How do you specify class file for appletviewer?

List,
I have searched over dozens of posts for "NoClassDefFoundError" and "wrong name" as well as "appletviewer" and others. I have read many posts about people who have the same problem I do, but I still can't seem to find a remedy:
My machine is running Windows ME
My application runs fine stand-alone
(it's main() method sets up and runs the init() method it is intended to be an applet)
My classpath includes "." as well as the JDK directory and the full path to my applications jar file
All classes are part of the package iCalendar and jar'd in a file called iCalendar.jar
When I compile and run my app stand-alone I use the following:
javac ./iCalendar/ViewController.java
java iCalendar.ViewController
However I cannot get the application to run in either appletviewer or the browser. My applet tag is as follows:
<APPLET CODEBASE="." CODE="ViewController.class" ARCHIVE="iCalendar.jar" width=700 height=700>
I consistently get the message NoClassDefFoundError wrong name: iCalendar/ViewController
So if anyone could tell me what set up is need to get this app running in appletviewer/browser I would be greatly appreciative, I've been on this all day!
Patrick

Drop one iCalendar out. The classpath should not
contain the path C:\JavaObjects\iCalendar.I did this, I also removed all duplicate copies of the .class files to make sure appletviewer only has the jar file to work with. My new CLASSPATH is:
.;C:\JavaObjects;C:\JavaObjects\iCalendar\iCalendar.jar
You should also decide whether to use the jar file or
not - that can cause problems with netscape -
weird problems.I definetely want to figure this out using the jar file, I want the entire jar downloaded to minimize trips to the server.
Try putting iCalendar.jar and iCalendar.html to
another directory and it should work - somehow
(probably because of the classpath or because
iCalendar.html is not where it should be) the
appletviewer is picking the class from outside the
jar.I created a directory off of the root C drive and called it temp, I copied the jar file and the html file to the temp directory and then tried appletviewer from the command line:
NoClassDefFoundError: ViewController (wrong name: iCalendar/ViewController)
Can this be because the jar file contains all of the class files whom all belong to the package iCalendar? Because to run it stand alone I must address iCalendar.ViewController, do I need to jar these files differently, and if so can I jar the directory structure?
Thanks again for the help, I have no clue at this point.

Similar Messages

How to get the .class file for the extended Controller .java file

Hi,
I did the below steps.
1. Created New OAWorkspace
2. Created New project
3. Imported the page .xml file
4. Added new .java file by extending the controller class
5. Added code in the .java file.
6. Ran the .xml file
As I copied all the folders from Unix box, the page was opened.
But My question was where can I see the .class file the extended controller. It's a .java file. How to compile and get the .class file for this .java file. If I get this .class file, I can go to the page and click the personlize page. and change the Controller name to the new path by ftp ing the new class to the cust.oracle.apps.pos.changeorder.webiui.
Please let me know how to create the .class file.
Thanks,
HP

All are Java files are stored in JDEV_INSTALL_DIR:\jdevhome\jdev\myprojects\
In your case the path java would be
JDEV_INSTALL_DIR:\jdevhome\jdev\ myprojects \cust\oracle\apps\pos\changeorder\webui\
AND
Once you compile the java file in Jdeveloper, Class files get generated @ below path
In your case the path of class would be
JDEV_INSTALL_DIR:\jdevhome\jdev\ myclasses \cust\oracle\apps\pos\changeorder\webui\
Duplicate Thread-
Thanks
--Anil
http://oracleanil.blogspot.com/

How do you convert .AVI files for using in iMovie without losing the original clip time and date

Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
paul

Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
paul

How do you crop QT file for projection on a video projector?

Trying to output QT files for playback on video projector in normal NTSC 4:3 aspect...the projector will be hooked up to a PC and play thru whatever inane video player the PC uses...therefore it will be displaying more of the image than a normal 4:3 frame....
problem is: in my FCP project I shifted some images in the 4:3 frame using the Motion tab...thererfore when they are played in QT player or on a computer, or thru a projector (as in this case) the extra bits of the image off to the side and top and bottom that would never be visible on a 4:3 frame are now visible...
if I crop the image, then I get a black box around the outside...do I resize the output file in terms of pixels or do I have to create a mask in QT to play without a black border?
Please help.

I see - you're concerned about blanking and other 'blackspace.'
If that's the case, try this:
Drop your QT movie into Compressor 3
Apply the DV-NTSC setting (under Advanced Format Conversions)
In the Geometry Pane, adjust the Crop values for the 4 edges to taste (I'd highly recommend scrubbing thru to make sure you've not over/undercropping).
I'd personally recommend dragging the red borders in the Preview window, just be aware of a small screen bug where it squishes the image (if only in the Preview window). To counteract that, hit the Back arrow button in the Preview window (top left), then hit the Forward button. Toggling between the source file (by hitting back) and destination file (by hit forward) allows the image to 'pop back' correctly.
If you were only worried about blanking - the black edges that cameras produce, then you'd only need to crop maybe 8 pixels from the left and right. But since you've got more stuff to worry about it, it's hard to suggest what to do, exactly. But remember to crop according to aspect ratio. That is, if you're taking 8 pixels off the left and right each, you've got to take 6 off the top and bottom each (aka keep the trims 4:3) otherwise you'll distort your image, however slightly.
Confirm that Frame Controls are activated and that Resize is set to Better. (This will dramatically increase encoding time, but otherwise, your output will be very poor). However, unless you're working on a very robust machine (or have a lot of time to kill), I would not adjust any setting to Best - it simply takes too long.
Submit. And wait for it.
You output will now be a 720x480 file with no blanking or other 'blackspace.' If you've got Frame Controls set right, you shouldn't see much, if any, reduction in image quality.

HT1284 how do you specify what files you want to backup

how to back up only certain files?

You add or remove items from the exclusion list in the Time Machine pane of System Preferences. By default, the startup disk will be backed up, while external drives won't be.
(74860)

How do you specify a line number with getline() (c++)

How do you specify which line for getline() to read with c++ similiar to how awk uses $1, $2, $3 , etc etc...
Example:(Ignore the underscores)
Line1 Line2
10____10
20____20
30____30
40____40
if I were making a program to remove 10 on the first line and 20 on the second line how would I tell getline which line to read
Example source code:
#include <cstdio>
#include <fstream>
#include <string>
#include <iostream>
using namespace std;
int main()
string line;
string line2;
ifstream in("/Users/lundquisted/Desktop/infile.txt");
ofstream out("/Users/lundquisted/Desktop/outfile.txt");
while( getline(in,line) )
if(line != "10")
out << line << endl;
while (getline(in,line2) )
if(line2 != "20")
out << line2 << endl;
in.close();
out.close();
remove("/Users/lundquisted/Desktop/infile.txt");
rename("/Users/lundquisted/Desktop/outfile.txt","/Users/lundquisted/Desktop/inf ile.txt");
return 0;
}

Eric Lundquist wrote:
store the output of a system() command within a c++ program to a string and/or variable
A number of apps call Unix utilities and capture both stdout and stderr, typically for viewing in a log window, but for other uses as well. Xcode, for example, starts up gcc and does various things with the text that gcc might otherwise print in a Terminal window. Most apps that rely on Unix commands that way don't use "system()", which is a rather crude way of launching utilities that leaves the parent program with very little control. Usually, the best way to manage helper utils from a Cocoa app is by using NSTask and NSPipe. If you spend some time with the two following pages, you'll learn how to do almost anything you want with command line utils from inside a Cocoa app:
[http://www.cocoadevcentral.com/articles/000025.php]
[http://macosx.com/forums/archive/t-3927.html]
The first link goes to a great tutorial on using NSTask. Capturing stdout and stderr are only covered briefly towards the end, however. Note the last comment explaining why "system()" is a bad idea.
The second link goes to a forum thread. Scroll down to the code posted by "blb" for some very clear examples of launching with NSTask and reading the output with NSPipe.
If you really want to use a shell command, you could give NSTask a command like ' +bash -c "ls -lt | grep drwx"+ ' (see how setArguments: is used in the tutorial).
If you just want to do something cheap and dirty with "system()" so you can see some awk output while you're learning how to do things the right way, I guess you could do something like this:
system(" cat ~/random.txt | awk '{print $2}' > MyFile.txt");
NSString *myString = [NSString stringWithContentsOfFile:@"MyFile.txt"
encoding:NSUTF8StringEncoding error:nil];
Of course you can just read MyFile.txt into cin if you're not using Cocoa.
- Ray

Error Msg - "You must add the Class files for this enterprise bean"

Hi,
I am creating creating new enterprise bean using j2sdkee1.2. I am able to create .ear file in desired folder, but can not create .jar. Please help. Getting above error message.
remote, home interface files and file having business logic (EJB) is compiled and kept at desired location.
j2ee server started, Deploytool is started.
Then I can successfully create new application (.ear file)
Then I go for creating new enterprise bean. I get same application name in Drop down list named "Enterprise Bean will go in".
Then I can add home, remote and ejb class file to create jar ("Add" under "Contents" ).
When I say ok after adding these 3 files, I am getting error - "You must add the Class files for this enterprise bean".
In the deploytool console, getting error - "java.io.FileNotFoundException: C:\2sdkee1.2\mahesh\ConverterEJB.class (The system cannot find the path specified) "
Can you please help me where to configure the path?
Can u please help?
Please send your answer to - [email protected]
Cheers!

the path really begins with '2', without a 'j', ie not c:\j2sdkee1.2\...?
"java.io.FileNotFoundException:
C:\2sdkee1.2\mahesh\ConverterEJB.class (The system
cannot find the path specified) "

How to convert a class file to exe file and how to cteate a class file to d

how to convert a class file to exe file

Hi Bhaskarq,
Hi,
It is not at all possible.
But it is a really worst method.
Please go through it.
This is a very common question asked in the comp.lang.java newsgroup. Its often useful to have an
executable application when deploying your
applications to a specific platform, but remember to
make your .class files available for users running
Unix/Macintosh/other platforms.
Microsoft provide a free system development kit (SDK),
for Java, which includes the jexegen tool. This
will convert class files into a .EXE form. The only
disadvantage is that users need a Microsoft Java
Virtual Machine (JVM) installed. If your target
platform is Win32, you can either redistribute the
virtual
machine, or raise the level of your system
requirements, to include Windows 98, or Windows 95
with
Internet Explorer 4. Systems matching these
requirements will already have a copy of the Microsoft
Java Virtual Machine installed.
Note : You must specify all of the class files your
application needs (except for standard java packges)
as a parameter, so if you have third party libraries,
you'll need to include them as well. You can use wildcards * though, and you don't need the original source code.
Also please see this Forum which will give a good idea
http://forum.java.sun.com/thread.jsp?forum=31&thread=149733
I hope this will help you.
Thanks
Bakrudeen
Technical Support Engineer
Sun MicroSystems Inc, India

HOw to create a Batch file for java application and whats the use of this ?

HI,
How to create a Batch file for java application ?
And whats the use of creating batch file ?
Thanks in advance

First of all, you're OT.
Second, you can find this everywhere in the net.
If you got a manifest declaring main class (an classpath if needed), just create a file named whatever.bat, within same directory of jar file, containing:
javaw -jar ./WhateverTheNameOfYourJarIs.jar %*By the way, assuming a Windows OS, you can just double click the jar file (no batch is needed).
Otherwise use:
javaw -cp listOfJarsAndDirectoriesSeparedBySemiColon country/company/application/package/className %*Where 'country/company/application/package/' just stands for a package path using '/' as separator instead of '.'
Don't specify the .class extension.
Javaw only works on Windows (you asked for batch, I assumed .BAT, no .sh), in Linux please use java.exe (path may be needed, Windows doesn't need it 'cause java's executables are copied to system32 folder in order to be always available, see PATH environment variable if you don't know what I'm talking about) and use ':' as classpath (cp) separator.
The '%***' tail is there in order to pass all parameters, it only works on Windows, refer to your shell docs for other OSs (something like $* may work).
This way you have a command you can call to launch your code (instead of opening NetBeans just to see your app working). You could schedule tasks on it or just call it in any command prompt (hope you know what it is 'cause there have been people in this very same forum with no clue about it, if not just hold the 'Windows button' and press 'R', then type 'cmd' and run it).
Finally add dukes and give 'hem away.
Bye.

How to convert java class file version without decompiling

Hi,
Oracle R12.1.3 i am having illegal access error while try to access the class file version Java 1.3 uses major version 47,So how to convert the class file version without using decompiling.
Current java version is 1.6.0_07
Is there any tool or API for converting class file version?
Thanks,
Selvapandian T

Beside this I wonder where you get your error from since AFAIK 12c comes with java 1.6.
Well wonder no more!
OP isn't using Oracle 12c database.
They are using Oracle R12.1.3 - which is the E- Business Suite.

Cannot find the class file for com.sap.portal.services.api.connectorgateway

Hi,
I was trying the "How to BI JAVA SDK in a Portal iView and get the following error.
The project was not built since its classpath is incomplete. Cannot find the class file for com.sap.portal.services.api.connectorgateway.IConnectorGatewayService. Fix the classpath and try rebuilding this project.
I have the following in my portalapp.xml file
<property name="SharingReference" value="com.sap.portal.ivs.connectorservice"/>
and i have also added the jar file "com.sap.portal.ivs.connectorservice_api" in the set of lib's
Has some faced a similar issue? or can someone suggest how I could possibly resolve this.
Thanks,
Smitha

Hi Smitha:
My webdynpro dc was build failed for "This compilation unit indirectly references the missing type com.sap.engine.services.webservices.espbase.client.dynamic.content.GenericObject (typically some required class file is referencing a type outside the classpath)".
How should i do? Thank you!

How to make the class files to run in a particular platform only

Class files which are created from the java files should only run on a particular platform only..say i'm going to create the class files for windows environment then those class files should only run on that environment only. it should not run on unix environment etc..how to do this..

hi,
i cant think of a reason why you would do something like that.. You cant prevent your class files to be read by the JVM of a different OS, but anyway you could do something to stop your code from running in a different OS, for eg.
Properties prop = System.getProperties();
if (prop.getProperty("os.name").startsWith("Windows")==true)
//code
else
System.out.println("Sorry i will not run in this OS");
}cheerz
ynkrish

How do you delete a file from an iPad?

How do you delete a file from an iPad?
There are 2 versions of a document file on my iPad.
I want to get rid of the obsolete one.
The iPad Users Guide does not describe how to delete a document file.
This is very frustrating!

The iPad Guide is for the iPad itself, not other apps you may install.
If you use Pages then read the online help here: http://help.apple.com/pages/ipad/2.2/ - specifically this: http://help.apple.com/pages/ipad/2.2/#/tancfc4d5c02
Delete a document from your iOS device
In the document manager, tap Edit.
When the documents begin to jiggle, tap the ones you want to delete.
Tap , then tap Delete Documents.To cancel, tap anywhere in the document manager background, or tap Done.

How to create different log files for each of web applications deployed in OC4J

Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

How to Generate a Java file for a JSP Page

Hi ,
I am using weblogic11 .
I am working on a JSP page which nearly consists of 4000 lines of code.
I need to debug the file , but weblogic server is not generating the java file for the JSP pages .
Please let me know how can i genertae Java file for the jsp pages ??

JSPs are compiled into servlets automatically and those classes are stored in WEB-INF/classes folder. Servlet engine handles servlets.

How do you specify class file for appletviewer?

Similar Messages

Maybe you are looking for