How is the New Forum Structure Working for You?

Just wanted to ask how the breakout of CS5 and then other PrPro/Pr versions is working for you.
Though not all that warm to the idea, I have to say that it seems to be working nicely. I have seen few posts in the wrong spots, though some might be better suited for Hardware.
My fears have NOT been realized, so I am glad that the powers that be never consulted me, as I would probably have turned thumbs down. Early observations indicate that I would have been wrong.
What do you think?
Hunt
PS - remember, "points" are at stake here folk!

Well, since I was one of those who asked that CS5 be in a separate section, I like the fact that it now IS by itself
As far as posts in the wrong place... that will always happen and all we can do is continue to point people in the right direction
I scan for new messages in ALL the Premiere sub-Fora, and will continue to do so to keep learning

Similar Messages

  • How's Adobe Media Encoder CS5 working for you?

    This is the first thread on the new Adobe Media Encoder forum, so I thought that it would be appropriate to open it up by just asking a general question:
    How is Adobe Media Encoder CS5 working for you?
    Please be sure to install the Adobe Media Encoder CS5 (5.0.1) update. Instructions for updating are included in this post about the Premiere Pro CS5 (5.0.2) update.
    If you're having a specific problem that you want help with, or if you have a specific question, please start your own thread on this forum. This thread is intended for general feedback about how Adobe Media Encoder CS5 is working out for you.

    First of all IT IS GREAT and I use it a lot I also used the CS4 version before!
    But I have to report two issues about version CS5:
    1. I bought the English version of the production premium CS5 but I have a German operating system (win7 64bit) all other adobe application are in English except Adobe Media Encoder it shows up in German language! Not a show stopper but should be fixed.
    2. Recently I wanted to encode a video into an h264. I made some custom settings for that and the encoded video played very stuttered in Microsoft Media Player 12 (like 12fps instead of 25fps [settings were set correct in AME]) but fine in Quicktime and VLC Player (execpt for the gamma bug but that's an other story...)
    I did a lot of testings and found the issue! Sometimes when you change a lot of the h264 settings (don't know when it happens exactly) Media Encoder seems to not set the fps correctly allthough AME shows 25fps in it's settings this setting is not encoded into the final file!
    Quicktime and VLC seems not to care about the missing information but Windows Media Player gets confused.
    It does not happens when using a preset in AME it only happens when changing a lot and using custom settings!
    You can see the missing fps setting when right clicking the encoded file and choose properties (german:Eigenschaften) switch the tap to Details and there is no fps setting in the stuttering files but when encoded with a preset in AME there is the correct 25fps setting!
    I have attached a screenshots to demonstrate it:
    My workaround so far was to choose a preset with 25fps and close to my desired settings and change as few as possible - Fingers crosses and with a chance of 3/4 I was able to encode a working file containing the fps setting in it which plays perfect in Microsoft Media Player!
    I hope you take a look into this issue because if you have a long file and you have to encode it again because it fails....... uiuiui
    Thanks Todd for the possibility to give this direct feedback to Adobe
    This is real support!

  • Is the new "messages" app working for your networked home users?

    I'm seeing a very odd issue where the new 10.8 "Messages" app not acting properly for users with a networked home directory.  If logging in on the server, the users' Message app works just fine.  When logging on from a client mounting their home directory over the network, the Messages app can send messages fine, but does not receive messages.  What is odd is that the app does get the signal that the person is responding to an outgoing message showing their avatar and "...", so something is being recieved, but no message ever shows up.
    Anyone else seeing this on client systems?
    Thanks,
    O

    I've got messages server running on Mountain Lion Server (fresh install) and both 10.7.4 and 10.8.0 clients are able to message each other, the 10.7.4 clients are network home users but I was forced to change the 10.8 user to a mobile home account because everytime they opened Mail all there contacts would get deleted.
    Assuming your client are on 10.8 you have probably found another network home bug, consider switching to mobile homes until it is fixed

  • How does the new shuttle control work in Apex 3.1?

    Hi,
    I have tried creating a shuttle type control in Apex 3.1. I have based it on a list of Items from my Items table. I can move Items from the left side to the right, and from there I can move them up & down, but whatever I do only seems to affect the page display and has no effect on my tables.
    Can anyone explain how this control works and what it's meant to do? Could I, for example, use it to copy records from one table to another?
    Many thanks,
    Keith.

    Keith,
    The Shuttle is a type of multi-select. It produces a comma delimited string of your selected values. It is useful in wizards, where you need to select multiple items from a single list (like selecting columns from a table). You can also use it against a 'real' table if you have not normalized. Let's say you have a table that stores meetings and one column lists the people invited. You could use a shuttle to select invitees (using an lov from your people table).
    -- Sharon

  • How does the "On Sale" option work for e-commerce?

    I can't seem to find any documentation for this. What code is required & how do I set this up please?

    As mentioned in the other post,
    It is a tick and a tag that is true or false.
    You have to manually change the product price to indicate it is lower price and then use the tag and CSS to style. It is not what your thinking it is with dynamic price changing

  • How has Yahoo! Mail been working for you the last few days?

    Has anyone seen any improvements? What about sent mail, has everything actually indeed been sent? Has "push" mail improved? For me I've found all my sent mail has been sent since Monday AM, but I have been power cycling my iphone 2 to 3 times a day(maybe that has something to do with it), as far as "push" mail, still the same for me, sometimes I get the message right away, other times with a delay of around an hour.
    Cheers

    I don't send much email from my iPhone so haven't noticed any problems with that, but I have noticed Yahoo push working very well (virtually instantly) for the last couple of weeks. I have a job where my phone needs to be turned off on a daily basis and often 3-4 times per day. Take from that what you will...

  • How does the new Open Action work?

    I´m trying to tell a button to start the timeline from a certain position. In the 2014 version the open actions menu is different from the previous. I don´t understand where I´m supposed to write the number for the timeline in the box that pops up. In the previous it wasn´t a problem, but now I can´t write the number if I don´t also choose a target for for the action. But I don´t have a target? I just want the timeline to start from 1000.

    Well, I had to choose stage as target apparently. Problem solved.

  • How has the pre-order process work for phones?

    I have some questions pertaining to prior phone pre-order processes.  I will be upgrading to the next iphone, whenever it launches.  When I pre-order do I pay the full price for the phone, or do I just pay the upgrade price?  Also, do most pre-ordered items arrive the day of launch, or do they ship day of launch?
    Thanks folks.

    What price you pay is completely dependent on whether you are eligible for a subsidised upgrade from your carrier.
    Usually, most pre-ordered items are scheduled to be delivered on launch day.

  • How do I get the new iPod to work with iTunes

    I recently purchased a new iPod--I think it's the "Shuffle," whichever one retails for $150. When I plugged it into my iMac, it said I needed to install iTunes 10 to run it. When I checked for updates, it said that iTunes 9.xyz (whatever came after the 9) was the latest version.
    How do I get this new iPod to work. As you can tell, I am not much of a gadget junkie, and I'm a bit of a technology incompetent, which is why I purchased the Mac to begin with. I have an iMac, have no idea what operating system I am using--whatever came with it when I purchased it in November, 2008.
    TIA!

    Okay, I just looked and I do have 10.411. How do I upgrade to get the new iPod to work, and how much does the new operating system cost?

  • TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4)  I have done everything the troubleshooting article has said and it is still not working properly.

    'm having a problem with downloading and installing the new version of itunes for windows (11.1.4)  I have done everything the troubleshooting article has said and it is still not working properly.  I have even done a repair to see if that works and it has not.  Has anyone else found a new way to get it working?

    Try Troubleshooting issues with iTunes for Windows updates.
    tt2

  • TS3212 I need to download the new version of Itunes for my current account, not set up a new account but can not figure out how to do it.

    I am trying to download the new version of iTunes for my existing account, not set up a new iTunes account.  How do I do this?

    The requirement shoul be on the box the iphone came in.  they are also on the website
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.7 or later (free download from www.itunes.com/download)"

  • HOW DOES THE NEW MBOX 2 MINI WORK WITH THE MAC MINI?

    I have a old original Mac mini 1.25GHz with 1 GB SDRAM - 40GB Ultra ATA drive, 4x SuperDrive (DVD±RW/CD-RW) OS 10.3
    I also have just added the new MAC MINI 1.66 CTO OS 10.4
    with the following configuration:
    * Processor 065-6673 1.66GHz Intel Core Duo
    * Memory 065-6676 1GB 667 DDR2 SDRAM-2x512
    * Hard Drive 065-6750 120GB Serial ATA drive
    * Optical Drive 065-6679 Combo Drive
    In addition, I have a MicroNet 150 GB external hard drive.
    The 3 are linked together so that the icons for the MircroNet and the old Mac mini are shown on the New Mac mini desktop.
    I’ve kept the New MM as is for apps, moved most of the files and folders to the MNet, and have done a reinstall on the old MM, getting rid of almost everthing that was on it originally except the OSX and apps.
    I’m thinking about using the old MM to set up a recording studio. This would involve the new MBox 2 Mini with ProTools LE. For details, just Google it. It comes 2 ways, configured for the G4 MM or for the new Intel MM. I’d rather not clutter up the new MM with this, as sometimes the Digidesign Pro Tools apps can be a bit toxic.
    If I get the MBox 2 Mini and run it on the old MM, will this work? Has anyone tried this? Do I have enough processing power and speed, ram and hard drive space?
    Thanks!
    Larry Miller
    Cambridge MA
    MAC MINI 1.66 Intel Core Duo, Mac mini 1.25GHz MicroNet 150 GB external hard drive.   Mac OS X (10.4.8)  

    Hi Larry,
    I just purchased a Mbox 2 Mini. I am running it flawlessly with my Core Duo 1.66Ghz Mac mini w/2GB RAM.
    I have not seen the two versions for Intel and PPC Macs as you described. Digidesign only produces one box...compatible with Mac or PC.
    The Digidesign site states that the Mbox 2 Mini is compatible with your 1.25GHz mini, but Pro Tools LE 7.3.x requires Mac OS X Tiger 10.4.x, not Panther 10.3.x.
    You would get far better perfomance using the Intel mini over the PPC. And, you would get better perfomance by maxing the RAM out as well.
    C

  • What is the new data structure for .RTM files in LV8?

    We have software that translates our LV
    program to another language.  Part of that software package reads RTM
    files, decodes them, replaces text, and resaves them.  That code is
    broken for menus that are saved in LV8+, however.  What is the new data
    structure?
    The simple attached zip file has vi's which
    are not ours but serve to illustrate the point.  If it's run on an
    older RTM file, it correctly outputs and XML version of it, on newer
    RTM files it just throws an error.
    -- This is the second time I posted this.  I was curious what the Solution? icon did on somebody elses post and I apparently marked the whole thread as solved (there should really be an undo on that feature btw --
    Attachments:
    RunTime_Menu_to_XML.zip ‏33 KB

    Hi Thomas,
     What error are you getting when running the program?  I was actually able to run it without errors in LV 8.6.  
    There are ways to programmatically read and customize RTM files in LabVIEW.  I hope that the following links will help:
    http://zone.ni.com/reference/en-XX/help/371361B-01/lvhowto/customizing_shortcut_menus_programm/
    http://digital.ni.com/public.nsf/allkb/17803AA31C8C07C986256CFD0080D609?OpenDocument
    Cheers, 
    Marti C
    Applications Engineer
    National Instruments
    NI Medical

  • HT1277 How do I make Mail remove junk/deleted messages from the server? The only option tht works for me now is the "Remove from server" button at Account Info Messages on server.

    How do I make Mail remove junk/deleted messages from the server? The only option tht works for me now is the "Remove from server" button at Account Info > Messages on server. What am I doing wrong?

    Mail > Preferences… > Accounts > Advanced > Remove copy from server after retrieving a message

  • Hi, I have an iphone 5 and unfortunately got sat on and is now bent, it worked fine bent for 3 months as the glass did not break, today how ever the screen has stopped working. Is it possible to get hold of another casing and have the electronics changed

    Hi, I have an iphone 5 and unfortunately got sat on and is now bent, it worked fine bent for 3 months as the glass did not break, today how ever the screen has stopped working. Is it possible to get hold of another casing and have the electronics changed ?

    You didn't look hard enough:
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model
    Out-of-Warranty Service
    iPhone 5s, iPhone 5c,
    iPhone 5
    $269
    iPhone 4S
    $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone
    $149

Maybe you are looking for