Cisco ASA SFR Access control policy
Hi All,
I got an issue while applying access control policy on defense center . it's saying as "does not have a Protection license (required for Intrusion Policy support, File Policy support, and Security Intelligence)" . But when i checked in device management . the target device showing licensed.
Could you any body help to solve this issue. Please find attachment for your reference.
OK - I was talking about the module software, not the FireSIGHT Management Center. Your screenshots show it still at the 5.4.0 release.
If that doesn't work, I'd call the TAC. It will be interesting to hear your support experience since they just completed the transition from the old Sourcefire TAC to Cisco TAC a couple of weeks ago.
Similar Messages
-
Sourcefire access control policy and intrusion policy
hi.
i have a question.
what is the diffrerence between access control policy and intrusion policy.The access control policy is where you'll apply your different intrusion policies to different pieces of your traffic flow. You can also apply "content" filtering, access restrictions, monitoring, and file inspection.
The intrusion policy is where you configure rules that you will apply to traffic in your access control policy. -
How can OWB apply information access control policy?
Hi friends,
My question is "how can OWB apply information access control policy in DW?"
RegardsHi,
what exactly do you mean by "information access control policy"?
What you cannot do in owb is define grants or virtual private database (vpd) constraints.
What you can do is restrict the developer's access to owb objects in the repository.
Regards,
Carsten. -
CISCO ASA 5505 bandwidth Controll and split
Dear All,
Below am giving the infrastructure which i like to do please help me.
I Am Using Cisco ASA 5505 VPN Firewall and 6Mbps 1:1 dedicated internet connection.
in Lan Side we have 3 networks one for Internet Users one For VPN Users One for CCTV
i would like to split the 6Mbps bandwidth for these network 3 networks 3x2 each
each network use 2Mbps bandwidth. The VPN and CCTV Users use up to 6:00 pm after that the bandwidth will be free
after the 6:00 pm we need to use the the VPN and CCTV line bandwidth to the internet Users.
Cisco Adaptive Security Appliance Software Version 7.2(4)
Device Manager Version 5.2(4)
Compiled on Sun 06-Apr-08 13:39 by builders
System image file is "disk0:/asa724-k8.bin"
so please help me with suitable configuration for my purpose./please tell me which device will support for this/what is have to do for this.
Thanks
Lalu R.SThere's not much of that sort of functionality built into the ASA 5505 entry level firewall. To do that sort of thing in the firewall, you would have to move up to one of the newer 5500-X series with next generation firewall features and build a policy using Application Visibility and Control (AVC).
You can do some crude controls with QoS - the configuration guide chapter on doing that is here. -
A possible bug related to the Cisco ASA "show access-list"?
We encountered a strange problem in our ASA configuration.
In the "show running-config":
access-list inside_access_in remark CM000067 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:http_access
access-list inside_access_in remark CM000458 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:https_access
access-list inside_access_in remark test 11111111111111111111111111 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security
access-list inside_access_in extended permit tcp host 1.1.1.1 host 192.168.20.86 eq 81 log
access-list inside_access_in remark CM000260 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:netbios-dgm
access-list inside_access_in remark CM006598 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:netbios-ns
access-list inside_access_in remark CM000220 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:netbios-ssn
access-list inside_access_in remark CM000223 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:tcp/445
access-list inside_access_in extended permit tcp 172.31.254.0 255.255.255.0 any eq www log
access-list inside_access_in extended permit tcp 172.31.254.0 255.255.255.0 any eq https log
access-list inside_access_in extended permit udp 172.31.254.0 255.255.255.0 any eq netbios-dgm log
access-list inside_access_in extended permit udp 172.31.254.0 255.255.255.0 any eq netbios-ns log
access-list inside_access_in extended permit tcp 172.31.254.0 255.255.255.0 any eq netbios-ssn log
access-list inside_access_in extended permit tcp 172.31.254.0 255.255.255.0 any eq 445 log
access-list inside_access_in remark CM000280 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:domain
access-list inside_access_in extended permit tcp object 172.31.254.2 any eq domain log
access-list inside_access_in extended permit udp object 172.31.254.2 any eq domain log
access-list inside_access_in remark CM000220 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:catch_all
access-list inside_access_in extended permit ip object 172.31.254.2 any log
access-list inside_access_in remark CM0000086 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:SSH_internal
access-list inside_access_in extended permit tcp 172.31.254.0 255.255.255.0 interface inside eq ssh log
access-list inside_access_in remark CM0000011 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:PortRange
access-list inside_access_in extended permit object TCPPortRange 172.31.254.0 255.255.255.0 host 192.168.20.91 log
access-list inside_access_in remark CM0000012 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:FTP
access-list inside_access_in extended permit tcp object inside_range range 1024 45000 host 192.168.20.91 eq ftp log
access-list inside_access_in remark CM0000088 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:PortRange
access-list inside_access_in extended permit ip 192.168.20.0 255.255.255.0 any log
access-list inside_access_in remark CM0000014 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:DropIP
access-list inside_access_in extended permit ip object windowsusageVM any log
access-list inside_access_in extended permit ip any object testCSM-object
access-list inside_access_in extended permit ip 172.31.254.0 255.255.255.0 any log
access-list inside_access_in remark CM0000065 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:IP
access-list inside_access_in extended permit ip host 172.31.254.2 any log
access-list inside_access_in remark CM0000658 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security
access-list inside_access_in extended permit tcp host 192.168.20.95 any eq www log
In the "show access-list":
access-list inside_access_in line 1 remark CM000067 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:http_access
access-list inside_access_in line 2 remark CM000458 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:https_access
access-list inside_access_in line 3 remark test 11111111111111111111111111 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security
access-list inside_access_in line 4 extended permit tcp host 1.1.1.1 host 192.168.20.86 eq 81 log informational interval 300 (hitcnt=0) 0x0a 3bacc1
access-list inside_access_in line 5 remark CM000260 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:netbios-dgm
access-list inside_access_in line 6 remark CM006598 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:netbios-ns
access-list inside_access_in line 7 remark CM000220 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:netbios-ssn
access-list inside_access_in line 8 remark CM000223 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:tcp/445
access-list inside_access_in line 9 extended permit tcp 172.31.254.0 255.255.255.0 any eq www log informational interval 300 (hitcnt=0) 0x06 85254a
access-list inside_access_in line 10 extended permit tcp 172.31.254.0 255.255.255.0 any eq https log informational interval 300 (hitcnt=0) 0 x7e7ca5a7
access-list inside_access_in line 11 extended permit udp 172.31.254.0 255.255.255.0 any eq netbios-dgm log informational interval 300 (hitcn t=0) 0x02a111af
access-list inside_access_in line 12 extended permit udp 172.31.254.0 255.255.255.0 any eq netbios-ns log informational interval 300 (hitcnt =0) 0x19244261
access-list inside_access_in line 13 extended permit tcp 172.31.254.0 255.255.255.0 any eq netbios-ssn log informational interval 300 (hitcn t=0) 0x0dbff051
access-list inside_access_in line 14 extended permit tcp 172.31.254.0 255.255.255.0 any eq 445 log informational interval 300 (hitcnt=0) 0x7 b798b0e
access-list inside_access_in line 15 remark CM000280 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:domain
access-list inside_access_in line 16 extended permit tcp object 172.31.254.2 any eq domain log informational interval 300 (hitcnt=0) 0x6c416 81b
access-list inside_access_in line 16 extended permit tcp host 172.31.254.2 any eq domain log informational interval 300 (hitcnt=0) 0x6c416 81b
access-list inside_access_in line 17 extended permit udp object 172.31.254.2 any eq domain log informational interval 300 (hitcnt=0) 0xc53bf 227
access-list inside_access_in line 17 extended permit udp host 172.31.254.2 any eq domain log informational interval 300 (hitcnt=0) 0xc53bf 227
access-list inside_access_in line 18 remark CM000220 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:catch_all
access-list inside_access_in line 19 extended permit ip object 172.31.254.2 any log informational interval 300 (hitcnt=0) 0xd063707c
access-list inside_access_in line 19 extended permit ip host 172.31.254.2 any log informational interval 300 (hitcnt=0) 0xd063707c
access-list inside_access_in line 20 remark CM0000086 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:SSH_internal
access-list inside_access_in line 21 extended permit tcp 172.31.254.0 255.255.255.0 interface inside eq ssh log informational interval 300 (hitcnt=0) 0x4951b794
access-list inside_access_in line 22 remark CM0000011 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:PortRange
access-list inside_access_in line 23 extended permit object TCPPortRange 172.31.254.0 255.255.255.0 host 192.168.20.91 log informational interval 300 (hitcnt=0) 0x441e6d68
access-list inside_access_in line 23 extended permit tcp 172.31.254.0 255.255.255.0 host 192.168.20.91 range ftp smtp log informational interval 300 (hitcnt=0) 0x441e6d68
access-list inside_access_in line 24 remark CM0000012 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:FTP
access-list inside_access_in line 25 extended permit tcp object inside_range range 1024 45000 host 192.168.20.91 eq ftp log informational interval 300 0xe848acd5
access-list inside_access_in line 25 extended permit tcp range 12.89.235.2 12.89.235.5 range 1024 45000 host 192.168.20.91 eq ftp log informational interval 300 (hitcnt=0) 0xe848acd5
access-list inside_access_in line 26 extended permit ip 192.168.20.0 255.255.255.0 any log informational interval 300 (hitcnt=0) 0xb6c1be37
access-list inside_access_in line 27 remark CM0000014 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:DropIP
access-list inside_access_in line 28 extended permit ip object windowsusageVM any log informational interval 300 (hitcnt=0) 0x22170368
access-list inside_access_in line 28 extended permit ip host 172.31.254.250 any log informational interval 300 (hitcnt=0) 0x22170368
access-list inside_access_in line 29 extended permit ip any object testCSM-object (hitcnt=0) 0xa3fcb334
access-list inside_access_in line 29 extended permit ip any host 255.255.255.255 (hitcnt=0) 0xa3fcb334
access-list inside_access_in line 30 extended permit ip 172.31.254.0 255.255.255.0 any log informational interval 300 (hitcnt=0) 0xe361b6ed
access-list inside_access_in line 31 remark CM0000065 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:IP
access-list inside_access_in line 32 extended permit ip host 172.31.254.2 any log informational interval 300 (hitcnt=0) 0xed7670e1
access-list inside_access_in line 33 remark CM0000658 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security
access-list inside_access_in line 34 extended permit tcp host 192.168.20.95 any eq www log informational interval 300 (hitcnt=0) 0x8d07d70b
There is a comment in the running config: (line 26)
access-list inside_access_in remark CM0000088 EXP:1/16/2014 OWN:IT_Security BZU:Network_Security JST:PortRange
This comment is missing in "show access-list". So in the access list, for all the lines after this comment, the line number is no longer correct. This causes problem when we try to use line number to insert a new rule.
Has anybody seen this problem before? Is this a known problem? I am glad to provide more information if needed.
Thanks in advance.
show version:
Cisco Adaptive Security Appliance Software Version 8.4(4)1
Device Manager Version 7.1(3)
Compiled on Thu 14-Jun-12 11:20 by builders
System image file is "disk0:/asa844-1-k8.bin"
Config file at boot was "startup-config"
fmciscoasa up 1 hour 56 mins
Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.06
Number of accelerators: 1Could be related to the following bug:
CSCtq12090: ACL remark line is missing when range object is configured in ACL
Fixed in 8.4(6), so update to a newer version and observe it again.
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni -
How to add access control to a WebService in Weblogic
Hello experts,
I developed a Web Service and I deployed it on Weblogic: it reads a SOAP request and, according to the input, it performs some actions.
Now we would need to implement an access control on it, we read some information in the documentation we find on google, but none of these was exhaustive: did anyone of you implemented already an access control policy?
And how did you do?
Thank youHello Arunkumar,
my JDev is 11.1.1.5.0.
I checked the documentation, but it's not clear for me in which of those scenarios we are: we have an Oracle Service Bus that needs to contact an application, but we don't want to grant a direct access to it.
So the bus is calling the web service that it's triggering the events on the application.
Everything works fine, but we need now to put at least an access control method, in order to avoid that a simple call from SoapUI may triggers the operations on our Web Service. -
FINE GRAINED ACCESS CONTROL(FGAC)를 위한 DBMS_RLS.ADD_POLICY의 VERSION별 특징
제품 : ORACLE SERVER
작성날짜 : 2005-11-24
FINE GRAINED ACCESS CONTROL(FGAC)를 위한 DBMS_RLS.ADD_POLICY의 VERSION별 특징
=======================================================================
PURPOSE
row leve의 security 및 context관리 방법인 FGAC에 대한 간단한 개념 및 사용방법은
<bul 23026>에 제시하였다.
이 문서에는 FGAC를 위한 dbms_rls package의 8i ~ 10g까지의 version별 특징을
정리하며, STATIC_POLICY와 POLCICY_TYPE parameter에 대해서는 예제를 이용하여
자세히 살펴보도록 한다.
Explanation & Examples
dbms_rls.add_policy를 사용할 때 일반적으로 주는 value값의 예제는 다음과 같다.
이중 대부분은 default값을 이용하여, 일반적으로는 앞의 5개의 parameter만
value를 주면 된다.
SQL> exec DBMS_RLS.ADD_POLICY ( -
> object_schema => 'SCOTT', -
> object_name => 'EMP', -
> policy_name => 'POL1', -
> function_schema => 'SYS', -
> policy_function => 'PREDICATE', -
> statement_types => 'SELECT', -
> static_policy => false, -
> policy_type => DBMS_RLS.DYNAMIC
> long_predicate => false);
1. FGAC의 version별 특징
(1) sec_relevant_cols/sec_relevant_cols_opt : 10G
위에 기술한 add_policy procedure의 parameter외에 10g에서 추가된
parameter로 다음 두 parameter가 존재한다.
이 parameter는 해당되는 column이 조회될때만 policy가 작동하게 하기 위한
것으로 metalink.oracle.com site에서 <Note 250795.1> 를 살펴보면 사용 방법
및 예제를 확인 가능하다.
- sec_relevant_cols
- sec_relevant_cols_opt
(2) long_predicate : 10G
default는 false이며, true로 지정하는 경우 predicate이 4000 bytes이상이
될 수 있다.
(3) statement_types : 10G부터 INDEX type추가
9i까지는 SELECT, INSERT, UPDATE, DELETE에 대해서는 FGAC를 적용할 수
있었으나, 10g부터는 INDEX type도 지정 가능하다.
index를 지정하는 경우, function-based index 생성을 제한할 수 있으며,
자세한 예제는 metalink.oracle.com site에서 <Note 315687.1>를 조회하여
확인할 수 있다.
(4) EXEMPT ACCESS POLICY 권한 : 9i
특정 user가 모든 fine-grained access control policy의 영향을 받지
않도록 하려면 exempt access policy권한을 grant하면 되며, 이것은 9i부터
소개되었다.
SQL> grant exempt access policy to scott;
와 같은 방식으로 권한을 부여하면 되며, 이에 대한 자세한 예제는
metalink.oracle.com site에서 <Note 174799.1>를 통해 확인 가능하다.
(5) synonym에 대한 policy설정 : 9.2
synonym에 대해서 VPD (Virtudal Private Database)에 대한 policy를 설정하는
것이 가능해 졌으며 이에 대해서는 metalink.oracle.com에서 <Note 174368.1>를
조회하여 자세한 방법 및 예제를 살펴볼 수 있다.
(6) static_policy : 8.1.7.4
static_policy paramter는 8i에는 없던 것으로 9i에서 도입되면서, 8.1.7.4에도
반영되었다. default값은 false이며, 8173까지는 항상 false인 형태로 동작한다.
즉, policy function이 매번 object를 access할때마다 실행된다.
8.1.7.4부터는 이 parameter를 true로 설정할 수 있는대, 이렇게 되면
해당 session에서 policy function이 한번 실행되고 그 function이 shared pool에
cache되어 있으면 재실행없이 그대로 사용된다.
10g부터는 (7)번에 설명하는 policy_type parameter가 추가되어,
이 parameter에 true로 지정하는 대신, static_type은 false로 두고,
policy_type을 dbms_rls.static 으로 지정하면,
9i와 8174에서 static_policy를 true로 한것과 같은 결과가 나타난다.
(7) policy_type: 10g
다음과 같이 5가지 value가 가능하며, 이 중 default는 dynamic이다.
- STATIC
policy fuction에 포함된 predicate이 runtime환경에 따라 다른 결과를 내지
않는 경우 사용하게 된다. 예를 들어 sysdate의해 다른 결과를 return하는
경우에는 사용하면 사용하면 문제가 될 수 있다.
static을 사용하는 경우 policy function은 한번 실행되어 SGA에 올라온 다음
이후 같은 session에서 같은 object를 사용시에는 재실행 없이 해당 predicate의
결과를 그대로 사용한다.
- SHARD_STATIC
STATIC과 같으나, 이 값은 다른 object에 대해서도 같은 predicate function이
사용되는 경우, 먼저 cache된 predicate을 찾아서 있으면 그 값을 이용한다.
STATIC의 경우는 다른 object 사이에서는 공유하지 않으며 같은 object에
대해서만 cache된 값을 사용한다.
- CONTEXT_SENSITIVE
한 session에서 context가 변경되면 그때 predicate를 재 실행시킨다.
WAS(web application server)를 사용하는 경우 connection pooling방법을
기본적으로 사용하는대, 이 경우 하나의 session을 여러 사용자가 이어서
교대로 사용하는 방식이 된다. 이 경우 middle tier단에서 context를 설정해
주면 context가 변경될때마다 predicate를 새로 실행시켜 변경된 sysdate나
session_user등의 값을 다시 계산하게 되는것이다.
jdbc에서 context설정에 관한 예제는 metalink.oracle.com에서
<Note 110604.1>에서 확인가능하다.
- SHARED_CONTEXT_SENSITIVE
context_sensitive와 동일하며, 단 shared_static과 마찬가지로 여러 object에
대해서 같은 predicate을 사용하는 경우 다른 object에 대한 같은 predicate이
cache되어 있는지를 먼저 살펴본다.
존재하면 session private application context가 변경되기 전까지 그 predicate의
결과를 그대로 사용한다.
- DYNAMIC
이 값이 default값이다. 즉, predicate function이나 시스템이나 환경에
영향을 받는다고 판단하여 statement가 실행될때마다 매번 predicate function을
재 실행하여 환경에 맞는 값을 return하여 준다.
아래에서 sysdate 값에 따라 다른 결과를 return하게 되어 있는
predicate을 이용한 예제를 통해 정확한 메카니즘을 확인한다.
2. static_policy 및 policy_type의 value에 따른 policy function의 작동예제
(a) STATIC_POLICY => TRUE and POLICY_TYPE => NULL
(1) 기존에 pol1 policy가 존재하는 경우 다음과 같이 drop시킨다.
SQL> exec DBMS_RLS.DROP_POLICY ('SCOTT', 'EMP','POL1');
(2) 다음과 같이 predicate function을 scott user로 만들어둔다.
SQL> create or replace function PREDICATE (obj_schema varchar2, obj_name varchar2)
2 return varchar2 is d_predicate varchar2(2000);
3 begin
4 if to_char(sysdate, 'HH24') >= '06' and to_char(sysdate, 'MI')<'05' then
5 d_predicate := 'ename = sys_context (''USERENV'' , ''SESSION'');
6 else d_predicate := 'sal>=3000';
7 end if;
8 return d_predicate;
9 end predicate;
10 /
(3) pol1을 새로 add시킨다.
SQL> exec DBMS_RLS.ADD_POLICY ( -
object_schema => 'SCOTT', -
object_name => 'EMP', -
policy_name => 'POL1', -
function_schema => 'SCOTT', -
policy_function => 'PREDICATE', -
statement_types => 'SELECT', -
static_policy => TRUE, -
policy_type => NULL);
(4) adams user에서 scott.emp를 조회해 본다.
단 다음과 같이 scott.emp에 대한 select권한을 king에게 주어야 한다.
SQL>grant select on emp to king;
SQL>!date
Thu Nov 24 14:01:13 EST 2005
SQL> connect king/king
SQL> select * from scott.emp;
EMPNO ENAME JOB MGR HIREDATE SAL COMM
DEPTNO
7839 KING PRESIDENT 17-NOV-81 5000
10
5분이후가 되어 predicate function의 if조건을 만족하지 않아도,
king user는 같은 값을 emp table에 대해서 return한다.
SQL>!date
Thu Nov 24 14:10:13 EST 2005
SQL> connect king/king
SQL> select * from scott.emp;
EMPNO ENAME JOB MGR HIREDATE SAL COMM
DEPTNO
7839 KING PRESIDENT 17-NOV-81 5000
10
(b) STATIC_POLICY => FALSE and POLICY_TYPE => DBMS_RLS.DYNAMIC
(1) 기존의 policy를 다음과 같이 drop시킨다.
SQL> exec DBMS_RLS.DROP_POLICY ('SCOTT', 'EMP','POL1');
(2) pol1을 새로 add시키는대 이대 static_policy와 policy_type을 다음과 같이
변경한다.
SQL> exec DBMS_RLS.ADD_POLICY ( -
object_schema => 'SCOTT', -
object_name => 'EMP', -
policy_name => 'POL1', -
function_schema => 'SCOTT', -
policy_function => 'PREDICATE', -
statement_types => 'SELECT', -
static_policy => flase, -
policy_type => dbms_rls.dynamic);
(3) king user에서 조회해본다.
predicate function은 위의 2-(a)에서 실행한 것을 그대로 사용한다.
즉 (a)를 실행하지 않은 경우, 조회전에 (a)-(2)번을 실행해야 한다.
SQL>!date
Thu Nov 24 15:01:13 EST 2005
SQL> connect king/king
SQL> select * from scott.emp;
EMPNO ENAME JOB MGR HIREDATE SAL COMM
DEPTNO
7839 KING PRESIDENT 17-NOV-81 5000
10
5분 이후가 되어 다시한번 king user에서 실행해본다.
SQL>!date
Thu Nov 24 15:10:13 EST 2005
SQL> select * from scott.emp;
EMPNO ENAME JOB MGR HIREDATE SAL COMM
DEPTNO
7788 SCOTT ANALYST 7566 19-APR-87 3000
20
7839 KING PRESIDENT 17-NOV-81 5000
10
7902 FORD ANALYST 7566 03-DEC-81 3000
20
RELATED DOCUMENTS
<Note 281970.1> 10g Enhancement on STATIC_POLICY with POLICY_TYPE Behaviors
in DBMS_RLS.ADD_POLICY Procedure
<Note 281829.1> Evolution of Fine Grain Access Control FGAC Feature From 8i
to 10gfirst you could use default column values, not a trigger, which is more expensive.
if your apps already assumes full access to table to get max id ( another RT ), this is bad. Current RLS can not really help if you can not change the apps because of this flaw logic ( you can store the maxid anywhere, why scanning the whole table to find it ) -
OSB - ALSB / WLST / Security / add entry with WLST in Access Control
Hello,
I try to reproduce with WLST script the input from the consol to declare user on Access Control proxy (security).
sbconsol->$Proxy Service->Security->General Confiruration->Access Control->Transport Access Control->Add Conditions
* First implementation without success with the com.bea.wli.sb.security.management.configuration.ServiceSecurityConfigurationMBean : accessControlSecurity1()
* Second try with the service definition of the proxy service but cannot parse with Xpath accessControl Security2()
any idee ???
test case :
prerequisit
create an ALSB domain 10.3 (admin one with username='weblogic' password='weblogic' url='t3://localhost:7001') and create a proxy service on the default project
conf/setEnv.cmd
@CLS
@echo ON
@set BEA_HOME=D:\PRODUCT\MIDDLEWARE\SOA\OSB_10.3
@set WL_HOME=%BEA_HOME%\wlserver_10.3
@set OSB_HOME=%BEA_HOME%\osb_10.3
@set SCRIPTING_HOME=E:\PROJETS\RECURANT\EDF\linky\WLST\WORKING\Security
@set OSB_LIB=%OSB_HOME%/lib/sb-kernel-api.jar;%BEA_HOME%/modules/com.bea.alsb.statistics_1.0.1.0.jar;%OSB_HOME%/lib/sb-kernel-resources.jar;%OSB_HOME%/lib/sb-kernel-common.jar;%OSB_HOME%/lib/sb-kernel-impl.jar;%OSB_HOME%\lib\sb-security.jar;%OSB_HOME%/modules/com.bea.common.configfwk_1.3.0.0.jar;%BEA_HOME%/modules/com.bea.common.configfwk_1.2.0.0.jar;%BEA_HOME%/modules/com.bea.common.configfwk_1.2.1.0.jar;%OSB_HOME%/lib/modules/com.bea.alsb.resources.archive.jar;
@set TOOL_LIB=%SCRIPTING_HOME%\lib\log4j-1.2.15.jar;%SCRIPTING_HOME%\lib\jsch-0.1.43.jar;%SCRIPTING_HOME%\lib\db2jcc.jar
@set CLASSPATH=%OSB_LIB%;%TOOL_LIB%;%CLASSPATH%
@set CLASSPATH=%SCRIPTING_HOME%\lib\db2jcc.jar;%TOOL_LIB%;%CLASSPATH%
@set MODULE_LIB=%SCRIPTING_HOME%\lib
@call %WL_HOME%\server\bin\setWLSEnv.cmd > nul 2<&1
launch.cmd
@CLS
@echo OFF
@SETLOCAL
@call "conf\setEnv.cmd" > nul 2<&1
set PWD=%~dp0
%JAVA_HOME%\bin\java -Dmodule.lib=%MODULE_LIB% weblogic.WLST -skipWLSModuleScanning lib/security.py
lib/security.py
from com.bea.wli.monitoring import StatisticType
from java.util import HashMap
from java.util import HashSet
from java.util import ArrayList
from java.util import Collections
from java.io import FileInputStream
from java.io import FileOutputStream
from java.lang import String
from java.lang import Boolean
from com.bea.wli.sb.util import EnvValueTypes
from com.bea.wli.config.env import EnvValueQuery;
from com.bea.wli.config import Ref
from com.bea.wli.config.customization import Customization
from com.bea.wli.config.customization import EnvValueCustomization
from com.bea.wli.config.customization import FindAndReplaceCustomization
from com.bea.wli.sb.management.configuration import SessionManagementMBean
from com.bea.wli.sb.management.configuration import ALSBConfigurationMBean
from com.bea.wli.sb.management.query import BusinessServiceQuery
from com.bea.wli.sb.management.query import ProxyServiceQuery
from com.bea.wli.sb.management.configuration import ServiceConfigurationMBean
import os
# before, create an ALSB domain 10.3 with a proxy service in the default project and add an Acces Control Policy in the consol
# sbconsol->Project Explorer->default->${proxy service}->Security->Access Control->Create Session->Add Conditions->User->USR_1->Add
# when we try to modify the Acces Control Policy of the proxy service with the ServiceSecurityConfigurationMBean
def accessControlSecurity1( domain_name ):
# connection
print "\n\n\n***********************************************************************************************"
connect( 'weblogic', 'weblogic', 't3://localhost:7001')
domainRuntime()
# create a session
sessionName = String("SessionScript"+Long(System.currentTimeMillis()).toString())
SessionMBean = findService( SessionManagementMBean.NAME ,SessionManagementMBean.TYPE)
SessionMBean.createSession(sessionName)
# get the ServiceSecurityConfigurationMBean
serviceSecurityConfigurationMBean = findService(String("ServiceSecurityConfiguration.").concat(sessionName), "com.bea.wli.sb.security.management.configuration.ServiceSecurityConfigurationMBean")
# get the XACMLAuthorizer
working_directory=pwd()
serverConfig()
xacmlAuthorizer = cd('/SecurityConfiguration/%s/Realms/myrealm/Authorizers/XACMLAuthorizer' % domain_name )
cd(working_directory)
domainRuntime()
# get service ref
ConfigurationMBean = findService(String("ALSBConfiguration.").concat(sessionName), "com.bea.wli.sb.management.configuration.ALSBConfigurationMBean")
bsQuery = ProxyServiceQuery()
bsQuery.setPath("default/*")
refs = ConfigurationMBean.getRefs(bsQuery)
for ref in refs:
print 'ref=%s'%ref
# use the security Mbean to add : USER_A,USER_B,USER_C to the policy
policyHolder = serviceSecurityConfigurationMBean.newAccessControlPolicyHolderInstance(xacmlAuthorizer)
policyHolder.setPolicyExpression("Usr(USER_A,USER_B,USER_C)")
policyScope = serviceSecurityConfigurationMBean.newDefaultMessagePolicyScope(ref)
serviceSecurityConfigurationMBean.setAccessControlPolicy(policyScope,policyHolder)
# print the service definition
servConfMBean = findService( "%s.%s" % (ServiceConfigurationMBean.NAME, sessionName), ServiceConfigurationMBean.TYPE)
serviceDefinition = servConfMBean.getServiceDefinition(ref)
print serviceDefinition
# we can see the security entry in the service definition has follow
# <xml-fragment xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env">
# <ser:coreEntry isProxy="true" isEnabled="true" isAutoPublish="false">
# <ser:description/>
# <ser:security>
# <con:access-control-policies xmlns:con="http://www.bea.com/wli/sb/services/security/config">
# <con:message-level-policies>
# <con1:default-policy xsi:type="con:ProviderPolicyContainerType" xmlns:con="http://www.bea.com/wli/sb/security/accesscontrol/config" xmlns:con1="http://www.bea.com/wli/sb/services/security/config">
# <con:policy provider-id="XACMLAuthorizer">
# <con:policy-expression>Usr(USER_A,USER_B,USER_C)</con:policy-expression>
# </con:policy>
# </con1:default-policy>
# </con:message-level-policies>
# </con:access-control-policies>
# </ser:security>
# but when we commit
SessionMBean.activateSession(sessionName, "description for session activation")
# we got the following exception
# Unexpected error: com.bea.wli.config.session.SessionConflictException
# No stack trace available.
# Problem invoking WLST - Traceback (innermost last):
# File "E:\PROJETS\RECURANT\EDF\linky\WLST\WORKING\Security\lib\security.py", line 246, in ?
# File "E:\PROJETS\RECURANT\EDF\linky\WLST\WORKING\Security\lib\security.py", line 105, in accessControlSecurity1
# com.bea.wli.config.session.SessionConflictException: Conflicts for session SessionScript1363339726764
# [Non-Critical] Concurrent Modification Conflicts
# NONE
# [Critical] Resources with validation errors
# 1 - ProxyService test/PS_TEST_bis CannotCommit
# + CannotCommit [OSB Security:386836]Unnecessary proxy wide message access control policy found for service "test/PS_TEST_bis". Hint: The service is neither an active security
# intermediary nor has custom authentication enabled. ServiceDiagnosticLocation[SECURITY_TAB]:DiagnosticLocation:<con:message-level-policies xmlns:ser="http://www.bea.com/wli/sb/services" xml
# ns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env" xmlns:con="http://www.bea.com/wli/sb/services/security/config">
# <con1:default-policy xsi:type="con:ProviderPolicyContainerType" xmlns:con="http://www.bea.com/wli/sb/security/accesscontrol/config" xmlns:con1="http://www.bea.com/wli/sb/services/security/
# config">
# <con:policy provider-id="XACMLAuthorizer">
# <con:policy-expression>Usr(USER_A,USER_B,USER_C)</con:policy-expression>
# </con:policy>
# </con1:default-policy>
# </con:message-level-policies>
# [Info] Informational messages
# NONE
# at com.bea.wli.config.session.SessionManager.commitSessionUnlocked(SessionManager.java:358)
# at com.bea.wli.config.session.SessionManager.commitSession(SessionManager.java:339)
# at com.bea.wli.config.session.SessionManager.commitSession(SessionManager.java:297)
# at com.bea.wli.config.session.SessionManager.commitSession(SessionManager.java:306)
disconnect()
# when we try to modify the Acces Control Policy of the proxy service whith the service XML definition
def accessControlSecurity2( domain_name ):
# connection
print "\n\n\n***********************************************************************************************"
connect( 'weblogic', 'weblogic', 't3://localhost:7001')
domainRuntime()
# create a session
sessionName = String("SessionScript"+Long(System.currentTimeMillis()).toString())
SessionMBean = findService( SessionManagementMBean.NAME ,SessionManagementMBean.TYPE)
SessionMBean.createSession(sessionName)
# get service ref
ConfigurationMBean = findService(String("ALSBConfiguration.").concat(sessionName), "com.bea.wli.sb.management.configuration.ALSBConfigurationMBean")
bsQuery = ProxyServiceQuery()
bsQuery.setPath("default/*")
refs = ConfigurationMBean.getRefs(bsQuery)
for ref in refs:
print 'ref=%s'%ref
servConfMBean = findService( "%s.%s" % (ServiceConfigurationMBean.NAME, sessionName), ServiceConfigurationMBean.TYPE)
serviceDefinition = servConfMBean.getServiceDefinition(ref)
# parsing the proxy definition
nsSer = "declare namespace ser='http://www.bea.com/wli/sb/services'"
nsXsi = "declare namespace xsi='http://www.w3.org/2001/XMLSchema-instance'"
nsTran = "declare namespace tran='http://www.bea.com/wli/sb/transports'"
nsEnv = "declare namespace env='http://www.bea.com/wli/config/env'"
nsCon = "declare namespace con='http://www.bea.com/wli/sb/services/security/config'"
nsCon1 = "declare namespace con1='http://www.bea.com/wli/sb/services/security/config'"
# when we try to parse the following Xpath Expression, it' working but not sufficent to access the <con:policy-expression> element
confPath = "ser:coreEntry/ser:security/con:access-control-policies/con1:transport-level-policy"
confElem = serviceDefinition.selectPath(nsSer + nsXsi + nsTran + nsEnv + nsCon + nsCon1 + confPath )
print "WORKING{%s}" % confElem
# get the result
# <xml-fragment xsi:type="con:ProviderPolicyContainerType" xmlns:con="http://www.bea.com/wli/sb/security/accesscontrol/config" xmlns:con1="http://www.bea.com/wli/sb/services/security/config" xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env">
# <con:policy provider-id="XACMLAuthorizer">
# <con:policy-expression>Usr(USER_1,USER_2,USER_3)</con:policy-expression>
# </con:policy>
# </xml-fragment>
# and when we try to acces the <con:policy> element whith the following Xpath expression we got an empty result
confPath = "ser:coreEntry/ser:security/con:access-control-policies/con1:transport-level-policy/con:policy"
confElem = serviceDefinition.selectPath(nsSer + nsXsi + nsTran + nsEnv + nsCon + nsCon1 + confPath )
print "DON'T WORKING{%s}" % confElem
# get empty result
# array([], org.apache.xmlbeans.XmlObject)
# want to modify the value like this on the <con:policy-expression> but cannot reach it ...
#confValue="Usr(USER_A,USER_B,USER_C)"
#confElem.setStringValue(confValue)
# commit
SessionMBean.activateSession(sessionName, "description for session activation")
disconnect
# print the service definition
def printServiceDefinition( domain_name ):
# connection
connect( 'weblogic', 'weblogic', 't3://localhost:7001')
domainRuntime()
# create a session
sessionName = String("SessionScript"+Long(System.currentTimeMillis()).toString())
SessionMBean = findService( SessionManagementMBean.NAME ,SessionManagementMBean.TYPE)
SessionMBean.createSession(sessionName)
# get service ref
ConfigurationMBean = findService(String("ALSBConfiguration.").concat(sessionName), "com.bea.wli.sb.management.configuration.ALSBConfigurationMBean")
bsQuery = ProxyServiceQuery()
bsQuery.setPath("default/*")
refs = ConfigurationMBean.getRefs(bsQuery)
for ref in refs:
print 'ref=%s'%ref
servConfMBean = findService( "%s.%s" % (ServiceConfigurationMBean.NAME, sessionName), ServiceConfigurationMBean.TYPE)
serviceDefinition = servConfMBean.getServiceDefinition(ref)
servConfMBean = findService( "%s.%s" % (ServiceConfigurationMBean.NAME, sessionName), ServiceConfigurationMBean.TYPE)
serviceDefinition = servConfMBean.getServiceDefinition(ref)
print serviceDefinition
# commit
SessionMBean.activateSession(sessionName, "description for session activation")
disconnect
#accessControlSecurity1('cluster_domain')
accessControlSecurity2('cluster_domain')Hello,
I try to reproduce with WLST script the input from the consol to declare user on Access Control proxy (security).
sbconsol->$Proxy Service->Security->General Confiruration->Access Control->Transport Access Control->Add Conditions
* First implementation without success with the com.bea.wli.sb.security.management.configuration.ServiceSecurityConfigurationMBean : accessControlSecurity1()
* Second try with the service definition of the proxy service but cannot parse with Xpath accessControl Security2()
any idee ???
test case :
prerequisit
create an ALSB domain 10.3 (admin one with username='weblogic' password='weblogic' url='t3://localhost:7001') and create a proxy service on the default project
conf/setEnv.cmd
@CLS
@echo ON
@set BEA_HOME=D:\PRODUCT\MIDDLEWARE\SOA\OSB_10.3
@set WL_HOME=%BEA_HOME%\wlserver_10.3
@set OSB_HOME=%BEA_HOME%\osb_10.3
@set SCRIPTING_HOME=E:\PROJETS\RECURANT\EDF\linky\WLST\WORKING\Security
@set OSB_LIB=%OSB_HOME%/lib/sb-kernel-api.jar;%BEA_HOME%/modules/com.bea.alsb.statistics_1.0.1.0.jar;%OSB_HOME%/lib/sb-kernel-resources.jar;%OSB_HOME%/lib/sb-kernel-common.jar;%OSB_HOME%/lib/sb-kernel-impl.jar;%OSB_HOME%\lib\sb-security.jar;%OSB_HOME%/modules/com.bea.common.configfwk_1.3.0.0.jar;%BEA_HOME%/modules/com.bea.common.configfwk_1.2.0.0.jar;%BEA_HOME%/modules/com.bea.common.configfwk_1.2.1.0.jar;%OSB_HOME%/lib/modules/com.bea.alsb.resources.archive.jar;
@set TOOL_LIB=%SCRIPTING_HOME%\lib\log4j-1.2.15.jar;%SCRIPTING_HOME%\lib\jsch-0.1.43.jar;%SCRIPTING_HOME%\lib\db2jcc.jar
@set CLASSPATH=%OSB_LIB%;%TOOL_LIB%;%CLASSPATH%
@set CLASSPATH=%SCRIPTING_HOME%\lib\db2jcc.jar;%TOOL_LIB%;%CLASSPATH%
@set MODULE_LIB=%SCRIPTING_HOME%\lib
@call %WL_HOME%\server\bin\setWLSEnv.cmd > nul 2<&1
launch.cmd
@CLS
@echo OFF
@SETLOCAL
@call "conf\setEnv.cmd" > nul 2<&1
set PWD=%~dp0
%JAVA_HOME%\bin\java -Dmodule.lib=%MODULE_LIB% weblogic.WLST -skipWLSModuleScanning lib/security.py
lib/security.py
from com.bea.wli.monitoring import StatisticType
from java.util import HashMap
from java.util import HashSet
from java.util import ArrayList
from java.util import Collections
from java.io import FileInputStream
from java.io import FileOutputStream
from java.lang import String
from java.lang import Boolean
from com.bea.wli.sb.util import EnvValueTypes
from com.bea.wli.config.env import EnvValueQuery;
from com.bea.wli.config import Ref
from com.bea.wli.config.customization import Customization
from com.bea.wli.config.customization import EnvValueCustomization
from com.bea.wli.config.customization import FindAndReplaceCustomization
from com.bea.wli.sb.management.configuration import SessionManagementMBean
from com.bea.wli.sb.management.configuration import ALSBConfigurationMBean
from com.bea.wli.sb.management.query import BusinessServiceQuery
from com.bea.wli.sb.management.query import ProxyServiceQuery
from com.bea.wli.sb.management.configuration import ServiceConfigurationMBean
import os
# before, create an ALSB domain 10.3 with a proxy service in the default project and add an Acces Control Policy in the consol
# sbconsol->Project Explorer->default->${proxy service}->Security->Access Control->Create Session->Add Conditions->User->USR_1->Add
# when we try to modify the Acces Control Policy of the proxy service with the ServiceSecurityConfigurationMBean
def accessControlSecurity1( domain_name ):
# connection
print "\n\n\n***********************************************************************************************"
connect( 'weblogic', 'weblogic', 't3://localhost:7001')
domainRuntime()
# create a session
sessionName = String("SessionScript"+Long(System.currentTimeMillis()).toString())
SessionMBean = findService( SessionManagementMBean.NAME ,SessionManagementMBean.TYPE)
SessionMBean.createSession(sessionName)
# get the ServiceSecurityConfigurationMBean
serviceSecurityConfigurationMBean = findService(String("ServiceSecurityConfiguration.").concat(sessionName), "com.bea.wli.sb.security.management.configuration.ServiceSecurityConfigurationMBean")
# get the XACMLAuthorizer
working_directory=pwd()
serverConfig()
xacmlAuthorizer = cd('/SecurityConfiguration/%s/Realms/myrealm/Authorizers/XACMLAuthorizer' % domain_name )
cd(working_directory)
domainRuntime()
# get service ref
ConfigurationMBean = findService(String("ALSBConfiguration.").concat(sessionName), "com.bea.wli.sb.management.configuration.ALSBConfigurationMBean")
bsQuery = ProxyServiceQuery()
bsQuery.setPath("default/*")
refs = ConfigurationMBean.getRefs(bsQuery)
for ref in refs:
print 'ref=%s'%ref
# use the security Mbean to add : USER_A,USER_B,USER_C to the policy
policyHolder = serviceSecurityConfigurationMBean.newAccessControlPolicyHolderInstance(xacmlAuthorizer)
policyHolder.setPolicyExpression("Usr(USER_A,USER_B,USER_C)")
policyScope = serviceSecurityConfigurationMBean.newDefaultMessagePolicyScope(ref)
serviceSecurityConfigurationMBean.setAccessControlPolicy(policyScope,policyHolder)
# print the service definition
servConfMBean = findService( "%s.%s" % (ServiceConfigurationMBean.NAME, sessionName), ServiceConfigurationMBean.TYPE)
serviceDefinition = servConfMBean.getServiceDefinition(ref)
print serviceDefinition
# we can see the security entry in the service definition has follow
# <xml-fragment xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env">
# <ser:coreEntry isProxy="true" isEnabled="true" isAutoPublish="false">
# <ser:description/>
# <ser:security>
# <con:access-control-policies xmlns:con="http://www.bea.com/wli/sb/services/security/config">
# <con:message-level-policies>
# <con1:default-policy xsi:type="con:ProviderPolicyContainerType" xmlns:con="http://www.bea.com/wli/sb/security/accesscontrol/config" xmlns:con1="http://www.bea.com/wli/sb/services/security/config">
# <con:policy provider-id="XACMLAuthorizer">
# <con:policy-expression>Usr(USER_A,USER_B,USER_C)</con:policy-expression>
# </con:policy>
# </con1:default-policy>
# </con:message-level-policies>
# </con:access-control-policies>
# </ser:security>
# but when we commit
SessionMBean.activateSession(sessionName, "description for session activation")
# we got the following exception
# Unexpected error: com.bea.wli.config.session.SessionConflictException
# No stack trace available.
# Problem invoking WLST - Traceback (innermost last):
# File "E:\PROJETS\RECURANT\EDF\linky\WLST\WORKING\Security\lib\security.py", line 246, in ?
# File "E:\PROJETS\RECURANT\EDF\linky\WLST\WORKING\Security\lib\security.py", line 105, in accessControlSecurity1
# com.bea.wli.config.session.SessionConflictException: Conflicts for session SessionScript1363339726764
# [Non-Critical] Concurrent Modification Conflicts
# NONE
# [Critical] Resources with validation errors
# 1 - ProxyService test/PS_TEST_bis CannotCommit
# + CannotCommit [OSB Security:386836]Unnecessary proxy wide message access control policy found for service "test/PS_TEST_bis". Hint: The service is neither an active security
# intermediary nor has custom authentication enabled. ServiceDiagnosticLocation[SECURITY_TAB]:DiagnosticLocation:<con:message-level-policies xmlns:ser="http://www.bea.com/wli/sb/services" xml
# ns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env" xmlns:con="http://www.bea.com/wli/sb/services/security/config">
# <con1:default-policy xsi:type="con:ProviderPolicyContainerType" xmlns:con="http://www.bea.com/wli/sb/security/accesscontrol/config" xmlns:con1="http://www.bea.com/wli/sb/services/security/
# config">
# <con:policy provider-id="XACMLAuthorizer">
# <con:policy-expression>Usr(USER_A,USER_B,USER_C)</con:policy-expression>
# </con:policy>
# </con1:default-policy>
# </con:message-level-policies>
# [Info] Informational messages
# NONE
# at com.bea.wli.config.session.SessionManager.commitSessionUnlocked(SessionManager.java:358)
# at com.bea.wli.config.session.SessionManager.commitSession(SessionManager.java:339)
# at com.bea.wli.config.session.SessionManager.commitSession(SessionManager.java:297)
# at com.bea.wli.config.session.SessionManager.commitSession(SessionManager.java:306)
disconnect()
# when we try to modify the Acces Control Policy of the proxy service whith the service XML definition
def accessControlSecurity2( domain_name ):
# connection
print "\n\n\n***********************************************************************************************"
connect( 'weblogic', 'weblogic', 't3://localhost:7001')
domainRuntime()
# create a session
sessionName = String("SessionScript"+Long(System.currentTimeMillis()).toString())
SessionMBean = findService( SessionManagementMBean.NAME ,SessionManagementMBean.TYPE)
SessionMBean.createSession(sessionName)
# get service ref
ConfigurationMBean = findService(String("ALSBConfiguration.").concat(sessionName), "com.bea.wli.sb.management.configuration.ALSBConfigurationMBean")
bsQuery = ProxyServiceQuery()
bsQuery.setPath("default/*")
refs = ConfigurationMBean.getRefs(bsQuery)
for ref in refs:
print 'ref=%s'%ref
servConfMBean = findService( "%s.%s" % (ServiceConfigurationMBean.NAME, sessionName), ServiceConfigurationMBean.TYPE)
serviceDefinition = servConfMBean.getServiceDefinition(ref)
# parsing the proxy definition
nsSer = "declare namespace ser='http://www.bea.com/wli/sb/services'"
nsXsi = "declare namespace xsi='http://www.w3.org/2001/XMLSchema-instance'"
nsTran = "declare namespace tran='http://www.bea.com/wli/sb/transports'"
nsEnv = "declare namespace env='http://www.bea.com/wli/config/env'"
nsCon = "declare namespace con='http://www.bea.com/wli/sb/services/security/config'"
nsCon1 = "declare namespace con1='http://www.bea.com/wli/sb/services/security/config'"
# when we try to parse the following Xpath Expression, it' working but not sufficent to access the <con:policy-expression> element
confPath = "ser:coreEntry/ser:security/con:access-control-policies/con1:transport-level-policy"
confElem = serviceDefinition.selectPath(nsSer + nsXsi + nsTran + nsEnv + nsCon + nsCon1 + confPath )
print "WORKING{%s}" % confElem
# get the result
# <xml-fragment xsi:type="con:ProviderPolicyContainerType" xmlns:con="http://www.bea.com/wli/sb/security/accesscontrol/config" xmlns:con1="http://www.bea.com/wli/sb/services/security/config" xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env">
# <con:policy provider-id="XACMLAuthorizer">
# <con:policy-expression>Usr(USER_1,USER_2,USER_3)</con:policy-expression>
# </con:policy>
# </xml-fragment>
# and when we try to acces the <con:policy> element whith the following Xpath expression we got an empty result
confPath = "ser:coreEntry/ser:security/con:access-control-policies/con1:transport-level-policy/con:policy"
confElem = serviceDefinition.selectPath(nsSer + nsXsi + nsTran + nsEnv + nsCon + nsCon1 + confPath )
print "DON'T WORKING{%s}" % confElem
# get empty result
# array([], org.apache.xmlbeans.XmlObject)
# want to modify the value like this on the <con:policy-expression> but cannot reach it ...
#confValue="Usr(USER_A,USER_B,USER_C)"
#confElem.setStringValue(confValue)
# commit
SessionMBean.activateSession(sessionName, "description for session activation")
disconnect
# print the service definition
def printServiceDefinition( domain_name ):
# connection
connect( 'weblogic', 'weblogic', 't3://localhost:7001')
domainRuntime()
# create a session
sessionName = String("SessionScript"+Long(System.currentTimeMillis()).toString())
SessionMBean = findService( SessionManagementMBean.NAME ,SessionManagementMBean.TYPE)
SessionMBean.createSession(sessionName)
# get service ref
ConfigurationMBean = findService(String("ALSBConfiguration.").concat(sessionName), "com.bea.wli.sb.management.configuration.ALSBConfigurationMBean")
bsQuery = ProxyServiceQuery()
bsQuery.setPath("default/*")
refs = ConfigurationMBean.getRefs(bsQuery)
for ref in refs:
print 'ref=%s'%ref
servConfMBean = findService( "%s.%s" % (ServiceConfigurationMBean.NAME, sessionName), ServiceConfigurationMBean.TYPE)
serviceDefinition = servConfMBean.getServiceDefinition(ref)
servConfMBean = findService( "%s.%s" % (ServiceConfigurationMBean.NAME, sessionName), ServiceConfigurationMBean.TYPE)
serviceDefinition = servConfMBean.getServiceDefinition(ref)
print serviceDefinition
# commit
SessionMBean.activateSession(sessionName, "description for session activation")
disconnect
#accessControlSecurity1('cluster_domain')
accessControlSecurity2('cluster_domain') -
I need helping configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.
I have attempted to configure rdp access but it does not seem to be working for me Could I please ask someone to help me modify my current configuration to allow this? Please do step by step as I could use all the help I could get.
I need to allow the following IP addresses to have RDP access to my server:
66.237.238.193-66.237.238.222
69.195.249.177-69.195.249.190
69.65.80.240-69.65.80.249
My external WAN server info is - 99.89.69.333
The internal IP address of my server is - 192.168.6.2
The other server shows up as 99.89.69.334 but is working fine.
I already added one server for Static route and RDP but when I try to put in same commands it doesnt allow me to for this new one. Please take a look at my configuration file and give me the commands i need in order to put this through. Also please tell me if there are any bad/conflicting entries.
THE FOLLOWING IS MY CONFIGURATION FILE
Also I have modified IP information so that its not the ACTUAL ip info for my server/network etc... lol for security reasons of course
Also the bolded lines are the modifications I made but that arent working.
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password DowJbZ7jrm5Nkm5B encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.6.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 99.89.69.233 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group network EMRMC
network-object 10.1.2.0 255.255.255.0
network-object 192.168.10.0 255.255.255.0
network-object 192.168.11.0 255.255.255.0
network-object 172.16.0.0 255.255.0.0
network-object 192.168.9.0 255.255.255.0
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service GMED tcp
description GMED
port-object eq 3390
object-group service MarsAccess tcp
description MarsAccess
port-object range pcanywhere-data 5632
object-group service MarsFTP tcp
description MarsFTP
port-object range ftp-data ftp
object-group service MarsSupportAppls tcp
description MarsSupportAppls
port-object eq 1972
object-group service MarsUpdatePort tcp
description MarsUpdatePort
port-object eq 7835
object-group service NM1503 tcp
description NM1503
port-object eq 1503
object-group service NM1720 tcp
description NM1720
port-object eq h323
object-group service NM1731 tcp
description NM1731
port-object eq 1731
object-group service NM389 tcp
description NM389
port-object eq ldap
object-group service NM522 tcp
description NM522
port-object eq 522
object-group service SSL tcp
description SSL
port-object eq https
object-group service rdp tcp
port-object eq 3389
access-list outside_1_cryptomap extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 192.168.0.0 255.255.0.0
access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-data
access-list outside_access_in extended permit udp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-status
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group RDP
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ftp
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ldap
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq h323
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq telnet
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq www
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group SSL
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM522
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM1731
access-list outside_access_in extended permit tcp 173.197.144.48 255.255.255.248 host 99.89.69.334 object-group RDP
access-list outside_access_in extended permit tcp any interface outside eq 3389
access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333
access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333 object-group rdp
access-list outside_access_in extended permit tcp any host 99.89.69.333 object-group rdp
access-list out_in extended permit tcp any host 192.168.6.2 eq 3389
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp 99.89.69.334 3389 192.168.6.1 3389 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 99.89.69.338 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable
http 192.168.6.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer 68.156.148.5
crypto map outside_map 1 set transform-set ESP-3DES-MD5
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 1
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
tunnel-group 68.156.148.5 type ipsec-l2l
tunnel-group 68.156.148.5 ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:f47dfb2cf91833f0366ff572eafefb1d
: end
ciscoasa(config-network)#Unclear what did not work. In your original post you include said some commands were added but don't work:
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
and later you state you add another command that gets an error:
static (inside,outside) tcp 99.89.69.333 3389 192.168.6.2 3389 netmask 255.255.255.255
You also stated that 99.89.69.333 (actually 99.89.69.233, guessing from the rest of your config and other posts) is your WAN IP address.
The first static statement matches Cisco's documentation, which states that a static statement must use the 'interface' directive when you are trying to do static PAT utilizing the IP address of the interface. Since 99.89.69.333 is the assigned IP address of your WAN interface, that may explain why the second statement fails.
Any reason why you are using static PAT (including the port number 3389) instead of just skipping that directive? Static PAT usually makes sense when you need to change the TCP port number. In your example, you are not changing the TCP port 3389. -
Cisco ASA 5505 L2TP VPN cannot access internal network
Hi,
I'm trying to configure Cisco L2TP VPN to my office. After successful connection I cannot access to internal network.
Can you jhelp me to find out the issue?
I have Cisco ASA:
inside network - 192.168.1.0
VPN network - 192.168.168.0
I have router 192.168.1.2 and I cannot ping or get access to this router.
Here is my config:
ASA Version 8.4(3)
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 198.X.X.A 255.255.255.248
ftp mode passive
same-security-traffic permit intra-interface
object network net-all
subnet 0.0.0.0 0.0.0.0
object network vpn_local
subnet 192.168.168.0 255.255.255.0
object network inside_nw
subnet 192.168.1.0 255.255.255.0
access-list outside_access_in extended permit icmp any any echo-reply
access-list outside_access_in extended deny ip any any log
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool sales_addresses 192.168.168.1-192.168.168.254
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source dynamic net-all interface
nat (inside,outside) source static inside_nw inside_nw destination static vpn_local vpn_local
nat (outside,inside) source static vpn_local vpn_local destination static inside_nw inside_nw route-lookup
object network vpn_local
nat (outside,outside) dynamic interface
object network inside_nw
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 198.X.X.B 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication enable console LOCAL
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set my-transform-set-ikev1 esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set my-transform-set-ikev1 mode transport
crypto dynamic-map dyno 10 set ikev1 transform-set my-transform-set-ikev1
crypto map vpn 20 ipsec-isakmp dynamic dyno
crypto map vpn interface outside
crypto isakmp nat-traversal 3600
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh timeout 30
console timeout 0
management-access inside
dhcpd address 192.168.1.5-192.168.1.132 inside
dhcpd dns 75.75.75.75 76.76.76.76 interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy sales_policy internal
group-policy sales_policy attributes
dns-server value 75.75.75.75 76.76.76.76
vpn-tunnel-protocol l2tp-ipsec
username ----------
username ----------
tunnel-group DefaultRAGroup general-attributes
address-pool sales_addresses
default-group-policy sales_policy
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:5d1fc9409c87ecdc1e06f06980de6c13
: end
Thanks for your help.You have to test it with "real" traffic to 192.168.1.2 and if you use ping, you have to add icmp-inspection:
policy-map global_policy
class inspection_default
inspect icmp
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni -
Cisco ASA 5505 VPN help for local lan access.
Hi all,
I am very new to Cisco systems. Recently I was tasked to enable local lan access for one of my server. The problem is this. I have this server with 2 interfaces. One interface to my FTP server(192.168.2.3) and the other to the Cisco ASA(192.168.1.1). Whenever I connect the server to Cisco Anyconnect VPN, I am unable to access the FTP server anymore.
I googled and found out that the problem is because the metric level is 1 for Ciscoanyconnect network interface which causes all traffic to go through the Cisco VPN Interface. Another problem is I can't change the metric of the Cisco VPN Interface as whenever I reconnect to the VPN, the metric resets back to 1 again. I tried to follow some guides to configure split tunnel but my traffic is still going through the VPN connection.
Anyone can tell me what I am missing here? Sorry I am very new to Cisco systems. Spent about 5 days troubleshooting and I feel I am getting it soon. Anyone can guide me what else I am supposed to do?
What I did> Configuration>> Remote access VPN>> Network Client Access>> Group Policies>> Advanced>> Split Tunneling>> Uncheck Inherit and select "Exclude Network List below.>> Uncheck Network List and select Manage, Add 192.168.2.0/24 to permit.
Really appreciate if anyone can tell me what else I can do to ensure my server has access the my FTP Server after connecting to the VPN.
Thanks all!
Wen QiHi,
Try adding the following configuration
policy-map global_policy
class inspection_default
inspect pptp
And then try again.
I'm not 100% would you need to perhaps allow GRE through the firewall even after that. (Protocol 47)
- Jouni -
Remote Access VPN on Cisco ASA Problem
Hi, i configured Remote access VPN on Cisco ASA 8.x as per below configuration.
Problem is that my internet has stopped working, and default route is just showing stars.
i can ping internal server 10.110.10.150 fine , which i allowed on VPN ACL, but my other traffic not going to regular internet on my laptop,
what additional required to force my internet to go to regular internet instead of getting encrypted?
Also attaching output of route print at the point when VPN is connected.
ip local pool RA_VPN_POOL 10.1.200.100-10.1.200.150 mask 255.255.255.0
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto dynamic-map RA_VPN 65535 set transform-set ESP-AES-128-SHA
crypto dynamic-map RA_VPN 65535 set security-association lifetime seconds 28800
crypto dynamic-map RA_VPN 65535 set security-association lifetime kilobytes 4608000
crypto map VPN_MAP 65535 ipsec-isakmp dynamic RA_VPN
crypto map VPN_MAP interface outside
isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
tunnel-group ITT_RA type remote-access
tunnel-group ITT_RA general-attributes
address-pool RA_VPN_POOL
default-group-policy RA_VPN_GP
tunnel-group ITT_RA ipsec-attributes
pre-shared-key <group key>
group-policy RA_VPN_GP internal
group-policy RA_VPN_GP attributes
dns-server value 10.0.0.1 10.0.0.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Split_Tunnel_List
default-domain value mydomain.com
address-pools value RA_VPN_POOL
access-list Split_Tunnel_List extended permit ip host 10.110.10.150 10.1.200.0 255.255.255.0
access-list nonattest extended permit ip host 10.110.10.150 10.1.200.0 255.255.255.0
nat (inside) 0 access-list nonattest
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.111.36.1 10.111.36.9 276
0.0.0.0 0.0.0.0 On-link 10.1.200.100 20
10.1.200.0 255.255.255.0 On-link 10.1.200.100 276
10.1.200.100 255.255.255.255 On-link 10.1.200.100 276
10.1.200.255 255.255.255.255 On-link 10.1.200.100 276
10.110.10.150 255.255.255.255 10.1.200.1 10.1.200.100 100
10.111.36.0 255.255.255.0 On-link 10.111.36.9 276Hi, i configured Remote access VPN on Cisco ASA 8.x as per below configuration.
Problem is that my internet has stopped working, and default route is just showing stars.
i can ping internal server 10.110.10.150 fine , which i allowed on VPN ACL, but my other traffic not going to regular internet on my laptop,
what additional required to force my internet to go to regular internet instead of getting encrypted?
Also attaching output of route print at the point when VPN is connected.
ip local pool RA_VPN_POOL 10.1.200.100-10.1.200.150 mask 255.255.255.0
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto dynamic-map RA_VPN 65535 set transform-set ESP-AES-128-SHA
crypto dynamic-map RA_VPN 65535 set security-association lifetime seconds 28800
crypto dynamic-map RA_VPN 65535 set security-association lifetime kilobytes 4608000
crypto map VPN_MAP 65535 ipsec-isakmp dynamic RA_VPN
crypto map VPN_MAP interface outside
isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
tunnel-group ITT_RA type remote-access
tunnel-group ITT_RA general-attributes
address-pool RA_VPN_POOL
default-group-policy RA_VPN_GP
tunnel-group ITT_RA ipsec-attributes
pre-shared-key <group key>
group-policy RA_VPN_GP internal
group-policy RA_VPN_GP attributes
dns-server value 10.0.0.1 10.0.0.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Split_Tunnel_List
default-domain value mydomain.com
address-pools value RA_VPN_POOL
access-list Split_Tunnel_List extended permit ip host 10.110.10.150 10.1.200.0 255.255.255.0
access-list nonattest extended permit ip host 10.110.10.150 10.1.200.0 255.255.255.0
nat (inside) 0 access-list nonattest
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.111.36.1 10.111.36.9 276
0.0.0.0 0.0.0.0 On-link 10.1.200.100 20
10.1.200.0 255.255.255.0 On-link 10.1.200.100 276
10.1.200.100 255.255.255.255 On-link 10.1.200.100 276
10.1.200.255 255.255.255.255 On-link 10.1.200.100 276
10.110.10.150 255.255.255.255 10.1.200.1 10.1.200.100 100
10.111.36.0 255.255.255.0 On-link 10.111.36.9 276 -
Unable to access/lan2lan ping from VPN Fortigate to Cisco ASA 5505
Problem : Unable to access user A to user B
User A --- router A (122, fortigate 80c) --- (Site to Site VPN between fortigate & cisco asa) --- router B (93, cisco Asa 5505{in front asa got cisco800[81] before to internet} ) --- User B
After using wizard to configure the cisco ASA site to site VPN, the site-to-site tunnel is up.
Ping is unsuccessful from user A to user B
Ping is successful from user B to user A, data is accessable
After done the packet tracer from user A to user B,
Result :
Flow-lookup
Action : allow
Info: Found no matching flow, creating a new flow
Route-lookup
Action : allow
Info : 192.168.5.203 255.255.255.255 identity
Access-list
Action : drop
Config Implicit Rule
Result - The packet is dropped
Input Interface : inside
Output Interface : NP Identify Ifc
Info: (acl-drop)flow is denied by configured rule
Below is Cisco ASA 5505's show running-config
ASA Version 8.2(1)
hostname Asite
domain-name ssms1.com
enable password ZZZZ encrypted
passwd WWWW encrypted
names
name 82 B-firewall description Singapore office firewall
name 192.168.1.0 B-inside-subnet description Singapore office internal LAN IP
name 192.168.200.0 A-inside-VLAN12 description A-inside-VLAN12 (fortinet)
name 192.168.2.0 fw-inside-subnet description A office internal LAN IP
name 122 A-forti
interface Vlan1
nameif inside
security-level 100
ip address 192.168.5.203 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 93 255.255.255.240
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name ssms1.com
object-group network obj_any
network-object 0.0.0.0 0.0.0.0
access-list inside_nat0_outbound extended permit ip any 80 255.255.255.240
access-list inside_nat0_outbound extended permit ip fw-inside-subnet 255.255.255.0 B-inside-subnet 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.5.0 255.255.255.0 A-inside-VLAN12 255.255.255.0
access-list outside_cryptomap extended permit ip fw-inside-subnet 255.255.255.0 B-inside-subnet 255.255.255.0
access-list Outside_nat-inbound extended permit ip A-inside-VLAN12 255.255.255.0 192.168.5.0 255.255.255.0
access-list Outside_nat-inbound extended permit ip host A-forti 192.168.5.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.5.0 255.255.255.0 A-inside-VLAN12 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-631.bin
no asdm history enable
arp timeout 14400
global (outside) 101 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 101 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 81 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http B-inside-subnet 255.255.255.0 inside
http fw-inside-subnet 255.255.255.0 inside
http 0.0.0.0 255.255.255.255 outside
http 0.0.0.0 0.0.0.0 outside
http 192.168.5.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer A-forti
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map 2 match address outside_cryptomap
crypto map outside_map 2 set peer B-firewall
crypto map outside_map 2 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 20
authentication pre-share
encryption aes-192
hash md5
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption aes-256
hash md5
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 192.168.5.10-192.168.5.20 inside
dhcpd dns 165 165 interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
username admin password XXX encrypted privilege 15
tunnel-group 122 type ipsec-l2l
tunnel-group 122 ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
class-map outside-class
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
message-length maximum client auto
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
policy-map outside-policy
description ok
class outside-class
inspect dns
inspect esmtp
inspect ftp
inspect h323 h225
inspect h323 ras
inspect icmp
inspect icmp error
inspect netbios
inspect rsh
inspect rtsp
inspect sip
inspect skinny
inspect sqlnet
inspect sunrpc
inspect tftp
inspect xdmcp
service-policy global_policy global
service-policy outside-policy interface outside
prompt hostname context
Cryptochecksum: XXX
: end
Kindly need your expertise&help to solve the problemany1 can help me ?
-
Cisco Asa 5505 and Layer 3 Switch With Remote VPN Access
i got today a new CISCO LAYER 3 Switch .. so here is my scenrio
Cisco Asa 5505
I
Outside == 155.155.155.x
Inside = 192.168.7.1
VPN POOL Address = 10.10.10.1 - 10.10.10.20
Layer 3 Switch Config
Vlan 2
interface ip address = 192.168.1.1
Vlan 2
interface ip address = 192.168.2.1
Vlan 2
interface ip address = 192.168.3.1
Vlan 2
interface ip address = 192.168.4.1
Vlan 2
interface ip address = 192.168.5.1
ip Routing
So i want My Remote Access VPN clients to access all this Networks. So Please can you give me a helpfull trick or Link to configure the rest of my routing
Thank You allWhen My Remote VPN is Connected , it reaches 192.168.7.2 of the Layer 3 VLan that's Connected to The ASA 5505 ,
But i can't reach the rest of the VLAN - example
192.168.1.1
192.168.1.2
192.168.1.3
192.168.1.4
192.168.1.5
But i can reach the Connected Interface Vlan to My ASA ..
So here i think iam miss configuration to my Route
Any Help Please this is urgent -
Cisco ASA 5505 Remote Access IP/Sec VPN Connectivity Issues
We have a Cisco ASA that we use just for Remote Access VPN. It uses UDP and was working fine for about 2 months. Recently clients have had intermittent issues when connecting from home. The following message is display by the Cisco VPN Client :
"Secure VPN connection terminated locally by the Client. Reason 412: The remote peer is no longer responding"
Upon looking at a client side packet capture, I notice that no response is being given back to the client for the udp packets sent to the ASA on udp 500. If I login to the ASA from the LAN and send a single ping FROM the ASA, then the client can connect without issue. I don't understand the significance of the needed outbound ping since ping is not used by the client to test if the ASA is alive.
Once again this is a remote access udp ip/sec VPN. I set most of it up with the VPN wizard and then backed up the config. The issue started happening at least a month after setup (maybe two) and I restored to the saved config just in-case, but the issue remains.
Any insight would be greatly appreciated.
I'm using IOS 831 and have tried 821 and 823 as one thread that I found recommended downgraded to 821.
Thanks much,
JustinJavier,
I logged into the ASA last time the VPN went down. I issued the following commands:
debug crypto isakmp 190
debug crypto ipsec 190
capture outside-cap interface outside match udp any any
I then used a remote access tool to access the client and tried to connect. I got absolutely nothing from debugging. So I issued the following command:
show capture outside | include 500
and also got nothing. So I issued the following command:
ping 4.2.2.2
Upon which my normal deug messaged began to showup, so I issued the show capture outside command again and recieved the expected output below:
1: 15:44:18.570160 802.1Q vlan#2 P0 REMOTE_IP.1151 > OFFICE_IP.500: udp 868
2: 15:44:18.579269 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1151: udp 444
3: 15:44:18.703866 802.1Q vlan#2 P0 REMOTE_IP.1151 > OFFICE_IP.500: udp 172
4: 15:44:18.706567 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1151: udp 76
5: 15:44:18.831499 802.1Q vlan#2 P0 REMOTE_IP.1151 > OFFICE_IP.500: udp 92
6: 15:44:19.024061 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1151: udp 76
7: 15:44:19.111963 802.1Q vlan#2 P0 REMOTE_IP.1151 > OFFICE_IP.500: udp 60
8: 15:44:19.517185 802.1Q vlan#2 P0 REMOTE_IP.1151 > OFFICE_IP.500: udp 204
9: 15:44:19.521350 802.1Q vlan#2 P0 REMOTE_IP.1151 > OFFICE_IP.500: udp 92
10: 15:44:19.522723 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1151: udp 252
11: 15:44:42.121957 802.1Q vlan#2 P0 REMOTE_IP.1155 > OFFICE_IP.500: udp 868
12: 15:44:42.130822 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1155: udp 444
13: 15:44:42.228397 802.1Q vlan#2 P0 REMOTE_IP.1155 > OFFICE_IP.500: udp 172
14: 15:44:42.231036 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1155: udp 76
15: 15:44:42.329557 802.1Q vlan#2 P0 REMOTE_IP.1155 > OFFICE_IP.500: udp 92
16: 15:44:42.521091 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1155: udp 76
17: 15:44:42.610167 802.1Q vlan#2 P0 REMOTE_IP.1155 > OFFICE_IP.500: udp 60
18: 15:44:42.649258 802.1Q vlan#2 P0 REMOTE_IP.1155 > OFFICE_IP.500: udp 204
19: 15:44:42.653790 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1155: udp 252
20: 15:44:42.789342 802.1Q vlan#2 P0 REMOTE_IP.1155 > OFFICE_IP.500: udp 1036
21: 15:44:42.792119 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1155: udp 92
22: 15:44:42.800846 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1155: udp 188
23: 15:44:42.892120 802.1Q vlan#2 P0 REMOTE_IP.1155 > OFFICE_IP.500: udp 60
34: 15:44:54.446220 802.1Q vlan#2 P0 REMOTE_IP.1155 > OFFICE_IP.500: udp 92
35: 15:44:54.447913 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1155: udp 92
70: 15:45:01.825000 802.1Q vlan#2 P0 OFFICE_IP.10000 > REMOTE_IP.10000: udp 100
174: 15:45:03.417764 802.1Q vlan#2 P0 OFFICE_IP.10000 > REMOTE_IP.10000: udp 500
377: 15:45:07.881500 802.1Q vlan#2 P0 REMOTE_IP.10000 > OFFICE_IP.10000: udp 100 1: 15:44:18.570160 802.1Q vlan#2 P0 REMOTE_IP.1151 > OFFICE_IP.500: udp 868
2: 15:44:18.579269 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1151: udp 444
3: 15:44:18.703866 802.1Q vlan#2 P0 REMOTE_IP.1151 > OFFICE_IP.500: udp 172
4: 15:44:18.706567 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1151: udp 76
5: 15:44:18.831499 802.1Q vlan#2 P0 REMOTE_IP.1151 > OFFICE_IP.500: udp 92
6: 15:44:19.024061 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1151: udp 76
7: 15:44:19.111963 802.1Q vlan#2 P0 REMOTE_IP.1151 > OFFICE_IP.500: udp 60
8: 15:44:19.517185 802.1Q vlan#2 P0 REMOTE_IP.1151 > OFFICE_IP.500: udp 204
9: 15:44:19.521350 802.1Q vlan#2 P0 REMOTE_IP.1151 > OFFICE_IP.500: udp 92
10: 15:44:19.522723 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1151: udp 252
11: 15:44:42.121957 802.1Q vlan#2 P0 REMOTE_IP.1155 > OFFICE_IP.500: udp 868
12: 15:44:42.130822 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1155: udp 444
13: 15:44:42.228397 802.1Q vlan#2 P0 REMOTE_IP.1155 > OFFICE_IP.500: udp 172
14: 15:44:42.231036 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1155: udp 76
15: 15:44:42.329557 802.1Q vlan#2 P0 REMOTE_IP.1155 > OFFICE_IP.500: udp 92
16: 15:44:42.521091 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1155: udp 76
17: 15:44:42.610167 802.1Q vlan#2 P0 REMOTE_IP.1155 > OFFICE_IP.500: udp 60
18: 15:44:42.649258 802.1Q vlan#2 P0 REMOTE_IP.1155 > OFFICE_IP.500: udp 204
19: 15:44:42.653790 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1155: udp 252
20: 15:44:42.789342 802.1Q vlan#2 P0 REMOTE_IP.1155 > OFFICE_IP.500: udp 1036
21: 15:44:42.792119 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1155: udp 92
22: 15:44:42.800846 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1155: udp 188
23: 15:44:42.892120 802.1Q vlan#2 P0 REMOTE_IP.1155 > OFFICE_IP.500: udp 60
34: 15:44:54.446220 802.1Q vlan#2 P0 REMOTE_IP.1155 > OFFICE_IP.500: udp 92
35: 15:44:54.447913 802.1Q vlan#2 P0 OFFICE_IP.500 > REMOTE_IP.1155: udp 92
70: 15:45:01.825000 802.1Q vlan#2 P0 OFFICE_IP.10000 > REMOTE_IP.10000: udp 100
174: 15:45:03.417764 802.1Q vlan#2 P0 OFFICE_IP.10000 > REMOTE_IP.10000: udp 500
377: 15:45:07.881500 802.1Q vlan#2 P0 REMOTE_IP.10000 > OFFICE_IP.10000: udp 100
It would seem as if no traffic reached the ASA until some outbound traffic to an arbitrary public IP. In this case I sent an echo request to a public DNS server. It seems almost like a state-table issue although I don't know how ICMP ties in.
Once again, any insight would be greatly appreciated.
Thanks,
Justin
Maybe you are looking for
-
Forcing Messages to be processed
Hi Everybody, :. I need to process all pending messages before doing some task. Is there a way to process every message in the Event queue? Is there a flushMessages method or alike? Regards. kilsw5
-
Personal No. Name in IW37N or IW49N report required
Dear Expert, When execute the transaction IW37N and get the operation wise order report, I am getting personal no. for that perticular operation in a order. Now, the requirement is that report should display the Personal No. with Name (PA0001 - ENAME
-
Hello Community, I just made a PDF form on Adobe Acrobat XI Pro (trial version). In the last 3 textboxes, people can fill their e-mail. I want to make a interactive button with when you click it, outlook opens and the 3 mailadresses are there. Is thi
-
Regarding Dual Sim Mobile Launch
I want to know when Nokia launch dual sim support phones in which simultaneously both sims are active.........& I want to give Nokia a suggestion that plz launch dual sim mobiles with different range......e.g from 2000-3500 Indian Rs. From 4000-6000
-
hi i want to reformat my macbook pro mid 2012 because i think theres a keylogger in it. my moms email has been hacked recently and i feel that a part of it is because of the teamviewer app (remote dekstop app). i have deleted the app but the perpetra