How IE works for flat file

Hi all:
As we all know that, when IE gets a idoc's service name from SLD, then use it with idoc's message type and Idoc type to do receiver determniation, what about flat file ? how can we know its Service name and interface name if there is only a flat file on FTP? how IE works for Flat file ?
Couldn't thank you more

Hi,
For any idoc scenarious, you would use business systems rather than business service which is stored in SLD. So the IE would fetch it from SLD at runtime.
For file based scenarious also, you can create business system as type third party and use the same.
Is that answer your question?
Regards
Krish

Similar Messages

How To guide...for Flat File upload for User-Defined variables

Has anyone got link to the guide that describes how to do a flat file upload for populating User-Defined Variables ?
Any assistance will be appreciated.
Uche

SAP BW Business Planning and Simulation "How To" Guides
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ab9fd590-0201-0010-2590-be78eb70015c
How to Upload User-Specific Variable Selections in BW-BPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how to upload user-specific variable selections in bw-bps.pdf
this is what you are looking for ?
Message was edited by: Murali

How to store the flat file data into custom table?

Hi,
Iam working on inbound interface.Can any one tell me how to store the flat file data into custom table?what is the procedure?
Regards,
Sujan

Hie
u can use function
F4_FILENAME
to pick the file from front-end or location.
then use function
WS_UPLOAD
to upload into
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'   "Function to pick file
    EXPORTING
      field_name = 'p_file'     "file
    IMPORTING
      file_name = p_file.     "file
CALL FUNCTION 'WS_UPLOAD'
   EXPORTING
     filename                       = p_file1
    TABLES
      data_tab                      = it_line
*then loop at it_line splitting it into the fields of your custom table.
loop at it_line.
          split itline at ',' into
          itab-name
          itab-surname.
endloop.
then u can insert the values into yo table from the itab work area.
regards
Isaac Prince

When we go for Flat File creatin

Hi gurus,
When we go for flat file creation.Can any one give me one Scenario with example.
Thanks in advance

Hello Srikar,
How r u ?
We go for flat file in some scenarios like,
1. The source system could not be connected to the BW System (here u could generate a FlatFile)
2. If the Customer asks for a different kind of report (in our case we do FlatFile Creation for a complex time management - Employee Working Time is 1st merged with R/3 data, then we combine both together as 1 FlatFile)
3. Sometimes the customer will give the FlatFile data generated by them
4. We also take FlatFile reports from Data Targers, using InfoSpokes
More scenarios are there,
Best Regards....
Sankar Kumar
+91 98403 47141

Custom code for Flat file reconciliation on LDAP

Hello,
I have to write a custom code for flat file reconciliation on LDAP as the GTC connector wasn't working entirely.
Could someone help me out with this.. How do i do this ??
Thanks

flat file reconciliation on LDAPWhat do you mean by Flat File on LDAP ?
If you want to create Flat File connector then search google for reading a flat file using Java.
Define RO Fields and do mapping in Process Defintion. You can use Xellerate User RO for Trusted Recon.
Make a map of CSV that and Recon Field
Call the Reconciliation API

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

Delta Upload for Flat File

Hello Everyone
i am srikanth. i would like to know wheather do we have a facility for Delta Upload for flat file. If yes can u please give me the steps.
thanks in advance
srikanth

Hi Sabrina...thank you for ur help...i did load the data from cube to ods
steps.
1. i generated export data source on the cube
2. i found the name of the cube with prefix 8<infocube name> in the infosource under DM application component.
3. there are already communication structure and transfer rules activated but when i am creating update rules for the ods..i am getting the message 0recordmode missing in the infosource.
4. so i went to infosource and added 0recordmode in communication structure and activated but the transfer rules in yellow colour..there was no object assigned to 0recordmode but still i activated.
5.again i went to ods and created update rules and activated (tis time i didnt get any message about 0recordmode).
6.i created infopackage and loaded.
a)Now my question is without green signal in the transfer rule how data populated into the ods and in your answer you mentioned to create communication structure and transfer rules where in i didnt do anything.
b) will i b facing any problem if i keep loading the data into the ods from cube (in yellow signal) ..is it a correct procedure..plz correct me..thanks in advance

How to upload a Flat file into sap database if the file is in Appl'n Server

Hello Sap Experts , Can you tel me
" How to upload a Flat file into sap database if the file is in Application Server.
what is Path for that ?
Plz Tel Me its Urgent
Thanks for all

Hi,
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures.
*& Report ZUPLOADTAB                                                  *
*& Example of Uploading tab delimited file                             *
REPORT zuploadtab                    .
PARAMETERS: p_infile LIKE rlgrap-filename
                        OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
    name1 like pa0002-VORNA,
    name2 like pa0002-name2,
    age   type i,
    END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
      wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
*    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
    CLEAR: wa_string, wa_uploadtxt.
    READ DATASET ld_file INTO wa_string.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                      wa_uploadtxt-name2
                                      wa_uploadtxt-age.
      MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
      APPEND wa_upload TO it_record.
    ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
* Display report data for illustration purposes
loop at it_record into wa_record.
    write:/     sy-vline,
           (10) wa_record-name1, sy-vline,
           (10) wa_record-name2, sy-vline,
           (10) wa_record-age, sy-vline.
endloop.

How to work on TOD files on Final Cut Pro

Hi,
I can't figure out how to work on .TOD files on Final Cut Pro. I'm using a JVC Everio HD40 camera. None of the sequence presets work. Is there a plug-in or something else I could try?
Thanks for any help!

.TOD is JVCs version of an MPEG 2 file.
Use Log and Transfer from the File menu and convert to ProRes.

How to create a flat files and how i used this

hi Guys and gals,
I am david. I want to know how to create a flat files. I don't know about it also. pls explain it and also pls help me to create a flat files. If u have any program for creating pls send me.
I want to know about retrive the datas from flat files and also insert a record into it.
pls guide me
i need this immediately
david

void newMethod() throws Exception {
     // Reading from a flat file
     String data;
     BufferedReader br = new BufferedReader(new FileReader("c:\filename1.txt"));
     while ((data = br.readLine()) != null) {
          System.out.println(data);
     // Writing to a flat file
     BufferedWriter bw = new BufferedWriter(new FileWriter("c:\filename2.txt"));
     bw.write("sample data");
     // After writing the data close the file
     bw.close();
}

Best practise around handling time dependency for flat file loads

Hi folks,
This is a fairly common situation - handling time dependency for flat file loads. Please can anyone share their experience around handling this. One common approach is to handle the time validity changes within the flat file where it is easily changeable by the user but then again is prone to input errors by the user. Another would be to handle this via a DSO. Possibly, also have this data entered directly in BI using IP planning layouts. There is a IP planning function that allows for loading flat file data but then again, it only works without the time dependency factor.
It would be great to hear thoughts or if anyone can point to a best practise document for such a scenario.
Thanks.

Bump!

Oracle OWB integrator for Flat Files 3.0

Hi,
I have installed owb 11g r2 in my machine, but while creating flat files module for file import it is showing that
it does not find *"Oracle OWB integrator for Flat Files 3.0"*. so i cannot use "import metadata using flat file wizard".
do i need to install the owb again or the Oracle OWB integrator for Flat Files 3.0 alone..or how do i integrate it with owb....... please help if anyone can,,
Thanks..

Here is the certification matrix
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=5&ved=0CFEQFjAE&url=http%3A%2F%2Fwww.oracle.com%2Ftechnetwork%2Fmiddleware%2Fdata-integration%2Fodi-11gr1certmatrix-ps6-1928216.xls&ei=mtmUUcX7DoiJrQek04DwAg&usg=AFQjCNGoOUFQHdK7Ti2DLb6vz_3s-miP3A&sig2=q3rf2foe9bl4_WbsLPwWng&bvm=bv.46471029,d.bmk

Working with flat file as source in owb 10.2

Hi,
I am working with flat file as source . While validating the mapping i am getting the following error like
" to specify a data file configure the mapping , add a node under ' Source data file', type in the file name
and select the file location."
Please give me the suggestion . It is very urgent.

Hi Venkat,
I tried the following stepts.
1. in Design Center select your mapping and right click and select configure
2. select sql loader data files and select create
3. On right hand side data file Name : enter your source file name (ex : source.csv)
4. click ok button.
5. open mapping and validate.
The mapping is validating. After validating I deployed the mapping. Up to this the mapping is working fine.
But when I start the mapping, It has completed with errors.
The error message is:
Status
Error Log
RPE-01013: SQL Loader reported error condition, number 1.
LRM-00112: multiple values not allowed for parameter 'control'
Job Summary
Updated : 2009-02-24 15:32:43.0 Job Final Status : Completed with errors Job Processed Count : 1 Job Error Count : 1 Job Warning Count : 0
Please give me the suggestions.
Thanks,
Venkat

How we create a flat file on the application server

hi,
how we create a flat file on the application servere,this file have the header data and corresponding item data also.
i.e. how we use the AT NEW and ATEND. statement in this file creation.
pls send me some code related to this.
thanks,
vipin

Hi Grafl,
Chk this link
Folder creation in AL11 using ABAP program
try this code.This works on UNIX servers
data: unixcom like   rlgrap-filename.
data: begin of tabl occurs 500,
        line(400),
      end of tabl.
dir = unixcom = 'mkdir mydir'. "command to create dir
"to execute the unix command
call 'SYSTEM' id 'COMMAND' field unixcom
                  id 'TAB' field tabl[].
<b>Reward Points if Useful</b>
Regards
Gokul

I was looking at the "Find my iPhone" app and I have a doubt regarding how it works for the macbook. In order to detect the location, the macbook should remain signed into iCloud. What if the thief logs out of iCloud. Would we able to locate the macbook?

I was looking at the "Find my iPhone" app and I have a doubt regarding how it works for the macbook. In order to detect the location, the macbook should remain signed into iCloud. What if the person who has stolen my macbook logs out of iCloud.
It should work fine for iPhone/iPad because we can enable "Restrictions" to prevent the user from signing out of iCloud. Do we have simialr settings for the macbook?
Thanks,

If it's not on the device list, it indicates that someone has gone to Find My iPhone on icloud.com and manually deleted it from the device list (as explained here: http://help.apple.com/icloud/#mmfc0eeddd), and it has not gone back online since (which would cause it to reappear on the device list; Find My iPhone has been turned of in settings on the device; the iClolud account has been deleted from the device; or the entire devices has been erased and restored.
Unfortunately, there's no other way to track the phone other than through Find My iPhone. You could call your carrier and see if they would blackliste it so at least the theif couldn't use it.

How IE works for flat file

Similar Messages

Maybe you are looking for