How Does the Waveform Chart Allocate Memory in LabVIEW?

I am not understanding the Memory allocation concept in chart. When it will be happened? If it is in run time, I am getting the exception before running the application itself. Can you help me on this?

> I am not understanding the Memory allocation concept in chart. When it
> will be happened? If it is in run time, I am getting the exception
> before running the application itself. Can you help me on this?
This depends a bit on the datatype. For all charts except those with
the waveform datatype wired up, all memory is preallocated when the VI
loads or compiles. Some datatypes, like the 2D array can add plots at
runtime, and obviously the chart history will need to reallocate when
that occurs.
If the chart has a waveform or array of waveforms wired to it. It has no
way of knowing how many points are in a waveform and will need to
allocate them as they arrive. It has a top array of waveforms that is
preallocated.
I answered your question a
bout the chart, but I'm not sure if this is
what is causing your problem. If you are setting the chart history to a
very large number, you might try smaller numbers and see if that is part
of the problem. Otherwise it might be some other part of your diagram.
Greg McKaskle

Similar Messages

  • Why does AI Read(Async​hronous).v​i cause the waveform chart to not display any history ?

    I trying to create a strip chart for 16 channels that will require displaying 10-20 minutes of data.It also starts a separate vi to set gains and offsets while displaying the data. Using AI Read.vi uses 100% of the CPU so the second vi does not run. But using AI Read (async).vi allows the second vi to run, but causes the waveform chart to not display the history? I'm using LabView version 6.0.2.

    Hi Waynes World,
    I have a couple of questions that may help us solve this issue...
    1) If you are modifying one of our example programs, which one did you start with?
    2) What kind of analog input are you doing? Buffered? Finite or continuous?
    3) Have you tried increasing the buffer size of the strip chart? This will allow the chart to store more data in it.
    4) When you use the Async VI, and when you are using the other, can you describe how the strip chart is showing the data... does the data in the chart keep growing and growing... or does it clear itself and start over when the pine reaches the end?
    I think this issue is rooted in how the buffer is being used with the two different AI Reads and how it returns data to the chart.
    On a side note, have you considered upgrading to a newer version of LabVIEW? Our latest versions of LabVIEW come with many new features and it is signifigantly easier to use.

  • How can i print out the waveform chart?

      hello everybody,
    how can i print out the "waveform chart". can i do it just push the button. ( example; stop button is stop the program etc..)
    i checked the NI examples but i can't understand. i'm new to the Labview.
    pls help me.
    i added the my program
    look forward your reply
    regards from turkey...
    Message Edited by hknmkt on 05-29-2008 04:15 AM
    Attachments:
    29.05.2008_11.vi ‏37 KB

        hi jim,
    i tried the program but it's not running. When i run the program, it's print out without run the program
    i added the printed file.
    look forward your reply
    hakan
    Attachments:
    error8.JPG ‏8 KB

  • How to take the print out of the entire data from the waveform chart

    i am using cont acq to spreadsheet file.vi to acquire data from a number of channels. this vi also plots the acquired data on the waveform chart. i want to take the print out of the entire data. how can i do it ?
    also how can i take print out of the data between given interval??
    please reply me
    thank you

    There are a number of different ways of achieving your goal. Depending on which version of LabVIEW you have and which development environment, the Report Generation Toolkit is a very powerful tool. Attached is an example that prints the acquired data without the use of additional toolkits.
    Jonathan Hildyard
    Applications Engineer
    National Instruments
    Attachments:
    DAQ_with_Print.llb ‏115 KB

  • How to keep the waveform chart updated when changing states in state machine/

    Hello Everyone,
                           Can anyone please sugest me how to keep the waveform chart updated even if I am changing the states in a state machine??
    I am having analog inputs on the waveform chart...
    Thanks in advance...
    Now on LabVIEW 10.0 on Win7

    hello guys,
                    thanks a lot for the suggestions, here is the attached code... please follow the following steps to run it..
    ONce you hit play,press either Start Main/Cyl UP button on the front panel,
    once you start observing the waveforms, you can press the Cyl_Dwn button on the front panel... You can observe that the state changes to Start Counter state,
    and the waveform chart also stops updating... I would like both the waveform charts to conitnuously show the data even if the state is changed....
    Now on LabVIEW 10.0 on Win7
    Attachments:
    Soda Vending MAchine.vi ‏212 KB

  • How to set waveform chart to start data since beginning of run

    Solved!
    Go to Solution.
    Attachments:
    TCs.vi ‏106 KB

    You need to check the update mode of your chart.
    Strip Chart—Shows running data continuously scrolling from left to right across the chart with old data on the left and new data on the right. A strip chart is similar to a paper tape strip chart recorder. Strip Chart is the default update mode.
    Scope Chart—Shows one item of data, such as a pulse or wave, scrolling partway across the chart from left to right. For each new value, the chart plots the value to the right of the last value. When the plot reaches the right border of the plotting area, LabVIEW erases the plot and begins plotting again from the left border. The retracing display of a scope chart is similar to an oscilloscope.
    Sweep Chart—Works similarly to a scope chart except it shows the old data on the right and the new data on the left separated by a vertical line. LabVIEW does not erase the plot in a sweep chart when the plot reaches the right border of the plotting area. A sweep chart is similar to an EKG display.
    From the help menu:
    The waveform chart maintains a history of data, or buffer, from previous updates. Right-click the chart and select Chart History Length from the shortcut menu to configure the buffer.  The default chart history length for a waveform chart is 1,024 data points. The frequency at which you send data to the chart determines how often the chart redraws.
    Attachments:
    resp2.jpg ‏36 KB

  • How to pass waveform chart in a loop in a sub vi to calling vi

    It has been awhile since I made my last application.  It has escaped me how to run a VI with a loop in it as a sub VI and still pass the waveform chart up to the calling VI.  I am trying to use the Bridge Continuous example as a sub VI and pass that waveform chart up to the calling VI that selects which load cells to monitor.  But when i run the calling VI it stops at the sub VI with a green arrow.

    Your acquisition needs to run in parallel with your main loop.  You should also use a queue or notifier to send that parallel process commands (like to stop).  I would use a User Event to send the data from your aquisition to your main loop's event structure.  You can then update the chart inside of the event structure.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • How does the Mac App Store work?!

    Hey guys i recently posted this quesiton in a different area of the community but instead of being helped was just ridiculed for posting in the wrong place... +1 for helpfulness guys :/ lol Anyways... ive been told to ask in the development section.. I have a $9.99 app and it was sitting at 10th place in the top grossing apps a few weeks ago on the UK app store, now I noticed in the morning that it was ahead of an app which was 49.99 so i presumed that I must have sold at least 5 or 6 to be ahead of him (my idea of top grossing is quantity x price) but when itunesconnect released their reports in the afternoon it turned out that i'd only sold 1 copy.. so what im asking is basically how does the top grossing section work? and how regularly does it update? is it live? daily? etc
    Thanks in advance!

    Your rank is better than the other app because you've made a sale while they've made none. When you make a sale, you jump in the charts, and after that you slowly go down if you don't make another sale. In other words, the bottom of the charts has many apps that didn't make any sale recently. I've also noticed that if you make some sales in other countries than the current chart, that'll very slightly improve your rank.

  • How does the SSAS storage mode (MOLAP/ROLAP/HOLAP) fits into the BI Semantic Model?

    Hi there,
    I've been reading some posts and whitepapers about the BI Semantic Model (BISM) but there is something that is a bit unclear to me.
    If we imagine Venn diagrams, how does the concept of BISM fits along the storage modes, such as MOLAP, HOLAP and ROLAP? How does these two concepts work together?
    Are they completely independent from the other, or do they overlap somehow? Can I have 
    Regards,
    P.

    BISM is just a marketing term referring to any type of Analysis Services model. What is more important is Multidimensional models can have three storage modes: MOLAP, ROLAP, or HOLAP. Tabular models can have two storage modes: In-Memory or DirectQuery.
    http://artisconsulting.com/Blogs/GregGalloway

  • How does the Web AS Cache refresh work?

    Hi,
    How does the Web AS Cache refresh work?
    I search a guide for Information about this.
    Can anybody help me?
    Thanks.
    Regards.
    Stefan

    hi stefan...
    Cache is nothing but a buffer kinda where all the recently accessed data r stored.
    so sometimes even after making changes u access the page the old data/page is displayed...
    so Web AS cache works as a normal refresh deleting all the recently accessed data/pages...
    it clears or frees ur memory so tht no irrelevant data is obtained...
    for further details, refer to google search... " Web AS Cache Refresh in SAP-Xi"
    /message/514186#514186 [original link is broken] (dont go at the topic name)
    regards..
    vishal
    Message was edited by: vishal prabhakar

  • How does the Java card simulator work? and other misc questions

    First, I have a class inherited from Applet. Okay, I did that.
    How do I convert this class to a CAP file? I mean I have a class file which is compiled by javac, do I use this file to convert into a CAP file? What is an AID? Do I make up this AID?
    In this .scr file (APDU Script), I understand the first 4 bytes, it means to create an Applet, but what about the rest? I know there are some intermixes of lengths and AIDs, I just can't decipher this.
    // create wallet applet
    0x80 0xB8 0x00 0x00 0x14 0x0a 0xa0 0x0 0x0 0x0 0x62 0x3 0x1 0xc 0x6 0x1 0x08 0 0 0x05 0x01 0x02 0x03 0x04 0x05 0x7F;
    And here comes the main question?
    How does the simulator work? How do I generate the data that mimics what the card reader reads?
    Thanks
    Jack

    At first blush,
    I have these when executing the RMIPurse sample according to the user guide
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported type long of field interfaceHash.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type long of method dispatch.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.SkeletonMismatchException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported type long of field interfaceHash.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported type long of field serialVersionUID.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode pop in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode pop in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of method class$.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method forName(java.lang.String) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported return type String of invoked method getMessage() of class java.lang.Throwable.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.lang.NoClassDefFoundError.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.At the first command prompt, I typed cref -o demoee
    and at the next command prompt, I typed ant all, and I got those error messages.
    Thanks, you are so nice to help :)
    Jack

  • How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

    how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

    To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry.  If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

  • How do I move a back up to another external drive and how does the Mac Book then find the new back up?

    how do I move a back up to another external drive and how does the Mac Book then find the new back up?
    I currently have the back up on a Time Capsule, I want to move it from the Time Capsule to another external hard drive.

    Did you read the link to the Pondidni website?  You will have to select the Time Machine HDD for the new MBP and the old one in System Preferences>Time Machine:
    Ciao.

  • How does the remote object connect to the correct host

    i have had a small doubt on how the remote reference manages to find the correct host to call the subsequent methods after a sucessful lookup.
    given a rebind or bind to the registry, the registry only stores the alias and the remote reference, now imagine a client calling a lookup on the registry would only get the remote reference, and not in which machine the remote object is found.
    what i wanted to know is how does the client or atleast the remote reference returned by the registry correctly connects to the machine where the remote object is located. i dont think its stored in the stub bcos the stub is a complie time stuff.
    i would be pleased to have a comprehensive answer for this.

    The membership in the group communication framework is always accurate and upto date.Up to date to the moment when you check. Not up to date to the moment when you make the RMI call.
    i could basically chk if this ip is available in the membership list.Complete waste of time. It doesn't matter what you check ahead of time, you are still trying to predict the future.
    And you still have to deal with ConnectException etc from the actual remote method call. And the way you will deal with that in your situation is exactly the same as what you were going to do if your ahead-of-time check failed.
    So just catch the exception(s) and deal with the problem there.

  • How does the GR processing time affect the scheduling of the process order & the latest start date in the operation.

    Hi
    Can anyone explain  how does the GR processing time affect the scheduling of the process order & the latest start date in the operation overview.

    Hi
    GR processing time means number of workdays required after receiving the material in storage.
    Check this link:GR Processing time
    Regards,
    Anupam Sharma

Maybe you are looking for

  • Can't import videos to iTunes library...

    I can't get videos into my iTunes library. I've done it once before, but my computer isn't letting me drag the file from the Movie folder on my computer to the library on iTunes. Does it make a difference which format the movie is? Because it's .avi,

  • Spry not working in IE

    I'm trying to create a page that uses a html table to make a dataset that I am able to sort. It works perfect in Firefox but doesn't work at all in IE. I am hoping someone will have some suggestions to what I could be doing wrong?

  • How long of a movie can i make using imovie?

    I am planning on making an hour, hour and a half movie next year for a film competition. Can i do that using a macbook and imovie? would i need to get an external harddrive or new software? any help will be appriciated

  • HR Extraction Info Objects

    Hello Guys, Presently i am working on Appraisal Infoset. i need some information regarding recognising some objects. please let me know what object are used in Businnes Content. 1 Performance Review Date 2 Next Performance Review Date 3 HRP Retention

  • Third party imaging question

    Is there a way to use the lite touch installations using the deploymentshare? I want to do this so that I can follow the MS deployment docs for adding drivers and using the unattended installs without having to rebuild images. Has anyone thought of o