How do you set up SSHv2 on stacked 3750x

I am having a bit of a problem getting SSHv2 to work on stacked 3750x switches. Here's the story. I replaced one 6506-E with a pair of stacked 3750x, and I basically just copied the configuration from the 6506-E to the 3750x. While copying:
ip ssh time-out 60
ip authentication-retries 2
ip ssh logging events
ip ssh version 2
no ip domain-lookup
ip domain-name trdm
login block-for 300 attempts 3 within 60
login on-failure log
login on-success log
to the new switch, I was informed that I had to generate rsa keys in order to enable ssh. So after the entire configuration was copied, I went back and ran
cry key gen rsa
and I chose 1024 bit modulus. It successfully created it, and I was able to verify that SSHv2 was enabled by issuing
sh ip ssh
which returned
SSHv Enabled - version 2.0
Authentication timeout: 60 secs; Authentication retries: 2
Now when I issue
sh cry key mypubkey rsa
I get
Key name: hostname
Storage Device: not specified
Usage: General Purpose Key
Key is not exportable.
Key Data:
<omitted>
Key name: hostname.server
Temporary key
Usage: Encryption Key
Key is not exportable.
Key Data:
<omitted>
The config for my vty lines are:
lin con 0
exec-timeout 4 30
timeout login response 300
login
lin vty 0 4
access-class 101 in
exec-timeout 4 30
password 7 <omitted>
login local
transport input ssh
lin vty 5 15
access-class 101 in
exec-timeout 4 30
password 7 <omitted>
login local
transport input telnet ssh
The ACL is
access-list 101 permit tcp host <omitted> any eq 22
access-list 101 permit tcp host <omitted> any eq 22
access-list 101 permit tcp host <omitted> any eq 22
However, if I use telnet, it works without issue. Anyone have any suggestions?

Okay, I have solved my problem on my own, but part of it could have been attributed to the ACL, so I'll award points for that. Essentially what it boils down to is:
1. I didn't have a username and password set up on the switch.
2. I was using an extended ACL on the vty lines.
Once I added the username and password in the global configuration and implemented the standard ACL on the vty lines, it worked without issue. Just one more lesson learned the hard way.

Similar Messages

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

How do you set up Port Forwarding for ARD 2.2 in AEB N?

Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
Jim

Try the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How do you set up multiple accounts in itunes so phones don't automatically sync each others data ?

How do you set up multiple itunes accounts to prevent multiple phones from sharing contact data?

To add to Rod's answer, I have been blogging to explain more in detail the work flows for Question and Score slides, and some tweaking possibilities in these articles:
http://lilybiri.posterous.com/question-question-slides-in-captivate
http://lilybiri.posterous.com/question-question-slides-part-2
Lilybiri

How do you Set up a Family Pack sub-account

how do you Set up a Family Pack sub-account i have purchased a Family Pack account and enter the activation key and i can not find where to set up the sub-account.
please help
Denis

Thanks Shepart
when i activated the account i ticked the upgrade button, should i have ticked the new account button?
anyway, when i do what you say (below) there is not a manage "Accounts button" so i went to reactive it again ( for a new account) and is says that the activation key is all ready in use.
Denis, go to www.mac.com and sign into your account. Click on the word "Account" at the top of the left hand column. You will need to sign in again for security purposes. Once your account settings show up, click on the "Manage Accounts" button and you can take care of everything.
i think i hit a brick wall !!
Cheers
Denis

How do you set up separate facetime accounts under one apple id

how do you set up separate facetime accounts under one apple id

This is possible, but I haven't found any official Apple topics about it, so I will share a nice web article about it on a Mac fan website:
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
Hope this helped!

How do you set up iphone 5? everytime i put it into the computer it erases all my contacts how do i stop this and get my contacts back?

how do you set up a iphone 5 everytime i conect it to the computer it erases all my contacts how do i put them back on my phone and stop the computer erasing them again?

Are your contacts not on your computer?

How do you set up two different ipads on one computer ?

I purchased a new ipad for my wife and want to get her started but we both use one imac as our desktop system. How do you set up two different uses on one computer.
Thanks,
Dave

Other options not covered in the article:
1) You can plug both in under the same computer username and same iTunes Apple ID and give each device it's own name. You should be able to manage them as separate devices with different media, apps and screen layouts. All of your media would be in a common pool, though.
2) Under one computer username, you can login and logout of two different iTunes Apple IDs. This option is cleaner with two computer usernames but it can be done with one.

How do you set NLS_LANG environment variable in report builder

How do you set up the reports builder environment to display foreign fonts.
So far what I read makes me think that in report builder I have to set the NLS_LANG environment variable .
If anyone has done this is that true and if so how.
Also the languages I want to use are the following.
Armenian
Cambodian
Chinese
Russian
Tagalog
Vietnamese
How do I find the NLS_LANG environment variables for these.
Where I am at now+
I have to set the DEVELOPER NLS LANG. I see the NLS LANG in the registry and I guess I have to add the DEVELOPER NLS LANG.
Now I am searching for syntax. If anyone knows the syntax for those languages please let me know and how do I set more than 1 at a time.
Howard
Edited by: csphard on Apr 14, 2010 5:17 PM
Edited by: csphard on Apr 14, 2010 5:22 PM
Edited by: csphard on Apr 15, 2010 9:02 AM

Hello Howard,
Check out the following link here you can find your desired NLS parameters.
http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
And about the NLS_LANG for developer why you want to create for developer. Its is already there in REGISTRY. Just seaching in developer registry you can find there.
how do I set more than 1 at a time.
You can set only one NLS_LANG parameter at a time.
-Ammad
Edited by: Ammad Ahmed on Apr 15, 2010 8:52 PM

How do you set up a different ipad on same computer with different itunes library

I am trying to update a clients ipad (who does not have access to internet at his residence) on my personal computer. When I open up itunes with his apple ID, I continue to get my itunes library information. I don't want to mix my information with his information. How do you set up a different i pad/itunes on the same computer? What I need to do is update the version of his i pad as his i pad is version 4.2.1. Thank you

Create a new Windows user account on the computer.
(86398)

How to you set up a POP email account on iPhone 5S?

How do you set up a POP emial account on iPhone 5S. It only gives me an option for IMAP and I need POP
THANKS

Turn it on airplane mode. Then set up you new account with all of your credentials. Save, once it allows it. Turn Airplane mode off, and then go back and select POP.

How do you set up iTunes 10.5 on a new computer?, How do you set up iTunes 10.5 on a new computer?

I have a new computer with Windows 7, Outlook and I use iTunes with an Apple iPhone 4 and a iPad. My devices have iOS5. How do you set up iTunes 10.5 on a new computer and sync these devices. I have already downloaded iTunes 10.5 on my computer. Also, I use MobileMe. Thanks for your help. LCP

Thank you for your response. I have all of my files, etc. and am sitting here on the old computer. I just wasn't sure if I should simply save the iTunes program I am using or insall a new version.
After I get iTunes onto my new computer do I authorize the new computer before I plug in my IPod or after?
I'm sorry I didn't point out that I had all of my files available. For some reason, working with iTunes and my iPod make me nervous.
Thanks again.
Rustyglo

How can you set up more than one device on iTunes. I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices.

How can you set up more than one device on iTunes? I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices. I have all my music/videos on iTunes on my mac book pro. Can you set up separate folders for each device and drop in what ever music/videos from the main iTunes library?

In itunes it is called syncing and you can choose exactly what content to sync to all devices and it can be different for all of them
How to sync

How do you set repeat events for a given day of the week

How do you set a repeat event in calender for a given day of the month. Expample 3rd Wednesday each month?

Have you read the app store guidelines yet?
App Store Review Guidelines:
http://developer.apple.com/appstore/resources/approval/guidelines.html
Don't go on what you've seen in the store - for every example you spot, there are hundreds that didn't make it in.
As well, Apple is tightening up on reviews, etc.
Loads of discussion on this in the iOS Dev Forums, BTW

How do you set a default Home Page in the Safari Applet?

How do you set a default Home Page in the Safari Applet?

How do you set a default Home Page in the Safari Applet?

How do you set up SSHv2 on stacked 3750x

Similar Messages

Maybe you are looking for