Based on an archived discussion on this topic, you can search for SignatureTimeStamp in the signatures.xml file in the META-INF folder and, if it is not found, then the install has no signature time stamp and will not install after the certificate expires. 
    I'm having the same problem, but searching for SignatureTimeStamp is found.  The search returns the following:
    <xades:SignatureTimeStamp>
    So, it would appear that there is a Time Stamp for the Signature in my case so the install should not fail.   I would first check the above.  Since you cannot install the app, you can try to open up the installation file with the .air extension as a zip file and drill down until you find META-INF and then drill down to find signatures.xml.  Search for SignatureTimeStamp and see if it is found.
    In the meantime, I was wondering if anyone else in this forum can explain why the install fails for me even though I can locate <xades: SignatureTimeStamp> in the signatures.xml file in the AIR install file.

  • How do I fix Error Message = Out Of Memory Could Not Install or Delete Data"

    I have looked all over the internet and there is a lot of discussion about WHY this happens and a lot of discusion about what to do in the future to avoid this from happening.
    I need help with specific steps on how to delete the static image that is stuck on my desktop. The image is large and covers most of my screen. I have shut down, unplugged, let the machine rest....started up several times. Not working.
    The error reads "OUT OF MEMORY - COULD NOT INSERT OR DELETE DATA"
    Thanks!

    Probably you are running out of disk space. Can you interact with your Mac at all, or is the error  message preventing you from using Finder windows?
    I'd try to boot into Save Mode: This will only load a rudimentary version of Max OS X, needing less space, and will clean some caches. The Start Up will tale longer, however.
    When in Save Mode try to empty the Trash and to free as much disk space as you can, by deleting files.
    How much free disk space do you have right now?
    See:
    http://www.wikihow.com/Start-Your-Mac-in-Safe-Mode
    If you cannot access the FInder to free disk space, even in Save Boot Mode, post back.
    Regards
    Léonie

  • How do I fix error message "unable to load sync UI Corel localized.dll"

    How do I fix an error message "Unable to load sync UI Corel localized.dll"? All of a sudden I can no longer sync my Windows PC to my iphone. I also noticed that just prior to the problem occuring there was an itunes software upgrade that occurred. It may or may not be related to the problem.

    Hi Barrlee,
    Thanks for using Apple Support Communities.  If iTunes doesn't recognize your iPhone, this article may help:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If issues persist, a thorough removal and reinstall of iTunes would be the next thing to try:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Cheers,
    - Ari

  • How do you fix error code "907 Invalid COD"

    Attempts to download on my BB Torch 9850 fails and returns error message "907 Invalind COD".  What is the fix?

    Hello barkbeetle,
    I wanted to follow up with you on the 907 Invalid COD error code that you are receiving on your blackberry Torch 9850. Since the error message that you are getting is not common to the average user, I decided to investigate this issue a little further. After some research on blackberry's website, I found an article about this error message that you have. Even though RIM stated that there is not a permanent solution to this issue, this article has several workarounds to try. Below is the link of possible solution to your specific issue. As you provide additional information on your issue then we can continue to find a permanent resolution for you.
    http://bit.ly/WGvVJ
    Once you have tried the workarounds in the link below, please share your findings with the community as it may help another fellow blackberry user in the future.
    Thank you...
    ArnettH_VZW
    Follow us on Twitter @vzwsupport

  • How  do you fix error 13091, says it wont sync

    I keep getting an error message (13091) which says ipod cannot be synced after its  finished syncing.  what do i do to fix this?

    I think you mean 13019.
    iTunes: Error 13019 during sync

  • How do you fix error 3212?

    Does anyone know how to fix error 3212.  I have just bought a new iphone 4S and upgraded my iTunes but cannot access iTunes Store.  I have copied the libxml2.dll to the Mobile device Support folder, restarted the PC but no luck.  De-installed iTunes and started again but same error message saying I am not connected to the internet... but I am!  Please please help. Eileen

    Itunes error 3212 pops up everytime I try to connect to i-tunes store-Microsoft-Answers
    iTunes Store error (-3212)??
    See if any of these help.

  • TS3694 how do you fix error 1015?

    when i try to restore my iphone 3g it says that i have and error "1015" how do i fix it?

    we can't give help with jailbroken phones here, try the jailbreak websites.

Maybe you are looking for

  • Error while creating Frame work Purchase order

    Hi Gurus, We are trying to implement Frame work order process with following configurations. 1)Item cat  B for acc assingment Y 2)Allow  item catg B with acc *** K and Y.(How to config this in SPRO) So when i am creating a PO adopted through Purchase

  • Unknown space after text inset

    As seen in the picture below (also added link for larger picture, will be available 24 h ExtraZoom High Definition image #32005. Zoom in or zoom out high resolution photo.), there is a huge space between the inset (table broken across 2 pages) and th

  • Link to an unsampled asset?

    I'm getting the message "This document contains a link to an asset being unsampled. You should resize it smaller or right-mouse click on the asset in the Assets Panel to see additional options." Anyone know what this is referring to?

  • Error CLIENT_RECEIVE_FAILED  Error while receiving by HTTP

    Hi, I am working on a XML to flat file scenario where I am using MULTI Mapping to get multiple outputfiles.but in SXMb_MONI I am getting this below  error. and mesages are stuck in SMQ2. <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> - <!--

  • EJB Modul: SAP Enterprise Connector, configuring build path

    Hello, first of all I'm using SAP NW CE. I created an 2 Development Components, an EJB Module and a Enterprise Application(EAR). In the EJB Module I use the SAP Enterprise Connector to generate Java Proxy Classes to do RFC calls. In the EAR-DC I add