How I can save an existed Table "exactly" into an Excel or a Text file?

I am able to save from a Table into an Excel file, but I could not put in it the following:
a)Column Headers
b)First column should be integer
c)The Scientific notation (supposed to be with 6 decimal point) but it shows only two decimal point
d)In the last 3 rows, it couldn't understand --> it showed Zero's
***> It shows better when I changed the data.xls to data.txt ... only solved c)
***> You cam modify completely how to write into the Excel or Text file ... but do not change the way I write to the TABLE (I have "no choice" to keep it that way!)
Attachments:
Write_Table.vi ‏51 KB

First of all, the Write to Spreadsheet File function does not create an Excel file. It creates a text file with values separated by a delimiter. Excel is capable of recognizing tabs and commas as delimiters and will convert the text into a spreadsheet.
Most of your problems can be solved by converting Write to Spreadsheet to accept arrays of strings instead of arrays of numbers and adding the column headers to the array. You'll probably have to experiment with the Excel import function as well.
Thye best way, however to get exactly what you want into Excel is to use ActiveX. There is an example the4 comes with LabVIEW that shows some of the basics. You can find other examples by searching the Developers Zone. NI also sells a toolkit for reading/
writing Excel and Word files.

Similar Messages

How i can save report updation on report builder 10g

how i can save report updating on report builder 10g
please help me
any help will be appreciated

See anwer in :
why no body try to help me its possible no body has idea about how to save

Good day! When saving a file in Illustrator, I can not keep the older version. How You can save the file in an older version?

Good day! When saving a file in Illustrator, I can not keep the older version. How You can save the file in an older version?

When you save a file that's what options offers application
05 мая 2014 г., в 13:40, Jacob Bugge <[email protected]> написал(а):
sage go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click theStop Email Notifications link.

How I can save the value of a variable in a database?

hello,
how I can save the value of a variable in a database? I need to keep the # of times you press click animation. to know how many times it has been seen.
I connect to msql database, using php, javascript, ajax and jquery, but not how to save the variable counter clicks from adobe edge Animate
appreciate your help so I can connect to the database from adobe edge animate.
thank you very much
Luis Felipe Garcia
[email protected]

Hi, all-
This isn't an Animate-specific issue, but I thought I'd take a stab at it anyway. As with anything else on the web, you need to have a server script to handle incoming data, so it's all back end work. Your page will need to call that script and provide parameters to that script that it can read.
The easiest way I can think of to do this (and this is all highly theoretical, so please make sure it's secure before you implement it) is to create a 1px div that has visibility off. Whenever you click, you can load your URL in that div, which then increments your counter on your db.
Hope that helps inspire some interesting solutions!
-Elaine

Can anyone tell me how I can save a password again after "never remind this password" was pressed accidentally

Can anyone tell me how I can save a password again after "never remind this password" was pressed accidentally

More details please. In what application did this happen?

Can anyone suggest how I can save voicemails from my dad who passed away.

I am preparing to change carriers. Can anyone suggest how I can save voicemails from my dad who passed away? Im not familiar with Icloud but I cannot lose these voicemails. Please help thanks

Play them into a recorder. Many computers have built-in microphones and record and save them as a .wav file. On a PC you can use Sound Recorder or QuickTime Player. On a Mac you can use QuickTime Player (see "Recording with QuickTime Player" here: Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files).
You might also try contacting your carrier as some allow you to download them from your account on their website.

TS2755 I would like to know how I can save a years worth of text messages from my iphone 4s to my computer. (I have verizon as a carrier)

Hey:
Hi everyone.
would like to know how I can save a years worth of text messages from my iphone 4s to my computer.
(I have Verizon Wireless as a carrier), I have tried the app store but it is okay for one messgae but not for hundreds.
Can you help me.
Thank you in advance. Happy Thanks Giving.

There is no Apple provided way to save text messages to a computer.
The iPhone backup done via iTunes or iCloud, will backup the messages but they are not accessible on the computer.
A google search may reveal options to saving the messages to the computer.

HT201303 how i can save my new contact in sim card using iphone 4S ?? plz

how i can save my new contact in sim card using iphone 4S ?? plz

iPhone stores no data on a sim card, thus there is no way to save anything to the sim card.

At only 15 months of age, my MacPro crashed yesterday! Any idea how I can save my hard disk from being destroyed if I hand it in for repair?

At only 15 months of age, my MacPro crashed yesterday! Any idea how I can save my hard disk from being destroyed if I hand it in for repair?

Open it up. Buy a new replacement drive. Install Mac OS. Then give it to them if you still have trouble.
As for the install failing,
I never do the older "archive and install"
I format and initialize first, even zero the drive, and only then install.
of course all the data is lost.
Data Rescue 3 demo can scan a drive but you need to have setup a 2nd boot drive to work from, AND you would need part of that 2nd drive partition for recovery of data. 30-50GB system partition and 150% the size of the drive you want to recover.
TimeMachine I never adopted or liked but 350% and would only use as secondary backup with cloned copy of your drive.
Backups can be scheduled, run at night or weekend or both, a weekly clone and daily sets.
Disk Warrior 4.2+ is another $100 (DR3 is about same but demo is free to try).
A spare external drive case $30? and TWO hard drives, a replacement and backup/recovery $100 each?
Just some ideas to throw out there....
Bootable clones though you will find are very useful, handy.
I like the small 40GB emergency boot partition - put one on your TimeMachine drive etc.
LION: the one good thinig: it has a recovery mode partition and new Macs have "net install" feature and minimal hardware diagnostic over the internet to do Apple Hardware Test. Lion $30 and might actually want to install it on external.
So DO try installing OS X on one of your external drives - create 40GB volume just for that - if you can please.

How i can save Toshiba e330 ROM (bios rom?)

i have toshiba with German windows mobile and my friend have english version, How he can save own ROM of e330, i try releoad on my toshiba?

Hey man this is really old device.
Have you checked Toshiba download page under http://eu.computers.toshiba-europe.com ?
Maybe you can download English version.
Check product type for archive and as family choose pocket PC.

Can we include a table data inbetween a paragraph using a text module

can we include a table data inbetween a paragraph using a text module or standard text.
For eg:
This is the output for purchase order &itab-ebeln& and this purchase order &itab-ebeln& has been released.
I want the purchase order number to be placed inbetween these line as shown above. Can anyone help me on how to do this.
Regards,
Rose.
Edited by: camila phyrose on Feb 18, 2008 11:11 AM

Hi,
You can do this in the Text module by adding the fields with the 'Insert field' icon (just as you would with a text element). The Text module doesn't understand their content, but at runtime provided your smartform does this will work.
Regards,
Nick

WCF Service and Sharepoint Form library : How i can read a access a form libray and query a item from file name and read form xml in WCF service ?

WCF Service and Sharepoint Form library : How i can read or access a form libray and query a item from file name and read form xml in WCF service ?
Ahsan Ranjha

Hi,
In SharePoint 2013, we can take use of REST API or Client Object Model to access the SharePoint objects like Form Library.
SharePoint 2013 REST API
http://msdn.microsoft.com/en-us/library/office/dn450841(v=office.15).aspx
http://blogs.technet.com/b/fromthefield/archive/2013/09/05/working-with-sharepoint-list-data-odata-rest-and-javascript.aspx
SharePoint 2013 Client Object Model
http://msdn.microsoft.com/en-us/library/office/fp179912(v=office.15).aspx
http://msdn.microsoft.com/en-us/library/office/jj193041(v=office.15).aspx
With the retrieved file, we can then use XmlDocument object to parse it and get the values you want:
http://weblogs.asp.net/jimjackson/opening-and-reading-an-xml-file-in-a-document-library
http://stackoverflow.com/questions/1968809/programatically-edit-infopath-form-fields
Best regards
Patrick Liang
TechNet Community Support

HoW do I save a recording that has been sent to me via text message? Thanks

HoW do I save a recording that has been sent to me via text message? Thanks

You will need a document storage, player, or manager to save the file (DropBox, File Manager, Box, VLC, MoliPlayer for example).
To actually save the file, with it open in iMessage, tap the file icon (lower left) and select the app to save it in.

Can someone tell me how I can plug my nano 5th gen into a sound system to use for music in my exercise class? Thank you.

Can someone tell me how I can plug my nano 5th gen into the sound system at my gym? I lead a zumba class, and I use music. I can't find any place on the nano itself that I would be able to plug it into the sound system. Thanks!

Connecting iPod to your home or car stereo

How to know they is space or carrier return when java read a text file.

Hi,
Please help.
How to know they is space or carrier return when java read a text file.
The reason is that. I want to use java for loop to read each part of value. for example: first part is the items name. After the space (I need to tell java when this is a space here and its need to skip) , following by the items prices in double value and space again (need to skip also) and etc.
item name1
item name2
item name3
item name4
item name5
<--- here is the space to skip and another loop to read following items prices
item price1
item price2
item price3
item price4
item price5
<--- here is another spcae again. and so on
thank in advance!

You can check to see if the sting you read in is just nothing, depending on how you're reading it in:
if((str = inStream.readLine().trim().equals("")))
// skip and get ready for the next section
else
// handle the next item
The trim() method gets rid of all leading and trailing spaces and I'm assuming you're using a stream that can use the readLine() method that returns a String.
I hope this is clear. Let me know if it isn't, I'll try and word it different, or post how you're reading the values in if you need more help.

How I can save an existed Table "exactly" into an Excel or a Text file?

Similar Messages

Maybe you are looking for