How do you specifically let the Itemlistener know which Item was selected..

How do you specifically let the Itemlistener know which Item was selected in a JComboBox? Anyone has any idea? What should the coding look like?

getSelectedItem()

Similar Messages

How do you specifically let an Itemlistener know which Item was selected?

How do you specifically let the Itemlistener know which Item was selected in a JComboBox? Anyone has any idea? What should the coding look like?

Hi,
Try this method
String[] petStrings = { "Bird", "Cat", "Dog", "Rabbit", "Pig" };
JComboBox petList = new JComboBox(petStrings);
if ( petStrings[0]==(String)petList.getSelectedItem() )
System.out.println("I'm a bird");
}else{

SO Pricing User Exit - How to know which item is selected for re-pricing.

Hello Experts,
I have to modify material data when user does a update pricing in VA02, the problem is...How do I know which item is selected for re-pricing (in MV45AFZZ)? I am using user exit USEREXIT_PRICING_PREPARE_TKOMP.
For Ex: If my order has 3 items and 2nd one is selected and then 'Update' is done on 'conditions' tab. Above pricing user exit is triggered 3 times for all items, so I cant check XVBAP.
Your help will be appreciated.
Thanks,
Sagar

Hi J@Y,
Thanks for reply. But USEREXIT_PRICING_PREPARE_TKOMP is triggered for all items, so how do I know which is current item?
If you see in debug mode, xvbap-posnr and tkomp-kposn will have 10,20,30 everytime (for 3 times). How do I know if user has selected 20?
Thanks,
Sagar

How do you eliminate back the border width from a given selection?

Perhaps a stupid question, I dont know, but whenever I make a selection and then go to selection>modify>border to select any given width from 1 to 200px, how do you eliminate back any created width? the value 0 is not accepted, only from 1 up. Does this mean I have to deselect everything and start the whole selection back over? that would take a lot of time if my selection was a little complex and took me some time perform it!
I tried "googleing" that answer but couldnt find anyting so I am coming for help here.

It's unclear to me what you mean by "Eliminate back". Do you want just the border to extend inside the original selection?
Are you recording an action?
Keep in mind you can save any number of selections under different names via Select - Save Selection, then combine them with the Load Selection function using features like "Overlap" and "Subtract From Selection".
-Noel

Knowing which Row was selected when Hide/Show is clicked

Hi everyone,
I have an advanced table, with some search criteria that works. I have added a "detail" flag and when I click the link Hide/Show, the details are displayed.
How can I get in the code which Hide/Show link was clicked? I am more interesting in getting the Row from the VO which the Hide/Show link was clicked?
When I get the "event" parameter from the pageContext (pageContext.getParameter("event") ) it returns "hide" or "show", but I don't know which was row that was clicked.
What I am trying to accomplish is the following. In my advanced table I have "Select" checkBoxes. I want to add the "Hide/Show details" functionality and try to have the details displayed in an advanced table with its own "Select" checkBoxes.
Can it be done?

Hi,
Create a Primary Key in View Object's Query for the table.
Now to know on which row hide/show has been clicked you need to capture the row reference which is nothing but Primary Key for that row.
Use this code in processformrequest:
if(("hide".equalsIgnoreCase(pageContext.getParameter("event"))))
String rowReference = pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
TestMassDeleteSearchVORowImpl row = (TestMassDeleteSearchVORowImpl)am.findRowByRef(rowReference);
String lname = (String) row.getSelectFlag();//to get the value of checkbox
Thanks,
Gaurav

How can you turn off the braille setting on an iPhone 4s, once on it won't let you slide the phone into use mode to change the settings or do anything?

How can you turn off the braille setting on an iPhone 4s, once on it won't let you slide the phone into use mode to change the settings or do anything?

An alternate method is Accessibility Settings when connected to iTunes. You should be able to turn it off there. I would also check out some of the answers listed to the right of this post and see if they can help.

HT1212 How do you undisable an iphone not knowing the passcode or not having been synced to itunes

How do you undisable an iphone not knowing the passcode or being your phone being synced with itunes?

http://support.apple.com/kb/ht1808
Here you go : )

How do you turn off the pop up blocker

How do you turn off the pop up blocker

Hello karenlenore. You can turn on your pop-up blocker by following the instructions at this link. Let me know if this assists you or not. I'm only here to help!
http://support.microsoft.com/kb/909604
Mario

How do you get to the apps though the zune store!!...

how do you get to the windows app store with zune because going to the app store without zune i can't download any apps with the usb connector
thanks

Hi blanquito,
Thank you for your post. If you want to download applications, Marketplace is the place for it. You can also access it directly from your mobile via the app.
Hope this helps, let us know how you get on,
Sergent
If my response has helped you in any way, show it by hitting the WHITE STAR... If you don't a MONSTER will come and eat your lunch...
Also hit the Accept as solution button, so OTHERS can benefit from this helpful answer...
DON'T BE SHY...

How do you make ps6 the default program

how do you make ps6 the default program

I will let you know if works. Thanks    BobC
Date: Fri, 27 Sep 2013 11:17:43 -0700
From: [email protected]
To: [email protected]
Subject: How do you make ps6 the default program
    Re: How do you make ps6 the default program
    created by gener7 in Photoshop General Discussion - View the full discussion
Right-click on that saved image's thumbnail in Windows to bring up a menu.
Select "Open with..." and from that "Choose default program"
A box will open up with a list of Programs to choose from. Photoshop CS6 64 bit should be in that list.
Make sure "Always use the selected program to open this type of file" is checked.
If you do not see it in the list, click the Browse button in this box and it will show folders in the Program Files directory. Double click "Adobe" then Photoshop CS6 (64-bit), then select Photoshop.exe and click "Open". It should add it to the list.
Click OK and when you double-click on your saved file, it should open in Photoshop.
Let me know if that worked for you or if you have other questions.
Gene
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5719659#5719659
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5719659#5719659
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5719659#5719659. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I ordered a battery for my laptop because it said to replace battery soon. How long can I let the new battery sit around as I wait for the old one to run out of more charge?

I ordered a battery for my laptop because it said to replace battery soon. How long can I let the new battery sit around as I wait for the old one to run out of more charge? Will the new one become less effective if it sits around too long?

How much capacity is remaining on your current battery?
Check your power status
From the  menu: Hold OPTION and click System Information... èHardware è Power
Copy and Paste in your reply.
The new battery will become less effective if you store it in a hot or humid environment. It should be stored at room temperature (22 C).
Long term storage (6 months):
Apple recommends that you store the battery with a 50% charge. If you store a battery when it’s fully discharged, it could fall into a deep discharge state, which renders it incapable of holding any charge. Conversely, if you store it fully charged for an extended period of time, the battery may experience some loss of battery capacity, meaning it will have a shorter life.
http://www.apple.com/batteries/

How do you get into the BIOS on a Satellite 320 CDS.

Hi my name is steve I was wondering how do you get into the BIOS on a satellite 320 CDS. As this is my first format on a lap top. Done plenty on desktop computers just never laptops. As some fool tried to do it before me and distroyed it. Now the only thing that happens is after the toshiba logo disappears this message comes up, INVALID SYSTEM DISK, REPLACE THE DISK AND THEN PRESS ANY KEY. It use to run Windows 98 and it worked great for how old it is. Was hoping to put XP on it but its only got a small hard drive (4099mb). So will have to put 98 back on it till I get a bigger hard drive.Only need it to teach my daughter how to respect a laptop. I mainly want to get into the BIOS for format. Any instruction on how to get into the BIOS would be great, as I'm good from there. Thank you in advance for your help.

Hi,
I don't know the exact method for the Satellite 320 CDS.
But most of the Toshiba notebooks use one of the following methods.
If you see a message while booting "Press F2 to enter setup", do it and you get into BIOS.
Or you have to press ESC while booting, then press F1 when prompted to and you are in the BIOS.
Bye

How do you turn off the auto select behavior when working with shape layers?

How do you turn off the auto select behavior when working with shape layers?
I am using either of the path selection tools to select only some of the paths on the layer. I have the proper layer targeted. I have the selection too auto select option turned off.
If another layer has a path in that area, that layer becomes auto targeted and I get the wrong path. Turning off the layer is the only way to avoid this but then I have to turn on the layer back on between making my selection and transforming to use the other layer as guide. Is there any way to stop this auto select? Locking the other layer does not stop the auto select, just prevents editing.

As far as i know the move tool options don't have any effect on the path selection tools.
You might try clicking on one of the path points or on the path itself with one of path selection tools and if you want to select multiple points
you can shift click with the Direct Selection Tool or Alt click to select the entire path.
more path shortcuts:
http://help.adobe.com/en_US/photoshop/cs/using/WSDA7A5830-33A2-4fde-AD86-AD9873DF9FB7a.htm l
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7391a.h tml

How do you turn off the special characters for letters?

How do you turn off the special characters for letters? Where you hold down the key and it comes up with variations of the letter. For example ï í î ò œ å ß ł û
It is very annoying when I try to play any online games. Thanks for the help

Thank you so much It worked Thank you

How do you iMessage from the MacBook Pro

How do you iMessage from the MacBook Pro?

Lord Of The Weirdos wrote:
And if you don't use that computer often be prepared for the mountains of new notifications the next time you run it. Especially if your like me and use your iPhone and iPad a lot for texting people. Wish iMessage in ML would know what you read somewhere else like iPad and iPhone does
I don't quite understand what you are saying? If i recieve and read an iMessage on the iPhone and then switch on my Mac, I don't get a notification about a new message, but that iMessage appears on the conversation.

How do you specifically let the Itemlistener know which Item was selected..

Similar Messages

Maybe you are looking for