How does digital filter order influnce filtered data , the higher the better?

Seems that higher order filter has better filter effect ofcut-off frequnecy is set to be constant.
So filter order the higher the better?
is there any side effects for higher order? such as phase delay?

fenny,
The main effect of a higher filter order is that the roll-off is much quicker (i.e., there are fewer frequencies between the pass band and the stop band). Depending on the type of filter that you use, there may be more phase delay with higher orders. Some filters are designed for phase delay (I think elliptical and Chebyshev are phase delay filters), but some filters will not give anymore phase delay with higher orders (e.g. a Butterworth filter). But there aren't really any "side effects" to having higher orders other than possibly longer processing times. I hope this answers your questions!
Tyler S

Similar Messages

  • How does a Purchase Order get into 'Approved, Reserved' status?

    How does a Purchase Order get into 'Approved, Reserved' status?

    Hi,
    When an approved purchase order is unreserved and the GL date is modified and re-submitted for approval, the document (PO) gets reserved and approved status.
    I believe you put this question in a wrong thread (Financial), next time onwards, please put your question in correct thread and I am sure you will get the solution faster :).
    Regards,
    S.P DASH

  • How do I set a custom time & date format in the top bar?

    Hello guys,
    Very embarassing question, because I've had Apple's for all of my life (starting with the original Apple Macintosh) but I still haven't figured out one thing
    How do I set a custom time & date format in the top bar?
    When I go to System Preferences > Language & Text > Formats I can set different formats. I have no idea where you will see these, but I know that it's not the top bar where the time and date is being displayed. Because no matter what I enter, the format in the top bar will stay the same. I can only choose things like 24-Hour clock or not, blinking dots and so on in the Time & Date settings from the System Preferences.
    Can anyone here point me in the right direction? I see you can even choose to display the week of the year - I'd love to do that!
    All help appreciated!
    Greetings

    Language & Text system preferences, Formats tab, customize dates.
    There are also many third party menu item utilities that can.  Search Macupdate.com for some.
    One search yielded iClock Pro.  Although I never used it I would think it allows customization.  The link I gave you is to the Macupdate download page for that app.  On that same page is a Similar Software section which has other apps that can do the same thing. 
    One listed is iStat Menus.  The primary use for iStat Menus is not for displaying date/time but it does do that.  And I know it can do what you want because I use iStat Menus to track temperature sensors n my machine and, like you, I want to customize the menu time/date.  So I use it instead of the apple clock.  It does have the customization features I think you are looking for.

  • How does one add a personal recorded M4R file to the ring tones in the UK system for iPhone 3GS

    How does one add a personal recorded M4R file to the ring tones in the UK system for iPhone 3GS.
    I have tried all sorts of ways of adding my personal M4R file but can't find the place (within the UK versions of iTunes} to transfer this file so that I can select it as a ring tone.
    I've tried also changing to the US version of iTunes and still can't find a way of doing it, although I have heard that it can be done.

    You should be able to just drop it into the library within iTunes.
    http://cnettv.cnet.com/create-free-iphone-ringtones-using-itunes-8-0/9742-1_53-5 0003920.html
    Check out the video above for a lot good info. The ringtone must be less than 35 seconds.

  • How does QoS work with WAAS WCCP? What's the interaction between QoS Traffic Classification and WAE Traffic Application Policy?

    How does QoS work with WAAS WCCP? What's the interaction between Router QoS Traffic Classification and WAE Traffic Application Policy?

    By default, WAAS preserves the DSCP marking on intercepted packets.  There is a configuration option to set/override the DSCP value at the global (device), application, and classifier levels.  Currently WAAS provides marking only.  There is no action taken by WAAS based on the DSCP value.
    Regards,
    Zach

  • How does one set up two different iTunes accounts on the same computer so that they do not merge into one?

    How does one set up two different iTunes accounts on the same computer so that they do not merge into one?

    mparker402 wrote:
    So, when the other iTunes account needs to be used, I should log out of Windows and have the other user log in under a different Windows account, correct?  
    M Parker, 
    Yes, since you are trying to keep things separate, that is exactly what you would do.

  • What does different filter order,signal processing specialist please help

    I'm trying to filter out the high frequency noise(>2000hz), so I use a lowpass filter(butterworth filter) and set the frequency to be 2000 hz, but i noticed that when i use different order of filters, i got different results.
    i have tried order=20,40,80,200, what on earth does the filter order mean?? how does it inflence my filtered result? any singal processing expert here?
    thanks.

    Hi,
    An ideal lowpass filter will let all the frequencies under the cutoff frequency (2KHz in your case) pass without any change and filt out those greater than the cutoff frequency totally. Theoretically, when the order is infinte, you'll get an ideal lowpass filter. However, infinte order is not practical. Firstly, you do not have all the history data of the signal (since minor infinte). Secondly, the computing is impossible for infinte filter length. So when the order is a finite value, the lowpass filter is an approximation to the ideal filter. That means the frequencies under cutoff frequency are not passed exactly and the frequencies greater than the cutoff frequency are not really removed totally. The greater the order, the more the filter close to the
    ideal one and the more computations. This is the reason why you got different result when using different order. But it is not necessary to have filter with so high order you tried. Typically an order less than 10 will work well.

  • Butterworth filter is not filtering data properly

    Hello,
    I am trying to use a low-level Butterworth filter to filter some data.  I am sampling the data at 100 samples per second so I have been using this as the sampling frequency.  I have also initialized the filter so that it will theoretically work continuously.  After playing around with different cut off levels, to no success, I wanted to see if my data was simply passing through the filter correctly... which it isn't.  I have read related postings on "High Pass Filter Settings [NEW]" and I am thinking that my sample rate is not passing correctly to my filter.
    Does anyone have any idea why this would be the case... or how to fix my problem.  Eventually I would like to differentiate this data...
    I've included my LabView VI (the filter is in the first while loop).  I am using LabView 7.1 with PC-CARD DAS16/16AO
    Thanks
    Jenna
    Attachments:
    ALL CHANNELS AND AOUT - instantaneous voltage change.vi ‏249 KB

    Hi Lynn,
    The purpose of my LabView program is to read in a variable sine wave (which represents a swinging leg), measure the torque, position and angles over time and be able to adjust a motor on the fly.  My purpose in filtering is to allow for a smoothly differentiated signal.  If I differentiate without a filter… my signal is a mess.  The nominal waveshape is a sine wave and the frequencies and magnitudes of the signal vary with each trial.   Generally though, the frequency of the signal is 1.5 Hz or less.  The peak to peak amplitude for the analog out channel from an optical encoder (which measures the leg angle) is approximately 70 degrees (1.94V).  It is necessary to have the differentiated and filtered “angular velocity” in sync with the other channels to know the effect of the change in the motor speed at different points in the cycle.  I will be analyzing this data mainly after it has been collected, so the precision on the charts while it is running is not too important.
    I’ve tried modifying my VI so that you will be able to see it, but since my signal is continuous “making the current values default” freezes my VI at one point in time... so my simplified VI doesn’t run as the more complete one did.
    I have also briefly looked into a Savitzky Golay filter that differentiates and filters simultaneously, but I haven’t had much luck getting it to work.
    Any suggestions?
    Thanks
    Jenna

  • How can I filter a table from Data Control without enter query

    I have a table from a web service data control based on WSDL.
    I want to filter the table without input query at filter text box. Without filter text box, each would filter the table with a hardcoded query internally.
    For example, when user click A menu button then it filters the table where type = '1' and B menu button filters the table by type='2' and C menu button filters the table by type=' ' .
    How can I filter the table without enter query?
    Could anyone point me to a solution please.
    Thanks.
    jdev 11.1.5
    Edited by: 893364 on Oct 26, 2011 12:15 PM
    Edited by: 893364 on Oct 26, 2011 12:21 PM

    Hi,
    when you created the table, did you try selecting the "filter" option. Select the table and go to the Property Inspctor. In the tool bar of the Property Inspector there is an icon to change the configuration. Its adding filter filter fields for the user to search in.
    Option 2: The data of the Web Service actually is held in the iterators. If you wanted to filter the WebService query, I would not use the WS DC but a JAX-WS proxy in a POJO to fetch the WS Data. Then have the Data Control created from the POJO. You could have a method exposed on the POJO that allows you to filter the internally held data
    Frank

  • How does digital color meter work ?

    I just noticed the Digital Color Meter Application on Yosemite. Can / How does one make full use of this application to callibrate an Apple screen ?

    Thank you. This is explains the principle, but now how to use and benefit from the application? Can one adjust the screen colors thanks to this info, and if so, how? Furthermore, is there a list somewhere the gives the values of the ideal colors so that one can analyze the data in the application ? On this video, the speaker says, for example, that any deviation of 3 points is a sign that something could be corrected... Yes, but how - and how does one know one is three points off ? https://www.youtube.com/watch?v=l_i4PooLCPM

  • How does digital I/O simulation work

    Dug and looked but not finding how the digital I/O simulation of a board really works. (PCI-6229 in V8.0)
    A simple example works fine (DIs toggle as 8-bit ports count up) but when I try to go across more than one VI level the base VI reports the initial condition (all 0 or false) repeatedly. Make the demonstration pretty boring and hard to tell what's working and not.
    Tips, advice or references appreciated.

    Hello Glen,
    Every time a session (analog or digital) is started with a simulated board the data begins at an initial state.  For digital ports, all lines will be low.  You should be able to carry the current 'count' through multiple VI levels (sub VIs) without restarting at zero.
    If you open the example "Read Dig Port.vi" under Help>>Find Examples you can test a few cases to see how the simulated device reacts:
    1) If you run and stop, run and stop you will notice that each time the data begins at zero.
    2) If you move the start and place a stop task into the loop, the data will continue to count up (within a single run).  The data returns to zero when the task is cleared and a new task is created.
    3) Create a blank VI and place a DAQmx Read inside. Create controls/indicators for the task in, task out and data.  Add each of them to the connector pane and drag this VI as a sub-VI in the example. Place it in the loop between the read and the stop task (or the loop output if the stop is no longer there).  You will notice that the values returned are consecutive.  If the main VI reads 1, the sub VI will read 2, followed by 3 and 4 respectively in the following loop iteration.
    I am guessing the reset is somehow happening in your code.  If you cannot diagnose it with the above information, perhaps you could post a simplified version of your code which demonstrates the reset.
    Hopefully this helps,
    Jennifer O.

  • How does ECC 6.0 support Dynamic Data Exchange?

    Hello Friends,
      I am looking for material on how ECC 6.0 system supports Dynamic Data Exchange. Any leads would be great benefit to me.
    Thanks for Help.
    With Regards
    Vasu

    Hello friends,
    Any lead on this would be great help to me. Thanks for the Help.
    I know that SAP does support Dynamic Data Exchange. I have read in a book. But looking for how SAP supports DDE.
    Thanks for Help.
    With Regards

  • How to see Sales order confirmed ATP date in SNP?

    Dear experts,
    The sales orders shown in SNP are in the time bucket corresponding to the requested date by the customer.
    We would like instead to see the sales order in the time bucket corresponding to the ATP confirmed date,
    do you know if this is possible?
    Thanks
    E

    Hello Sandeep,
    I suppose that the sales order you're talking about was just created in the WebClient itself? Normally a sales order is replicated to R/3 when you save it. When you save it the sales order itself becomes locked ('distribution lock'). On the sales order screen, when you press save, is the order locked (are the fields read-only)?
    Normally, just saving the sales order should trigger a replication/distribution to R/3, you don't need any new buttons or anything other fancy
    Regards,
    Joost

  • How to read service order change document data

    Hi Experts,plz help me,my requirement is to read the service order change document data,for that one i need to read from cdhdr and cdpos tables,so what i need to do.in input parameters for cdhdr table in place of ibjectclass and objectid what i need to pass.plz help me.

    Same for CDHDR and CDPOS.
    OBJECTCLAS = 'ORDER'
    OBJECTID = combination of client(AUFK-MANDT) + Order category(AUFK-AUTYP) + Order number (AUFK-AUFNR)
    for example
    OBJECTCLAS = 'ORDER'
    OBJECTID = '10030004001108788'
    Chaiphon

  • After restoring my phone as New, how do I get my contacts and data back without the restrictions password

    I forgot my restrictions password so I restored my Iphone as a New phone.  Now, how do I get the contacts, apps and other data back on the Iphone? Can I restore my contacts & data without it also requiring a restrictions password again?

    Thanks for replying.  I had to do this process in order to get ICloud activated so I don't have it there.  I do have an external backup of the Itunes library, but it sounds like that would also restore the restriction password that I don't know.
    Why would ICloud be different (if I had backed up there?) Does it only save data?
    And It sounds like I need to keep my contacts in another source .... such as? ...  No, I don't use email much and my contacts arec the phone numbers I've captured in my phone.  After I have them backed up to ICloud, do I also need to make sure they are somewhere else to where I won't run into losing them again?
    appreciate your experience and help.

Maybe you are looking for