How do you position a window on the screen?

When I run a application how do I make the window open in the middle of the screen instead of the top left?

Ah, a JFrame, then try this;-
   Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
   Dimension frameSize = frame.getSize();
      if (frameSize.height > screenSize.height) {
         frameSize.height = screenSize.height;
      if (frameSize.width > screenSize.width) {
         frameSize.width = screenSize.width;
frame.setLocation((screenSize.width - frameSize.width)/2,(screenSize.height - frameSize.height)/2);
frame.setVisible(true);

Similar Messages

In idvd i do not see a window but hear the audio, how do I get a window on the screen?

In IDVD id do not see a window but hear the audio for a new project. How do I get a window on the screen?

You need first to import a movie of your own, fill drop zones with your pictures, etc. The audio you are hearing is just the built in preset. Take a look at: http://www.apple.com/findouthow/movies/idvd.html

HT1430 How can you reboot your Touch if the screen is frozen and will not allow you to use the "slide to power off"

How can I reboot my Touch when the screen is frozen and I cannot use the "slide to power off" feature?

Next try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How do you center a popup on the screen?

My popups show on the bottom right of the screen. How do you center all contents of a popup on the screen?

Hi,
Did you try
myapp.BrowseClientSiteDocuments.ShowFilterPopup_Tap_execute = function (screen) {
// NOTE: If using JQuery Mobile 1.3 (or higher) use "popupcreate" rather than "popupbeforeposition"
$(window).one("popupcreate", function (e) {
$(e.target).popup({
positionTo: "window"
$(window).one("popupbeforeposition", function (e) {
e.target._mslsCustomPosition = undefined;
screen.showPopup("FilterPopup");
Sven Elm

How do you play YouTube audio with the screen off with iPod 5th gen?

I used to own a 2nd gen iPod touch, which ran on an ios 4.2.1 system, that allowed me to play YouTube with the screen off. Ever since I got iPod 5 which came with ios 7, let's say I am kinda still getting the hang of how everything works. I still would like to play YouTube while the screen is off, but seem to not know how. Does anyone know how to solve this problem? It's running on ios 8, so if you could help me with this, I would gladly appreciate it!

Hi there, you can download itube, it's in the app store, and that allows you to save youtube videos for offline play. Also, you can play youtube audio with the screen off, even without a third party app. Click on a video. When it's playing, press the lock button. Press it again, to wake the device up. You should see your video on the front of the display, with a play button. Click it, and it will start playing even if the device is off. Hope I helped, ~Samuel.

What do you do or how can you resest your ipod if the screen is white and it say go to ipod support

what can you do to reset your ipod if the screen is white and says go to ipod support

Try connecting it to the computer and restore in iTunes. Or that is what you were trying?

How can you left click anywhere on the screen automatically using applescript

Im trying to create a script that automatically opens up an application and then click on the buttons inside of the application (Note that the buttons that the application uses are not considered buttons by applescript's standards). What I tried so far is this:
tell application "System Events"
click at {724, 490}
end tell
The faults that I can see so far is that I didn't specify whether I wanted to do a left or right click. Please help

Adobe CSS 4, Windows. The file is a PDF file. Please see below ... Thanks for your help !

How do you remove air bubbles inside the screen?

A little bubble appeared on my screen, whats the reason this happend? how to remove this then?

Have you ever had a rock hit the windshield of your car and leave a little nick in it (not a crack, just a little divot where a tiny piece of the glass has chipped away? That's what I mean by a chip. A nick. A piece of the glass that has been broken from the surface of the display.
As has already been stated, if it was a manufacturing defect, it would have been there since day 1. Since you said it appeared later, that means the glass came in contact with something hard enough to take a piece out of it.

In Pages on Ipad, how do you enter a Tab using the screen keypad?

Hi,
I have an iPad2 and am using Pages, Notes and a few other apps. Pages has and supports tabs in the document, but I have yet to find a TAB key in the on-screen keypad? It works fine off the bluetooth keyboard, but I have access to that only about 20% of the time.
Thanks for your help.
...Doug

http://www.gordonmeyer.com/2010/04/how-to-enter-a-tab-or-page-break-in-pages-on- ipad.html

In print preview - how can you have multipage previews of the document - 1 - 2 - 3- 6 - 12 page preview and so on so that you can see if the document is ok to print?

WINXP - In Explorer you can have multi-page print previews from 1, 2, 3, 6 upwards to check and confirm that the document will print correctly to your needs - and does this across the screen format as opposed to down the page, so that you can see all 12 pages on your screen to quickly see that the print percentage is correct and all pages fall into the print area and so on - how can you set this up with Firefox, because printing with Firefox is so unstable, you don't know what to expect when printing a document or web page?

No what I mean is how can you see many pages across the screen without having to scroll like in explorer where you can see 12 or more small pages on your screen without scrolling down, like tiled across your screen as opposed to vertical down the page. Thanks

Multiple windows on the screen

How does one open multiple windows on the screen?

Is Word set to Full Screen Mode?
If so, Grab won't work. Take Word out of Full Screen or use the shortcut keys:
cmd-shift-3 to copy full screen
Cmd-shift-4 to make a selection, or press spacebar to choose a window.
Add ctrl to each to copy to clipboard.

How do you make adobe X open the "combine pdf" window in the foreground?

This may not be the correct forum for this question, but considering that I simply
have not been able to get a reply in any other Adobe forum, I decided
to just post this question to ALL Adobe forums until I get a response.........
How do you make adobe X open the "combine pdf" window in the foreground?
I am using a "Windows 7" computer at work with "Acrobat X Pro" and I'm constantly combining
pdf's and tiff's in Acrobat.
It would be nice if when I select 30 or 40 files to combine, the *******
"Combine Supported Files in Adobe Acrobat" window would open in the
foreground, not behind the 10 or so windows already open.
I have been researching this for some time now with no solution.
If the answer is that "IT CAN'T BE DONE", then that's fine. At least
I will have an answer and can stop searching. If (as I suspect) it can
be done, then kindly supply me with "step by step" instructions.
Michael Jones

Hi ,
I guess that was a bug in that version .
It does not happen in Acrobat XI and Acrobat DC .The window comes right in front of everything else .
I wonder that was a bug and that was fixed the other versions.
You could upgrade to the latest Acrobat version ,i.e Acrobat DC and you would not experience this anymore .
Regards
Sukrit Dhingra

HT1343 how do I switch between windows in the same programme? I know that I can use Command tab, however this takes you through all of the programmes that I'm using. What I need to do is have a shortcut to switch between windows in the same programme.

how do I switch between windows in the same programme? I know that I can use Command tab, however this takes you through all of the programmes that I'm using. What I need to do is have a shortcut to switch between windows in the same programme. For example if I'm in Excel and have 5 windows open I want to be able to scroll between each window of Excel only with a shortcut.
Please help!

Command and ~ keys to tab between open windows.
Technically it is the Grave Accent ` (aka reverse quote) under the tilda ~ key. Tilda ~ is shifted, and Grave Accent ` is not.
Command-Grave Accent

How do you change image size in the title window?

I just changed operating systems to Windows 7, which meant that I had to re install Premiere Pro CS4. I am now working on a 64 bit system. Might not make any difference, but thought I would give you the specifics just in case. When I pull up the title window to add a title to my clip, the image is about the size of a postage stamp. How do I increase the size of the image in that window?

Thank you again for responding Hunt. I did find out what what was happening.
I had to reinstall the program on my computer. I just upgraded to Windows 7, and I now have a 64 bit system. When I booted up PPCS4, I assumed that my settings would be the same as they were before when I had Vista installed and didn't bother to check them when I started a new project. Well, they were not. I also added a TV tuner card to my computer. I now can watch HD TV on my computer. I suppose that it is possible that somehow PPCS4 noticed that, and set my default settings to HD, rather than NTSC DV. I just merrily went along clicking the OK button and started editing. When I start a new project now, I select NTSC DV and the Title window works just fine, and exactly the way I expect it to.
I just received Jeff Bellune's book Adobe Encore DVD 2.0 in the mail and will be totally immersed in Encore studies today. With all of his children, I don't see how he had time to write it, but I'm glad that he did. I also ordered a book entitled Designing Menus with Encore DVD. I know that it was written for an earlier version than CS4, but I will trust what you said about that. Many things are the same with some minor variations due to upgrades in the program. The basic ideas don't change, but how you accomplish them can, and usually do over time.
Terry Lee Martin
Date: Mon, 17 Aug 2009 16:04:16 -0600
From: [email protected]
To: [email protected]
Subject: how do you change image size in the title window?
Welcome to the forum.
That is an odd one. The Title should be the same Frame Size as your Project/Sequence. What is it's Frame Size? Also, are you perhaps doing a Title based on an older Template, that was done for a different Frame Size?
What happens if you choose Title>New Title>Default Still?
Good luck,
Hunt
>

How do I position a window dynamically?

I want my customized "Get Serial Number" vi to be in one of two positions on the screen. How can I get the system screen metrics so I can determine the (top,left) coordinates of the vi window, and set the position of the window within the vi?
Thanks,
Mike
Solved!
Go to Solution.

If you are using a PC, the screen size can be found using the .NET Property Node under Systems.Windows.Forms.SystemInformation.PrimaryMonitorSize
You can move the vi front panel using a property node with a reference to 'This VI'. I have enclosed a not-too-elegant yet functional example. Hope this helps.
-Darin
Message Edited by Darin.K on 07-16-2009 06:55 PM
Attachments:
MoveMe.vi ‏15 KB

How do you position a window on the screen?

Similar Messages

Maybe you are looking for