How do you open Premiere Pro 2 projects on Premiere Pro 3?

Is there a way to do that?

You can always try creating a new project in CS3 and then importing (File > Import) the 2.0 project. That should clean up any mis-match in the project header info.

Similar Messages

  • How do you open a duplicate iMovie project?

    How do you open a duplicate iMovie '11 project? I tried opening it and it didn't work. The file says .rcproject. All of the iMovie events are still there.

    The first thing to check is whether he has moved the files out of the Movies/iMovie Projects folder. If they are not there, imovie will not see them.
    If iMovie does not see several projects, it could be a preferences issue.
    For how to trash preferences see this post.
    https://discussions.apple.com/docs/DOC-4061
    It is also possible for a project to get corrupted. In this case, I would trash preferences and restore the project from Time Machine as you suggested.

  • How Do I Open a Motion (5) Project in Final Cut Pro X?

    How Do I Open a Motion (5) Project in Final Cut Pro X?

    You can't directly. You can either export a file, or you can save it as a template, effect, title, transition, or generator, that can be used in FCP.

  • HT5103 How can I open Final Cut Express project in Final Cut Pro X?

    How can I open Final Cut Express project in Final Cut Pro X?

    If you export the project from FCE you can import the QuickTime into FCP. You can do limited work to it like adding titles.

  • How do you get Premiere Pro CS4 frames into Photoshop

    Hi I am trying to modify a series of Premiere Pro Frames by coloring a small section of them in Photoshop 7. How do I pull those frames out of my timeline, get them into Photoshop, and then back into my timeline? I remember doing it with Premiere 6.5, but I can't figure out how to do it with CS4.

    Thanks guys, I'll take it from there.
    Terry Lee Martin
    Date: Wed, 2 Sep 2009 17:15:26 -0600
    From: [email protected]
    To: [email protected]
    Subject: How do you get Premiere Pro CS4 frames into Photoshop
    Yes, PS-Extended will make things a bit easier. While not perfect, it simplifies rotoscoping quite a bit.
    Good luck,
    Hunt
    >

  • Final cut X-- how do you open previous projects?

    i must be missing something really basic. How do you open previous projects in Final Cut X? When I try to open one it hangs on "loading (nameofproject) into time line.

    You need to provide more information. Are you seeing it within the FCP interface properly when you go to show the Project Library?  If so, I would click on it to select it and then open the Inspection window and click on Modify Event References and select proceed from there. I'm assuming you have not moved the project from it's proper folder....

  • Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

    Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

    Hi Winterwilly,
    Welcome to Apple Support Communities. 
    The article linked below answers your question of how to use QuickTime to record something on your MacBook Pro’s screen.
    QuickTime Player 10.x: Record your computer’s screen
    Cheers,
    -Jason

  • How do you open a project started in Muse, Dreamweaver, or other to tweak for different screen sizes

    How do you open a project started in Muse, Dreamweaver, or other design program to tweak for different screen sizes?

    Hi. As of now HTML import is not plan of record for Reflow 1.0.  See this FAQ for a bit more info - http://forums.adobe.com/message/5071510#5071510.
    -C

  • How can you download premier pro when the icon doesn't exist in cloud?[was:pr]

    how can you download premier pro when the iucon doesent exist in cloud???

    In order to download the software, your computer must meet the system requirements to run the software.
    http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-premiere-pro.htmlhttp://www.adobe.com/products/premiere/tech-specs.html
    The usual reason for not being able to download is that Premiere Pro (and other video apps such as After Effects) are 64 bit only so they require a 64 bit computer and a 64 bit operating system.
    If you're running a 32 bit computer and operating system then you will not see the Premiere Pro icon since the software will not run on your computer.

  • How do you new Mac Pro owners like your machine with Logic?

    Don't mean to be a PITA but I need to get this right before I drop three to five grand on a new set of music tools. I'm trying to decide between Mac Pro and iMac for use with Logic. Seems there are a lot of posts regarding glitches with the new Mac Pro and Logic, whereas the posts from people with older G4s and G5s seem to indicate they are running rock solid. So you new Mac Pro folks or anyone else, please weigh in. Is the new Mac Pro "glitch heavy" or is it just a matter of tweaking the system to where it runs smooth? In general, how do you new Mac Pro folks like the way it works with Logic?

    I'm mostly pleased with my MacPro 2.66. Almost no crashes with Logic, although I experience a few more bugs here and there than with my G4. Occasional CoreAudio errors, I have to restart CoreAudio if my external word clock is set to the wrong sample rate when I open a session, there seems to be a bug between high fader levels (above +4dB) and panning... little things like that.
    Then again, compared to my G4, the FireWire bus is screaming fast--with most sessions, I can run a buffer of 128 samples at 96k with my MOTU 828mkII, while my G4 would sometimes glitch at 96k with 512 samples. At 96k, 256 samples, my MacPro/828mkII rig is rock-solid... I informally tested it by recording 12 test tracks simultaneously for 20 minutes, with the CPU nearly maxed out (which was difficult to do--took a bunch of Space Designers and Ultrabeats)--absolutely zero clicks or pops.
    And of course, WAY more processing power than my G4.
    I'm assuming that MacPro compatibility is a fairly high priority for Apple these days, so hopefully the bugs will get worked out soon. And as things are, Logic is definitely usable on a MacPro--the bugs I encounter rarely slow down my work.
    So, far from perfect, but as far as new technology goes, I'd say Logic on the MacPro is above average.
    Good luck!
    James
    [email protected]

  • How do you open the trash can in iMovie 4.0?

    2-17-07
    How do you open the trash can in iMovie 4 to retrieve files?
    thanks,
    gil

    Gil:
    Read this from imovie Guru, Karl Petersen:
    "All may not be lost. A couple of things to keep in mind:
    A. Don't forget that iMovie uses non-destructive editing, so the source file of a clip is never shortened. (The source file for each clip is stored in the Media folder of the project. Each scene imported from the camera arrives with its own Media file. Source files can support one clip or many.)
    If you split Clip A into two clips, then discard one of the clips and empty the trash, the original Media file is NOT discarded. The Media file itself is discarded ONLY if you discard the last clip that uses that source file. (In the past, iMovie would remove a portion of the Media file, shortening the file. iMovie HD NEVER shortens a Media file.)
    So the lost video may still be there, just not be represented by a clip. To retrieve the video of a split clip, select the clip and choose Advanced > Restore Clip to Original. That returns it to its original length. (Or better still, Option-drag the clip to some other place on the timeline to make a copy of it, then Restore the copy.)
    Emptying the trash does two things: 1) discards the CLIPS we've trashed -- clips perhaps created by splitting Clip A, and 2) sometimes it discards the source files for those clips. But #2 occurs only when no other project clip references that Media file. So long as any clip in the project relies on a Media file the file is not discarded. That means any clip that uses that source file can be restored to the file's original length and content.
    So the stuff you lost may be gone. Or not.
    B. A backup copy of the project file exists inside the project package. It is a copy of the project file as it was BEFORE you last saved. If you've saved the project just once, it may help.
    I suggest making a copy of the project and working on the copy. To make a copy, select the project in the Finder and choose Edit > Copy "your file name goes here".
    To look inside the package, Control-click on the project icon and choose "Show Package Contents" from the popUp menu. You'll see several project files inside the package, one with a tilde (~) in its name. That's the backup. Double-click on it to open the project. The discarded clips may appear, or they may be gone. (This will NOT recover any Media files that have been discarded.)
    If the backup project looks usable, quit iMovie without saving, move the current project file outside the package, change the name of the backup project file to match the current project file, open the project and save.
    Karl"
    Sue

  • How do you open purchased apps (synced) on your mac?

    I have an iphone 4 and I sync it with my macbook. I Have heard that you can share apps with another computer os smartphone user.  How do I use these apps on y macbook pro? I have authorized the computer... But how do you open the app? when I go to applications, I can only find the apps in itunes.. how do you open the app in itunes.... right clicking doesnt do anything..... it must be pretty simple... please tell me. thanks

    Apps designed to run on an iPhone can't run on a Mac (and vice versa) - the programming required is totally different.

  • How do you open cds drives

    I just got back from the apple store and I was wondering How do you open the cd drives on a mac pro. I forgot to ask the guys there. I saw no buttons and I was pushing on them and it did not do any thing.

    I just got back from the apple store and I was
    wondering How do you open the cd drives on a mac pro.
    I forgot to ask the guys there. I saw no buttons and
    I was pushing on them and it did not do any thing.
    The Eject button on the keyboard. It's the upper right-most key. The key has a triangle with a line below it.

  • How do you open a finalized imovie file?

    How do you open a finalized imovie file?

    Correct. But I figured it out. I moved the file to my desktop after I finalized the project and it wouldn't open in imovie or QT. I moved the file back to the folder it saved to and I was able to open it in my Project folder. Whew. THX for responding

  • How do you open the DVD tray on a K430 without using Windows Explorer?

    How do you open the DVD tray on a K430 without using Windows Explorer? I can't find a button on or below the door.  Am I missing something?  Additionally, will the K430 boot from a DVD/CD if it finds one in the DVD tray instead of the hard disk?  Please help. Thanks. 
    Solved!
    Go to Solution.

    hi penguin247,
    Regarding your questions:
    1. Can you try to press the eject symbol on the DVD bay and observe if the DVD tray comes out.
    Link to picture
    2. By default, the HDD is set as the first boot device and the ODD second on the K430. You will need to change the boot order or continuously tap F12 during POST to boot from the ODD (assuming you have a bootable media inserted).
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for