How do you 'overlay' one graph onto another in Numbers?

I'm working on a survey and I want to show that the composition of my sample is representative of national trends in terms of gender, occupation, religious affiliation, etc. And I want to represent this graphically by, e.g., displaying the proportion of males and females in the UK population in a bar chart (49% and 51%), and then overlaying onto that the proportion of males and females in my survey (which is more like 40% and 60%), so that the two sets of figures are on top of one another and the reader can judge from that how representative my group is.
How do I do that in Numbers?

The problem with just dragging one on top of the other is that they still act as 2 different graphs. It's also difficult to make the one underneath visible.
A stacked column graph doesn't work either because that puts one column on top of the other. I want them laying on top of one another so that it's easier to compare their relative size. The best near solution I've found so far is to simply use a standard column graph, but with two series (one with the population data, one with my sample data). That puts the two columns for each category (male and female) side-by-side so you can compare easily, but it's not quite what I want.
I want something more like this:
http://i.stack.imgur.com/0YGFD.png
It doesn't have to look exactly like that but hopefully you can see what I mean.

Similar Messages

  • How do I copy one image onto another image?

    How do I copy one image onto another image?

    Lots of ways;  Use the Place command to place a file in another.  Open two files and drag one to the other's window tab, drag an image from bridge onto an open file.  Open an image, press ctrl/cmd-A to select all, the ctrl/com-C to copy the image, the ctrl/cmd-V to paste it into another image.

  • Overlay a graph onto another one without losing any cursor

    I have 2 graphs that have differennt Y scales (but X scale is the same). Both graphs have cursors on it. I would like to overlay the first graph onto another (not using the same scale on the 2 graphs)so that the resulting graph looks just like the oscilloscope display and I don't want to lose those cursors. I can not use the picture plots because it's very hard to over a cursor on a specific spot on the graph(because I have to know the exact point on the picture to overlay a cursor) How do I?

    If you want to control cursors from both graphs with the mouse, you are out of luck. I have overlaid waveform graphs with different Y scales many times. The problem is that the top graph has transparent parts to it so that the bottom graph shows through. This makes one graph look like two. Because one graph is on top of the other, the user cannot click on the display for the bottom graph. This prevents the bottom graph from having a cursor that can be moved with the mouse.
    There are a few workarounds.
    1. You can programaticly move the cursor with property nodes. This way you have a slider control located off the graph that can be moved by the user that in turn moves the cursor on the bottom graph.
    2. Put two cursors on the top graph. You will not
    be able to have the nice snap to point but the information from one of the cursors can be used to indicate values on the bottom graph. The code will be a little tricky but this most closely simulates both graphs having a cursor. The key will be using property nodes to calculate the visible range of the plots and the relative postion of the cursor to the edge. For instance, a cursor that is 10% from the right on the top graph is 10% from the right on the bottom graph, and its value can be caluculated.

  • How do you replace one image with another

    I have a page that displays the results of a search for information about a club. One of the items is the club's logo. It is displayed using the following code
    <img src="<?php echo $row_clubedit['club_logo_url']; ?>" alt="The Club's Logo"  class="logo" title="The Club's Logo">
    This works fine, except when no club has been selected, in which case it shows the default question mark in a blue box.
    It would be nice if I could display the Federation Logo, to which all the clubs belong, until a club is picked.
    Is there a simple way to set a default image that would be replaced from a data set.
    $row_clubedit['club_logo_url'] holds the url to the log in the format http://www.club.org/clublogo.png
    <img src="<?php echo ( 'federation_logo_url'); ?>" alt="The Club's Logo"  class="logo" title="The Club'c Logo">
    The logic I suppose would be
    if club_logo_url does not exist,
              then print the  federation logo,
         else print the club logo.
    How do you code that in php?
    I'm only a beginner at PHP.

    <img src="<?php echo $row_clubedit['club_logo_url'] == "" ? "http://www.club.org/clublogo.png" : $row_clubedit['club_logo_url']; ?>" alt="The Club's Logo"  class="logo" title="The Club's Logo">
    should do it

  • How do you copy one page into another pages 5.2 doc

    Working in version 5.2 and want to add (copy) one page from one pages document into another pages document. (both documents are made w 5.2)
    Thanks!

    You could copy and paste pages from one document to another in Pages '09, but Apple removed this from Pages 5.
    Best you can do is copy the content.
    Peter

  • How do you display a graph on another machine using vi server?

    I have to machines one server and one client. So far I have set things up so that the client can read and control all the controls on the server machine "test.vi". Everything there is working fine. However, when I use the Vi method "get all control values" only the controls on that test.vi are listed and not the graph or any other indicators. I would like to be able to push a button on the client machine to display the data being displayed on the server machine. Is this possible? If so how? There doesn't appear to be any vi methods titled "get all indicator values".
    I have included vis to help show my problem.
    Thanks in advance for your help.
    Greg
    Attachments:
    Master_3.vi ‏191 KB
    slave.vi ‏32 KB

    Greg,
    At least since LabVIEW 6.0, the method "Get all Control Values" has a second property called 'Controls' that takes a boolean input. If left unwired or set to true, you get the Contol values. If you set it to False, you get all the indicator values.
    Ed
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

  • OIM: How do you have one task trigger another

    When there is no response code...
    For example, we're all familiar with the common Copy Data adapter we use to copy the input to the output. Very simple adapter, but there is no Response it gives that I can use to trigger another task.
    Specifically, I want to time stamp whenever a user changes his/her password by updating a UDF. The task works fine when manually launched, but I want it to trigger based on the Change User Password task... which has no response codes.
    I know I could do it on the Password Updated task, but I want to note even if the task fails (there are other RO's whose password change will succeed), and I don't want to attach the task to both the C and R in case of failure.
    Is this possible?

    You could change your code that does the "Change" to use APIs instead of just passing it to the form. Create an adapter that has like Resource Name, User Key, and Form Field Name, and using the APIs, find the user's active instance, and update that field with the setProcessFormData instead, and then you get both a response code, and you have triggered the field to be updated.
    -Kevin

  • How do I burn one cd onto another

    Hi
    We have just just bought an iMac so it is a steap learning curve. Yesterday I tried to burn a CD from a CD. Normally a very easy process. I used the utility program in help and burnt a image but when I tried to burn it to another CD it kept saying the there was not enough space on the cd. There was plenty of space on the cd so I am not sure why it was doing it.
    Is there some easy cd buring software for Macs? I have to burn lectures for correspondence students every week so it is important to have straight forward easy software. Have done a search of the bulliten boards but there have not been any straight forward answers.
    Cheers DSB

    try simplyburns:
    http://simplyburns.berlios.de/index.php
    it seemed rather straightforward to me.
    or burn:
    http://burn-osx.sourceforge.net/
    Message was edited by: matty dread

  • How do you use one managed session bean from another?

    Hello -
    I am a complete newbie to JSF coming from Struts 1. My question is how do you use one managed bean from the method of another one? I think this would be a common senario. For example I put a bean in session scope when a user logs in and in a different method within a different bean I want to get some of this user's information. What is the correct way to retireve one bean from a method in another with session scope?
    Also what would the code look like to retieve another bean from the method of a managed bean where the bean you want to retrieve has application scope?
    Thank you in advance.

    Sinplicity wrote:
    Could you be a bit more specific? If a bean is configured in the faces config file then all of it's properties are managed, correct?Not necessarily.
    What would the code look like to retireve the bean?You don't retrieve it, it has been injected.
    Can I retrieve the whole bean or just a property of the bean. I would be really interested in seeing how this is done in code? And would really love a bit more information on what it means to be a managed property?Time to consult a JSF tutorial.

  • How do you hyperlink one Pages document to another Pages document?

    How do you hyperlink one Pages document to another Pages document?

    Feature removed from Pages 5, along with over 90 others, by Apple.
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Pages '09 should still be in your Applications/iWork folder.
    Archive/trash Pages 5, after Exporting your files to Pages '09, and rate/review it in the App Store, then get back to work.
    Peter

  • My slide presentation (with sound) is done. How can I change one song from another?

    My slide presentation (with songs) is done. How can I change one song from another?

    Do you still have your Aperture Slideshow project? Then open the slideshow and select the one of the green audio file clips in the film strip that you want to replace. Press the "delete" key and drag another audio file from the Media Browser directly onto the slide, where the sound should start.

  • How do I swap one clip for another in Final Cut Pro 7?

    How do I sway one clip for another in Final Cut Pro 7? I am doing what it says in a book but it is not working. Thanks.

    You drag the clip from the browser to the clip on the timeline. Wait till the timeline clip goes white. Drop it and pick from the menu that appears the replace option you want.

  • Dragging One Image Onto Another

    The book, Photoshop Layers, by Kloskowski, starts the subject of Masks on p. 94 by telling the reader to open two images, then use the Move tool to drag one onto the other so that they are in the same document.
    A picture of what that should look like shows, in the Layers palette, image A in the Background layer, and image B residing in Layer 1. Each thumbnail shows an entire image (not a checkered thumbnail with a small image within it).
    As the title indicates, the book is designed for Photoshop users. I use Elements 6 but have been able to perform most of the tutorials; however, the above instructions baffle me. I cannot fathom what he is talking about.
    In Elements 6, How can I drag one image onto the other? I start out with two images in the bin - and the move tool does not work on bin images. I have tried various workarounds but the results do not look like the Layers palette picture he shows. For instance: File/New/Blank File does not work.
    As to my level of knowledge: I am very comfortable with layers of all sorts and understand/use them. I am also familiar with Elements. So, if you will, assume I am not a neophyte, even though my question may seem very basic.

    Normally this won't matter, but there are situations where it does change what you bring in; like rasterizing an EPS file, for instance. In full PS, it creates smart objects from the files you use the command on.
    A text layer, for example, is no longer editable after being placed. But for most images, I suppose it would be okay.

  • How to integration between one model to another model

    hi friends
    can any one explain me
    how to integration between one model to another model 
    ex:- i have sales model 1 and  i have anther model finance model how to changes  in figures in sales model as well same change are happen in finance model how it possibly please explain me friends   
    and how many ways i can do this ?
    Thank you
    suresh m

    Hi Suresh,
    If you do changes in Finance and want to send data in Sales , you can use LOOKUP /DESTIANTION_APP -script logic or ABAP logic.
    To have seamless flow, you need to take care of security.
    Explain your requirement in  more detail .
    May be helpful .
    Shrikant

  • How do you insert a picture into another picture?

    How do you insert a picture into another picture.  For example, one person is missing from family photo & I'd like to insert that person's face.

    By using an external editor:
    In order of price here are some suggestions:
    Seashore (free)
    The Gimp (free)
    Graphic Coverter ($45 approx)
    Acorn ($50 approx)
    Pixelmator ($50 approx)
    Photoshop Elements ($75 approx)
    There are many, many other options. Search on MacUpdate. You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

Maybe you are looking for