How efective set price to purchase order

I have created purchase order with 600 lines where isnt set price for each item.
Now I want through UI API set the correct price to each price cell in row based on width and height of item. Now Im going through all lines in matrix, get dimensions, calculate the price, click on the specific cell with blank price in matrix and through SendKeys Im sending the price - till now its everything ok.
The problem is, when I go on next line and emulate click to next cell, the sap calculates the total price and when is there hundreds of items in order, its too slow. When is there less items, its acceptable, but for hundreds of records isnt useable.
So my question is:
Is there any possibility how to set that sap will not recalculate the total and after setting each price call some function, which will the total price correctly recalculate?
or
Is there any other way how to set price with UI (because user want to check it before upodate) which is quicker?
Thanks a lot for suggestions

Hi Petr,
The UI unfortunately is always going to be really slow for this type of update. If the user needs to see the values, I think I'd create a separate screen that shows only the PO header and line fields that you need to show to the user for updating pricing. Because it's a user form you've got more control on what gets triggered when the user tabs out of a field. You can then use the DI API to update the PO when the user clicks on Update.
Is there any scope to break the PO down to a number of smaller POs? I always recommend to my clients to keep the number of rows below 100 and preferably below 50 because performance can really degrade after that.
Kind Regards,
Owen

Similar Messages

How to set price in PR refer to last po or purchase info record?

Hi,
We meet problem for moving average material, do you know how to set Price in purchase request refer to last po price or purchase info record price, not material master valuation price? As the material price valuation may be low than current purchase price. When dept manager release pr strategy according to value in PR, if pr price not same with PO price, then release will be meaningless.
Thanks,
Li Jing

HI Li Jing
you can use usre exit for the same.
Regards,
Yagnesh Bhatt

How to get Material Master Moving average price into Purchase Order

Hi,
How to get Material master moving average price into purchase order instead of Purchase Info record.
Thanks,
Sridhar

Hi,
        I cannot understand whether it is necessary .
       How about as following step?
             1. create Purcahse requisition
                            Price come form moving average price in material master.
             2. Create Purchase order reference Purchase requisition
                            There is a setting from the unit price of P/R onto the unit price of P/O.
Regards,
     Gaito

How to get Actual Price in Purchase Order

Hello experts,
Could you suggest me what FM (or table) can be used to get value for Actual Price in Purchase Order (tcode ME23N) on tab Conditions?
I not found it in KONV table because this record does not has Condition Type.
Thanks in advance.

Hi,
You can check in material master. For Table Reference, use MBEW Table. For history Table : MBEWH
Here Valuation Area is used for Plant.
Regds,
Anil

Purchase Requisition - Adopt requisition price in purchase order

Hello all,
In Purchase Requisition there is the field BPUEB (Adopt requisition price in purchase order) that is used to transfer the valuation price from the PR to the PO.
The field's values are :
0. Do not adopt
1. As gross price
2. As net price
The default value is "Do not adopt".
How can I change the default value to "As gross price" ?
Thanks,
Isaac

Hi,
you can control this via the user parameter EVO.
the various combinations can be configured in SPRO
Material management > Purchasing > Environement data > Define default values for buyers
Choose an entry (or create a new one)
Go to the price adoption tab and set the "always copy" option and flag the "manual becomes gross price".
Allocate this code to the EVO parameter on the user profile settings.
Steve B

To add Net price in Purchase order

Hi,
I have a sceneria where i need to add net price against line item which was marked as free in purchase order (Net price is 0). Subsequently material was deliverd from vendor and GI also was done. Goods receipt is also completed. This material batch number is consumed for custmer sales orders subsequently. There is 0 quantity available for this material in the plant. Now the user wants to change the net price to 2 for the line item. To change net price in purchase order, we tried to cancel GR material document.But we get an error that 'Deficit of unrestricted use' for the batch number.
Can any one give us solution for changing the net price in purchase order?
Regards,

Hello,
the only chance to add a PO price is to unflag the free flag in ME22N. This is only possible when quantity received for the PO is zero. Therfore you must reverse the quantity received by doing a dummy receipt for the batch, reverse the GR for PO, you change the flag, set a price, redo GR for the PO, reverse the dummy receipt.
Hope this helps, regards
Michael

Adopt requisition price in purchase order in ME51N

Dear experts
I am not able to get field BPUEB(Adopt requisition price in purchase order) in ME51N item details screen,in Valuation tab ,
what is setting required to bring the filed to my valuation tab ?
Gopi

Hi Gopi,
Go to the tcode ME51N and there click on the "Personal setting "
then click on the "default values"
then click on the "more field" there u add the purchase order price and copy it .Nowmaintain where u want the Po price to be as 1.net price or 2. gross price or do not adopt
and save the setting.
Hope it wud have answered ur question
Reward if useful
Aasif

Total net price of purchase order

hi,
i want total net price of purchase order . In that purchase order have two positions. how we can add this two position price.

In the table EKKO - netwr . or EKPO field netpr .

Can I modify the column "Net Price" of purchase order to display 3 decimals

Dear expert,
     Can I modify the column "Net Price" of purchase order to display 3 decimals?
     Looking forward to your reply.
     Many thanks.
Best Regards,
Merry

Hi,
You can easily change ur decimal place in OY04 by seeting number of decimal place to ur currency.
But be careful as it cause a huge effect to ur finance documents, read system message carefully before applying.
Regards
ManUfacTuReR

How to link asset with purchase order and PO Item.

Hello,
I have to generate a report which contains columns
Asset No , po no(ebeln) ,PO Item(ebelp),Material no etc
My query is how to link asset with purchase order and PO Item.
I am selecting asset and po no. from anla but how to get
po item no(ebelp)?
po line item is important in this report because every line item has differrent asset and material no.
i tried to match asset no in mseg table but i am not getting asset no in mseg .
how should i proceed ?

Thanks Thomas & Srimanta for the quick response.
When I checked EKKN table by entering PO there is no asset no. in anln1 field.
Also I would like to add that, In me23n for a PO, account assignment category we are entering 'F' for internal order settlement.
Where can i find the link between asset and po no(ebeln) and po item(ebelp)?
Regards,
Rachel
Edited by: Rachel on Aug 11, 2008 7:23 AM

How to process a Blanket Purchase order?

Hi,
Can you please let me know how to process a blanket purchase order received from a customer?
Can we create a sales order based on the customer's blanket purchase order?
Please help me out with this issue.
Sincerely,
Puja

Dear Puja,
You can create Sales Order ....with reference to Blanket / Frame Purchase Order. This Frame PO contains, Validity and Limit.
Based on this info, you can create Blanket Sales Order.
You can split the blanket sales orders relevant to the customer PO.
Regards - Muralidhara

How to get Sales Text & Purchase Order Text in MM based on (MSEG-MATNR)

Hi
Am working on a Report based on Purchase order & Sales, Could any body tell How to get Sales Text & Purchase Order Text in MM based on (MSEG-MATNR).
the Field i need to get are : SALES TEXT, PO TEXT.
Sunil.

Hi Sunil,
For getting Material PO text and sales text, you have to rely on Purchase Order and Sales Order. And use READ_TEXT function module to fetch the text.
Below are examples of PO text and Sales Text:
1. PO text:
    CALL FUNCTION 'READ_TEXT'
     EXPORT
       ID = 'F03'
       LANGUAGE = SY-LANGU
       NAME = '450000011200010' conacte PO number and line item number
       OBJECT = 'EKPO'
     TABLES
       LINES = INT_TLINES "you will get text in this table
2. Sales order text:
        CALL FUNCTION 'READ_TEXT'
     EXPORT
       ID = '0001'
       LANGUAGE = SY-LANGU
       NAME = '0000000036000010' conacte SO number and line item number
       OBJECT = 'VBBP'
     TABLES
       LINES = INT_TLINES "you will get text in this table
ref: STXH and STXL tables.
Hope it will solve the problem.
Regards
Krishnendu

HOW CAN I GET THE PURCHASE ORDER RELEASE DATE

Dear All,
HOW CAN I GET THE PURCHASE ORDER RELEASE DATE - any reprot is there?
Thank you
Ahmad

Hi,
u goto that PO and select Environment on top line .under that select header changes if u click on that u will get entire details who reased when released, date , time etc
regards,
Srinivas Kona

Terms user query Changes in unit price in purchase order and a/p invoice

Dear sir
please give me a term user query for , if any changes in unit price in purchase order and a/p invoice

Hi,
Try this:
SELECT Distinct ' true'
FROM adoc T2
JOIN ado1 T0 ON T2.docentry = T0.docentry AND T2.Objtype = '22'
JOIN por1 T1 ON T1.docentry = T0.docentry AND T1.Linenum=T0.Linenum
WHERE $[$38.14.number] != T0.Price
Thanks & Regards,
Nagarajan

How to see the customer purchase order acknowledgement ?

How to see the customer purchase order acknowledgement ?
in that PO ACK where we see the UOM and Qty ?
thanks & regards,
Srikanth.

hi
Customer Purchase Order is nothing but the Sales Order in your system
Customer Po acknowledgement is nothing but the Acknowledgement that is sent out (output type BA00) to the Customer after the Sales Order has been created.
Note: Purchase is to Customer - Sales is to you as the Vendor.
cheers
Nandu
Edited by: Nanda Kumar Veeraraghavan on Apr 1, 2008 12:11 AM

How efective set price to purchase order

Similar Messages

Maybe you are looking for