How does "create and wire unwired cases" work? I can't get it to do anything....

Ok, I have an event structure with a ton of events.
I've just added a value that goes through it...this value is a shift register on the outter loop.
I see that when your right click the tunnel on the event...there is the switch to turn off "Use Default if Un-wired".
I also see some options that appear to do what I want to do...and that is to wired all unwired connections on the other events with "Linkted Input Tunnels" -> "Create & Wire Unwired Cases".
When I click this..the cursor turns to a new shape...but from here...I cannot figure how to get this to work...I've tried right clicking on the 'broken' tunnel at that end....I've tried left clicking in an event that is unwired....but nothing.
Can someone help me here...I think this is what I want...but can't get it to work.
Thank you in advance,
cayenne
Solved!
Go to Solution.

cayenne wrote:
Ok, I have an event structure with a ton of events.
I've just added a value that goes through it...this value is a shift register on the outter loop.
I see that when your right click the tunnel on the event...there is the switch to turn off "Use Default if Un-wired".
I also see some options that appear to do what I want to do...and that is to wired all unwired connections on the other events with "Linkted Input Tunnels" -> "Create & Wire Unwired Cases".
When I click this..the cursor turns to a new shape...but from here...I cannot figure how to get this to work...I've tried right clicking on the 'broken' tunnel at that end....I've tried left clicking in an event that is unwired....but nothing.
Can someone help me here...I think this is what I want...but can't get it to work.
Thank you in advance,
cayenne
This option is used when you have large number of case structures and the wireing terminal is same. If you want to understand those things do these things
Create an Enum with 4 elements
Create a state machine design pattern but wire only one case to the shift register and leave the other cases un wired
Go to the unwired case at the right click the unwired terminal and select Create & Wire Unwired Cases you will get a wire bundle click that in the input terminal that connects the output
Undo the previous one and go to the wired case and right click the termianl at the right side of the case structure and select the same Create & Wire Unwired Cases.
I guess the explanation is clear
The best solution is the one you find it by yourself

Similar Messages

How to create and implement a new work schedule rule successfully?

Dear Community,
How to create and implement a new work schedule rule successfully?
In other words, what are all the basic steps to create and implement a new work schedule rule successfully?
Thanks in advance.

Hi,
Follow the below steps to create Work Schedule:
Holiday Calendar
Transaction Code: SCAL
Holiday calendar comprises of list of paid holidays to be given to employees on festivals by the company.
Personnel Area/SubArea Groupings
Go to SPRO --> Time Management --->Work Schedules --> Personnel SubArea Groupings
Maintain perosnnel area/Subarea groupings for work schedule.
i.e. Suppose in Mumbai you have WS = GEN ( 10 to 6) and in Chennai you have WS = NORM ( 8 to 4 )
Work Schedule
Go to SPRO --> Time Management --->Work Schedules -->Daily Work Schedules
Go to SPRO --> Time Management --->Work Schedules -->Period Work Schedules
Daily Work Schedule is actually your office timings with breaks (paid /unpaid) i.e. Planned Working Time which is then included
in Period Work Schedule to make a week ( M T W T F S S )
Daily Work Schedule (i.e. Day) -
> Period Work Schedule (i.e. Week)
Work Schedule Rules
Go to SPRO --> Time Management --->Work Schedules -->Work Schedule Rules and Work Schedules
After doing above mentioned configurations,maintain employee group/subgroup groupings in which you have to define which calendar is applicable for which type of employees for which work schedule.
You will maintain this work schedule in infotype 0007 - Planned Working Time of employee via transaction code - PA30

I am a first time user trying to download a movie to my PC. I created and verified my apple ID, but can't get into the itunes store.

I am a first time user trying to download a movie to my PC. I created and verified my apple ID, but can't get into the itunes store. Please help.

Why not? What, if any, errors are occurring when trying to access the itunes store?
Is iTunes actually installed?

Help please - have a Nano and a Shuffle and neither are working! The Nano wheel appears to have stopped working - I can't get it to do anything. I've done the reset,it worked the first time but not since. And the shuffle won't sync with my library!

Hi,
I have an iPod shuffle 4th generation and an iPod Nano 5th generation . The Nano wheel appears to have stopped working - I can't get it to play or anything. I've done the reset and it worked the first time, but now the only way I can get it to play anything is to shake it and go with the shuffle choices - I can't change volume, song, pause or turn it off.
So, I decided to start using the Shuffle which I was given as a present last year. I've plugged it into my laptop (running windows 8 and newest version of iTunes). It appears in iTunes on the left hand side, but when I click to sync (whether I tick sync all or choose artists) it says synched but has no music. It seems to not be linked to the music library - when I tick synch all songs, next to the "sync music" it says 0 songs?
Any help to fix either would be really appreciated - I'm without any music at the moment and I'm going away this weekend!
Thanks

Hi Bblairjones,
If you are having issues with your Nano and Shuffle, you may want to try the Troubleshooting Assistants on the following page:
Apple Support: iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Regards,
- Brenden

TS3274 my ipad is locked up. It says"this ipad has not been backed up in 2 weeks, backups happen when this ipad is plugged in, locked, and connected to Wi-Fi" I can not get it to do anything

my ipad is locked up. It says "this ipad has not been backed up in 2 weeks. Backups happen when this ipad is plugged in, locked, and connected to Wi-Fi." I can't get it to do anything

Perform a Reset...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

TS2634 My Ipod Touch fell and cracked. It works but, can I get it fixed?

My Ipod Touch fell on cement and now, It is not looking in good shape..It cracked. So, i was wondering if i could find some answers. Can i get it fixed or do i need to buy a new one and lose all my progress?

If it works, make a backup. Go to Settings > iCloud > Storage & Backup > Back Up Now (assuming you have iOS 5.0 or later; if not, let us know).
Technically, you don't need to buy a new one. You get a discounted rate for an out-of-warranty replacement iPod since this type of damage is not covered under the warranty. For exact pricing, see: http://www.apple.com/support/ipod/service/prices/
You do not lose your progress if you have a backup.

How to create and wire an array of graphs

I have 15 channels of data comming from my AI read VI. First I tried to creat an array of graphs it didnot allow me to do that then I created a cluster of graph and put that in an array. Now I want to wire the graphs with the data comming from AI Read VI how do I do this?

Hello,
As seen in the "Acquire N Scans.vi" example program (found by going to Help > Find Examples and using the Search tab and typing in "analog"), you should be able to wire the "waveform data" output of the "AI Read" VI directly to a waveform graph indicator on the block diagram, regardless of the number of channels you are reading. The AI Read VI will auto-configure the output data so that when you read multiple channels, it creates the correct number of multiple plots on your waveform graph.
Please take a look at the attached screen shot to see how the connection can be made.
Please give this example a try with your hardware and channel list, and let me know if you have any further questions or concerns. I hope this helps!
Liz F.
National Inst
ruments
Attachments:
acquire_n_scans_block_diagram.bmp ‏628 KB

How does create and associate an apple id to an existing email?

Hello everybody,
Please, how can I found an apple id when I know my e-mail only ?
Thank you,

To create a new Apple ID go to http://appleid.apple.com and click 'Create an Apple ID'.
If you have created an Apple ID but forgotten it, click 'Find your Apple ID'.

How does friends and family mobile deal work ?

Hi there, just recently come back to Bt and have unlimited evening and weekend with friends and family mobile deal call plan.
Does this apply to all the mobiles I call, or do we have to register the numbers to get the discounted calls ?
Thanks in advance.
Shi

Hi shi,
Welcome to the forum.
The Friends and Family Mobile discount applies to all mobiles, you don't need to add any numbers. See here for more info on prices.
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

I was not aware of the automatic renewal of subscriptions and was chareged on 4/27 for another year of The Daily. How do I cancel the suscription and get reinbursed? I have recently found how to manage and shut off future renewals. Can i get a refund?

I was not aware of the automatic renewal of subscriptions and was charged on 4/27 for another year of The Daily. How do I cancel the suscription and get reinbursed? I have now shut off automtatic renewals. It would have been nice to know it was there to begin with!

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

How does mix and match works in ECC6.0?

How does mix and match works in ECC 6.0?
Can some shared on this topic?
Thanks in advance

It;s a term used in Retail for combination of sales item eg buy 3 get 1 any other @ xx price.

How does create a server with multiple Clients ?

Any people can lead me .
How does create a server with multiple Clients ?
Thanks

For a multithreaded server you will need a thread to listen and at least one thread per client. If the conversation is half duplex, one thread per client works very well, if it's full duplex you will find one thread to send and one to receive much easier to program.
I posted a Simple Socket Server that uses 1+2*clients threads.

How to create and delete an Endeca application in Windows

HI,
can you please help me in ,
how to create and delete an Endeca application inWindows machine not in Linux Machine.
Thanks.....

Hi,
Steps to create an Endeca Application are clearly given in Getting Started Guide.
http://docs.oracle.com/cd/E38680_01/Common.311/pdf/GettingStarted.pdf (Chapter 6 : Deploying a Reference Application)
If you want to create an endeca application so as to integrate with Product Catalog system such as ATG using ATG 10.1.1 or above , then create an endeca application using the discover-data-catalog-integration reference application. Steps for doing this are documented in ProductCatalogDTGuide
http://docs.oracle.com/cd/E38679_01/ToolsAndFrameworks.311/pdf/ProductCatalogDTGuide.pdf (Deploying the Product Catalog Application)
To delete an Endeca Application that you have created in Windows/linux
1. Navigate to the control directory of the application that you want to remove and execute the script
runCommand.bat --remove-app (Removes the provisioning information with EAC admin console)
2. Remove the instance configuration files for the application using the emgr_update command line utility
emgr_update.bat host localhost:8006 app_name My_app action remove_all_settings prefix My_prefix
3. You can then explicitly delete the directory in the Endeca_apps directory where you have initially created your application.
If you are using discover-data-catalog-integration, you can remove the CAS Record Store Instances by navigating to CAS/bin directory and executing
./component-manager-cmd.sh delete-component -n {YOUR_APP_RECORD_STORE_NAME}
Thanks,
Shabari

How to create and read text file using LabVIEW 7.1 PDA module?

How to create and read text file using LabVIEW 7.1 PDA module? I can not create a text file and read it.
I attach my code here.
Attachments:
File_IO.vi ‏82 KB

Well my acquisition code runs perfect. The problem is reading it. I can't seem to read my data no matter what I do. My data gets saved as a string using the array to string vi but I've read that the string to array vi (which I need to convert back to array to read my data) does not work on the pda. I'm using version 8.0. So I was trying to modify the program posted in this discussion so that it would save data from my DAQ. I did that but I still can't read the data after its saved. I really don't know what else to do. All I need to do is read the data on the pda itself. I can't understand why I'm having such a hard time doing that. I found a possible solution on another discussion that talks about parsing the strings because of the bug in the "string to array" vi. However, that lead me to another problem because for some reason, the array indicators or graphs don't function on the pda. When i build the program to the pda or emulator, the array indicators are faded out on the front panel as if the function is not valid. Does this kind of help give a better picture of what I'm trying to do. Simply read data back. Thanks.

How to create and drop partitions automatically?

How to create and drop partitions automatically?
The environment is Oracle 10g(10.2.0.3) on the RHEL4.0 system.
I want to partition the MESSAGE table by date (NUMTODSINTERVAL(1,'DAY') ). One partition per day. Because the table is huge, only 2 partitions (today and yesterday's data) are necessary to be kept online. All the partitions that earlier than the previous day will be backed up and then dropped. I want to make the partition creating and dropping jobs run automatically. How to do it?
Thank you

junez wrote:
How to create and drop partitions automatically?
The environment is Oracle 10g(10.2.0.3) on the RHEL4.0 system.
I want to partition the MESSAGE table by date (NUMTODSINTERVAL(1,'DAY') ). One partition per day. Because the table is huge, only 2 partitions (today and yesterday's data) are necessary to be kept online. All the partitions that earlier than the previous day will be backed up and then dropped. I want to make the partition creating and dropping jobs run automatically. How to do it?With 11g, new partitions can automatically be created.
With 10g, you need to do that yourself. I prefer to create a "buffer" of future partitions - in case the job whose task it is to add new partitions gets held up or stuck. Or the job queue is full due to some problem and it does not get the chance to execute in time.
I dislike your partitioning criteria. I prefer using the date directly and not mangling it to something else. If a specific day has a large volume of data, then another option is to use hourly date ranged partitions. With local partitioned indexes and the date time range used for querying, this can be quite effective performance wise.
As for partitioning maintenance - I use a custom written partitionManager PL/SQL package that provides an interface for adding daily and hourly partitions to a table. Input parameters are for example name of the table, start date and the number of partitions to add. Similarly it provides interfaces for aging partitions - again by specifying a table and a date-time to use as the starting point, back into time, for removing old partitions.
I typically call this code from the actual application code itself - so before a new partition will be used for example, the app code will first ensure that it has a partition to use. This is safer than a separate job as the dependency is resolved where and when it is needed - and not done as a separate task.
For example - you should have a procedure/package that provides an app the means to log a message into your MESSAGE table. As part of an autonomous transaction, this procedure can check if the required partition exists, before attempting to insert a message into the table.
Where this approach is not possible, a DBMS_JOB can be used to create future partitions - but as I mentioned, rather have it add a bunch of future (empty) partitions in case something goes pear shape with the job mechanism.

How does "create and wire unwired cases" work? I can't get it to do anything....

Similar Messages

Maybe you are looking for