How does create and associate an apple id to an existing email?

Hello everybody,
Please, how can I found  an apple id when I know my e-mail only ?
Thank you,

To create a new Apple ID go to http://appleid.apple.com and click 'Create an Apple ID'.
If you have created an Apple ID but forgotten it, click 'Find your Apple ID'.

Similar Messages

  • How does "create and wire unwired cases" work? I can't get it to do anything....

    Ok, I have an event structure with a ton of events. 
    I've just added a value that goes through it...this value is a shift register on the outter loop.
    I see that when your right click the tunnel on the event...there is the switch to turn off "Use Default if Un-wired".
    I also see some options that appear to do what I want to do...and that is to wired all unwired connections on the other events with "Linkted Input Tunnels" -> "Create & Wire Unwired Cases".
    When I click this..the cursor turns to a new shape...but from here...I cannot figure how to get this to work...I've tried right clicking on the 'broken' tunnel at that end....I've tried left clicking in an event that is unwired....but nothing.
    Can someone help me here...I think this is what I want...but can't get it to work.
    Thank you in advance,
    cayenne
    Solved!
    Go to Solution.

    cayenne wrote:
    Ok, I have an event structure with a ton of events. 
    I've just added a value that goes through it...this value is a shift register on the outter loop.
    I see that when your right click the tunnel on the event...there is the switch to turn off "Use Default if Un-wired".
    I also see some options that appear to do what I want to do...and that is to wired all unwired connections on the other events with "Linkted Input Tunnels" -> "Create & Wire Unwired Cases".
    When I click this..the cursor turns to a new shape...but from here...I cannot figure how to get this to work...I've tried right clicking on the 'broken' tunnel at that end....I've tried left clicking in an event that is unwired....but nothing.
    Can someone help me here...I think this is what I want...but can't get it to work.
    Thank you in advance,
    cayenne
    This option is used when you have large number of case structures and the wireing terminal is same. If you want to understand those things do these things
    Create an Enum with 4 elements
    Create a state machine design pattern but wire only one case to the shift register and leave the other cases un wired
    Go to the unwired case at the right click the unwired terminal and select Create & Wire Unwired Cases you will get a wire bundle click that in the input terminal that connects the output
    Undo the previous one and go to the wired case and right click the termianl at the right side of the case structure and select the same Create & Wire Unwired Cases.
    I guess the explanation is clear
    The best solution is the one you find it by yourself

  • HT5622 Why does my credit car decline when I'm trying to review my credit card details? I'm trying to creat and finish  my apple login but it keeps saying declined. Does Apple charge credit cards just for registering a credit card??

    Why does my credit car decline when I'm trying to review my credit card details? I'm trying to creat and finish  my apple login but it keeps saying declined. Does Apple charge credit cards just for registering a credit card??

    Just to add to AnaMusic's list:
    Does Apple charge credit cards just for registering a credit card??
    Yes, Apple will validate the credit card, when you are setting up the account information for an Apple ID. The credit card must be valid in the country of the store, that you are trying to buy from. And the card you are using must neither be blocked by the issuer of the card nor by the Apple for store services.
    The error message  you are citing is misleading: The error message could either mean
    that you are using the wrong type of card (Are you using a debit card or a credit card?)
    that the AppeID or the credit card you are using has been blocked for security reasons,
    or that you are encountering a store error, because you are trying to use the iTunes Store or AppStore from a country, where it is not yet supported.

  • The App Store print is too small and apparently unadjustable.  I am in my 60s and this problem will not resolve itself over time.  How does one effectively complain to Apple?

    The App Store print is too small for my 7th-decade eyes and is apparently unadjustable.  How does one effectively complain to Apple about this?
    Thanks, Jeremy

    Hi Jeremy...
    There's a work around that may help you. The Mac OS X has "accessibity" features installed that can assist in viewing text.
    Open System Preferences then select Universal Access then select the Seeing tab.
    Zoom settings are available there.
    More about Mac OS X accessiliity here >  Apple - Accessibility - OS X - Vision
    You can provide feedback to Apple here >  Apple - Mac OS X - Feedback
    If you are not aware, when viewing Safari webpages, you can press Command + (plus)  or Command - (minus) to adjust the size of the page.
    For zooming text only, click View from the Safari menu bar then from the drop down menu click Zoom Text Only.

  • How does one register a non apple phone number so as use ichat and texting with that phone number?, How does one register a non apple phone number so as use ichat and texting with that phone number?

    How does one register a non apple phone number so as use ichat with that phone?

    Have you tried applying the update by going to Help>Updates within Photoshop Lightroom?  The update should be using the same licensing?  Did you perhaps customize the installation location?  Finally which operating system are you using?

  • How to create and call a COM component in Java

    Hi All,
    can you suggest how to create and call a COM component..or if have any sample simple application can you send it to me...i will try to develop my project.
    actually i am configuring a OCR Engine using SDK which is in VB .Net when i contacted their support they told that if i have any sample COM based component Project they will help me...
    So please can you help in this.
    Thanks in advance.

    As said by my fellow posters Java Devolopment Environment (Except Microsoft implementation of JVM,this is no longer supported by MS themseleves) does not provide an built-in support to serve this cause.
    If you are looking to devolop a custom based solution the below is a good place to start with where end user is talking about Java <=> JNI <=> Native <=> COM connectivity.
    [http://bloggershetty.blogspot.com/2004/12/java-jni-com-activex-bridge-lots-of.html]
    However,if you are looking for ready made solutions ?
    Implementation any one of the solutions stated below might serve your cause.
    Open Source Solutions:
    [http://j-interop.org/]
    [http://www.danadler.com/jacob/]
    Commercial Solutions:
    [http://javacombridge.com/]
    [http://www.jnbridge.com/]
    [http://www.nevaobject.com/j2cdetails.asp?kw=java%20com%20bridge]
    [http://j-integra.intrinsyc.com/]
    Hope this might help :)
    REGARDS,
    RaHuL

  • How to create and implement a new work schedule rule successfully?

    Dear Community,
    How to create and implement a new work schedule rule successfully?
    In other words, what are all the basic steps to create and implement a new work schedule rule successfully?
    Thanks in advance.

    Hi,
    Follow the below steps to create Work Schedule:
    Holiday Calendar
    Transaction Code: SCAL
    Holiday calendar comprises of list of paid holidays to be given to employees on festivals by the company.
    Personnel Area/SubArea Groupings
    Go to SPRO --> Time Management --->Work Schedules --> Personnel SubArea Groupings
    Maintain perosnnel area/Subarea groupings for work schedule.
    i.e. Suppose in Mumbai you have WS = GEN ( 10 to 6) and in Chennai you have WS = NORM ( 8 to 4 )
    Work Schedule
    Go to SPRO --> Time Management --->Work Schedules -->Daily Work Schedules
    Go to SPRO --> Time Management --->Work Schedules -->Period Work Schedules
    Daily Work Schedule is actually your office timings with breaks (paid /unpaid) i.e. Planned Working Time which is then included
    in Period Work Schedule to make a week ( M T W T F S S )
    Daily Work Schedule (i.e. Day) -
    > Period Work Schedule (i.e. Week)
    Work Schedule Rules
    Go to SPRO --> Time Management --->Work Schedules -->Work Schedule Rules and Work Schedules
    After doing above mentioned configurations,maintain employee group/subgroup groupings in which you have to define which calendar is applicable for which type of employees for which work schedule.
    You will maintain this work schedule in infotype 0007 - Planned Working Time of employee via transaction code - PA30

  • How to create and maintain a backup catalog, separate from default  location,  on and external HD

    How to create and maintain a backup catalog on a separate hd - separate from default location of the catalog?

    Simply copy the LR catalog backup file to another location. It’s quite small and only contains metadata e.g. your edit develop settings, keywords, captions, titles and camera exif data etc.
    The LR backup does not physically copy your image files. So make sure you have a separate system backup for your photo files and folders.

  • HOW TO CREATE  and  USE EVENTS IN WORKFLOWS .

    HOW TO CREATE  and  USE EVENTS IN WORKFLOWS with the help of classes.
    What i am doing is..
    open se24
    event tab->event name->parameters
    method tab->method name->event handler->copy parameters
    interface tab->if_workflow->enter
    tell me what else to do step by step
    Another important thing is that HOW to use these class events to trigger the workflows.
    REPLY ASAP
    THXS IN ADVANCE

    Hi,
    Pl. see this blog...
    Raising ABAP OO events for workflow
    Regards,
    JOy.

  • How to create and share streaming video?

    Hi -
    I have finally finished a project in PE8 and I'd like to upload it to my website so that others can stream it.
    I have created output in FLV, MOV and MPG formats.
    I have uploaded them to my web server.
    However, whenever I link to the video, my browser (IE or Firefox) just asks to download or run it.
    Then, it tries to download the entire video - this is a problem as the files are up to 1.3gb.
    I've tried this:
    <html>
    <a href="myvideo.flv">CLICK HERE</a>
    </html>
    and this:
    <OBJECT CLASSID="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B"
    CODEBASE="http://www.apple.com/qtactivex/qtplugin.cab" WIDTH="160" HEIGHT="136" >
    <PARAM NAME="src" VALUE="myvideo.mov" >
    <PARAM NAME="autoplay" VALUE="true" >
    <EMBED SRC="myvideo.mov" TYPE="image/x-macpaint"
    PLUGINSPAGE="http://www.apple.com/quicktime/download" WIDTH="160" HEIGHT="136" AUTOPLAY="true"></EMBED>
    </OBJECT>
    and this:
    <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,29,0" width="400" height="400" >
    <param name="movie" value="myvideo.flv">
    <param name="quality" value="high" >
    <param name="LOOP" value="false">
    <embed src="myvideo.flv" width="400" height="400" loop="false" quality="high" pluginspage="http://www.macromedia.com/go/getflashplayer" type="application/x-shockwave-flash"></ embed >
    </ object >
    So, why isn't it streaming?
    Is it the video format?
    The embedding on the web page?
    My server?
    Perhaps you can share the details of how you created and setup a streaming video?
    Thanks....

    You need to embed a player for the file. This will differ by the file type that you choose. I'd probably go with a Flash player, but you have other choices.
    I'd post your request for the exact instructions, and HTML code needed, plus tips on optimization to the Muvipix "Community," probably under the "Water Cooler" sub-forum. The Webmaster there, Ron, is an expert in embedded players, as are several other subscribers. I'll bet that you'll get the exact code, with all sorts of useful tweaks, in no time. If Ron suggests another file type and player, listen to him, and not to me. I just deliver the streaming AV files in the exact format that my client asks for. They have their Webmaster use them in their particular page design. My job ends, before your's, now, begins.
    Good luck,
    Hunt

  • How does create a server with multiple Clients ?

    Any people can lead me .
    How does create a server with multiple Clients ?
    Thanks

    For a multithreaded server you will need a thread to listen and at least one thread per client. If the conversation is half duplex, one thread per client works very well, if it's full duplex you will find one thread to send and one to receive much easier to program.
    I posted a Simple Socket Server that uses 1+2*clients threads.

  • How to create and save playlist using JMF?

    Hello i m new to JMF. Can anyone tell me how to create and save a playlist of media files using JMF.
    also how can i play .DAT files using JMF?
    Does JMF supports AVI,Asf files?

    Hello i m new to JMF. Can anyone tell me how to create and save a playlist of media files using JMF.
    also how can i play .DAT files using JMF?
    Does JMF supports AVI,Asf files?

  • How to create and send clob value to SP?

    Hi,
    Does any one of an example of how to create and send
    a clob value(as a IN parameter to storedprocedure) from JAVA to
    the StoredProcedure. I need the JAVA code.
    null

    Hi 
    Following is sample code you can use.
    DECLARE @testID Int
    DECLARE @year int 
    DECLARE @testtype datatype
    SELECT @testtype=testtype from yourTable Where Your condition
    SELECT  @year= year from yourTable Where your conditon (you need to make sure you assign or get @year variable )
    SELECT @testid=id from test where  year=@year and testtype=@testtype)
    Hope this helps
    Regards

  • How to create and delete an Endeca application in Windows

    HI,
    can you please help me in ,
    how to create and delete an Endeca application inWindows machine not in Linux Machine.
    Thanks.....

    Hi,
    Steps to create an Endeca Application are clearly given in Getting Started Guide.
    http://docs.oracle.com/cd/E38680_01/Common.311/pdf/GettingStarted.pdf (Chapter 6 : Deploying a Reference Application)
    If you want to create an endeca application so as to integrate with Product Catalog system such as ATG using ATG 10.1.1 or above , then create an endeca application using the discover-data-catalog-integration reference application. Steps for doing this are documented in ProductCatalogDTGuide
    http://docs.oracle.com/cd/E38679_01/ToolsAndFrameworks.311/pdf/ProductCatalogDTGuide.pdf (Deploying the Product Catalog Application)
    To delete an Endeca Application that you have created in Windows/linux
    1. Navigate to the control directory of the application that you want to remove and execute the script
    runCommand.bat --remove-app (Removes the provisioning information with EAC admin console)
    2. Remove the instance configuration files for the application using the emgr_update command line utility
    emgr_update.bat host localhost:8006 app_name My_app action remove_all_settings prefix My_prefix
    3. You can then explicitly delete the directory in the Endeca_apps directory where you have initially created your application.
    If you are using discover-data-catalog-integration, you can remove the CAS Record Store Instances by navigating to CAS/bin directory and executing
    ./component-manager-cmd.sh delete-component -n {YOUR_APP_RECORD_STORE_NAME}
    Thanks,
    Shabari

  • How to create and read text file using LabVIEW 7.1 PDA module?

    How to create and read text file using LabVIEW 7.1 PDA module? I can not create a text file and read it.
    I attach my code here.
    Attachments:
    File_IO.vi ‏82 KB

    Well my acquisition code runs perfect. The problem is reading it. I can't seem to read my data no matter what I do. My data gets saved as a string using the array to string vi but I've read that the string to array vi (which I need to convert back to array to read my data) does not work on the pda. I'm using version 8.0. So I was trying to modify the program posted in this discussion so that it would save data from my DAQ. I did that but I still can't read the data after its saved. I really don't know what else to do. All I need to do is read the data on the pda itself. I can't understand why I'm having such a hard time doing that. I found a possible solution on another discussion that talks about parsing the strings because of the bug in the "string to array" vi. However, that lead me to another problem because for some reason, the array indicators or graphs don't function on the pda. When i build the program to the pda or emulator, the array indicators are faded out on the front panel as if the function is not valid. Does this kind of help give a better picture of what I'm trying to do. Simply read data back. Thanks.

Maybe you are looking for