How does a CIN code works in LabVIEW?

hi..can any one explain as to how a CIN code (written in c/c++) works in LabVIEW.Do we have to import the c/c++ file too when we import the respective VI? How does the CIN code work in an exe file without having to load the C/C++ code?

When you create the VI that calls the CIN you load the binary object code into the code interface node itself and it's stored as part of the VI. Hence you don't need to include anything special in your build. Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

How does the multicolumn listbox work?

how does the multicolumn listbox work?

Code attached
[email protected]
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
Get_DlbClk_Row_ifk2003.vi ‏31 KB

ColdFusion 11: cfclient ... how does normal CFML code and cfclient code interact?

G'day:
I am reposting this from my blog ("ColdFusion 11: ... how does normal CFML code and code interact?") at the suggestion of Adobe support:
@dacCfml @ColdFusion Can you post your queries at http://t.co/8UF4uCajTC for all cfclient and mobile queries.— Anit Kumar Panda (@anitkumar85) April 29, 2014
I have edited this in places to remove language that will be deemed inappropriate by the censors here. Changes I have made are in [square brackets]. The forums software here has broken some of the styling, but so be it.
G'day:
Another quick one. I'm raising these quick-fire questions here because Adobe have declined to suggest a better place to raise them, other than as comments on one of their blog entries. Well that was Ram's suggestion (which I don't think is terribly-well thought out). He declined to react to my suggestion that the Adobe ColdFusion forums might be a good place. Anit suggested Twitter or just emailing him, but I think there'd be public interest in this stuff, so don't want to resort to email.
As I'm the master of what goes on on this blog: I'll clutter this thing up.
Say I want to have a mix of "normal" CFML and <cfclient>-based CFML in the same file. I can only presume the intent is to allow this, otherwise having <cfclient> as a tag rather than just a file extension seems like a poor approach. Obviously if one can have a start tag and an end tag, then code can come before (and I guess after) the <cfclient> tags themselves.
So I'd expect this to work:
<cfset message = "G'day World"> <cfclient> <cfoutput>#message#</cfoutput> </cfclient>
However all I get is an error in JS:
Uncaught ReferenceError: message is not defined variablesScopeVariable.cfm:4
And, indeed, the only mention of message in the JS source is the one that's erroring (as it's on the right-hand side of an assignment).
So I thought perhaps <cfclient> worked like <cfthread> and I needed to pass attributes into it:
<cfset message = "G'day World"> <cfclient message="#message#"> <cfoutput>#message#</cfoutput> </cfclient>
This doesn't compile:
Attribute validation error for the client tag.
The tag does not have an attribute called message. The valid attribute(s) are ''.
ColdFusion cannot determine the line of the template that caused this error.This is often caused by an error in the exception handling subsystem.
Note also there's an error in the error message itself. It's not the <client> tag, it's the <cfclient> tag.
Rightio then, so I tried just using the request scope instead (the code's the same as the variables-scoped example, except using the request scope). No dice: same JS error.
As a last ditch effort, I just tried to see if <cfclient> was aware of anything going on around it, by passing a value on the URL, and seeing if <cfclient> saw that, eg:
<cfclient> <cfoutput>#URL.message#</cfoutput> </cfclient>
This behaved differently from the variables- / request- scoped examples, in that I didn't get a JS error, I just got this on the screen:
undefined
And no JS error. It pains me to have to do this, but let's look at the generated JS to see why the behaviour is different:
Variables scope example:
<script type="text/javascript" src="/CFIDE/cfclient/cfclient_main.js"></script> <script type="text/javascript" src="/CFIDE/cfclient/cffunctions.js"></script> <meta name="viewport" content="width=device-width"> <script type='text/javascript'> globalDivStruct=null; var _$variablesScopeVariable_func=function(){ var self=this; var variables={}; self.__init=function(){ var localdivstruct=globalDivStruct; var __output_var=""; var tmpVarArray={}; localdivstruct.outputvar+=message; return"" } }; function __startPage__$variablesScopeVariable(){ document.write("\x3cdiv id\x3d'__cfclient_0'\x3e\x3c/div\x3e"); window.ispgbuild=false; var clientDivStruct={ divId : "__cfclient_0", outputvar :"" }; globalDivStruct=clientDivStruct; try{ _$variablesScopeVariable=new _$variablesScopeVariable_func; _$variablesScopeVariable.__init() } catch(__eArg){ if(__eArg!=="$$$cfclient_abort$$$") throw __eArg; } __$cf.__flush(clientDivStruct) } __startPage__$variablesScopeVariable(); </script>
The only significant difference (other than function names, based on the file names) between this and the URL-scoped example is the indicated line above is replaced by this in the URL example:
localdivstruct.outputvar+=__$cf.__arrayGet(URL,"message",true);
So it's like it's trying to do the right thing, but just failing. I thought it might be because CF does stupid thinks with scope-key casing, and changed the <cfclient> code to expect URL.MESSAGE not URL.message, but this didn't work either.
So I'm flummoxed. I can't find anything in any documentation which might point me in the right direction, so anyone know what the story is here?
Update:At Joel's suggestion I tried this:
<script> message = "G'day World"; </script> <cfclient> <cfoutput>#message#</cfoutput> </cfclient>
Thisworked. Which elicits from me a mixture of "heh: cute" and "this is an abomination".
Adam

PaulNibin wrote:
Hi Adam,
When you write code inside <cfclient>, it is translated to java script. It cannot access server side variables(defined outside cfclient).
<script> message = "G'day World"; </script> <cfclient> <cfoutput>#message#</cfoutput> </cfclient>
The above code works because, message is defined in a script block and client side CFML is interoprable with javascript. So client side CFML can use variables, functions defined in javascript blocks.
Thanks,
Paul
So you're saying you did not provide a mechanism for transferring the variables from the server-side part of a file's code to the client side part? Is this not a bit of an oversight?
And what - in your mind - is the point of having a file with blocks of both normal CFML, and then a <cfclient> block, then more CFML, then another <cfclient> block (for example) if the code cannot interact?
Adam

How does the .accept() method work?

Hi,
I have checked the source code of the ServerSocket implementation that comes with the jdk.
I tought I was going to find some type of loop. However I found nothing like that! so how does the accept method work.
I mean when we call the .accept() method, the thread in which the socketServer is initialized gets stoped untill a new client connection is recieved! how is this actually managed?
Regards,
Sim085

At a guess, the accept call that Java makes, relies on the OS system call through JNI. accept would then block until a new connection is present if you are using blocking.

How does operator 'less than' work with Rectangle objects?

Just found in legacy code the following:
private var firstRect:Rectangle;
private var secondRect:Rectangle;
if (firstRect < secondRect)
// do something
How does operator 'less than' work with Rectangle objects?
Doc says that object is converted to number if it is not a String.
Rectangle is not a String, though has conversion to String.
Please help.

IME the best way to know for sure is to experiment. The docs are only one person's best understanding of how things worked on the day, which is seldom 100% accurate. I find that even with code I wrote I can't accurately say 100% of what it does until I've worked with it for a while. Keep in mind that the docs are usually written when the code is written, so never expect more than a rough idea from the docs.

How does CDC consistant mode work

Gurus,
Please explain in simple words how does CDC consistant mode works and what are the Min_window and Max_window_id we see in the code generated by ODI
Thanks

When you turn off the iPod and then return to it within a few minute/hours, it will resume from where you left it. So far, so good.
However, if you leave the iPod inactive for a period of 14 hours or more, it goes into a hibernation mode in order to conserve battery power. Then when next you turn it on, the iPod will restart with the Apple logo, and return to the main menu. Under those circumstances, it will not resume from the point you left it.

Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two?

Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two? also I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?

Is it possible to have your whole family on one apple id or is it better to have each person have there own?
Yes, it is possible. 1 apple ID can be associated with up to 10 devices.
If each has their own does each id have to buy their own music and apps?
Yes, all purchases are non-transferable.
How does find my iphone work with one apple id or two?
Every device associated with one apple ID through Find my iPhone is tied to that Apple ID; Find my iPhone will work in the same way with up to ten devices associated with one apple ID. You cannot enable Find my iPhone for one device across two apple IDs
I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
If you have authorized a computer with the old apple ID, you can transfer old media purchased through the old to other devices via iTunes. This doesn't mean the media purchases through the old apple ID it transferred to the new account. If you plan to make future purchases and don't wish to share them with others, make your own apple ID.

How does this IMPORT statement works

can any one tell me how does this statement will work..
I am wokring on Solution manager system , where in there is a function module SSF_FIELD_LIST
to which system passes form name.
import fields to fieldlist
from database stxfcontr(sf) id l_fullname.
stxfcontr is a table which contains value of in a diff
Regards,
mayank

It will import data object stored in memory under named fields to your custom data object fieldlist .
The table which it is stored is name stxfcontr under RELID (memory area) SF .
Cluster key (key of the entry) in that table is behind var l_fullname
Anyhow I think [this link|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3bf8358411d1829f0000e829fbfe/frameset.htm] is more that any explanation. Once you study it, you will understand the above.
Regards
Marcin

How does the event structure work & ...

How does the event structure work & and how to modify the case example if you want to change the name of the case? I haven't a look at the manual but nothing about event structure is mentioned.

I know how it works.. =P

How does "notify me" actually work in mail app

Might be a daft question, but how does "notify me" actually work in iPhone email app?
I get the principal but surely when you get a reply thats already noticed you?
Could someone advise me how it actually notifies and is it in addition to receiving the reply to the mail?

I have the columns in place. But I have a few questions -
1. Iis there some kind of audit trail report on the updates to my record to the table? If so how do I get to see?
2. Am I expected to create a <entity name>_HISTORY table for this to work? I see some such recommendation here .

How does mix and match works in ECC6.0?

How does mix and match works in ECC 6.0?
Can some shared on this topic?
Thanks in advance

It;s a term used in Retail for combination of sales item eg buy 3 get 1 any other @ xx price.

How does the verizon wifi work? Do you pay monthly?

I want to buy the new iPad with retina display as a gift, but how does this verizon wifi work? Do you pay monthly or have to call Verizon?

You're post is a little confusing. WiFi signals are not done through Verizon unless you are talking about using a Verizon MiFi hotspot such as this http://www.verizonwireless.com/b2c/store/controller?&item=phoneFirst&action=view PhoneOverviewByDevice&deviceCategoryId=13&cmp=KNC-58700000028195084&zipRdr=y.
4G wireless cell signals are done through Verizon. WiFi comes from places such as your home wireless network, or WiFi hotspots at places like Starbucks, restaurants, pubs, etc.
If you are asking about Verizon's wireless cell service, it's $20 a month for 1 gig of data, $30 a month for 2 gigs of data, or $50 a month for 5 gigs of data.

How does the notify() call work in Java?

Hi!
Can someone help me:
How does the notify() call work in Java?
H�var

Java's Thread Tutorial
JavaWorld: Introduction to Java threads
IBM: Introduction to Java threads
Google: java+threads+tutorial

How does the copy button work in safari for ipad (copy button under facebbok share button)?

How does the copy button work in safari for ipad (copy button under facebbok share button)?

On a website ...
Tap the Action icon bottom of that window. (white square with a right facing arrow) then tap Facebook.
You should see the following depending on the what content the website can share.
Copy / Mail / Message / Twitter / Print / Bookmark

How does the Passbook application work? How am I able to import my plane ticket, concert ticket etc into Passbook?

How does the Passbook application work? How am I able to import my plane ticket, concert ticket etc into Passbook?

Try the following to fix the iTunes Can't Connect issue that you are having:
Open Settings.
Open General.
Open Date & Time.
Switch the Set Automatically setting to Off.
Open Set Date & Time.
Set the date to a year ahead.
Go back to the Home screen and open Passbook.
Tap the App Store button. The App Store should load.
Go back to Date & Time and turn on Set Automatically.
Thanks to: https://discussions.apple.com/message/19622208#19622208

How does a CIN code works in LabVIEW?

Similar Messages

Maybe you are looking for