How does one copy tables, views, etc. from one database to another?

I do not have a strong DBA background but have been placed in charge of updating and migrating a number of tables and views across multiple databases.
For the future I need a better workflow than exporting and importing tables to/from .csv files and copy and pasting the SQL from each individual view.
Can somebody point me in the right direction? I'm happy to do some reading but have no idea where to look.

The Export utility provides a simple way for you to transfer data objects between Oracle databases, even if they reside on platforms with different hardware and software configurations.
When you run Export against an Oracle database, objects (such as tables) are extracted, followed by their related objects (such as indexes, comments, and grants), if any. The extracted data is written to an Export file.
To use Export, you must run the script catexp.sql or catalog.sql (which runs catexp.sql) after the database has been created,Ensure there is sufficient disk or tape storage to write the export file,Verify that you have the required access privileges.
Interactive Export Prompts
If you prefer to let Export prompt you for the value of each parameter, you can use the following syntax to start Export in interactive mode:
exp username/passwordExport will display commonly used parameters with a request for you to enter a value. This method exists for backward compatibility.
let me know if you have any further query!

Similar Messages

  • Copy Users/Permissions/objects from a database to another database

    Can anyone help me how to copy users, permissions, stored procedures, views, functions and all other objects from one database to another database.
     I need a SQL Script to get this job done. I cannot use backup restore or SSIS Package.

    There's also a transfer sqlserver objects task available in SSIS
    http://www.mssqltips.com/sqlservertip/2064/transfer-database-task-and-transfer-sql-server-objects-task-in-ssis/
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • How do you copy a Flash Workspace from on Mac to another?

    Hi There,
    Most of the other Adobe apps have a "Workspaces" directory located in the user preferences directory but I can't find any info on where Flash stores it's workspaces files.
    I need to copy and install the same workspace across multiple computers - does anyone know how to do this for Flash?
    Any help would be much appreciated.
    Cheers
    Ben

    Thanks Mate,
    On a Mac (CS5.5 on OX 10.6.8) it's a bit different and found it here: Users/username/Library/Application Support/Adobe/Flash CS5.5
    Previous versions are there also buy the look of it.
    Cheers
    Ben

  • How does one Component access another Component via Component Interface ?

    Folks,
    Hello. I have developed my project as 2 Components ( A and B). I have created a Search Record and a Component Interface for each Component.
    Now, a push button in a page in Component A needs to access all pages in Component B via its Component Interface. What are the steps to do for Component A to access Component B via their Component Interface ?
    Thanks.

    You could define the PeopleCode to make the Component Interface work on the FieldChange event of that push button you were talking about, but it would be better to put your PeopleCode in a Save event. To do that, you would use the DoSaveNow() function on the button's FieldChange event. Then, that would trigger a save, and you could put your code on the SavePostChange of any field or on the Component itself.
    Once you decide on an event, the easiest way to start is to open the blank PeopleCode window. Also, place the Component Interface in your project. Next, drag the Component Interface from the Project and drop it into your PeopleCode editor window. This will generate a bunch of PeopleCode that you can use as a starting place.
    The Component Interface allows you to remote control a component as if your code were a user sitting at the Browser. So, when coding the program that uses the Component Interface, you have to have that mindset. It helps me to open a browser and walk through what I want my code to do. Then, I code each step as I do it online.
    There is probably a lot more that you need to know, but is this a good starting point? Is it somewhat on track with what you were asking? Let me know were to go from here with more information.

  • I have 3G I Phone and just got new pc. Have run sync in I tunes but none of the songs, etc are being transferred from the Phone to the new computer. How does one accomplish this?

    I have a 3G I Phone and Just got a new PC. Have run a sync in I tunes but none of he songs, etc. in the I phone have transferred over. How does one accomplish this taks?

    Only iTunes purchases may copy over via File > Transfer Purchases - otherwise syncing is one way, from the computer to the device. To get the rest of your music/films etc onto the new computer you can copy the backup from your old computer onto the new one and then load them into iTunes

  • How can we copy table from one schema to other schema

    Hi,
    I have create one table in one schema and i want to copy it to other schema.How we can copy table from one schema to other schema

    Hi,
    You can try something like this :-
    SQL> CONNECT SYS/SYS123@SERVER AS SYSDBA
    Connected.
    SQL> CREATE USER TEST_1 IDENTIFIED BY TEST_1;
    User created.
    SQL> CREATE USER TEST_2 IDENTIFIED BY TEST_2;
    User created.
    SQL> GRANT CONNECT,RESOURCE,DBA TO TEST_1;
    Grant succeeded.
    SQL> GRANT CONNECT,RESOURCE,DBA TO TEST_2;
    Grant succeeded.
    SQL> CONNECT TEST_1/TEST_1@SERVER
    Connected.
    SQL> CREATE TABLE TEST_COPY ( TEST_COL NUMBER );
    Table created.
    SQL> INSERT INTO TEST_COPY VALUES ( 1 );
    1 row created.
    SQL> INSERT INTO TEST_COPY VALUES ( 2 );
    1 row created.
    SQL> COMMIT;
    Commit complete.
    SQL> GRANT ALL ON TEST_COPY TO TEST_2;
    Grant succeeded.
    SQL>  CONNECT TEST_2/TEST_2@SERVER
    Connected.
    SQL> CREATE TABLE TEST_COPY AS SELECT * FROM TEST_1.TEST_COPY;
    Table created.
    SQL>  SELECT * FROM TEST_COPY;
      TEST_COL
             1
             2Regards,
    Sandeep

  • Using family sharing, how does one view and download songs from a family member's collection in itunes?

    Using family sharing, how does one view and download songs from a family member's collection in itunes?

    When you click on your device you are presented with the pages
    Summary
    Info
    Apps
    Tones
    Music
    Movies
    TV shows
    Books
    Photos
    To remove Audiobooks depending on the type of Audiobook ie a series of mp3 files you will find under music and probably have to deselect the album name to remove it. I don't have any of these as I download from Audible or I use Audiobook Builder to stictch together mp3 files into m4b files. To find these Click on Books you will immediately see a section for books (in reality ebooks). Scroll down past that and you will see Audiobooks where you can select and deselect. Deselect the required Audiobooks and Click Sync

  • Simple: How to copy a Table from one Database to another?

    I already know how to do it by creating an identical table and then inserting the Data.
    Like so:
    SET IDENTITY_INSERT dByDtMinusC5 ON
    INSERT INTO [DB1]..T1 ([Id], [HbyD] , [K] )
    SELECT [Id], [[HbyD]]] ,[K] FROM [DB2]..T2
    As you can see I need to have T1 in order to copy T2 into DB1. Is there any way that I could auto create T1 and copy T2?
    There are so many forums in sql server Category, I hope I posted in the right one :0 . We need tag system for forums.   

    Hi Bhupinder,
    According to your description, you want to copy a table with Primary keys from one database to another database.
    As per my understanding, I think the best method is use Transfer SQL Server Objects Task in SQL Server Integration Services. The Transfer SQL Server Objects task transfers one or more types of objects in a SQL Server database between instances of SQL Server.
    Server roles, roles, and users from the specified database can be copied, as well as the permissions for the transferred objects. Indexes, Triggers, Full-text indexes, Primary keys, Foreign keys can also be copied.
    To use the Transfer SQL Server Objects Task, we should create a SQL Server Integration Services Project in SQL Server Data Tools, then drag a Transfer SQL Server Objects Task to Control Flow pane. Specify SourceConnection, SourceDatabase, DestinationConnection
    and DestinationDatabase for the Connection, select the table in the ObjectsToCopy category, then change CopyPrimaryKeys to True and the other corresponding properties in the task.
    References:
    Transfer SQL Server Objects Task
    Transfer SQL Server Objects Task in SSIS 2008 R2 With Example
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How to Move or Copy the Tables from One Database to Another Database ?

    HI,
          Can any one help me on this, How i can move or copy the tables from one database to another database in SQL server 2005 by using SQL query. Hope can anyone provide me the useful and valuable response.
    Thanks
    Gopi

    Hello,
    Maybe these links help you out
    http://www.microsoft.com/downloads/en/details.aspx?familyid=56E5B1C5-BF17-42E0-A410-371A838E570A&displaylang=en
    http://www.suite101.com/content/how-to-copy-a-sql-database-a193532
    Also, you can just detach the database make a copy and move it to the new server.

  • How does one simultaneously view two or more tables?

    When viewing a table, a tab is created. How does one create a second tab with which to view a second table?
    A related question - how does one enter and run two or more SQL statements to be viewed side-by-side (as in the above example with straight tables)?

    1) For table click the thumb tack an pin it. Then the next one will open in a new window.
    2) When you have 2 worksheets open drag the title bar to be on the left/right/top/bottom of that section. Then you'll have side-by-side worksheets.
    -kris

  • How does one copy an xygraph from a refnum?

    Sorry, normally this is straight forward enough to push through on my own.
    Purpose:
    Pass Refnum of XY graph to subvi -->
    Subvi's purpose : PRINT XYGRAPH to file/pdf/bmp, manipulate xy graph further (change back ground color to optomize for printing, optomize xy graph size for printing, move legend), perform some simple analysis on the data (rms, pkp etc)
    Problem Statements: 
    1 When using a refnum, writing any changes to the refnums property value will also change the parent i.e. the subvi xygraph.  This is not desired, so an exact copy of the xygraph must be made.  HOW DO YOU DO THIS?
    2 When using a refnum for an xygraph, how does one retrieve the xy values?  If the property node for value is selected, a variant is produced.  (which after careful examination I was still not able to make heads or tales of this particular variant) 
    p.s. A refnum is used because the xygraph already has formatting applied to its legend, plots, axis, etc.  A refnum passed to a subvi is the only way I know to pass all formating etc for the graph.
    p.p.s. I understand that there is an invoke node that will export an image, it contains certain limitations (such as requiring the subvi be opened, since it works by similar rules to a printscrn) that make it un applicable to this problem.
    -Regards
    eximo
    UofL Bioengineering M.S.
    Neuronetrix
    "I had rather be right than be president" -Henry Clay
    Solved!
    Go to Solution.

    eximo wrote:
    Problem Statements: 
    1 When using a refnum, writing any changes to the refnums property value will also change the parent i.e. the subvi xygraph.
    I don't understand this statement. Does the subVI have a graph also? Obviously, if you make changes to properties via the refnum, then the graph it's pointing to will change.
    p.p.s. I understand that there is an invoke node that will export an image, it contains certain limitations (such as requiring the subvi be opened, since it works by similar rules to a printscrn) that make it un applicable to this problem.
    Again, I don't understand. Where's the graph? On the main VI, or the subVI? If it's on the main VI, why would this be an issue? Wouldn't the main VI window be open?

  • How does one copy songs from an iPod nano to a new computer?

    How does one copy songs from an iPod nano to a new computer?

    You can't add any iOS to a Nano since it doesn't run iOS.
    For iTunes purchased music connect to your computer and in iTunes go to File > Transfer purchases.
    For non-iTunes music you will need 3rd party software. Assuming you have a Windows computer try Yamipod.

  • How to Copy (or) Transfer data in a BLOB Table From one database to another

    Dear Members,
    I want to Copy or Tranfer the data in a Table having BLOB Column from one database to another database.
    The Problem is that I am using COPY Command.
    COPY from scott/[email protected] to k5esk_ldb2/k5esk_ldb2@k5_ist.world CREATE BLOB_TABLE using select * from BLOB_TABLE;
    This is working only if the table is not having BLOB Column or CLOB columns.
    Is there any other way to do the same.
    Appreciate any Help.
    Regards
    Madhu K

    You could try using export/import utilities, but may run into tablespace issues if the tablespaces are not the same between the two databases. You can also try Data Pump using the REMAP_TABLESPACE variable if you tablespaces are different. You could also write your own export and import code...there are plenty of examples of that to copy.

  • How does one add tables to an existing universe using COM designer SDK.

    Morning All
    How does one add tables to an existing universe using COM designer SDK. I have tried:
    objUniverse.Tables.Add (strTable_Name)
    but get "Cannot create Table" error.
    Any ideas?
    Thanks in advance.
    Anita

    Hi Anita,
    -Use the Add method to add classes and objects to an existing universe using a VB 6 application.
    Adding a Class
    Definition: Function Add(Name As String) As Class
    Syntax: NameOfClassesVariable.Add
    Adding an Object Instance
    Definition:  Function Add(Name As String, [ClassName As String]) As Object
    Syntax: NameOfObjectsVariable.Add(name, [class])
    - name is the name of the object.
    - class is the name of the class containing the object. This parameter should be used in cases where more than one objects exist with the same name.
    Sample Visual Basic 6 Code
    Dim DesApp As Designer.Application
    'MODIFY AND EXPORT CLASSES AND OBJECTS OF AN EXISTING UNIVERSE
    Sub modify_and_export_universe()
    Dim DesUnv As Designer.Universe
    Dim DesCls As Designer.Class
    Dim DesObj As Designer.Object
    Dim DesDBCol As Designer.DBColumn
    Dim DBColName As String
    Set DesApp = New Designer.Application
    'Login to designer
    Call DesApp.LogonDialog
    'Make sure to log on with your administrator profile
    'e.g : "hostname","username", "password","Enterprise"
    'Make Designer application visible
    DesApp.Visible = True
    'This line disable warning messages from Designer
    DesApp.Interactive = False
    'to Open  locally  the universe you want to modify
    'Set DesUnv = DesApp.Universes.Open("club_uni")
    'Use OpenFromEnterprise method (Universes Class) to import a universe from the repository and opens it
    Set DesUnv = DesApp.Universes.OpenFromEnterprise("Universes", "club_uni", False)
    'Add a valid connection which already exists
    DesUnv.Connection = "club"
    'open the universe
    'Call DesApp.Universes.Open("club_universe")
    'Add the table Account and refresh the view in the main window
    Set DesTab = DesUnv.DBTables.Item("Customer").Insert
    DesUnv.ArrangeTables
    'Add a class
    Set DesCls = DesUnv.Classes.Add("Class MyCustomer")
    'Looping through all the fields of the DB Table Account
    For Each DesDBCol In DesUnv.DBTables.Item("Customer").DBColumns
    'Store name of the column
        DBColName = DesDBCol.Name 
         'Add an object to the class
        Set DesObj = DesCls.Objects.Add("Obj " & DBColName)
         'Affect a field to the object
        DesObj.Select = "Customer" & "." & DBColName
    Next
    'Save the existing universe with the same name club_uni or you can change
    DesUnv.SaveAs "club_uni"
    MsgBox "Universe created and saved Class MyCustomer has been added!!"
    'Close the universe
    UnvFullName = DesUnv.FullName
    MsgBox "The UniverseFilePath is " & UnvFullName
    'Close the universe
    DesUnv.Close
    'This line disable warning messages from Designer
    DesApp.Interactive = False
    'Export the universe to the CMS DB (to the last universe folder)
    'Make sure you save the universe before exporting it
    Call DesApp.Universes.Export("Universes", UnvFullName)
    MsgBox "This document has been exported successfully !!"
    'Close designer
    DesApp.Quit
    Set DesApp = Nothing
    End Sub
    Hope this helps.
    Regards,
    Deepti Bajpai

  • How does one prevent a column in a database from being visable to end users

    I have a password column I would like to hide by default from any one with query access. How does one do this?

    If you're on 10G you can use encryption.
    First create a wallet en create the master encryption key with:
    alter system set encryption key identified by "<secretpwd>";
    Then you can encrypt a column in a table with the command:
    alter table <tablename> modify <column> encrypt;
    If the wallet is open you can query the column. If the wallet is closed you cannot query the column ....
    Grtx

Maybe you are looking for