I'm having trouble connecting to the network on my HP stream 7

I'm having so much trouble with connecting my interet to my HP tablet , when i got it .. it was working perfectly fine couple days later it did not want to connect to my internet, it doesn't give any choices to what network to connect too. The troubleshooter said that it had to do something with the adapter. Please help!!!!

This happened to me and a few others here.  The fix for me was uninstalling the wireless driver from Device Manager. I said "yes" when prompted to delete the driver files.  I then ran the wireless driver installer from the hp.com site and that fixed it.  You would have to download the file on another computer and then copy it to the Stream via USB, micro SD or bluetooth if that is working.

Similar Messages

  • When trying to use Siri I keep getting this message: "Sorry, I am having trouble connecting to the network."

    I am trying to use Siri, and I get the message "Sorry, I am having trouble connecting to the network."  Is this the expected "growing pains" of this new feature/service, or am I doing something wrong?  Are there any settings that I gotta do before I can use Siri?
    Thanks.

    I've had the same issue with my wife's iPhone, the first night it worked great then nothing.  My iPhone 4s has had no issues.  I disabled Siri and shut the iPhone off, waited a minute or so and turned it back on.  Re-enable Siri, her info populated automatically.  Siri has been working for the last 30 minutes with no problems ??  Server problems, too many things open at once, having the phone loaded to the hilt with no free space?  It could be any number of things, or many thing working together to silence Siri.....good luck all, I hope this helps.

  • New MacBook Air having trouble connecting to the network and staying connected

    I have an iMac as my prime and a MacBook Air as my remote. My network is all Apple. If I close the lid on my MacBook Air it immediately disappears from finder as a shared resource. However, if on first run though I put it to sleep and then close the lid, it will remain on the network as a shared resource. From hereon in, I can just close the lid to put it to sleep and its fine.
    If I restart either computer or both computers, I have to go through the first run routine again. What makes matters worse is I’m trying to do an 11pm Retrospect backup of the Air and if it gets lost from the network Retrospect is unable to find the device. I have to do a locate in Retrospect and then let it do its backup.
    I think this putting it to sleep on first run and then closing the lid to maintain stability is just a workaround I accidentally discovered. I don’t think it should be working like this. I think if I just close the lid and let it sleep that way on first run it should remain on the network as a shared resource and I should continue to see it on my iMac in Finder but this isn’t the case.
    I’m really looking for opinions on this issue, if others have experienced this and is there anything that can be done about it. I’ve got mixed messages from Apple Tech support but Retrospect tech support said I’m doing everything right. This to me seems like a bug in probably the software. The machine runs fine except for this one little quirk.
    Kerry

    Yes its ticked. I’ve worked at this for two weeks and have gone through every iteration I can think of. Apple said that it is normal that the lid has to be open to have the shared resource but as long as on first sleep I put it to sleep first then close the lid it remains in the iMacs finder Window as a shared resource. And I can open and close the lid from thereon in and it is always there as a shared resource and Retrospect can locate it for backups.

  • Siri: "I'm having trouble connecting to the network."

    Siri went down for me today at about noon. I'm on AT&T. I'm reposting because there has been a lul for several hours in discussion. Quite strange to have such a long draw of radio silence over an issue that was reportedly effecting so many users. Also quite strange that Apple has been leaving it mostly up to the user to figure out as opposed to making some sort of a statement... any statement really, with regards to their working on a solution.
    (Sigh)
    Betas... Whaddaya do, right? Well, some of the solutions were suggesting cycling power. Ah, the good'ol "cycle power" solution. This did the trick for some.
    Not me.
    Then I found some advice posted about disabling and enabling Siri as the solution.
    Not for me.
    Well, what about combining the disabling of Siri with cycling power before enabling Siri again?
    Nope...
    Do a factory reboot?
    Nothing.
    My favorite was disabling Siri, reseting the network settings through General - Reset - Reset Network Settings, and then enabling Siri after all was said and done.
    This was the point at which I shed a single tear and bit my bottom lip so as to contain the dismay I was feeling at facing, yet again, one more alleged solution that didn't work for me.
    Dear Apple (or anyone for that matter),
    Please help. If it's a network problem on your end, just say so.
    Your friend,
    Nate

    Check other threads.  It is not your phone.

  • I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

    I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

    Try this:
    Apple menu / System Preferences / Network.
    Click Location: and select Edit Locations..
    Click + (plus sign), and enter a name for the new location - anything will do.
    Apply this.

  • I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?

    I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?

    Tell us more about the problem, I can think up 100&1 different reasons, but don't have time to go through all the possibilities. So.. what happens?

  • "BlackBerr​y App World is having trouble connecting to the BlackBerry App World server. Verify your network connection​s and try again."

    Hi, I need help please!!!
    I am not able to log into my bb app world nor am I able to download or upgrade any aps.
    I keep getting this error message..
    "BlackBerry App World is having trouble connecting to the BlackBerry App World server. Verify your network connections and try again."
    I called my phone provider and they cannot assist me. I tried a bunch of trouble shhoting options such as:
    -deleted app world and re-installed from website
    -deleted email accounts and re-installed
    -changed bb id name and password from website
    -tried to log on using wifi and non wifi
    Nothing seems to be fixing this issue.
    Can someone please help!!!
    Thanks!

    How long has this been an issue for you?
    have you tried to downgrade your appworld?
    http://www.bbh-plus.net/downloads.php?do=file&id=2​196
    Sorry to hear you're having so much trouble with this.
    (uninstall first though)
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • I am having trouble connecting to wifi networks that are password secured, even though I know the passwords.

    hey guys,
    Ok so here is the problem. I am having trouble connecting to wifi networks that are password secured. I am able to connect to public wifi with no problem, but when networks have passwords on them I am unable to connect to them, and I know that passwords. I also know that i am putting the correct passwords in because I am able to connect to the networks on my computer. I have tried turning my phone off and then back on, turning the wifi off and then back on and even resetting my network passwords to no avail. The networks that are secure show up in the wifi list for networks but when I go to put the password in, it tells me "incorrect password for the network". It has never connected to it since the passwords have been put on it. I am out of ideas for trouble shooting. Can anyone else help?!

    Try a soft reset by holding in the power button and the home button in at the same time for about 15 seconds until the screen flashes and then goes completely black. Afterwards try and turn the phone back on and see if that works. Also you could try and reset the Network Settings by going to Settings--General--Reset--Reset Network Settings and see if that resolves your problems as well. If all else fails be sure and do a backup through ITunes and then try to restore the device. Hopefully all will be well now.

  • We're having trouble connecting to the server

    HI,
    We install SharePoint 2013 on Azure and were using it from clients via vpn connection to our Azure virtual Net.
    When trying to edit or add office document from the client  we get this error: "we're having trouble connecting to the server..."
    sometimes will get the "document is locked ..." which is typical for a document which is still locked by office , I guess its all related to some connection failure from the office client.
    Thanks

    Hi,
    According to your post, my understanding is that you failed to edit or add office document from the client.
    Usually a file is locked when a particular user has ‘checked out’ the file for editing purposes. A write lock is created so that no other user can edit this file simultaneously.
    There can be numerous reasons for this such as:
             1.    System crashes while the file is still open.
             2.    File has been closed unexpectedly.
             3.    Check in was not successful.
             4.    Network connection is lost while file is still open.
    In most of the cases, the write lock still exist for the file so its gives an editing error.
    To resolve the issue, you follow the steps in the article as below:
    SharePoint error: File is locked for editing by ‘domain\username' : SharePoint Tutorial #6
    More information:
    Remove SharePoint Client Side File Lock
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • BlackBerry app world is having troubles connecting to the server HELP!!!!

    New PlayBook..Can't download Apps from App World...it says bb app world is having trouble connecting to bb app world server verify your network
    I'm perfectly connected to my Wifi. Already tried a different Wifi.
    Already restored it to stock still doesn't work
    Already put date to 2011, delete Wifi, restart (hard) and re-enter Wifi credentials.
    Still not working can someone help with this ?

    Hello can7, 
    Welcome to the forums. 
    Have a look at this article regarding the issue you are having. 
    "BlackBerry App World is having trouble connecting to the BlackBerry App World server. Verify your n...
    Hope this helps. Have a good day. 
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server.

    I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server, but this message continues to pop-up several times a day at random intervals. Is there something I'm doing wrong? Or is my computer just having a glitch? Other than that, and a mildly sticking caps lock button, it's working perfectly.
    Thank you!

    Alright it didn't solve it. Any other suggestions?
    I haven't suggested a solution yet. I want to know whether you still get the messages while Time Machine is disabled. Do you? If so, try any or all of the solutions proposed in this thread:
    There was a Problem connecting to the...: Apple Support Communities

  • Is anyone having trouble connecting to the adobe send functionality currently?

    Is anyone having trouble connecting to the adobe send functionality currently?

    What problem are you having? Signing in? Uploading files to send? Actually sending the files? Are you using the Anonymous Link or Personalized Invitations option?
    The more details you can provide, the better we can assist.

  • Is anyone having trouble connecting to the online apple store from iphoto?, is anyone having trouble connecting to the online apple store from iphoto?

    is anyone having trouble connecting to the online apple store from iphoto?, is anyone having trouble connecting to the online apple store from iphoto?

    Have you selected the correct Store for your country in the iPhoto Preferences settings?

  • Having trouble connecting to the updater to CC after renewing my subscription...

    I have renewed my CC subscription through school for another year. My account is showing that it all is well and in order- but I am having trouble connecting to the taskbar- the Apps page is just a spinning circle and has been since last night. My programs think I still have only 2 days left of my subscription. And I think this problem is stemming from not being able to connect to the App Updater. What do I do? I really don't want to reinstall the whole of the CC suite if it can be avoided.

    Mac Spinning Wheel https://forums.adobe.com/message/5470608
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • I am trying to activate LR6 on a laptop that will not be connected to the internet.  I have clicked on the link for offline activation, but it says to follow the instructions till it says "having trouble connecting to the internet".  I never get there.  H

    I am trying to activate LR6 on a laptop that will not be connected to the internet.  I have clicked on the link for offline activation, but it says to follow the instructions till it says "having trouble connecting to the internet".  I never get there.  How do I get it to generate the code that I can take to an internet enabled device so I can validate it?

    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Maybe you are looking for

  • Trasferring data b/w VB and Servlets

    Hi All, We have standalone VB application ,that needs to upload data to a central database . Due to security restrictions ,the VB application is not allowed to open a DB port explicitly. So Im thinking of having a servlet which will act as a proxy fo

  • Need help in creating a sample application using Oracle I\PM 10gR3.

    I am a new to Oracle I\PM 10gR3 and I need a guide to create a sample application using Filer and a sample Process. I have searched the net and was unable to find any documents. If any body has any kind of guide to create an application please let me

  • Hyperlinks in Crystal Reports

    Hi, Gurus, I am new to Crystal Rports and trying to create Hyperlinks from Summary to Detail report. I am in confusion which report is Source and Tearget (Summary or Detail) that I should copy the object and paste into Report part for Another Report

  • Populating an inputtext after immediate action

    I'm having a problem trying to implement this functionality: I have one page on which I have a data table with (for example) cars. Underneath I have a panel grid with outputtext (labels) and inputtext fields which allow the user enter all the details

  • Where can I get bootcamp?

    Hello Apple World, I have a minor issue.  If I do not currently own a copy of bootcamp, how would I go about aqcuiring this piece of software?  You see, I reently got my iMac back from an Apple Store, and after reinstalling the Operating system, and