How does one empty an array during runtime with a front panel switch

I can 'empty array' from the front panel during runtime but I want to empty all arrays (20) from my vi with a front panel switch (see screenshot). I have used replace array subset and reshape array with no success. Any help would be appreciated
Attachments:
TempScan_screenshot.JPG ‏26 KB

Hmm... You can empty an array by reshaping it or by assigning a constant empty array - using local variables or properies of the original control (see attached example... hmmm... not the best one ). May be you can attach a part of your code to see what is better to do in the given case.
Attachments:
reset_table.vi ‏20 KB

Similar Messages

How does one transfer CS5 actions for use with CS6?

CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS. The "actions" folder in application support/adobe in my library is empty, and has always been so.
Only the CS6 default actions are located in the same folder for CS6.
I use imac i7, lion.
Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
Must i load each action into CS6, one at a time?
thanks to any and all.
vince

Re: how does one transfer CS5 actions for use with CS6?
On a Mac - There are multiple ways to do this. I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
1. You can load an action ONE AT TIME into your actions palette by:
     A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
     B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
     C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
2. TO MOVE MULTIPLE ACTION SETS AT ONCE
     A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
     B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
     C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace. I did this without an image open, I just dragged them onto the empty workspace. The actions should all appear immediately in the actions palette that is open.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
I hope this helps.
and I hope there are no typos.

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

How does one goes on building an Icon with the 'Look and Feel' of an Icon?

Hello everybody, I work as a Graphic Designer for a company that is asking me to create an Icon for a software that we own, I am having trouble as to how do i go building one, I use Illustrator and Photoshop but I am not sure how to give the Icon the 'Look and Feel' of an Icon, the colors look a bit different and so the 'texture' of my vector image. If anyone can explain me or point me to a good website that explains how should I go on building an icon so it looks like an Icon that will be great. I thank you in advance for any reply that you can give me regarding the subject.

don't know what you mean by "look and fell of an icon". You could go to vectortuts.com - it has lots of tutorials on the creation of different icons. Also check hicksdesign.co.uk for their presentations on icon concepts

How does one create the Process List (AdminUI) with the provided SDK API?

Currently we are developing a custom component for Adobe LiveCycle, which should offer the following service operation:
Fetch a list of schedulers (= long-lived processes with that loop with a Wait-operation) and check whether there are instances running for them
Input: none
Output: A list of (long-lived) process definitions together with a list of (running) process instances in XMLXML format could look like:
<processes>
     <process>
          <name>Mortage/Util/Scheduler A</name>
          <application>Mortage</application>
          <status>Active</status>
          <creationDate>2015-03-25T13:00</creationDate>
          <processInstances>
               <processInstance>
                    <id>12314</id>
                    <status>RUNNING</status>
                    <createdOn>2015-03-25T13:01</createdOn>
                    <modifiedOn>2015-03-25T13:02</modifiedOn>
                    <operations>
                         <operation>
                              <name>Set Value X</name>
                              <status>COMPLETE</status>
                              <createdOn>2015-03-25T13:01</createdOn>
                              <completedOn>2015-03-25T13:01</completedOn>
                         </operation>
                         <operation>
                              <name>Set Value X</name>
                              <status>STALLED</status>
                              <createdOn>2015-03-25T13:02</createdOn>
                              <completedOn>2015-03-25T13:02</completedOn>
                         </operation>
                    </operations>
               </processInstance>
               <processInstance>
                    <id>12315</id>
                    <status>RUNNING</status>
                    <createdOn>2015-03-25T13:02</createdOn>
                    <modifiedOn>2015-03-25T13:02</modifiedOn>
                    <operations>
                         <operation>
                              <name>Set Value X</name>
                              <status>COMPLETE</status>
                              <createdOn>2015-03-25T13:02</createdOn>
                              <completedOn>2015-03-25T13:02</completedOn>
                         </operation>
                         <operation>
                              <name>Set Value X</name>
                              <status>RUNNING</status>
                              <createdOn>2015-03-25T13:02</createdOn>
                              <completedOn></completedOn>
                         </operation>
                    </operations>
               </processInstance>
          </processInstances>
     </process>
     <process>
          <name>Mortage/Util/Scheduler B</name>
          <application>Mortage</application>
          <status>Active</status>
          <creationDate>2015-03-25T13:00</creationDate>
          <processInstances/>
     </process>
</processes>
Though I'm unable to retrieve these kind of processes, since the SDK API does not offer a way to fetch these kind of processes.
I tried the following Quick Start: http://help.adobe.com/en_US/livecycle/10.0/ProgramLC/WS624e3cba99b79e12e69a9941333732bac8- 7d27.html
Quick Start (EJB mode): Searching for Process Instances using the Java API
(and yes I went through all the possible options (other Quick Starts, API documentation))

Yes, removing the block diagram obscures the code so much that not even newer versions of LabVIEW can make sense of it.
I think under the hood it must be converting it to Perl.
Spoiler (Highlight to read)
If you believe this and have lots of money please contact me with your credit card info
If you believe this and have lots of money please contact me with your credit card info
=====================
LabVIEW 2012

How does one migrate play lists to another account

Question how does one migrate or copy a list with out assocaiting with another account, ex my play list on this account I like to put on my other account since I want to keep my music from FB(this account is linked through sign up, where as my other account don't). I know how to copy the list url and do know how to drag and drop to desk top, both assocaite with this account Why ask this question when looking at when something is added or who added it it gives an account number(and that account was deleted for a reason and list migrated to this account). Is there a possibility of taking my lists with out account number or would that be impossible? Note I use 8.1 for Windows

Hello there and welcome to the community,
1) on the old account : copy the Playlist Link (Right click on the title)
2) Paste it on your web browser
3) open your new account.
4) Play the playlist in your browser
5) Playlist will open also in your Spotify desktop
6) Subscribe to the playlist. That will save the playlist on the folder PLAYLISTS (on left side)
7) Always on your new account, create a new playlist with the same title if you want
8) Copy all the tracks from the old playlist to the new one
9) Delete the old playlist
10) Now you have a playlist with your new user name as creator

How does one remove temporary files from Safari? A friend logged on to her Facebook account using my iMac. Now I can't remove her e-mail address from Facebook. It was suggested to me that I try clearing temporary files from Safari but I can't find

How does one remove temporary files from Safari? A friend logged on to her Facebook account using my iMac running Mac OSX 10.7.5 and Safari 6.1.6. Now I can't remove her e-mail address from my computer. When I open Facebook her address shows in the user button. I do not have a Facebook account. It was suggested to me that I try clearing temporary files from Safari but I can't find anything that tells me how to do this. Are temporary files the same as the cache? It also was suggested that I try clearing Safari cache. How do I do that?

Check Safari/Preferences/Passwords to see if the Facebook account is there. If so, select it and remove it. If you are still having problems, Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. If that doesn't work, Safari/Reset Safari.

How to update cgicmd.dat file during runtime?

I'd like to know how do update cgicmd.dat file during runtime. For example, I run a report one.jsp as
http://<machine>:<port>/reports/rwservlet?one.jsp&USERID=uid/pwd@db&DESTYPE=cache&mode=bitmap&desformat=htmlcss
within this report there is a hyperlink to open another report named two.jsp.
before creating this hyperlink, I'd like to update cgicmd.dat file with passed in userID, pwd, and connection, so two.jsp can use this key for userinfo
so I can create hyperlink as follows
srw.set_hyperlink('/reports/rwservlet?report=two.jsp'||
'&cmdkey=userinfo&DESTYPE=cache&mode=bitmap&desformat=htmlcss');
Thanks

To my knowledge the cgicmd.dat is only read when the OC4J starts, so you would have to come up with another solution. Using Single-Sign-On (SSO) is quite a good idea, and it's there for cases like this.
Regards,
Martin Malmstrom

How does one avoid co-channel interference on dot11a solutions in EMEA ?

When deploying wireless access points on dot11b/g, co-channel interference can be minimized by appropriate manual choice of channel numbers across the physical site.
In the US, the same methodology applies for dot11a solutions, where manual frequency selection for an AP is an option.
However, Here in EMEA, with compulsory DFS for dot11a, there appears to be no manual control at all on channel selection.
The default behaviour as I understand it - is for an AP to pick a random channel during interface initialization, and then if no radar detected, continue to use that channel.
(This has hit us on one solution, where four APs in neighbouring rooms at a client site selected the same channel on startup - causing significant co-channel interference!)
So how does one avoid co-channel interference on dot11a solutions in EMEA ?
Do wireless LAN controllers (with thin APs) have an option to preselect dot11a channels before the DFS listen check ? (Rather than just a random choice)
The IDEAL solution, would be for Cisco to add the following option to its IOS syntax :-
Interface dot11radio1
Dfs band 2 3 4 block
Channel 36 preferred
Adding a preferred keyword option would allow co-channel interference to be avoided by design, whilst still allowing a DFS check to prevent wireless interference.
If I wanted to pursue the inclusion of this new option into AP IOS, what would be the best method in tackling this?

I don't have an answer for you but I do have a question. I have been researching the issue of which channels in the 2.4 band are permitted according to law in the various countries in Europe. We have offices in Germany, France, Spain, Netherlands and England and I was wondering which channels we are permitted to use. Do you know or could you point me to a document I could read?

How does one email a video from iPhoto

how does one email a video from iPhoto

One doesn't.
Simply, sharing video via email is not advisable.
Many email services have an attachment limit of 20mb and some a limit of 10mb. As emails are sent through an array of relays, the effective limit is the smallest file size allowed on any of the relays. That means that video is rarely suitable for emailing.
Then there's the whole issue of Codecs and not all machines will have the codecs to play all videos. Plus, folks with slower connections can find it very inconvenient to download large video files.
Finally, sharing video from iPhoto via email is not supported. All that gets you is the Movie thumbnail. If you feel you must share via email then you'll need to export the video first, and attach that. Use the File -> Export command and set the kind to Original.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.
Other than that your options include:
Upload it to a sharing site like YouTube or Vimeo and email a link - these will allow the recipient to view the material online. That will avoid the codec issues mentioned, and the person can still download the video file if they wish.
Upload it to sharing services like Dropbox or YouSendIt and email a link. This will require that they download the material to their machines to view.
Regards
TD

Are Hyper-V 2012R2 checkpoints Application data consistent? How does it use now VSS during checkpoints creation?

Are Hyper-V 2012R2 checkpoints Application data consistent? How does it now use VSS during checkpoints creation?
I read the article http://www.aidanfinn.com/?p=15759 that now WS2012 R2 Hyper-V changed how it performs backups.
That is unofficial info. I can't find any info about that in msdn, but that is critical.That is about data integrity.
Is this true?
Does this mean that we may not use VSS in Hyper V server backup application any more? Will Hyper-V 2012R2 host (WM is running) when i am creating a checkpoint,
call VSS to only flush VSS Writers during this process for target child VM to make application data crash consistent state? And the volume shadow copy wn't be used? Only vhdx +avhdx witch will merged later, right?

There are a couple levels to this.
If VSS is there, VSS is used (just as before). But there is a bit more happening around it than simply placing the VM in a saved state.
However, if VSS is not there (in the VM) then the behavior is slightly different (this is really to support Linux VMs that don't support VSS) - and still achieve a good VM backup.
In another blog post I see it described this way:
Online backup for Linux VMs – even though there’s no VSS support in Linux, the Microsoft guys have managed to find a way to create consistent backups of running Linux VMs, by doing what’s essentially called a “filesystem freeze” by briefly stopping
all disk I/O inside the VM until the host creates a VSS snapshot of the VM on the host (thus getting a file-consistent backup with zero downtime) – once the snapshot is done, disk I/O is resumed and then the actual file copy process starts
Flemming shows the process here:
http://flemmingriis.com/changes-in-hyper-v-backup-in-2012-r2/
If you are calling VSS to perform a backup - nothing has changed. The only thing that has changed is the 'how it happens' , not the 'what you get' and 'how you call it'
This way if you call VSS to perform a backup - you get a good one, no matter the OS in the VM, nor its support for VSS.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

HT1338 How does one uninstall Garageband and other things?

How does one uninstall Garageband and other things on the Macbook air?

Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
    1. AppZapper
    2. AppDelete
    3. Automaton
    4. Hazel
    5. AppCleaner
    6. CleanApp
    7. iTrash
    8. Amnesia
    9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.

In Pages 5 when I try to attach a pages document to an email it gives me 2 folders and 4 files ??? How does one email a pages document.

How does one email a pages document? In pages 5 when I try to attach a pages document to a gmail email it gives me 2 folders and 4 other files to choose from.

Sounds like you are using Gmail.
Pages 5 uses a zipped package of files as its format. 3rd party servers don't understand the format and show it as the component parts.
Use Mail toenail the file or zip the .pages document before sending.
Peter

How does one change the font size for folders and/or file lists in the Bookmarks Library?

How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
With regard to font size,
1. there is no “Edit Bookmarks” or like option to edit the list in this version
2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
3. expanding the browser window has no effect on font size
4. “Preferences” settings for font size has no effect in that window either, including advanced settings
5. “Help” offers none that I can find.
Can any of you Help?!?

Maybe this extension helps:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

How does one use an external microphone with the internal camera?

I want to use the internal camera because I don't have anything better but I want to use an external mic to record video and sound simultaneously, for a video blog. How does one accomplish this? I'm getting no help from the manual.

Try this. Connect your external mic, either through the audio line in port or, into a USB port if it is a USB mic and then go to System Preferences under the Apple and select the Sound icon under Hardware. Click on your mic shown in the list of input devices.
Hope that works for you.
Forest

How does one empty an array during runtime with a front panel switch

Similar Messages

Maybe you are looking for