How find the errors (sdo_geom.validate TRUE) in objects

Hi, I've many layers of polygons with topologycal errors (loaded from Mapinfo 7.5 , the function sdo_geom.validate_geometry_with_context give error 13349, probably there are some ring, edge etc...
But there is a metod, program, utility to find where the errors are to correct them?

Fabio,
Error 13349 indicates that the polygons intersect with themselves.
You need to fix these errors. There are tools in MapInfo Professional 7.5 to check and automatically fix them. There are other tools commercially available which also fix geometry errors.
If you know MapInfo I would fix these errors there.
Ivan

Similar Messages

Any option is there to find the error record in loop for huge amount of rec

Hi Guru's,
In our production system we got a error. While debugging we found one of our loop getting 1 lakh records. One of the record from the internal table having some wrong values because of that its giving a error message. But we are not getting any proper message.
Now our problem is its very difficult to debug all the records one by one. Even its not possible to give Watchpoint. bze in what situations its giving this error that also not predictable. So how to find the error record?
Kindly suggest.
Ananadhan

Need a lot more info.
To start with is this CR Designer or some other product?
I suspect it's classic SAP products like Business One etc., if so please mark as answered and post your question int the correct forum.
Thank you
Don

Not able to find the Error in code !

please help me to find the error in my code. When I Added x1~kondm its not giving anything i.e
*join t178t as x1
*on p1kondm = x1kondm
in the SQL part !
REPORT YINTERACTIVEPROGRAM01.
TABLES:VBAP,
 VBPA,
 VBRP,
 VBRK,
 KNA1,
 ADRC,
 TPAR,
 TVKGG,
 TVM1T,
 TVM2T,
 TVM3T,
 TVM4T,
 VBKD,
 SZA1_D0100,
 T178T.
TYPES:BEGIN OF TY_TAB,
 VBELN LIKE VBAK-VBELN,
 VKORG LIKE VBAK-VKORG,
 ERDAT LIKE VBAK-ERDAT,
 AUGRU LIKE VBAK-AUGRU,
 BSTDK LIKE VBKD-BSTDK,
 BSTDK_E LIKE VBKD-BSTDK_E,
 spart like vbap-spart,
 kondm like vbap-kondm,
 waerk like vbap-waerk,
 netwr like vbap-netwr,
 kwmeng like vbap-kwmeng,
 vkaus like vbap-vkaus,
 land1 like vbpa-land1,
 nrart like tpar-nrart,
 vtext like tpar-vtext,
 parvw like tpar-parvw,
 name1 like adrc-name1,
 name2 like adrc-name2,
 name3 like adrc-name3,
 name4 like adrc-name4,
 ort01 like kna1-ort01,
 pstlz like kna1-pstlz,
 vtext like t178t-vtext,
 END OF TY_TAB.
DATA: ITAB TYPE STANDARD TABLE OF TY_TAB WITH HEADER LINE.
parameters:salesno like itab-vbeln.
select s1~vbeln
 s1~vkorg
 s1~erdat
 s1~augru
 k1~BSTDK
 k1~BSTDK_E
 p1~spart
 p1~kondm
 p1~waerk
 p1~netwr
 p1~kwmeng
 p1~vkaus
 r1~land1
 t1~nrart
 t1~vtext
 t1~parvw
 n1~name1
 n1~name2
 n1~name3
 n1~name4
 c1~ort01
 c1~pstlz
 x1~vtext
into corresponding fields of table itab
from vbak as s1
join VBKD as k1
on s1vbeln = k1VBELN
join vbap as p1
on k1vbeln = p1vbeln
*join t178t as x1
*on p1kondm = x1kondm
join vbpa as r1
on p1vbeln = r1vbeln
join tpar as t1
on r1parvw = t1parvw
join ADRC as n1
on r1adrnr = n1addrnumber
join kna1 as c1
on r1land1 = c1land1
where k1vbeln = salesno and s1vbeln = salesno and p1~vbeln = salesno
and r1~vbeln = salesno.
loop AT ITAB.
WRITE : /(30)'VBELN: ', ITAB-VBELN,
 /(30)'VKORG: ', ITAB-VKORG,
 /(30)'ERDAT: ', ITAB-ERDAT,
 /(30)'AUGRU: ', ITAB-AUGRU,
 /(30)'BSTDK: ', ITAB-BSTDK,
 /(30)'BSTDK_E:', ITAB-BSTDK_E,
 /(30)'SPART: ', itab-spart,
 /(30)'KONDM: ', itab-kondm,
 /(30)'WAERK: ', itab-waerk,
 /(18)'NETWR: ' , itab-netwr,
 /(18)'KWMENG: ', itab-kwmeng,
 /(10)'VKAUS:', itab-vkaus,
 /(30)'LAND1:', itab-land1,
 /(30)'NRART:', itab-nrart,
 /(30)'PARVW:', itab-parvw,
 /(30)'ADDR1:', itab-name1,
 /(30)'ADDR2:', itab-name2,
 /(30)'ADDR3:', itab-name3,
 /(30)'ADDR4:', itab-name4,
 /(30)'PSTLZ:', itab-pstlz,
 /(30)'ORT01:', itab-ort01,
 /(30)'Compiler desc:', itab-vtext.
 uline.
ENDLOOP.
 if sy-subrc <> 0.
 write : / 'No data found'.
 endif.

hi,
u failed to check relationship between tables and as well as mandatory fields need to be checked, i noticed following
from vbak as s1
join VBKD as k1
on s1vbeln = k1VBELN
join vbap as p1
on k1vbeln = p1vbeln and k1posnr = p1posnr
*join t178t as x1
*on p1kondm = x1kondm
join vbpa as r1
on p1vbeln = r1vbeln and p1posnt = r1posnr join tpar as t1
on r1parvw = t1parvw
join ADRC as n1
on r1adrnr = n1addrnumber * No relation between these two tables/b]
join kna1 as c1
on r1land1 = c1land1 and r1kunnr = c1kunnr 'here u need to check mandatory fields also
where k1vbeln = salesno and s1vbeln = salesno and p1~vbeln = salesno
and r1~vbeln = salesno.
anyway, in performance point of view, writeing code with this much joins is not acceptable.
comeback if you need any further help
regards,
pavan
Message was edited by:
 pavan kumar pisipati

While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcom?

While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcome?

Neha,
you can do in two ways.
1. Enter a valid Division which you configured in the system.
2. Remove the Division as required field. However I suggest it should have a valid division. Why can not you check with your Functional owner?
Linganna Katigiri

I upgraded from Dreamweaver CS4 to CS6. but now "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?

I upgraded from Dreamweaver CS4 to CS6. but now when I want to upload I get "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?
Mac OS 10.8.5
None of these issues are causing the error in DW CS6. We have double checked all of them and we have everything exactly right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Could there must be factor in 6 that didn't exist in 4? Something that isnt in the SiteSetup but in some hidden dialog box ?
I can also upload to my host using Fetch, a third party FTP. And as I said DW CS4 works fine. So the problem is not with my host, its with DW CS6 in particular.

Thank you Jon, that fixed it perfectly. You have saved me from going crazy. The only difference I see now is in "Server Name" it changed what I had entered (my ftp address) to "Remote Server"; which seems odd -- but it works! Although I know there maybe also some other dialog box I have never seen
Of course I saw that menu item "Import" and but I thought thats obviously not for me: "Why would I want to import an entire website?". I did not however see "Export the selected site" for thats only a tiny icon in the footer. However I would have thought the same: "Why would I want to export my entire website?".
An observation: I've seen this problem in a lot of Adobe software, the menu-names of items are obscure, non descriptive. What would be better would be for the menu names or popups to say "Export Site Setup settings" and "Import Site Setup settings"

Jdbc scenario .. where to find the error msg

Hi,
I am working on a scenario,
abap proxy->jdbc adapter->MsSql server.
Whle testing,
i sent the payload xml from the sproxy test sceen.
After that, i checked the "Monitor for processed xml messages" screen (SXI_MONITOR).
There it shows the status "Processed successfully" for the message that i sent.
But when i checked the sqlserver database, the record is not inserted.
Where can i find, if anything gone wrong at Jdbc adapter, or there after.
Thanks in advance,
Ganesh

Hi
apart from this communication channel you can see the message in adapter engine
to do this take the id of the message fromSXI_MONITOR
then go to transaction sxmb_ifr
inside this go to message Monitoring
under drop down select adapter engine and inside the window give the iD of your message which you have taken from MONI
if you are not getting the filter for message ID then click on additional filter and give the iD
after this you can see your message
select the radio butten inside your message and click on details
here you will get the log of each and every step which have been followed in processing the message and you can find the error exactly
regards
sandeep
If helpful reward points

How find the missing glyph using javascript [like indesign preflight], and replace same glyph available font or

The situation:
I want to use basetext font, but some of the glyphs are missing in it, and are highlighted with pink boxes. common font [stix, etc.] have much more glyphs than basetext font. I can apply common font [stix, etc.]manually for each of the missing glyphs or insert two character and use kerning set it up, but it is tedious.
Question:
How find the missing glyph using javascript [like indesign preflight], and replace same glyph available font or insert two character and use kerning set it up?
Any one know how to do this?
Thanks in Advance,
~Jack

Try Peter kehrl's script
http://www.kahrel.plus.com/indesign/missing_glyphs.jsx

Please help in finding the error in this code

Dear Friends,
I am trying to make the value of 'Shift' on the basis of BLDAT CPUDT & CPUTM of MKPF but I am doing something wrong. Kindly have a look at the following code, especially the IF..ELSEIF section and help me in finding the error.
Regards,
Alok.
SELECT MBLNR MJAHR BKTXT BUDAT BLDAT CPUDT CPUTM USNAM
INTO CORRESPONDING FIELDS OF TABLE I_MKPF1
FROM MKPF
WHERE
BUDAT EQ S_BUDAT AND
TCODE2 EQ 'MFBF'.
********************************************************ALOK 01.02.07
LOOP AT I_MKPF1.
 I_MKPF-MBLNR = I_MKPF1-MBLNR.
 I_MKPF-MJAHR = I_MKPF1-MJAHR.
 I_MKPF-BKTXT = I_MKPF1-BKTXT.
 I_MKPF-BUDAT = I_MKPF1-BUDAT.
 I_MKPF-BLDAT = I_MKPF1-BLDAT.
 I_MKPF-CPUDT = I_MKPF1-CPUDT.
 I_MKPF-CPUTM = I_MKPF1-CPUTM.
 I_MKPF-USNAM = I_MKPF1-USNAM.
IF ( ( I_MKPF1-CPUTM >= '090000' AND I_MKPF1-CPUTM < '160000' )
AND ( I_MKPF1-BLDAT = I_MKPF1-CPUDT ) ).
I_MKPF-SHIFT = 'A'.
ELSEIF ( ( I_MKPF1-CPUTM >= '090000' AND I_MKPF1-CPUTM <= '110000' )
 AND ( I_MKPF1-BLDAT <> I_MKPF1-CPUDT ) ).
I_MKPF-SHIFT = 'C'.
ELSEIF ( ( I_MKPF1-CPUTM >= '160000' AND I_MKPF1-CPUTM < '000000' )
AND ( I_MKPF1-BLDAT = I_MKPF1-CPUDT ) ).
I_MKPF-SHIFT = 'B'.
ENDIF.
APPEND I_MKPF.
CLEAR I_MKPF.
ENDLOOP.

Hi.
IF ( I_MKPF1-CPUTM >= '090000' AND I_MKPF1-CPUTM < '160000' )
 AND ( I_MKPF1-BLDAT = I_MKPF1-CPUDT ) .
I_MKPF-SHIFT = 'A'.
ELSEIF ( I_MKPF1-CPUTM >= '090000' AND I_MKPF1-CPUTM <= '110000' )
AND ( I_MKPF1-BLDAT <> I_MKPF1-CPUDT ) .
I_MKPF-SHIFT = 'C'.
ELSEIF ( I_MKPF1-CPUTM >= '160000' AND I_MKPF1-CPUTM < '000000' )
AND ( I_MKPF1-BLDAT = I_MKPF1-CPUDT ) .
I_MKPF-SHIFT = 'B'.
ENDIF.
Try the above code ..
Regards
Sudheer

What table where i can find the errors in Sales Order

hi,
what table where i can find the errors in Sales Order. here's my situations, I need to create a abap report of CRM sales order not replicated to R/3 and show what's the error. I can't find the actual error in CRMD_ORDDERADM_H and CRMD_ORDERADM_I. I also tried calling program "CRM_ORDER_READ" but the program doesn't display/returns error's on header and item level.
please help.
earl g. faren

hi,
what i need is a table where i can find the sales transaction errors. I'm doing a abap report to list down sales transactions with error(s). I checked the table CRMD_ORDERADM_H and CRMD_ORDERADM_I but there's no field for transaction errors.
please help me find a table where I can link the tables above to get the specific errors for a sales transactions.
thanks alot.

Please help me find the error in the annex VI,access

Hello, everyone, this is a program about ACCESS, please help me find the error in the annex VI, why do I always run time error. Thank you very much.
Attachments:
write access test.vi ‏22 KB

Thank you for your reply, I have an attachment process map, could you help me change it, I just want to put my number in the array can continue to update the database. And I want to create a table.
this is my msn :[email protected]
Waiting for your reply on line
谢谢你的回复，我的附件中有程序图，能不能帮我改一下，我只是希望，把我的数组中的数能够持续的更新在数据库中。并且创建一个我想要的表。

How to find the WhereUsed List for a Business Object Event?

How to find the WhereUsed List for a Business Object Event?

Can anybody let me know how to get which
Whereused function will get the data from
different Werks in multi-level?
Any sample program please!!!

Ipad2 shut off after down the battery but when connect the charger my ipad2 is not storing the power in the battery and i also not finding the error code ???

ipad2 shut off after down the battery but when i connect the charger with my ipad2, its not storing the power in the battery and i also not finding the error code ???

If you drained the battery, it may take a bit for it to come back. I'd plug it in and leave it for a few hours and see if it's charging.
If not, you can try to do a reset. Hold down the sleep and home keys for about 20 seconds. When you see the white apple, let go and let it reset and see if it charges.
It's also possible that your battery has reached the end of its life. THey can only handle a finite amount of recharge cycles. If you can't get it to hold a charge, then make an appointment at your local apple store and explore your other options.

How find the Special Character Table?

Hi friends.
i need table for special characters. how find the special character table.
example : &,@<#<$ -- all are special characters.
any body please reply immdly.
regards
pauldharma

Hi Raj,
Check this forum thread:
Print Currency as symbols in SAPSCRIPT/Smartforms
Hope this helps.
Regards,
Vivek Myadam

How to find the last string value in dynamic object?

Hi All,
I am trying to find the last string value in dyanamic objects,Any one have solution for this.
Ex:
my data :12347-ebjdone-525-ecgfjf-25236-defdafgdeg
And i want to show the output is :defdafgdeg
Any ideas:
Thanks
Srini

For oracle try using oracle function.
e.g.
SELECT reverse(substr(reverse('12347-ebjdone-525-ecgfjf-25236-defdafgdeg'),1,instr(reverse('12347-ebjdone-525-ecgfjf-25236-defdafgdeg'),'-','1'))) from dual
Object definition might look like:
reverse(substr(reverse({ObjectName}),1,instr(reverse({ObjectsName}),'-','1')))
Regards,
Kuldeep
Edited by: Kuldeep Chitrakar on Feb 12, 2010 8:12 AM

Find the implementation class of a Business object

HI Gurus,
Is there any path in SPRO from where we can find the implementation class of a BOL object?
For an example, I am working with BuilHeader. The backend table for BUL Header which will be updated while modifiyng BuilHeader is BUT000. So how can we find the back end database table name or implementation class where the table BUT000 is updated?

Hi Suchandra Bose
the flow will go like this.
1) the data in the BOL structures moved to Genil Implementation Class which is defined in the below SPRO path
CRM->CRM Cross application components->Generic Interaction Layer/Object Layer->Basic Settings in this corresponding each and every component one Genil class and its Model information in the form of tables will be maintained.
2) Take for example BP component , for BP component CL_CRM_BUIL is the Generic Interaction layer class , with in the generic interaction layer class methods (Create_objects, MODIFY_OBJECTS, GET_OBJECTS) you will find a code snippet to get the * Handler class* , this handler class will inturn get the Interaction Layer classes to reach the API ,
get object handler
      lv_cl_object =
         me->handler_factory->get_obj_handler(
                                  iv_object_name = iv_object_name ).
3) This handler method will query the table CRMC_OBJIMP_BUIL to get the relevant handler class depending on which functionality you are implementing.
Thanks & Regards
Raj

How find the errors (sdo_geom.validate TRUE) in objects

Similar Messages

Maybe you are looking for