How many files are there in a folder with subfolders ?

¿How do I count the files in a folder with subfolders?

Niel's advice is hardly complicated, but try this one.
1. Download the free EasyFind.
2. Open the app and set the options as shown here:
3. At the right of the interface, choose which drive you want to count all files of.
4. In the search field, enter a single asterisk * and press Enter.
It will list only visible files in all folders and subfolders. I did this to a drive that didn't have a whole lot on it. This count at the top of the list of items was:
I copy/pasted the output into TextWrangler to see how many lines there were. 401 was the correct number of visible files. The value 441 was the total number of files on the drive including hidden items and folders.

Similar Messages

How do I find out how many fans are there in a router with the help of CLI? Specifically cisco3845 with ios c3845-spservicesk9-mz.124-3b.bin

       I have an issue where show env o/p is as below, I suspect the FAN 1 which shows failed is not present in router, how do i find out with the help of CLI , how many fans are present in router.
#show environment all
SYS PS1 is present.
       Fan status: Normal
       Input Voltage status: Normal
       DC Output Voltage status: Normal
       Type: AC
       Thermal status: Normal
SYS PS2 is present.
       Fan status: Normal
       Input Voltage status: Normal
       DC Output Voltage status: Normal
       Type: AC
       Thermal status: Normal
AUX(-48V) PS1 is absent.
AUX(-48V) PS2 is absent.
Fan 1 Failed
Fan 2 Normal
Fan 3 Normal
Fan Speed is Normal
Alert settings:
Intake temperature warning: Enabled, Threshold: 55 Core temperature warning: Enabled, Threshold: 70 (CPU: 90)
Board Temperature: Normal
Internal-ambient temperature = 28, Normal CPU temperature = 41, Normal Intake temperature = 22, Normal Backplane temperature = 19, Normal
Voltage 1(3300) is Normal, Current voltage = 3284 mV Voltage 2(5150) is Normal, Current voltage = 5153 mV Voltage 3(2500) is Normal, Current voltage = 2525 mV Voltage 4(1200) is Normal, Current voltage = 1203 mV
Nominal frequency

This means that FAN1 has failed.
Fan 1 Failed
Feb 14 07:31:01.996 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:31:21.996 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:31:41.995 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:32:01.994 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported. Feb 14 07:31:01.996 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:31:21.996 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:31:41.995 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Feb 14 07:32:01.994 GMT: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.

How many softwares are there to create a setup file for java programs

Hi, i am new to java
I want to know how many softwares are there to create a setup file for java programs.
I know one software i.e java launcher to create a setup file.
I want to know about any other softwares are available to create a setup file for java programs.
I created a setup file for swings program in JCreator.
And don't think that i am wastiing ur time with this question .
Help me regarding this topic.
Thanks in Advance

superstar wrote:
I want to know how many softwares are there to create a setup file for java programs.13, no wait, 42.
I know one software i.e java launcher to create a setup file.You should clearly identify what you think you already know.
I want to know about any other softwares are available to create a setup file for java programs.
I created a setup file for swings program in JCreator.Is this the one you talked before, or is this different?
And don't think that i am wasting ur time with this question .Why should I not think that?

How many screens are there in module pool

hi gurus
can anyone suggest me
how many screens are there in module pool
thank you
regards
kals.

see this link for better understanding of dialog programming/module pool programming.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9ce935c111d1829f0000e829fbfe/content.htm
see this
Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
Regards.
Chandru

How many states are there in a second?

Hi
I have to make an animation in fireworks and I am working in seconds.
I can't work out how many states are there in a second.
Please help.
Thanks in advance.

Not really sure what you are asking. If it is the speed of playback then go to the States panel and to the right is a number. Click it. It says 7/100 sec delay. Change this to alter playback speed. It's been ages since I've done animation in Fireworks

How to calculate how many calls are there in Queue

Hi All,
I have a requirement of calculating how many calls are there in queue at a particular moment, as the client wants to drop all the calls if there are 5 calls waiting in the queue.
I am using ICM 8.0
Any help would be great.
Thanks

Hi David,
I am trying to crete a IF condition with CallType.callsqnow property, however callsqnow is not coming up in the list for calltype properties.
But under Skillgroup's property list, there is a pooperty "callsqueuednow". I am trying with this property, let's see if it works.
However could you please advice why i am not seeing callsqnow property under call type?
What i am doing is
under if formula, select "call type" -> select name of the call type -> list of properties
I am using ICM version 8.0.3.0

How can I print the tutors for numbers app, and how many pgs are there

can I print out a hard copy of tutor for numbers that I have purchased. If so about how many pgs are there-thks

Ask the Tutor for Numbers app developer > Contact Us - Noteboom Productions

How many wagetypes are there

How many wagetypes are there.
Thanks In advance

Dear,
We have 3 types of WTs
Primary wage type
Secondary wage type
Technical wage type
Please refer this link for details,
[ Wage Type |http://www.sap-img.com/hr019.htm]
Regards,
R.Brahmankar

How many documents are there in this Package?

Is there an easy way to determine how many documents are in an existing Package?
At the moment I work around it by using Search on a character pretty much guaranteed to be in them all, but I'd expect it to be a property stored somewhere?
Acrobat Pro v8.1.2

Apple in a press release from 2012 claimed more than 45,000 movies, but did not provide any details as to that figure. And it changes rapidly, and it would be different for each country, so unless someone went in and counted them manually in your country's iTunes Store, there won't be an accurate figure available.
Regards.

How can I contact with Adobe Systems because I want to know how many licenses are there and if its includes Bridge?

I want to buy Creative Cloud, but I don't know how many licenses are included
and I don't know if Bridge program is include too
I hope you can help me
I rang to 900810339 but nobody respond to phone
thak U

I want ask too about that

How many people are there in the Creator team?

Can it be made available that how many people are working for deveolping this IDE? How many softwate engineers and developers? How many managers?
thanks.

No, we can't give you that level of detail. Resource staffing at Sun, like most companies, is strictly company confidential information.

How many JVM are there in a computer?

For exemple, I open two dos windows in WIN98, and type "java x" "java y " seperately in the two dos windows. How many JVM are running in my computer?
Thanks!

Good day,
As far as I can tell, I would say that only one client JVM can be active at anypoint of time, however since Java is a multi-threads program, you will end up with more active threads in your system while the applications will be running, somehow similar to a Windows application, such as Word when you have more than one opened document at once.
To have a better evaluation of the system requirements and usage, such as the memory, handles, threads, active processes etc, I would strongly suggest you do to a search for TaskInfo 2003. I've been evaluating that program for the last few days and I'm amazed by the different pieces of information that program can provide.
By the way, I'm not affilited to the TaskInfo developper in any way shape or form, I just mentioned it based on my current evaluation.
Hope that helps.

Hai How many servers are there in Netweaver

HI,
Please can any one tell me how many servers are present in Netweaver platform and can u please tell me the differnce between netweaver and previous one which is in usage.
Wht are the advantages over it and disadvatages if any.
Wht is the role of BI in netweaevr platform
.Regards,
Chandu

Hi,
Check the below threads for detail information:
Netweaver
SAP netweaver
What is Netweaver
Reg
Pra

How many iPhones are there to date?

and how many iPhones will there be in the future?

1: http://en.wikipedia.org/wiki/List_of_iOS_devices#iPhone
2: Unknown

Obvious Way to Tell How Many Files are Selected?

I’ve been trying my best to love Lightroom, and I get close, but there’s one problem that I just can’t get past.
Five minutes ago, I tried to export one photo, and I ended up exporting 52 photos. This happens all the time. If I had a dime for every time I exported 500 photos instead of 1 photo, moved 500 photos instead of one photo, etc, I’d have a lot of dimes.
Anyway, I deleted the 51 extra exports, synced the folder, got everything where I wanted it, then … exported 52 photos again.
Sigh.
The only way I’ve been able to avoid this is in the past is by obsessively pressing Command+D. When I’m trying to do anything, I pound these two keys like there’s no tomorrow, but of course, I have to re-select the files I do want to perform actions on.
I kept thinking I’d get used to it, but I’m still having problems to no end. Unless I look very, very closely, I can’t tell if photos are selected or not, and if an entire screen full of photos are selected, they all look the same, so I really can’t tell.
That’s the background, now my questions if I may:
Is there any way to get a dialog box before performing actions on multiple photos? Something that says, “this action will be performed on 1,871 photos, do you want to proceed?” or something to that effect?
Ironically, it already does this when I want to delete something, which is great, but no such luck for any other actions.
By any chance, is there something I can do to make the number of photos I have selected, more obvious?
I know this is not a bug or program flaw, it’s a flaw with how my brain works with the program, but if I could figure out a way to make them work together , this application would be pretty awesome. As it is, I spend more time undoing mistakes than I do organizing and editing photos.
Thank you very much for any help.

I am so pleased to read your post and realize I'm not the only one that gets tripped up by this! I've bee using LR extensively for more than two years now and even today, just now, I wanted to export ONE file, and the highlighting onscreen appeared to indicate I've selected one file, but turned out it was dozens of files. Now... when I'm simply exporting copies of files to another folder it's not a dangerous situation. BUT! It is very dangerous if one wishes to delete a file or several files and you think those are the only files you're deleting. Many, many times I have caught this in time, fortunately. To me this is one example of how the experience of software designers do not well understand how the end user will understand a program. Professional photographers are very specific with everything they do and don't want a program tripping them up continually. This obvious confusion over which files are actually "selected" needs cleared up.
I read the responses to your post and find them dissatisfying. Please, Adobe, test your software with actual working photographers and not just Adobe engineers who may also happen to be amateur photographers.

How many files are there in a folder with subfolders ?

Similar Messages

Maybe you are looking for