How is Processing time calculated in Simulation

Hi,
How is processing time calculated for every simulation-relevant object?
say for example,
i have 2 objects of person type (p1 and p1)
4 human tasks (T1, T2, T3, T4)
T1 assigned to p1, processing time 2hrs
T2 assigned to p1, processing time 2hrs
T3 assigned to p2, processing time 2hrs
T4 assigned to p2, processing time 2hrs
start --> T1(p1) --> T2(p1) --> T3(p2) --> T4(p2) --> end
Have not set any other simualtion parameters. now,
* Duration for simulation is set to 6hrs,
T1, T2, and T3 are getting processes once, but start event is getting processed twice
# Why is start event getting processed second time?
# Will this take any processing time..
* Duration for simulation set to 7hrs,
start event and T1 gets processed 2 times, T2 and T3 once..
and the total processing time becomes *8hrs*..
# At wht point of time does the second processing of T1 start.
# If it is not after after the completion of one full process cycle, in this case, why not the second processing start at the end # of 2nd hour, or 4th hour.
Thanks,
Vishnupriya

Hi Vishnupriya,
"Why is start event getting processed second time?"Can you check the "Frequency" attribute of your start event? There you can specify how often the process will be triggered.
"At wht point of time does the second processing of T1 start."You should be able to check it in the Processes (det.). It provides an overview regarding the process instances started during the simulation run. Furthermore you can check the Events (det.) category.
Best regards,
Danilo

Similar Messages

How is lead time calculated for QM notifications

Can somebody please tell me what fields are used to calculate lead time? It is field SUMDLZT in MCQMEL? Is there documentation on how this is calcuated?

MICK,
Could you give more details on the same / explain a scenario for which you need this information.
Since there has been no activity on this post for about a month , I will close this as answered , however if you still want this to be answered - mark it an unanswered and add more details to the same so that you can get more relevant answers.
Arun

PHP. How is execution time calculated?

As, unfortunately, I am rather good at programming infinite
loops, I have set
the maximum execution time on the test version of my program
to one second.
However it usually seems to take anything up to about a
minute to time out,
after which it announces that the maximum execution time of
one second has been
exceeded.
Why is there such a large discrepancy?
Clancy

.oO(Clancy)
>As, unfortunately, I am rather good at programming
infinite loops, I have set
>the maximum execution time on the test version of my
program to one second.
>However it usually seems to take anything up to about a
minute to time out,
>after which it announces that the maximum execution time
of one second has been
>exceeded.
>
>Why is there such a large discrepancy?
The set_time_limit directive doesn't set the "real" clock
time after
which the script will be killed. It's a bit more complicated
and there
are some more things to consider.
It depends on what the script is actually doing, because many
kinds of
operations like IO stuff, database operations, system calls
etc. do not
count to the execution time. If the script is just sleeping
and idling
around, it won't eat up any CPU time, so it might run a lot
longer than
just the time defined with set_time_limit.
In other cases the web server can be an issue as well,
especially when
you use a script to send large files to the browser. The
download might
take much more time than the PHP script is allowed to run,
because the
script delivers its content to the web server, which will
cache it on
its own before its delivered to the browser. And then the
script can be
finished already, while the download is still running.
So there are many things that have to be taken into account
when it
comes to determine the real script execution time.
Micha

How to show the processing time taken for a BPEL process in BAM report.

Hi All,
I have the data as below in the Data object. I would like to show the time taken for each order to complete in the report.
instance Id     order Id     product Name     product Code     price     status     instance Time      updaterName
1360010     ord004     Guitar     prod003     2000     requested     9/22/2008 12:12:11 PM     Invoke_InsertSalesOrder
1360010     ord004     Guitar     prod003     2000     Approved     9/22/2008 12:15:11 PM     Invoke_OrderStatusUpdate
This data comes from simple BPEL process where sensors are configured at the start and end of BPEL process. Also have a human task activity in between to create the time difference.
In Enterprise link design studio, I tried to calculate the time difference using expression calculator and store it as calculated field. But that doesn't seems to work because when I execute the plan, second sensor data reaches only after human approval whereas first sensor data would be waiting for calculation and ultimately nothing comes into data object.
How and where the calculation be done to show the processing time in the report. Please someone throw some light on this.
Regards
Jude.
Edited by: user600726 on Sep 30, 2008 1:30 AM

I would suggest modifying your data object so that the data can all be in a single row and use the sensor at the end of the process to upsert (update) the row created by the sensor at the start of the process. The time difference between two fields in the same row is then an easy calculation on a BAM report -- No EL plan should be needed.

How to get processing time in RMI program

Hi, all
I am a newbie in Java RMI application. I am currently developing a small calculation application using Java RMI.
My question is how can i get the processing time from client input until the server give feedback to the client?
Thanks,
Sohming

sohming wrote:
I have another question, is the default RMI using the reliable/unreliable/switchable connection?No. It is not a messaging protocol and uses direct synchronous connectivity. As such, if you get a reply it was successfully sent.
Can i test processing time using different type of protocol?You can use the same approach for testing connectivity for a range of protocols. However I suggest you run the tests many times if this is realistic for your use case.
I have a performance comparison of many messaging and RMI solutions here [http://www.freshvanilla.org:8080/display/essence/Essence+Remote+Method+Invocation] under "What are similar libraries?"
I tested my own implementation for latency and throughput and you can get the results and download the source for those tests from this page.

When using the LabVIEW Simulation Module, how can I start a frequency sweep with the Simulation Chirp signal generation VI at an arbitrary time after the simulation initial time?

I'm using the Simulation Loop on LV RT when interacting with some hardware (i.e. all I/O is happening in the Sim loop). I'm going to conduct a frequency sweep test on the hardware and want to use the Simulation Chirp function. However, there is no way (that I can see) to trigger the Chirp to start at some event (i.e. I click a boolean on the front panel and enter a case statement). The Chirp is tied to the global time of the Simulation loop and so are it's input parameters. Is there a way to make it relative to some time at which an event happens?

Craig,
Your solution will 'cut' the beginning of the signal and only show the signal afterwards.
To control when the chirp should start, the best option is to use the Chirp Pattern.vi ( in the Signal Generation palette) and use a Lookup table to control when to feed the time. The shipping example (in LabVIEW 2013) shows how to code using a lookup table.
C:\Program Files (x86)\National Instruments\LabVIEW 2013\examples\Control and Simulation\Simulation\Signal Generation\SimEx Chirp.vi
Then, to start from a toggled boolean, look at the example:
C:\Program Files (x86)\National Instruments\LabVIEW 2013\examples\Control and Simulation\Simulation\Signal Generation\SimEx Step.vi
and Here is the example in 2013 (in attachment):
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments
Attachments:
SimEx Chirp with Delay.vi ‏241 KB

How does the GR processing time affect the scheduling of the process order & the latest start date in the operation.

Hi
Can anyone explain how does the GR processing time affect the scheduling of the process order & the latest start date in the operation overview.

Hi
GR processing time means number of workdays required after receiving the material in storage.
Check this link:GR Processing time
Regards,
Anupam Sharma

How to process the PDF files at one time

Hello,
I'm using WebDynpro for ABAP and Adobe Interactive Forms as offline forms.
I collect PDF files from received e-mails.
I want them to be taken in at one time.
(for example,
system job read PDF files and create data in ERP,
or I upload the files one time.)
Please let me know
- How to process the PDF files at one time.
Best regards,
Koji

When you click the edit button in recents, try clicking the clear button in the upper left.

How to reduce processing time in case of jms to idoc scenario

hi all,
i am doing jms to idoc scenario.
in this i'm using xslt and graphical mapping.
while perfroming E2E testing the messages are taking lot of time to get processed.
please tell me as how can i reduce this processing time or in short how can i overcome this problem.this is a critical issue in production.
regards
madhu

Hi,
1. To reduce the processing time for JMS -> IDOC scenario, try to get the Average processing time taken by JMS adapter, IE, IDOC adapter for the messages that are processed so far by going thro the Adapter Audit logs, SXMB_MONI race and Time in WE02 in R/3 system. Calculate this for 5 - 10 messages at different time to get the clear idea of which step is consuming more time. Then it will be helpful to focus on tuning that specific step. If you are using BPM, check the processing time taken by PE.
2. Check the Inbound and Outbound queues used by this interface, if required try to configure Prioritized Queue with more time allocated for this interface in Integration Engine.
3. Check the load on the Integration Server when this Interface messages are getting processed, to understand/ isolate the interfaces which are consuming more processing time and system resources.
4. If this is not in Production try to perform the Mapping/ transformation in graphical mapping itself, it will be helpful to minimise use of XSLT mapping to get better performance.
5. Check if the Archive and Delete jobs are running successfully in the Integration Server, since this will free up the occupied resources in the system.
6. If possible post seperate Forum questions for issues in different Interface scenarios, it will be easy to understand the problem for all of us.
Hope this will be helpful,
Regards,
S.Santhosh Kumar

How to include processing time in the LogFormat in httpd.conf of OAS

Hi,
I want to add processing time parameter in the LogFormat of the HTTP requests in Application server logs file.
i tried to edit the httpd.conf file which orginally is as below
LogFormat "%h %l %u %t \"%r\" \"%{Cache-Control}i\" CC \"%{Cache-Control}o\" %>s %b" common
to
LogFormat "%h %l %u %t *%T* \"%r\" \"%{Cache-Control}i\" CC \"%{Cache-Control}o\" %>s %b" common
But doing so, did not add the Processing time in the GET and POST requests.Although same works for Apache HTTP server.
I want to know how do i add the Processing time attribute in the LOGFormat.
By Default the LogFormat is Common, what are the other possibilities fpr LogFormat.
Please revert.
Regards
Ak

Hi,
1. To reduce the processing time for JMS -> IDOC scenario, try to get the Average processing time taken by JMS adapter, IE, IDOC adapter for the messages that are processed so far by going thro the Adapter Audit logs, SXMB_MONI race and Time in WE02 in R/3 system. Calculate this for 5 - 10 messages at different time to get the clear idea of which step is consuming more time. Then it will be helpful to focus on tuning that specific step. If you are using BPM, check the processing time taken by PE.
2. Check the Inbound and Outbound queues used by this interface, if required try to configure Prioritized Queue with more time allocated for this interface in Integration Engine.
3. Check the load on the Integration Server when this Interface messages are getting processed, to understand/ isolate the interfaces which are consuming more processing time and system resources.
4. If this is not in Production try to perform the Mapping/ transformation in graphical mapping itself, it will be helpful to minimise use of XSLT mapping to get better performance.
5. Check if the Archive and Delete jobs are running successfully in the Integration Server, since this will free up the occupied resources in the system.
6. If possible post seperate Forum questions for issues in different Interface scenarios, it will be easy to understand the problem for all of us.
Hope this will be helpful,
Regards,
S.Santhosh Kumar

HT201274 My iphone4 is taking more than 5 hours to erase all the data still it is under process , still how much more time i have to wait for my mobile to ON

My iphone4 is taking more than 5 hours to erase all the data still it is under process , still how much more time i have to wait for my mobile to ON ?

I'm having this EXACT same problem with my iPhone 4, and I have the same computer stats (I have a Samsung Series 7)

SSAS 2008 - How to get processing times per dimension / measure group?

Hi experts!
SSAS 2008. I am doing analysis and I'm trying to get information (from dmv or log) about processing times per dimension / measure group. Any ideas how to do that?
Thanks,

also in DMV there's no column recording the processing time, so we suggest you using SSAS AMO to programmatically get the state and last processed date time. Please see:
Analysis Management Objects (AMO)
Hi John,
Thanks for you info, As
Simon Suggested there is no DMV columns available.
You can use below link for more information.
Programming Administrative Tasks with AMO
Cube
partition attributes for last processed (timestamp and status)
Thanks
Suhas
Mark as Answer if this resolves your problem or "Vote as Helpful" if you find it helpful.
My Blog
Follow @SuhasKudekar

Each time I open foxfire a popup asking how to process a download opens and inhibits use of foxfire. How do I stop the popup?

each time I open foxfire a .LNK popup appears asking how to process a download opens and inhibits use of foxfire. How do I stop this and allow me to open and use foxfire browser. This started after I attempted to follow directions to install/associate a .LNK program/file with foxfire to control saving downloads using any browser. Note that I am a novice user. How can I stop this?

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

How can i format my macbook 10.5.8 to snow leopord i am doing first time format how its process and do i need to formet or upgrade and i have a snow leopard DVD????

how can i format my macbook 10.5.8 to snow leopord i am doing first time format how its process and do i need to formet or upgrade and i have a snow leopard DVD???

First, I'd advise you to make a backup. Time Machine is fine, but I recommend making a bootable backup with Carbon Copy Cloner if possible.
Then, insert the Snow Leopard DVD (it's a retail version, right? Not a grey disk meant for another machine?) and run the installer on the disk. Should be automatic from that point in. You don't need to reformat your drive.
Matt

How to find the processing time of any query?

im using oracle express edition, can anyone help me, how to find the processing time of any query?

Trace the query and tkprof the generated trace file.
http://download.oracle.com/docs/cd/E11882_01/server.112/e16638/sqltrace.htm#PFGRF01010

How is Processing time calculated in Simulation

Similar Messages

Maybe you are looking for