How does Organizer differ from Bridge

I used to use PSE6 until it got lost in a HD crash. I just downloads PSE9 trial and see that it has something called Organizer rather than Bridge. I've tried importing all of my photos into Organizer, but am unsure about what this is supposed to accomplish.
I notice that Organizer didn't appear to import any of the categories and sub-categories that I had set up in Bridge, but perhaps I did something wrong.
Anyway, "importing" organizer felt a lot like importing into IPhoto, which is something I tried a while ago but rejected because I couldn't get anyone to explain how I could maintain my master file outside of the iPhoto repository. I want to keep the files that I edit in separate files because I have going on 100 gig of them and want to be able to back them up rationally, which is not something I could figure out how to do with a 100gig iPhoto repository file.
Bridge just worked with the files, which was very good, except for searching for keywords across the entire set of photos.
I was hoping that Organizer would keep a central repository of metadata but let me edit with the original files.
So, is that how it works?
Two other points/questions: 1) The Bridge UI would could be set up to display a nice big image of the file that I had selected. That is, small versions of the images were displayed on the left, while the chosen image was displayed in a much larger form at the upper right. Can Organizer do this? I haven't found any way to get it to do this. 2) I've recently tried to download a batch of new photos onto my HD into their new timestamped directories. I had to tell Organizer to import the new directories (which is fine), but Organizer would start into a never-ending stream of thumbnail generation, preventing me from doing anything else. I can't see how this can be expected, as it makes the software utterly unusable. What am I doint wrong?
Thanks, --sw

Persona is a login authentication service. It is something a website has to implement. It is totally different than lastpass, which is simply a password storage service.
Are you talking about Sync maybe? Sync is a way for you to store and synchronize your Firefox data (including but not limited to passwords) across multiple devices. [[How do I set up Firefox Sync?]] In that respect it is equivalent to lastpass.

Similar Messages

What is Navigate and how does it differ from Froyo to Gingerbread and honeycomb?

Navigate does not seem to appear in Application Management for Froyo, Gingerbread or Honeycomb.
So What is it? And, Where is it located?
How do I see the Release?
DroidX Froyo has Navigate that updated to include Navigation with Public Transportation option.
The DroidX with Gingerbread does not appear to have that update. Neither does the Navigate on my Xoom running Honeycomb 3.2
System update on all three show all up to date.
If Navigate is just a module in Maps and Maps is at the same level on all devices, how can I initiate the update?
Thank you for your assistance

Thanks to all community members for your input. jmccoy70, I understand your concern with wanting to be able to access the Navigate app that's on your device with Froyo Os like the devices with Gingerbread and Honeycomb. At this time, this update is not available to download so t hat you receive this update.
Navigate is apart of Google Maps. In the apps list, there is a blue triangle that points upward that launches Navigate. It may have to be downloaded on the tablet from the market.

How does ThreadStatus differ from ProcessStatus in class GPIBStatus?

When working with the GPIBStatus class of the NationalInstruments.NI4882 namespace there is a process status and a thread status. If I do not use notify, begin read, or begin write would there be a difference between the two values? Also, Could someone suggest some good reading material on writing multithreaded GPIB applications with Visual Studio dotNET and Measurement Studio.

The article "Developing Multithreaded GPIB Applications in Windows NT and Windows 95" on NI developer zone has good material on developing multithreaded GPIB applications. You should become familiar with this and also the .NET thread functions.
To answer your original question, ThreadStatus contains the GPIB status value for that thread. It is equivalent to calling the GPIB function ThreadIbsta(). ProcessStatus returns the last status for that particular process.
As an example if you had a multithreaded program with two threads; thread A and thread B and thread A called a GPIB call that returned with a mask of Complete, ControllerInCharge, and Attention, then spawned thread B with called a GPIB call that returned with a mask of Complete. Afte
r these calls occurred if you called ThreadStatus from Thread A the value would be Complete, ControllerInCharge, and Attention. If you called ThreadStatus from process B the value would be Complete. If you called Process status from either thread the value would be Complete.

How does Persona differ from using LastPast for site passwords?

I can't tell if Persona is an improvement or just another way to accomplish the same thing.

Persona is a login authentication service. It is something a website has to implement. It is totally different than lastpass, which is simply a password storage service.
Are you talking about Sync maybe? Sync is a way for you to store and synchronize your Firefox data (including but not limited to passwords) across multiple devices. [[How do I set up Firefox Sync?]] In that respect it is equivalent to lastpass.

What is a "frame"? ("Save Frame As...") How does it differ from "Save Page As..."?

This is under the File menu. I am using Mac Leopard.

See the image with Frame 1, 2, &3 just below the code here: <br />
http://www.w3.org/TR/html4/present/frames.html#h-16.1
Frames are a method of displaying different "pages" of information in the same webpage. '''Save Frame As...''' will save only the Frame that is in "focus" or the Frame that the cursor was last clicked on. If you have a multi-button mouse, when you right-click you will see more "Frame" menu items, like '''Show This Frame Only...'''.
"Frames" aren't used much any more, I-Frames and new CSS coding has replaced Frames to a large degree.

HT3529 how does iMessage differ from standard messages & how do I get it to work?

I have got an iPhone 4S as well as an iPad 1 & have them both linked with iCloud. I think I have set everything correctly for iMessage but don't understand when iMessage kicks in instead of standard SMS/MMS.
I was also under the impression that my SMS messages would be stored in iCloud so I could store them on my MacBook so I never lose them but that isn't working either.
Can anyone help?

http://support.apple.com/kb/HT3529 tells you what it is.
Refer to your user manual to setup iMessage here: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Company currency does not differ from company code currency

Hi Everyone,
I am a newbie in SAP FI. Forgive me if this is a rpet pos. I could not find an answer using search.
Here is my problem:
I defined a compay with currecny as USD. I defned two company codes one with currency USD and the other
with currency INR.
I assigned compay code 1 (with USD as currency) to cmpany successfully.
However, when I tr t assign the secnd company ( wih INR currency)it gives me the following error:
"Company currency does not differ from company code currency".
How do I solv this problem.
Thaks,
Cheruvu

hi
when you defined your company currency as USD and Company code currency is also USD therefore it is not shown any warning but second company code currency taken as INR system expressing warning since company currency and company code currency differs as company stands for group for consolidation point of view
therefore it is only warning not error you can just enter and further configure nothing will be adverse
regards
srinivask

How To import collections from Bridge cs6 To Bridge CC

How To import collection from Bridge cs6 To Bridge CC??
thx

How To import collection from Bridge cs6 To Bridge CC??
A collection is a bunch of aliases to the original files in their original place. If you have upgraded to CC on the same machine you can use the same collection, on a different machine it will possible not find the correct location again.
On a Mac the path for the saved collections is : User / library/ application Support / Adobe/ BridgeCS6 / collections. Inhere are the saved collections showing the names you gave them. You can copy these collection files to the same location in Bridge CC.
If you have a different machine you best first choose the collection and add a keyword with the name of the collection to all the files in this particular collection so you can use the find command to easily recreate the collection on your new machine.
Maybe someone with more knowledge of Windows can show you the correct path but it should be something similar as on a Mac.

How to Transfer Colletions from Bridge CS5 to Bridge CS6?

How to Transfer collections from Bridge in CS5 to CS6? I tried to copy my collections to the new Bridge but for some reason I do not see an option. I tried putting on Keywords on my collections so that I can pull them up again but for some reason it won't write keywords anymore? What is the best approach to transfer collections. Thanks. KC

What is the best approach to transfer collections. Thanks. KC
On a Mac both the keyword file and collections are stored in the user library (by default hidden in OSX lion) in the user account.
The path on Mac:
user / library / Application Support / Adobe. Inhere you should see both Bridge CS5 and bridge CS6 if you have upgraded while the older system is still on your system.
In Bridge CS5 you see several folders and files. The keyword file that has all your in CS5 created keywords is called 'Adobe Bridge Keywords.xml' and the folder called Collections should have all your saved collections in it.
You can copy the keyword file to the same location in CS6 and also the content of the collections folder can be copied to the CS6 folder.
After restarting Bridge CS6 they should reflect the correct collections and keywords.
Don't know the path on Windows but it might be similar.

How does one update from iwork '09?

I followed blog advice to download iwork trial and try to upload from there, but no dice. how does one update from iwork /'09???

With all due respect ... I do not see how one can change the Subtemplate value from Yes to No. When I query the offending Template, the Subtemplate column is not displayed in bold, indicating to me that it can not be updated. Clicking on Edit Configuration, doe not provide an ability to change the value either.
As best I can determine, one needs to 1) query up the template
2) download the rtf file(s)
3) end date the template
4) create a new template and then set the Subtemplate value to No.
And the same steps appear to be required in order to add or update a template Description.
Which raises the question, Why can this not be done by editing the configuration?

Why does psd-file from Bridge start as smart object in Photoshop?

Anybody has a solution?
Instead of opening the psd-file normally from bridge into photoshop the file converts to smart object.
I used to work with CS3 where double-clicking in Bridge on a psd-file would open it in Photoshop. Now, when I double click in Bridge (CS6) it opens a "quick time pro" file, which I definitely don't want. When I use the right mouse to "place in Photoshop" it does so, but then automatically converts the file into a smart object, which I don't want either. What need I do to open a psd-file in Bridge as normal psd-file in Photoshop (and to eliminate the silly "quick time pro standard" when double-clicking in Bridge?
Thanks in advance for help.
EVAMLG0507
I have already posted the question in Photoshop. No solution yet.

Hi Curt Y
sorry, it was getting somewhat late last night (I live in Switzerland) and after having spent already quite some hours on this problems I wanted to dedicate the evening to more pleasant things.
when I go - in Photoshop - to > edit > preferences I only get the following window. there's nowhere "file type associations" (only in Bridge preferences), and I can't navigate anywhere to > Program Files > Adobe > Adobe PS 64bit > Photoshop exe. Do you have an idea why this could be? Thanks in advance for your support.

How to keep Keywords from Bridge when importing photos

I am moving images from Bridge on my old computer to LR on my new computer. The photo comes in fine but the IPTC Core fields are not there.
How do I fix this?
Thanks!

I’ve never done it but I think the only way to do it is to use the export command to send files to the desktop or an external hard drive before moving to your new computer. Try selecting a test batch of images in Bridge and using:
File >> Export
After selecting the destination, click on the Image Options tab and choose all metadata.

HT4436 how does one print from cloudon?

I can work on the excel and word programs but can not print from it.
how does on do this?

From an iOS device you need either
1) an airprint printer -
http://support.apple.com/kb/HT4356?viewlocale=en_US&locale=en_US
2) If yours is not listed, then the only way to print is using a computer - for example, on a Mac, get Printopia for the mac. Then your ipad can print using airprint, Printopia intercepts the job and routes it to a printer that the Mac can connect go.

Looking for a strait forword answer about the CS5.5 Upgrade. How does this differ with the CS5?

I just got Flash Professional CS5 3 months ago. Now I see a latest Flash Software (CS5.5) out but the upgrade is costly. I'm going threw Creative Edge to learn
how to be more familaer with what projects I can do. As I was going threw a new book threw creative edge, I downloaded the materal so I can understand what it is on what it is trying to teach me. As I opened it, My Flash CS5 gave me a prompt that the file was created with Flash CS5.5 and it was not able to open it. Is this upgrade mandatory for the adobe users?

You definitely need to learn to be patient when it comes to using forums - you could barely go an hour without making a remark like that?!
These are user-to-user forums. Adobe employees do not visit here often. If you want information about how CS5.5 differs from CS5, then do what anyone would do and look up the product description via the Adobe Products section to see what's new about CS5.5.
Upgrades are not mandatory for anyone.

How does playing track from a server mounted drive look to IT department

How does playing a file in iTunes that resides on a mounted server drive look to IT department. I'd like to play some tracks I saved on our Xserve. It is our (Marketing) server and I am the Admin, but I was curious how the traffic looks to IT. This server is attached to the company wide network but only Marketing has access. Will playing the file show up to IT as streaming audio or just appear as file activity?

It will just appear as file activity.

How does Organizer differ from Bridge

Similar Messages

Maybe you are looking for