How far will the extreme reach and how many users can be on there at the same time?

How far will the airport extreme reach and how many users can be on there at the same time?

Last question first, since that is the easy one......approximately 50 (fifty) users for wireless depending on how active each user might be.
The first question is much more difficult, as distance is not really the issue with wireless.....obstructions are the issue.
A wireless signal can easily travel 300 feet or more with no obstructions in the signal path.
But, a typical wall of sheetrock or wallboard in a home will absorb....on average....15-20% of the wireless signal. Brick or adobe will obviously absorb much more. A ceiling....because it is thicker....will absorb about 25-35% of the signal.
So, if the wireless signal must pass through several walls and a ceiling, there won't be much, if any, of the signal left....even though the distance that the signal travels is not great...for example, 20-25 feet.
Other wireless networks around you at the neighbors can also affect the relative strength of the wireless signal.
The bottom line....locate the AirPort Extreme where wireless devices will receive a signal with the least amount of obstructions in the signal path. Your actual performance cannot be predicted in advance. You will not know how well the AirPort Extreme works for you until you try it out in your home.
If you find that the signal does not reach as far as needed, you will need to add additional "extenders", like an AirPort Express to provide more signal coverage.

Similar Messages

I want to purchase the Adobe Creative Suite cs6 master collection. How much will it be? and how do you purchase it?

Hi,
I want to purchase the Adobe Creative Suite CS6 master collection (not the creative cloud) that contains Photoshop, Illustrator, Indesign, Adobe Bridge, Dreamweaver, Flash, After effects, Adobe Premiere Pro.. etc. and I think this is the bundle that I'm looking for.
I want to know how much would it cost, and how would I purchase the Adobe cs6 softwares (from a store or online)?
I prefer to have the actual CD/DVD of the adobe cs6 bundle, would that be possible?
or do you have to download it online and get the serial number online too?
Thank you

I prefer to have the actual CD/DVD of the adobe cs6 bundle, would that be possible?
or do you have to download it online and get the serial number online too?
It's download only these days.
Adobe to Stop Selling Boxed Versions of Creative Suite Software | ProDesignTools
Are you aware that CS6 is superseded by the Cloud and there will be no further updates to CS6? i.e. You'll be buying outdated software

How many users can be logged on to the base station

how manty users can be logged onto the base station?

I am not sure if you mean this to be in the TC area but it will handle 50users I think was the spec.. but never ever do it. Around 10users per AP is about the max you ever want to try. That is assuming all are using the net at the same time. You can probably manage more as long as most are not actually in use.

My ipod classic wont start it only shows the apple sign and wont sync ? can anyone help

my ipod classic wont start it only shows the apple sign and wont sync ? can anyone help

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPod won't turn on
http://support.apple.com/kb/TS1383
-Griff W.

I have airport extreme and just purchased a D-Link DCS-932L home network camera. D-Link says I need UpNp but the extreme doesn't support this. Can I use port mapping? if so anyone know how to set that up? thanks

I have airport extreme and just purchased a D-Link DCS-932L home network camera. D-Link says I need UpNp but the extreme doesn't support this. Can I use port mapping? if so anyone know how to set that up? thanks

Since the D-Link DCS-932L is accessible on the local network via a web browser, you should be able to access this camera from the Internet if your router has a publically accessible Public IP address. If your ISP provides you with a dynamic Public IP address, you may want to use a DDNS service to make it easier for you to locate your camera whenever your ISP changes your IP address.
Start the AirPort Utility > Select the 802.11n AirPort Extreme Base Station (AEBSn).
Select Manual Setup.
Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
Select Advanced, and then, select the Port Mapping tab.
Click the plus sign to add a new port mapping.
For Service, leave the default; this will change to "Custom" once you start entering port values.
In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your camera. In the Private UDP Port(s) and Private TCP Port(s) boxes, enter the appropriate port values that should have been provided to you by the camera manufacturer. Click Continue.
In the Description box, type a descriptive name like "Internet Camera Access," and then, click Done.
Click on Update.
To connect to the shared Camera from a remote location using a Mac or PC:
Start your favorite web browser.
Enter either your Public IP address or DDNS-provided Domain Name, followed by a colon and the Public port number that you choose in step 7 of the previous procedure. For example: http://123.123.123.123:8888 or http://www.mydtdnsdomainname.com:8888

Trying to start itunes - message appears "APSDAEMON.EXE MSVCR80.DLL is missing. Then another box indicates "Error 7 (Windows error 126). Itunes will not start. Can someone tell me what the problem is and how to fix?

when I tried to update to the new version of Itunes - message box appears "APSDAEMON.EXE MSVCR80.DLL is missing". Then another box indicates "Error 7 (Windows error 126)". Itunes will not start. Can someone tell me what the problem is and how to fix?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

HT3546 So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou! :)

So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou!

Welcome!
Last question first, as we need to know what operating system that the Mac is using.
If you are not sure, click the Apple icon in the upper left corner of the screen, then click About This Mac, and post back with the OS X Version number that you see there.
Two possible solutions on the power cord
ORIGINAL OEM APPLE AIRPORT EXTREME BASE STATION POWER SUPPLY AC ADAPTER A1202 if you want a white power supply and white power cord to match up with the Apple device
AC adapter for Apple AirPort A1034 Extreme B... if you don't care what color the supply and cord might be
If you don't already have a Setup Guide.....look here:
AirPort Extreme Base Station Setup Guide v4.2 (Manual)

How to reset your secret question, when you have forgot the answer. And how to change the email where the reset confirmation will be send towards?

can anybody help with the question below?
how to reset your secret question, when you have forgot the answer. And how to change the email where the reset confirmation will be send towards?

You won't be able to change your rescue email address until you can answer your questions, if you don't have access to your current rescue account then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use steps 1 to 7 half-way down this page to update your rescue email address for potential future use : http://support.apple.com/kb/HT5312

How far does airport extremes range go

how far does airport extremes range go

Apple says up to 300 feet or so, but since tests like this are performed in a very large room with no walls, the specification won't mean much to most of us in the real world.
Bottom line is that it is not possible to make a good guess about distance capabilities in a home without knowing the number of walls and or ceilings the signal must pass through.
(A typicall wall of sheetrock and 2 by 4s will absorb on average about 15-20% of the signal and a ceiling absorbs more because it is thicker).
As a very rough guide...if the signal from the wireless router must pass through 4-5 walls, or a ceiling and 2-3 walls, then there won't be much of it left by the time it reaches a computer or other wireless device.

In VB how do I pass my low and high limit results from a TestStand Step into the ResultList and how do I retrieve them from the same?

I am retrieving high and low limits from step results in VB code that looks something like this:
' (This occurs while processing a UIMsg_Trace event)
Set step = context.Sequence.GetStep(previousStepIndex, context.StepGroup)
'(etc.)
' Get step limits for results
Set oStepProperty = step.AsPropertyObject
If oStepProperty.Exists("limits", 0&) Then
dblLimitHigh = step.limits.high
dblLimitLow = step.limits.low
'(etc.)
So far, so good. I can see these results in
VB debug mode.
Immediately after this is where I try to put the limits into the results list:
'Add Limits to results
call mCurrentExecution.AddExtraResult("Step.Limits.High", "UpperLimit")
call mCurrentExecution.AddExtraResult("Step.Limits.Low", "LowerLimit")
(No apparent errors here while executing)
But in another section of code when I try to extract the limits, I get some of the results, but I do not get any limits results.
That section of code occurs while processing a UIMsg_EndExecution event and looks something like this:
(misc declarations)
'Get the size of the ResultList array
Call oResultList.GetDimensions("", 0, sDummy, sDummy, iElements, eType)
'Step through the ResultList array
For iItem = 0 To iElements - 1
Dim oResult As PropertyObject
Set oResult = oResultList.GetPropertyObject("[" & CStr(iItem) & "]", 0)
sMsg = "StepName = " & oResult.GetValString("TS.StepName", 0) & _
", Status = " & oResult.GetValString("Status", 0)
If oResult.Exists("limits", 0&) Then
Debug.Print "HighLimit: " & CStr(oResult.GetValNumber("Step.Limits.High", 0))
Debug.Print "LowLimit: " & CStr(oResult.GetValNumber("Step.Limits.Low", 0))
End If
'(handle the results)
Next iItem
I can get the step name, I can get the status, but I can't get the limits. The "if" statement above which checks for "limits" never becomes true, because, apparently the limit results never made it to the results array.
So, my question again is how can I pass the low and high limit results to the results list, and how can I retrieve the same from the results list?
Thanks,
Griff

Griff,
Hmmmm...
I use this feature all the time and it works for me. The only real
difference between the code you posted and what I do is that I don't
retrieve a property object for each TestStand object, instead I pass the
entire sequence context (of the process model) then retrieve a property
object for the entire sequence context and use the full TestStand object
path to reference sub-properties. For example, to access a step's
ResultList property called "foo" I would use the path:
"Locals.ResultList[0].TS.SequenceCall.ResultList[].Foo"
My guess is the problem has something to do with the object from which
you're retrieving the property object and/or the path used to obtain
sub-properties from the object. You should be able to break-point in the
TestStand sequence editor immediately after the test step in question
executes, then see the extra results in the step's ResultList using the
context viewer.
For example, see the attached sequence file. The first step adds the extra
result "Step.Limits" as "Limits", the second step is a Numeric Limit (which
will have the step property of "Limits") test and the third step pops up a
dialog if the Limits property is found in the Numeric Limit test's
ResultList. In the Sequence Editor, try executing with the first step
enalbled then again with the first step skipped and breakpoint on the third
step. Use the context viewer to observe where the Limits property is added.
That might help you narrow in on how to specify the property path to
retrieve the value.
If in your code, you see the extra results in the context viewer, then the
problem lies in how you're trying to retrieve the property. If the extra
results aren't there, then something is wrong in how you're specifying them,
most likely a problem with the AddExtraResult call itself.
One other thing to check... its hard to tell from the code you posted... but
make sure you're calling AddExtraResult on the correct execution object and
that you're calling AddExtraResult ~before~ executing the step you want the
result to show up for. Another programmer here made the mistake of assuming
he could call AddExtraResult ~after~ the step executed and TestStand would
"back fill" previously executed steps. Thats not the case. Also, another
mistake he made was expecting the extra results to appear for steps that did
not contain the original step properties. For example, a string comparison
step doesn't have a "Step.Limits.High" property, so if this property is
called out explicitly in AddExtraResult, then the extra result won't appear
in the string comparison's ResultList entry. Thats why you should simply
specify "Step.Limits" to AddExtraResul so the Limits container (whose
contents vary depending on the step type) will get copied to the ResultList
regardless of the step type.
I call AddExtraResult at the beginning of my process model, not in a UI
message handler, so there may be some gotcha from calling it that way. If
all else fails, try adding the AddExtraResult near the beginning of your
process model and see if the extra results appear in each step's ResultList.
Good luck,
Bob Rafuse
Etec Inc.
[Attachment DebugExtraResults.seq, see below]
Attachments:
DebugExtraResults.seq ‏20 KB

Factory reset - the what, why, and how for Gingerbread

I wanted to share this information regarding a Factory Reset and how it is used for Gingerbread - both the what, why, and how - in case anyone is interested in the details. If you embark on this process, this thread is worth a close read. thanks to d.harris for writing this up for the SOAK group. good luck everyone and remember, YMMV.
First, what does a "factory reset" do? The short answer is: it will return your phone to the condition it was in when you first purchased it EXCEPT the Android version will match your phone's latest update. For example, I had Android 2.2.1 (Froyo) on my phone before the "soak". My phone was updated to Android 2.3.3 (Gingerbread or "GB") during the "soak". I had some trouble with video performance in the Fox News app and missing album cover art in the Google Music app. So I decided to do the factory reset. After the reset was finished, my Droid X still had Android 2.3.3 on it but all of the settings had been restored to their factory defaults. And presumably, all Android operating system (OS) caches had been flushed. All of the data that was stored in my phone's memory was cleared. So my contacts were all gone. And I had to reactivate my phone (*228 1) just like a new phone and reenter my Google account info.
Does a factory reset actually clear the entire contents of the phone's memory and re-install Android from scratch? (That's what I wish it did.) But I'm not sure that it does that because the entire process seems to go too fast for that. However, a factory reset does seem to do a better job of cleaning out the remnants of the previous OS (Froyo 2.2.1) than a standard "update" does. But that's not all.
The factory reset also clears all of the apps that were installed in the phone's memory. And it clears all of the app data that was installed in the phone's memory. So you will have to reinstall all of your apps from the Android Market (or wherever they came from). Normally, you do not have to pay for them again because the Android Market remembers your previous purchases as long as you register your phone with the same Google account.
However, the Android Market does not remember the free apps that you installed---so you should make a list of all your apps before you reset your phone so you won't forget the free ones. The reason I wrote "installed in the phone's memory" above is because a factory reset gives you a choice whether or not to clear your phone's micro SD memory card. If desired, it will leave it alone. So any apps or data will still be present on your card after the reset. However, your phone will not be aware of the apps on the memory card because all "knowledge" of them will have been erased from your phone's internal memory---you'll still have to reinstall ALL of your apps. But the data files will still be there. Regarding the "built-in" apps that come pre-installed with Android, they will also be restored to their original state and version when you do a factory reset. So you'll need to update some of them (like updating Google Maps and updating Adobe Flash from 10.1 to 10.3).
Before you do a factory reset, you should have a fully charged battery becaues you do NOT want to run out of power in the middle of a reset---that could "brick" your phone. I always take an extra precaution: in addition to a fully charged battery, I also connect my phone to AC with the Motorola AC-to-USB charging adapter that came with it. Not only does it insure that I won't run out of power, it also keeps my battery fully charged so I have a 100% charge after the factory reset (you'll have a lot of work to do afterward to reinstall your apps and restore all of your Android and app settings back to your preferences).
Here's a pre reset checklist:
• Export your contacts to your SD card so you can easily restore them later (Contacts/Dialer menu > Import/Export > Export contacts to: SD card).
• Make a list of all of the apps that you installed (Android menu > Manage Apps > Downloaded tab).
• Get a copy of your Google account login info (user name and password).
• Get a copy of your Verizon Backup Assistant PIN (if you use this service).
• Turn off your phone and pull its battery. Wait 30 seconds or more and reinstall the battery and turn the phone back on. This will make sure that there is nothing hinky in your phone's volatile memory as the factory reset begins.
• Fully charge your phone's battery and plug the AC charging adapter into the phone.
Now you're ready to do the deed. Follow these steps:
1. If it's not already on, turn on Google's "back up my data" option with Android menu > Settings > Privacy > Back up my data. This is required for the next step.
2. Turn off the "automatic restore" option with Android menu > Settings > Privacy > Automatic restore. This will prevent your phone from trying to download every paid app that was previously on your phone all at once. It is much better---especially if you have a lot of apps---to install them one at a time. Plus, you may not want some of them to be reinstalled right away if you are trying to determine if one of them is causing trouble under GB 2.3.3.
3 If you do not want to use Google's "back up my data" service to restore your wi-fi passwords and such, then return to Step 1 and turn it off.
4. Begin the factory reset with Android menu > Settings > Privacy > Factory Data Reset. You'll be asked to confirm that you really want to do a factory reset and you'll be given the opportunity to clear your micro SD memory card as a part of the process. I chose not to clear my memory card because I have a 32 GB card with "tons" of music and other files that I do not want to have to restore (it would take hours).
When should you do a factory reset? Everyone should do it before they give their phone away, sell it, or discard it. You don't want someone else to have access to your personal data! And, a factory reset can be a helpful troubleshooting tool when faced with problems.
By the way, my factory reset did not help the video problem I was having with the Fox News app nor did it enable Google's Music app to find all of the album art on my micro SD card. Both problems persisted after the reset under GB 2.3.3.
Finally, there are other things you can do to flush old data from your phone such as clearing the cache partition of your phone's built-in memory. This requires the use of its "Android system recover" menu. Even though I expect this cache data to be cleared during a factory reset, I did it after my reset just to make sure. Clearing the cache partition is usually what folks try before a factory rest so they can (hopefully) avoid the factory reset. I'll leave it to a Motorola staff person to go into that.

OK, got it ... the Power ON Factory reset procedures might have changed with GB ...
To get to a Factory reset using the Power up method:
1. Power Off phone
2. Press & Hold the HOME Button
3. Press and Hold the Power ON button.
You come up to the Triangle with the Exclamation mark & android guy.
Press BOTH the Up and Down Buttons at the same time. This brings up the Blue menu of options.
use the Up/Down arrows to scroll thru the choices. Press the POWER Button to Select the menu item you choose.
You can harmlessly test this and just choose to Reboot without doing anything, just to see how it works in case you ever need to do this in the future.
edit: It was concluded in the test group that they changed this process to align it with the new DX2 as the camera button isn't hard-wired like it is in the DX. So likely they just wanted to make this process the same for both platforms. At least it sounds like a good reason...

How can i purchase a macbook air in Nigeria? apple has no shop in the entire country and independent dealers charge ridiculously sometimes more than double the prices of mac products without guarantee of getting it with required specifications. its sad cl

how can i purchase a macbook air in Nigeria? apple has no shop in the entire country and independent dealers charge ridiculously sometimes more than double the prices of mac products without guarantee of getting it with required specifications. its sad cos Nigeria has a very large apple market plus phones and most recently ipads especially. its been frustrating trying to get a macbook, even have to wait for when someone will travel out of the country, then you send the person(thats if you have the money at that time). Please somebody help inform apple maybe they can do something about this, its really disappointing.

This is a user-to-user technical support forum. You're not addressing Apple here. Use the apporpriate link on fhe Feedback page to let Apple know how you feel:
http://www.apple.com/feedback

How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

The loading bar at the bottom of my browser has disappeared and I want to reinstall or reactivate it. How do I do this please and what is this bar called? I use the lastest version of Firefox 3.6.3 and Windows XP.

The loading bar at the bottom of my Firefox browser has suddenly disappeared and I want to reinstall or reactivate it. How do I do this please and what is this bar called? I use the latest version of Firefox 3.6.3 and Windows XP. I have many add ons and I usually automatically install the recommended updates. This problem has never happened before and switching my browser on and off again does not solve the issue.
== This happened ==
Every time Firefox opened
== I am not sure why this suddenly happened. I think it may have been after my usual updates but I am not sure if that has anything to do with it at all.

Loading Bar? Maybe the URL/address bar where you type sites you want to go to (like www.google.com)? See Navigation Bar below. You may also need to see the first item "Can't see the Menu Bar".
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
You can un-install the Mozilla ActiveX control as Firefox no longer uses it and hasn't since, as I recall, version 2. See: [[ActiveX]]
To remove Tools > Add-ons > Extensions, click on the item, click Uninstall, click Restart Firefox in the Extensions window.
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)''': your ver. 10.0 r45; current ver. 10.1 r53 ('''important security update 2010-06-10''')
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer.
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

How far will the extreme reach and how many users can be on there at the same time?

Similar Messages

Maybe you are looking for