How do you invoke screengrab

Just added Screengrab via the add ins
== This happened ==
Not sure how often
== when I added the add-n

I have updated to firefox 4.0, I wish I hadn't,
the screengrab tool bar doesn't show or work ,
among other things ! and my computer is extremely
slow now since upgrading to firefox 4.0 !
It's more trouble than it's worth. I've tried using
system restore *failed*
At this point I would rather go back to the older version of firefox
How do I delete the 4.o ? (so messed-up)
How do I get the sceengrab toolbar back? -
btw it IS downloaded

Similar Messages

How do you invoke the customer satisfaction guarantee on HP photo paper?

OK, perhaps this is a silly question, but I can't find anything on the HP site or forums that addresses this. How does one invoke the customer satisfaction guarantee on HP photo paper? The instructions in the box (and website) tell me to call HP customer care. I did that, and spent 25 minutes having a technician tell me it was a problem with my printer (HP Photosmart C6180), my printer was out of warranty, and I would need to exchange it and pay a fee to upgrade to a newer model with a 1 year warranty. She seemed not to care or know anything about the customer satisfaction guarantee for paper; she was only trained to tell you the problem was most surely with the printer.
In case anyone here can help, I have the HP Premium Plus 4x6 glossy paper, and whenever I use it the picture quality is extremely poor--not at all what I expected from the paper. It appears the ink has "balled" up, and it looks very splotchy. I am setting the paper type appropriately when printing, and I use original HP 02 inks. When I use other photo paper to print photos, they come out perfectly. Having wasted quite a bit of ink and paper trying different things, I'm just not satisfied and would like to discuss this further with HP.

The only numbers available (I've just reached over and picked up a box of premium plus 4X6 from my supply shelves to look) are on the bottom end back of the box. They are directly under their corresponding bar codes; the Product Number (for 4X6 premium plus it's Q1978AC) and what looks like the SKU (on my box, ignoring the small 8 and 5 at either end, that reads 0873654213). Additionally, there is a "Lot Number" (printed in white dot printing on a gray box background) directly above the product number (which should have "US" in the upper left, and a string below that...mine is US00204805). There is no number on the back of the paper, just the HP logo and a string of 6 small dots under it in a diagonal pattern spread across it.
So, I expect they want all three; Product Number, SKU, and Lot Number...the last likely so that that can pull a lot sample from their QA inventory and attempt to reproduce the issue back at the lab.
Hope that helps.
H
Message Edited by HLansing on 08-14-2009 06:15 AM

How do you invoke Edge Web Fonts?

Assuming this is available in this release, how to you bring up the Edge Web Fonts capability?

Hi Phil,
You should be able to trigger the code hints manually anywhere in the font-family value by pressing Ctrl+Space. It should also pop up automatically if you type "," followed by a space anywhere in the value. Are those approaches not working for your code? (If so, please post a snippet of your CSS here so we can investigate).
- Peter

How do you invoke a simple jsp

hi,
i have a very simple jsp that displays the current time. it works on my tomcat server (installed on my computer). i purchased a domain from yahoo, say, www.beginer.com and uploaded the jsp file to the yahoo server. but when i referenced it with the url www.beginer.com/MyJSP.jsp, a download dialog popped up.
so, how do you get the browser to display the dynamic contents of the jsp file?
thanks.

Did you ask Yahoo whether their server supports servlets and JSPs? Or did you just assume that? I would expect that it doesn't.

How do you invoke an asp page from a java servlet ?

How do you do the above. I am very new in java and needs to do something like this. Please provide code snippets on how to do this. Any help will be highly appreciated.

RequestDispatcher d = getServletContext().getRequestDispatcher("the asp-url")
d.forward(request, response);request and response are the arguments of the servlets doPost or doGet method

How do you invoke the default browser for Unix/OSX

Does anyone know how to programmatically display the contents of a URL in the default browser for a Unix system? I found a javaworld article on doing this using Runtime.getRuntime().exec(cmd). The article gives the cmd string for invoking the default browser in Windows, and for invoking the Netscape browser in Unix.
This can easily be extended to invoke any known browser executable in a known path on a Unix system; but I'd like to invoke the default browser without knowing what or where it is. I'm specifically targetting Mac/OSX, but any Unix solution is worth trying.
Is there a Unix command for launching the default browser to display the contents of a given URL? Or is there an alternative approach, rather than invoking Runtime.exec()?
-Mark

After extensive google searching, I came across a partial solution. This code detects the default browser on a Mac, and provides an elegant solution for trying standard browsers in turn for other Unix systems. I tested it on WIndows XP and Mac OSX 3.9, and it detected the default browser each time. A suped up version of this tool is available as a SourceForge project. You can find it here:
http://sourceforge.net/projects/browserlaunch2/
Here's the simplified code:
// Bare Bones Browser Launch                          //
// Version 1.5                                        //
// December 10, 2005                                  //
// Supports: Mac OS X, GNU/Linux, Unix, Windows XP    //
// Example Usage:                                     //
//     String url = "http://www.centerkey.com/";       //
//     BareBonesBrowserLaunch.openURL(url);            //
// Public Domain Software -- Free to Use as You Like //
import java.lang.reflect.Method;
import javax.swing.JOptionPane;
public class BareBonesBrowserLaunch {
   private static final String errMsg = "Error attempting to launch web browser";
   public static void openURL(String url) {
      String osName = System.getProperty("os.name");
      try {
         if (osName.startsWith("Mac OS")) {
            Class fileMgr = Class.forName("com.apple.eio.FileManager");
            Method openURL = fileMgr.getDeclaredMethod("openURL",
               new Class[] {String.class});
            openURL.invoke(null, new Object[] {url});
         else if (osName.startsWith("Windows"))
            Runtime.getRuntime().exec("rundll32 url.dll,FileProtocolHandler " + url);
         else { //assume Unix or Linux
            String[] browsers = {
               "firefox", "opera", "konqueror", "epiphany", "mozilla", "netscape" };
            String browser = null;
            for (int count = 0; count < browsers.length && browser == null; count++)
               if (Runtime.getRuntime().exec(
                     new String[] {"which", browsers[count]}).waitFor() == 0)
                  browser = browsers[count];
            if (browser == null)
               throw new Exception("Could not find web browser");
            else
               Runtime.getRuntime().exec(new String[] {browser, url});
      catch (Exception e) {
         JOptionPane.showMessageDialog(null, errMsg + ":\n" + e.getLocalizedMessage());
   }

How do you invoke a method with native int array argument?

Hi,
Will someone help me to show me a few codes samples on how to invoke a method which has only one argument, an int [] array.
For exampe:
public void Method1(int [] intArray) {...};
Here is some simple code fragment I used:
Class<?> aClass = Class.forName("Test2");
Class[] argTypes = new Class[] {int[].class};
Method method = aClass.getDeclaredMethod("Method_1", argTypes);
int [] intArray = new int[] {111, 222, 333};
Object [] args = new Object[1];
args[0] = Array.newInstance(int.class, intArray);
method.invoke(aClass, args);I can compile without any error, but when runs, it died in the "invoke" statement with:
Exception in thread "main" java.lang.IllegalArgumentException: object is not an instance of declaring class
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at Test1.invoke_Method_1(Test1.java:262)
     at Test1.start(Test1.java:33)
     at Test1.main(Test1.java:12)
Any help is greatly appreciated!
Jeff

Sorry, my bad. I was able to invoke static methods and instance methods with all data types except native int, short, double and float, not sure the proper ways to declare them.
After many frustrating hours, I posted the message for help, but at that time, my mind was so numb that I created a faulted example because I cut and pasted the static method invocation example to test the instance method passing int array argument.
As your post suggested, "args[0] = intArray;", that works. Thanks!
You know, I did tried passing the argument like that first, but because I was not declaring the type properly, I ended up messing up the actual passing as well as the instantiation step.
I will honestly slap my hand three times.
jml

How do you invoke custom java classes???

Could someone post a detailed method of invoking custom java classes that works including what files go where, settings and the way it is invoked etc.
I have tried various ways from this forum and in the documentation without success. I am using IDM 8. I found these instructions regarding how you would do it if you were writing custom resource adaptors in the deployment tools guide:
To install a resource adapter youve customized:
1. Load the NewResourceAdapter.class file in the Identity Manager installation
directory under
idm/WEB-INF/classes/com/waveset/adapter/sample
(You might have to create this directory.)
2. Copy the .gif file to idm/applet/images.
This .gif file is the image that displays next to the resource name on the List
Resources page, and it should contain an image for your resource that is
18x18 pixels and 72 DPI in size.
3. Add the class to the resource.adapter property in
config/waveset.properties.
4. Stop and restart the application server. (For information about working with
application servers, see Identity Manager Installation.)
I tried the instructions here but placed my custom class in a folder entitled custom instead of /adapter/sample. Not sure about instruction 3 or whether it is relevent. Anyway nothings working.
Edited by: masj78 on Nov 25, 2008 3:50 AM
Edited by: masj78 on Nov 25, 2008 4:03 AM

Hi,
The way to add custom class is the same as you followed , put them in the WEB-INF/classes.
To use the custom adapter ,
Go To Resources - > Configure Types -> Add Custom Resource .
Type in the fully qualified class name of the custom adapter you added.and Save.
Now the new adapter you added should showup in the list of available adapters when you try to
configure a new adapter.
(Make sure that the prototype XML of your custom adapter is correct so that it displays the correct name / type for the adapter in the adapter list.
Thanks,
Balu

How do you invoke an Action prior to an initial page?

Is there a mechanism in JSF that allows action code to run prior to the first page?
Basically I want to do some processing in the context of JSF before displaying the initial application page.
In Struts I was able to do this by defining an action-mappings action that referenced an action class, and from that action I could forward to another action-mappings action that was a JSP.

This seems rather complicated and is not straight-forward. I need something similar: Before the first Render Response phase of a view I'd like my application to process any parameters that were passed via a non-faces GET request and set up my application and the JSF components appropriately. In other words, instead of the initial Restore View -> Render Response I'd like to have the full sequence of Restore View -> Apply Values -> Process Validations -> Update Model Values -> Invoke Application -> Render Response.
For example, depending on the request parameters I'd like to forward the request to one or the other JSF view. And I cannot do that in the Render Response phase because doing it The Faces Way is only possible in the Invoke Application phase - which is not invoked upon a view's initial use.

How do you invoke the wlpackage prompt

I need to create an earfile with this wlpackage. I have the required build.xml created with java.... weblogic.BuildXMLGen, but I do not see any additional command to display the wlpackage
If you have any clue, please let me know.
wlpackage toFile="\physicianEAR\physicianEAR.ear" srcdir="\physicianEAR"destdir="\build\physicianEAR"/><wlpackage toDir="\physicianEAR\explodedphysicianEar" srcdir="\src\physicianEAR"destdir="\build\physicianEAR" />
Joseph

Can someone tell me what is wrong with this ant task
ant <wlpackage toFile="$HOME/apps/MyFirstEarEAR/MyFirstEarEar.ear" srcdir="$HOME/apps/MyFirstEarEar" destdir="$HOME/apps/build/MyFirstEarEAR"/>
<wlpackage toDir="$HOME/apps/MyFirstEar" srcdir="$HOME/apps/MyFirstEar/src/MyFirstEar" destdir="$HOME/build/MyFirstEar" />
~
Here is my errors
woksand:/home/erasdev/apps>vi ant_MyFirstEar.sh
woksand:/home/erasdev/apps>ant_MyFirstEar.sh >> MyFirstEar.log
ant_MyFirstEar.sh: syntax error at line 2: `newline' unexpected
Joseph

How do you prevent Acrobat PDFMaker from rasterizing vector graphics?

I am using the "Create PDF" button (provided by the Acrobat PDFMaker in Acrobat X) to create a PDF from a Microsoft Word 2010 document.
This works fine, except that vector graphics in the Word document appear in the resulting PDF as raster graphics. (That is, when I zoom in, document text outside the graphics appears smooth, but the graphics are blocky; and text inside the graphics that should be retained as text - it's not converted to curves - is just pixels.)
The original artwork for the vector graphics is in CorelDRAW X6 (sorry, Adobe!).
I have exported the following files from the original vector drawing in CorelDRAW:
- EPS (with TIFF preview)
- Windows metafile (.wmf)
- Enhanced metafile (.emf)
I can insert any of these files into Word okay (Insert > Picture), but the resulting PDF always contains a rasterized (bitmapped) version of the vector graphic ("line art").
From memory, this didn't use to happen in my previous working environment (Acrobat 8 Pro with Word 2003, using artwork exported from CorelDRAW 12).
How do you prevent Acrobat X PDFMaker from rasterizing vector graphics? Or is Word 2010 (or CorelDRAW X6) somehow to "blame" here?

Transparency Flattening is being invoked.
From the Create PDF button, select Properties, what is your setting for Default Settings? Select High Quality Print

How can you load local server urls on application start?

Background:
I've been searching for close to two days for an answer to this question, it's full of gotchas and I can't quite get it figured out.
I have an application which contains several web services. These services load up listeners when the services are invoked which makes them available for input. The user has the option of disabling automatic load of these services and invoking them manually by typing in the local url and starting the app. The can allow the autoload which uses a the or allowing the auto load to start. Currently the local url is hardcoded in a property file and this is how the services knows the local endpoint to envoke when it autostarts.
<servlet id="AutoStart_01">
<servlet-name>autoStart</servlet-name>
<servlet-class>com.loadmy.StartupClass.Here</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
This works all fine and well until it's deployed onto a machine that runs a local weblogic cluster that has more than one jvm (and multiple ports) loading the application up.
Problem
The question is, how can you get the applicaton to recoginize the local url for the jvm that is running which can be on different ports? Here's what I've tried
A - Using Inet.Address - This doesn't let you know what port your application is on
B - Using the load servlet on start up ( Only the init() function is called and the request object hasn't been created and the request object is what contains ther protocol, server and port information)
C - Loading a jsp page (READ... purposefully loading a jsp page) on application start. The thought here is that this contains a request object, but unfortunately on this doesn't work in my servlet container (currently tomcat 6 but the application is for a web logic machine)
D - I thought about possibly using System.properties() but no luck there
I'm at witts end on this one and I know there is something that can recoginze the local servlet container and extract the url and port from it.
Any suggestions would be great.
Flabergasted [sic]

Hi,
I had a simmilar requirement once, i also had to display some meaningful message with the busy mode icon, but i guess that comes directly from the WD Framework and is not possible to be changed. Refer the following thread, i raised that time.
Web Dynpro ABAP
Dont have much idea if somethig exists in portal for this.
Regards,
Runal

How do you apply Single Responsibility principle to a repository

I am trying to apply "SOLID" whenever I can and try to use common sense and avoid a pattern when I see that a pattern is creating more problems than it's trying to solve. I don't want to apply a pattern and make life difficult for somebody else using
my code just for the sake "I write patterns" if you see what I mean.
Now I am struggling with one of the principles that I thought was the easiest to grasp: "SRP".
How do you practically apply this principle to repositories?
Let's suppose I have a
IEmployeeRepository
IUserRepository
IProductRepository
and commonly they will have methods like these:
public interface IUserRepository
User GetUser(int id);
IEnumerable<User> GetAllUser();
void DeleteUser(int id);
same for employees and products.
Are we saying that each of these method should be a class on it's own? even though at times we are talking a single line of code?

Hello,
"Are we saying that each of these method should be a class on it's own? even though at times we are talking a single line of code?"
interface is not a method. It has its own definition and you can refer to here:
http://msdn.microsoft.com/en-us/library/87d83y5b.aspx
Any from your question I think you may still confused about the usage of interface. In this way, I will recommend you have a look at the following blog:
http://www.codeproject.com/Articles/18743/Interfaces-in-C-For-Beginners
"Interfaces in C # provide a way to achieve runtime polymorphism. Using interfaces we can invoke functions from different classes through the same Interface reference, whereas using virtual functions we can invoke functions from different classes in
the same inheritance hierarchy through the same reference"
With the blog you can check that code to see details about how to use interface.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I invoke an ActionListener on a page when the page initially loads?

How do I invoke an ActionListener on a page when the page initially loads?
Page 1: A user clicks on a h:commandButton and is navigated to Page 2.
Page 2: When the page loads and goes through RESTORE_VIEW, APPLY_REQUESTS and RENDER_RESPONSE, I need to call an ActionListener in the managed bean for Page 2.
However, if the user comes in from any other page than Page 1, the ActionListener cannot be invoked intially when the page loads. The user has a choice to click on the h:commandButton on Page2 to invoke the ActionListener.
What is an example of invoking a method with the ActionListener signature in Java code?
Where would I put the code to invoke the ActionListener, in a beforePhase or afterPhase, constructor?
Thanks,
--Todd

Interesting. You're right. It doesn't happen when I click away from this site and then return. Maybe I'm barking up the wrong tree. Maybe it's the specific website I was thinking of and not Firefox. Unfortunately, I have to use that site all the time for work. I'll try contacting their webmaster. Thanks for your help.

How do you play mine craft on a mac with 2 screens fullscreen

how do you play mine craft on a mac with 2 screens fullscreen i play mine craft and i have a mac pro with 2 screens and i want to know how to play mine craft with both screens

Up until Mavericks, the default setup for multiple displays was "Extended desktop". This picture show how it works far better than any words I could post here:
The blue boxes are Icons for your displays, whose sizes are proportional to the number of pixels. Drag the boxes so that they accurately represent the placement of the displays on your bench (left, right, up, down). Then the mouse moves freely across the boundary between displays, and you can drag a window with it. You can also stretch a window so that it covers most of both screens.
The small white header is an Icon for the MenuBar, which is also moveable.
for Mavericks and later, a different scheme "Displays have separate spaces" becomes the default, but can be annulled by this setting in Mission Control:
"Full Screen" is a concept ported from iOS, the land of tiny screens and one-at-a-time processing for the iPhone. If you have multiple screens, invoking "Full Screen" will make most of the screens stop working entirely, which your main window expands into the MenuBar area. Do not use "Full Screen" on a Mac with multiple screens.

How do you invoke screengrab

Similar Messages

Maybe you are looking for